Anti-mildew is used to treat wood, concrete, brick and other surfaces with an absorbent capacity in order to prevent and destroy microorganisms (mold, fungus, algae, blue) in residential premises and in places with high humidity (bathrooms, basements, cellars , hotbeds, etc.). Recommended to be added to chalk and cement mortars, as well as to water-based paints. It can be added to unmodified plaster, masonry mortars, putty as a biocidal additive instead of mixing water. The tool perfectly sanitizes the surfaces of walls, brickwork, ceilings, interpanel seams. Has a long-lasting effect.
preventive protection against microorganisms (mold, fungus)
good weather resistance
does not exfoliate
allows coating with water-based paints.
Apply the product with a brush, roller, spray 2-3 times after each previous layer has dried. When treating an already affected surface, apply the agent, after 24 hours clean the surface and repeat the treatment. When processing mineral surfaces directly exposed to water, cover it after drying with a water repellent GKZH-11 or waterproof paints and varnishes. Average consumption 100-150 g / sq. m on mineral grounds and 200-300 gr./sq. m for wood. When used as a biocidal additive in mortar mixtures, test with a small amount for compatibility.
Water-borne paint: add 250 ml of paint to 20 liters of paint and mix thoroughly.
Additive to plaster: 250 ml of the product is enough for 10 liters of water. Grout or plaster is mixed on the resulting solution.
Grout: 50 ml is added to the mixing water per 5 kg of dry mass.
Additive to wallpaper glue: add about 25-30 ml of active agent per 1 liter of water to the glue mixing liquid, then prepare the glue according to the instructions.
Precautions: When working, use protective equipment for skin, eyes and respiratory organs (rubber gloves, overalls, glasses, respirator). In case of contact with skin, mucous membranes, eyes, rinse immediately with plenty of running water for 10-15 minutes. Seek medical attention if necessary.
Danger: Possible irritant effect on the skin.
Storage and transportation: Transport and store at temperatures from + 5 ° C to + 40 ° C, in a hermetically sealed original container, separately from food, in a cool ventilated room, out of the reach of children and animals. Avoid heating and direct sunlight. The composition retains its properties after short-term freezing. Dispose of in accordance with SanPin 188.8.131.522-03
Shelf life: 36 months
Composition: an aqueous solution of active target antiseptic components
Manufactured in accordance with TU 20.20.14-004-24851300-2019
You might like
Inform manager that you found the product on Qoovee