Heating equipment and supplies in bulk on Qoovee

Good day! The company is ready to offer you Coal a premium fraction of 0-50 .: GOST at a price of 47 USD / ton, price with loading on the car. with VAT directly from a coal mine: Kazakhstan, Rostov-on-Don. We work directly with the cut. Therefore, our price is lower than the market. Ash content,% - 5-13 Mass fraction of total moisture - 14.5 The yield of volatile substances - 43,5 Mass fraction of total sulfur - 0.5 Heat highest combustion in a dry ash-free state - 7300 kcal / kg Heat of combustion for working condition - 6500-7500 kcal / kg The minimum volume of 5000 tons. We work ONLY as follows: - fill out the official application with the company details! -on further we send the contract for signing! -we make an invoice for payment! After paying the invoice, you will be provided with all shipping documents. The price varies depending on the declared volume. Non-cash form of payment, 100% prepayment! If you are interested in our offer! Please download the order form! and send to our email address: WE WORK ONLY THROUGH THE CONTRACT !!!

Good day! The company is ready to offer you a premium coal fraction of 50-300 .: GOST at a price of 49 USD / ton, the price with loading on the car. with VAT directly from a coal mine: Kazakhstan, Rostov-on-Don. We work directly with the cut. Therefore, our price is lower than the market. Ash content,% - 5-13 Mass fraction of total moisture - 14.5 The yield of volatile substances - 43,5 Mass fraction of total sulfur - 0.5 Heat highest combustion in a dry ash-free state - 7300 kcal / kg Heat of combustion for working condition - 6500-7500 kcal / kg The minimum volume of 5000 tons. We work ONLY as follows: - fill out the official application with the company details! -on further we send the contract for signing! -we make an invoice for payment! After paying the invoice, you will be provided with all shipping documents. The price varies depending on the declared volume. Non-cash form of payment, 100% prepayment! If you are interested in our offer! Please download the order form! and send to our email address: WE WORK ONLY THROUGH THE CONTRACT !!!

Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. Design The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Delivery - 8 m3 / h Pump outlet pressure 16 MPa Weight-660kg European quality-Ukrainian price!  

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 up to plus 200 ° C). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Flow rate - 4.0-10 m3 / h Pump outlet pressure 10 MPa 1 year manufacturer's warranty! Order European quality at Ukrainian prices!  

Plunger metering pump units ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a solid non-abrasive phase concentration of not more than 10% by mass, with a maximum particle density of up to 2000 kg / m3, with a grain size of a solid non-abrasive phase no more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Technical characteristics of the pump НД 25/400 К 14: Feed-25 l / hour; The pressure at the outlet of the pump is 400 kgf / cm2; Hydraulic part K - steel 12Х18 Н10 Т Order a Ukrainian pump ND from the KhNZ Trading House!

Plunger metering pumps ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with a kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a concentration of a solid non-abrasive phase of not more than 10% by mass, with a maximum density of particles up to 2000 kg / m3, with a grain size of a solid non-abrasive phase not more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Specifications: Feed-25 l / hour; Discharge pressure-250 kgf / cm2; Execution of the hydraulic part K - steel 12 X 18 H10T; Order time-tested quality!

Name: Heated kit "Penguin-T" Part numbers (examples): TPL-PINGVIN-K1-XX / XX TPL-PINGVIN-K1-48 / 41 (vest / insole size) Features: Size: 48 to 56 Power: 12 Volt Upper fabric: Cloak fabric 240T / stitch square 5x5 / synthetic winterizer 200 gr / heating elements, removable (hidden under the lining) Weight: 700 gr. Set: Vest "HotWalker-G" Heating elements 11x63 + 11x63 cm Insoles with heating 1 pair Extension for insoles 1 pc Power cord in cigarette lighter 2pcs spiral

Name: Flexible heating element 18x54 cm Article: TPL-EL-1854-JACK2.1 / F Characteristics: Size: 18x54 cm Power supply: 12 to 14 Volts Current consumption (for 12V): 1.3A / Power: 15.6 W Current consumption (for 14V): 1.6A / Power: 22.4 W (* Element resistance: 9 Ohms, with errors) Heating temperature (under clothes): 45 to 57 ° С Wire length (default): 50 cm Connector (default): socket 2.1x5.5 mm Weight: 50g. Set: item Warranty: 12 months

Name: Flexible heating element 30x37 cm Article: TPL-EL-3037-JACK2.1 / F Specifications: Size: 30x37 cm Power supply: 12 to 14 Volts Current consumption (for 12V): 1.3A / Power: 15.6W Power consumption current (for 14V): 1.6A / Power: 22.4W (* Element resistance: 9 Ohms, with errors) Heating temperature (under clothes): 45 to 57 ° С Wire length (default): 50 cm Connector ( default): socket 2.1x5.5 mm Weight: 50g. Set: item Warranty: 12 months

Name: Flexible heating element 9x24 cm Article: TPL-EL-924-USB / M Specifications: Size: 9x24 cm Power supply: 5 to 7.4 Volts Current consumption (for 5V): 0.7A / Power: 3.5 W Current consumption (for 7.4V): 1A / Power: 7.4 W (* Element resistance: 7.2 Ohms, with errors) Heating temperature (under clothes): 45 to 65 ° С Wire length (default): 50 cm Connector (default): USB Weight: 20g. Set: item Warranty: 12 months

Наименование: Ковёр с инфракрасным подогревом Артикул (примеры): TPL-KVP-120150/R-G (с регулятором цв. графитовый) TPL-KVP-120150/V-S ( с выключателем цв. серый) Характеристики: Размер: 120х150 см Питание: 220 Вольт Мощность: 350 Вт Температура нагрева: от 45 до 55 °С Длина провода: с выкл-ем 1,9м / с регулятором 2,2м Режим обогрева: вкл./выкл./регул. (зависит от модели) Под заказ установим предохранительный термодатчик Варианты расцветок: графитовый / серый Вес: 2.5 кг Комплект: коврик Гарантия: 12 месяцев

Наименование: Коврик с инфракрасным подогревом Артикул (примеры): TPL-KVP-54190/R-G (с регулятором цв. графитовый) TPL-KVP-54190/V-S ( с выключателем цв. серый) Характеристики: Размер: 54х190 см Питание: 220 Вольт Мощность: 225 Вт Температура нагрева: от 45 до 55 °С Длина провода: с выкл-ем 1,9м / с регулятором 2,2м Режим обогрева: вкл./выкл./регул. (зависит от модели) Под заказ установим предохранительный термодатчик Варианты расцветок: графитовый / серый Вес: 2 кг Комплект: коврик Гарантия: 12 месяцев

Наименование: Коврик с инфракрасным подогревом Артикул (примеры): TPL-KVP-54150/R-G (с регулятором цв. графитовый) TPL-KVP-54150/V-S ( с выключателем цв. серый) Характеристики: Размер: 54х150 см Питание: 220 Вольт Мощность: 175 Вт Температура нагрева: от 45 до 55 °С Длина провода: с выкл-ем 1,9м / с регулятором 2,2м Режим обогрева: вкл./выкл./регул. (зависит от модели) Под заказ установим предохранительный термодатчик Варианты расцветок: графитовый / серый Вес: 1.5 кг Комплект: коврик Гарантия: 12 месяцев

Наименование: Коврик с инфракрасным подогревом Артикул (примеры): TPL-KVP-5470/R-G (с регулятором цв. графитовый) TPL-KVP-5470/V-S ( с выключателем цв. серый) Характеристики: Размер: 54х70 см Питание: 220 Вольт Мощность: 75 Вт Температура нагрева: от 45 до 55 °С Длина провода: с выкл-ем 1,9м / с регулятором 2,2м Режим обогрева: вкл./выкл./регул. (зависит от модели) Под заказ установим предохранительный термодатчик Варианты расцветок: графитовый / серый Вес: 0,8 кг Комплект: коврик Гарантия: 12 месяцев

Наименование: Коврик с инфракрасным подогревом Артикул (примеры): TPL-KVP-5056/R-G (с регулятором цв. графитовый) TPL-KVP-5056/V-S ( с выключателем цв. серый) Характеристики: Размер: 50х56 см Питание: 220 Вольт Мощность: 50 Вт Температура нагрева: от 45 до 55 °С Длина провода: с выкл-ем 1,9м / с регулятором 2,2м Режим обогрева: вкл./выкл./регул. (зависит от модели) Под заказ установим предохранительный термодатчик Варианты расцветок: графитовый / серый Вес: 0,6 кг Комплект: коврик Гарантия: 12 месяцев

Name: "HotWalker" heated seat Article: TPL-SEAT-MOB-1 Characteristics: Type of placement: mobile, portable Size (including battery mount w / d / h): 42x33x0.8 cm Heating zone: 13x25 + 13x25cm Food : 5 to 7.4 Volts Current consumption (for 5V): 1.2A / Power: 6 W Current consumption (for 7.4V): 1.8A / Power: 13.3W (* Cell resistance: 4.2 Ohm, with errors ) Heating temperature (under the body): from 38 to 50 ° C Two outgoing wires for power selection Connectors (power wires): 2.1x5.5 mm + USB Weight (without battery): 80g. Materials: waterproof textile, bottom fabric with PVC. Color: gray by default. Battery type for power supply: any, with dimensions not exceeding 19x9x2 cm. It is possible to connect to a computer or to a network via an adapter. Set: heated seat, heat-insulating battery cover. Warranty: 12 months

Профессиональный парогенератор для фитобочки Тула - это компактное и надежное устройство, создающее заданный температурный режим в мини-парной. Принцип его работы прост: вода нагревается с помощью электричества и преобразуется в пар с заданными характеристиками.

Мощность 3.0 кВт подходит для парных до 3 м3для встроенных парилок со стенами из легких материалов (закаленное стекло или акрил). Для парилок с толстыми стенами или вентиляцией используйте парогенераторы с более высокими показателями мощности.

Патронные нагреватели hotrod® изготавливаются по современной технологии с применением только высококачественных материалов, что позволяет обеспечить длительный срок службы и исключительные свойства данного вида изделий.

Железобетонные кольца, крышки и днища