Home supplies and appliances in bulk on Qoovee

Power 1200 W. Heating element type: infrared. 2 heating modes. Metal protective mesh. Heating area up to 25 sq.m. Overheat protection. Automatic shutdown when rollover. Does not burn oxygen and does not dry air. Voltage: 220-240 V, Frequency: 50/60 Hz

Volume: 2.0 l. Power: 2200 watts. Powered by 220-240 Volts. Frequency 50-60 Hz. Made of stainless steel. Concealed heating element. Automatic shutdown in the absence of water. Automatic shutdown when boiling. Base rotation 360 degrees. Indicator light. Color: green metallic.

Power 2400 W. Adjustable thermostat. Work indicator. Overheat protection. Ceramic heating element. 2 heating modes. Cold air function. Body rotation 90 *. Low noise level. Heating area up to 25 sq.m. Voltage: 220-240 V, Frequency: 50/60 Hz

Maximum diameter of cut trees: 480 mm. Engine type: single-cylinder air-cooled, two-stroke; Working volume: 53.2 cm³; Rated output power: 2.2 kW; Idle speed: 7500 rpm; Two-stroke oil / gasoline ratio: 1:25; Fuel tank capacity: 550 ml; Net weight 12.7 kg.

Dishwashing equipment

Gas meter "Prince-M" G40 measures the volume of consumed gas up to 65 m³ / h, at a temperature range from -40 to +60 ° С, is used as part of commercial gas metering units, in mobile boiler houses, apartment buildings for access and house gas metering ... The built-in thermocorrector, as well as telemetry of the development and production of the meter manufacturer, allows them to be installed in metering units where accurate readings of the reduced gas volume and remote data collection are required. All devices are guaranteed for 6 years. Maximum working pressure up to 5 kPa. The meter can be used to measure gas in centralized low pressure networks, as well as after the reduction gearbox of gas holders. The design of the device has small dimensions and weight up to 1.2 kg, there are no moving parts, additional maintenance of the gas meter is not required. Pre-installed nuts on DN 50 nozzles allow the meter to be mounted directly on the pipeline. Gaskets are included.

The high accuracy and small dimensions of the Prince-M G25 utility gas meter allows the device to be used as part of a commercial gas metering unit, in production and utilities. Each counter is equipped with a thermocorrector, it is possible to configure additional parameters. The meter operates at temperatures of the measured medium in the range from -40 to +60 ° С. Can be installed outdoors in unheated rooms, in harsh weather conditions. The design of the meter does not contain moving parts, which increases reliability, no additional maintenance is required. The meter is powered by a built-in battery designed for 10 years of operation. For the convenience of data retrieval, it is possible to organize a remote transmission system in various ways, integration with many gas suppliers.

Meters are installed in boiler rooms of production facilities, entrances of apartment buildings and at other facilities where a reliable accurate gas meter is required and space for installing additional equipment is limited. The operating temperature range is from -40 to +60 ° C, which guarantees accurate measurements even in the most severe conditions. The possibility of installation in unheated rooms and outdoors makes the gas meter unique in the utility segment, and the ready-to-use telemetry system allows you to control many meters by one operator. All devices are equipped with a temperature sensor located directly in the gas flow, which, according to the certified measurement procedure, makes it possible to bring the accumulated volume values to standard temperature conditions, it is possible to adjust the compressibility coefficient and set the pressure constant. The calibration interval and the manufacturer's warranty is 6 years, during which the company makes a replacement in case of a defect.

The dryer is available in three modifications 50 * 50 cm, 50 * 75 cm, 50 * 50 cm with a thermostat.

Dryer for shoes. Size 50 * 35 cm.

Teplomax is designed to increase the water temperature in an inflatable or frame pool. It is produced in three modifications, differing from each other in size and ability to warm water in pools of different sizes. Dimensions: 100 * 53cm, 150 * 53cm, 200 * 53cm

Color: RGB LED Brand: CREE/OSRAM/LUMILEDS/ Epistar/Mainland China series Beam Angle: ≥110° Source Life: 50,000H ELECTRICAL PARAMETERS Working Voltage: DC 24V Rated Power: Maximum 6W CONTROL PARAMETERS Control Method: DMX512/Serial Gray Scale: 8Bits/12Bits/16Bits Control System: EXC-ALL the lights control system STRUCTURAL PARAMETERS Shell Material: High-strength die-cast aluminum/PC lens Surface Color: Black Structure Size: 105x105x62.5mm Total Weight: 250g ENVIRONMENTAL PARAMETERS Working Temperature: -40°C to 50°C Storage Temperature: -40°C to 65°C Humidity Range: 0%-90% Protection Rating: IP66  

Improved one-piece pump. Withstands constant high pressure. Less noisy, easy to operate. Also has a remote control Indicator name GK011 Weight 8.5 kg Max. Slave. Pressure 750 Operating pressure 500 Performance 0.7

Reception robots, waiters robots, hostess robots, nanny robots, helper robots, etc. A new and completely undeveloped niche. Gaining momentum and you can become one of the first. We work exclusively on request. Write to mail or messengers + 7952-2204269

Features of explosion-proof pneumatic industrial vacuum cleaner Dastprom PP-EX / 60.2: Compressed air operation. No power connection required; A compressor is required for operation; Has a large stainless steel tank for collecting 60 liters of dirt and a sturdy metal frame; The vacuum cleaner is equipped with two noise suppression filters and a HEPA fine filter; The cleaning efficiency reaches 0.3% micron, 99.99%; Use of anti-static hose with long and short connecting valves eliminates sparking with explosion-proof function;Purpose: Cleaning of explosive dust and waste; Dry and wet cleaning; Cleaning of metal shavings, parts, as well as metal chips when cutting and polishing metal; Collection of chemical and toxic liquids and oils; Cleaning of plastic parts when processing plastics; Cleaning of textile waste from natural and synthetic raw materials: wool, cotton, linen, silk, artificial and synthetic fibers, synthetic threads; Fine dust removal, work with a grinding machine; Purification of carbon powder, oil, chemical powder, powder coating, white titanium powder, magnetic powder, etc;Wide application in various industries: military-industrial complex, pharmaceuticals, medicine, mechanical engineering, metalworking, woodworking, food processing, textiles, shipbuilding, metallurgy, painting workshop, construction, oil refineries, chemical and other industries. The standard delivery set includes: Vacuum cleaner - 1 pc. Hose (high quality fully antistatic hose; inner diameter 38 mm, outer diameter 42 mm, length 2.5 m) - 1 pc; Steel pipe-rod (antistatic design, composite; length 1 m) - 1 piece; Double HEPA filter - 1 piece; Noise reduction filter - 2 pcs; Replacement nozzles: sex nozzle with bristles, sex nozzle with rubber inserts, crevice nozzle, round nozzle with bristles. Characteristics Country of Origin China Guarantee 12 months for a vacuum cleaner Waste collection tank 60 l Air flow at the inlet to the vacuum cleaner 280 m³ / hour Air purification efficiency 99.9%, 0.3 μm Working hours continuous, round the clock Housing stainless steel Length 650 mm Width 600 mm Height 1120 mm Weight 43 kg Package weight 48 kg Packaged length 745 mm Packing Width 635 mm Height in packing 1150 mm Noise level not more than 53 dB Filter material area 22680 cm² IP protection class IP66 Power cable length 8 m Maximum suction power 230 Mbar

Our smallest industrial vacuum cleaner with a 15 liter tank. Features of the Dastprom PP-220 / 15.1-1.5 model: The vacuum cleaner is equipped with two successive cyclones. This allows it to "store" any dirt in the tank and extend the life of the filters. Replaceable bags and other consumables are not required during operation; The electric power of the turbine is 1500 W. Its suction power is sufficient for using the vacuum cleaner when cleaning any non-explosive dirt and any non-flammable liquids; The vacuum cleaner is equipped with a soft start system; The vacuum cleaner has a socket for connecting a power tool with a power consumption of 50 to 2000 W; The vacuum cleaner can be used for blowing off. For this, the hose is connected to the working air outlet; Supplied with a set of 2 pieces of washable, reusable ultrafine HEPA filters with a filtration area of more than 1.7 m²; Dimensions and weight make it easy to transport in any car; For ease of transportation, the vacuum cleaner is equipped with a removable platform with non-marking wheels. The standard delivery set includes: A vacuum cleaner; Vacuum cleaner nozzle 360 mm; Water collecting rubber for 360 mm nozzle, set (2 pcs); Universal slotted vacuum cleaner nozzle; Round lint for vacuum cleaner; Vacuum cleaner bar ; Vacuum cleaner hose (standard, 3 m); Filtering elements ( a set of ultrafine filters and a turbine cooling filter ). Characteristics Country of Origin Russia Guarantee 12 months for a vacuum cleaner, 6 months for a turbine Electric power 1.5 kW Waste collection tank 15 l Power supply voltage 220 V Air flow at the inlet to the vacuum cleaner 208.2 m³ / hour | 57.8 l / s Maximum vacuum up to 32 kPa Air purification efficiency 99.9% Number of filters 2 Housing steel Coating polymer, powder coating Length 442 mm Width 442 mm Height 866 mm Weight 21.8 kg Diameter of the body (cyclone) 345 mm Package weight 26.8 kg Package volume 0.19 m³ Packaged length 450 mm Packing Width 450 mm Height in packing 885 mm Noise level no more than 65 dB IP protection class IP32 Power cable length 5 m Mean time to failure of turbines (replacement of brushes) not less than 500 hours Operating temperature range -50 ° C to +55 ° C Maximum suction power 550 aerowatt

& nbsp; factory direct

Yiwu Jinhao Trading Co., LTD. We are cooperating & nbsp; with both large companies and small organizations, as well as individuals. All our clients are satisfied with the quality of services and cooperate with us on an ongoing basis.

Panel heating to 120 ° C, which allows you to heat the entire height of the room and heat the floor in the area under the panel. HSteel infrared electric heating with metal heaters is a system that saves up to 60% energy compared to alternative heating systems. Steel panels combine infrared heat with optimal spectral characteristics, which creates exceptional thermal comfort and the ability to be placed on the ceiling. Thanks to these two features, a high-quality thermal heating is created in the room: evenly walls and objects in the room. The high efficiency of HSteel panels is due to the special design and properties of the heating element, the large heat transfer area, as well as the process stabilization rate, which is a criterion for evaluating the effectiveness. Thanks to the original arrangement of the heating element on the entire surface of the HSteel panel, the fastest stabilization of the process is achieved. One HSteel ceiling panel (0.40 kW) can heat up to 4 m². Thanks to the use of temperature controllers, the system works only 5-7 hours a day. Compared to alternative heating systems, HSteel will be about 3 times more economical. Installation of panels is very simple and can be performed as soon as possible. HSteel ceiling heaters are an excellent solution both for local heating and for heating the entire room. Also, due to the design features, the panels can be placed in suspended ceilings of the Armstrong type.

The stylish design of HSteel panels will fit into any interior. The lineup is different in size and is made in classic white color. Stand-alone infrared electric heating with HSteel metal heaters is a system that saves up to 60% of energy compared to alternative heating systems. The high efficiency of HSteel panels is due to the special design and properties of the heating element, the large heat transfer area, as well as the rate of stabilization of the process. This is a measure of effectiveness. Thanks to the original arrangement of the heating element on the entire surface of the HSteel panel, the fastest heating is achieved. One 0.45 kW HSteel is capable of heating up to 10 m². Thanks to the use of temperature controllers, the system works only 5-7 hours a day. Compared to alternative heating systems, HSteel will be about 3 times more economical.

High performance and stylish design. The front side of the heaters of the HGlass series is made of tempered glass, and the back is made of high-quality stainless steel. The heater is highly efficient due to the special design and properties of the heating element. The heating element is made of material with high heat dissipation at low power consumption. Even after disconnecting from the power supply, the heating panel continues to produce heat for more than half an hour. We managed to achieve the maximum cooling time for the panel. This helps reduce energy costs. The stylish design of the panels will fit into any interior. The model range differs both in size (see. Technical specifications) and in color (white, black, mirror). Personalization There is the possibility of applying photo printing to any desired image. In the "Image Catalog of infrared glass-ceramic heaters and towel dryers" you can choose your favorite image or offer your own. In addition, you can apply a sandblasting pattern to the device and order a custom size. All heaters can be placed both vertically and horizontally.

Electric crepe maker! Easy to use and most importantly spend less time and no burns! Help for those who have all the pancakes lumpy

Floor standing water dispenser Aqua Work 0.7 LKR is a device without cooling system, there is only the heating function to 90-96 degrees and ambient temperature water. It's a good replacement for a manual pumps and electical kettle.   Miniature dimensions, neat appearance, in the lower part of the body there's a built-in 10 liter cabinet with translucent door.   Aqua Work 0.7 LKR body's height is 855 mm, that is below than traditional floor standing coolers dimensions, those are about 1 meter. Specifications: Heating power  -------700 W Hot water temperature –- ≥ 90°C Heats up  ---------------- to 7 l/h Dimensions ----------- 300х290х855 mm Built-in 10 liters cabinet

Floor standing water dispenser Aqua Work 0.7 LWR for dispensing and bottling ambient temperature water from a bottle mounted on the top.  Inside the miniature (case 855 mm case height) there is neither a heating tank nor a cooling system, nothing, only two tubes from the distribution tank to the taps and a small cabinet (not a refrigirator). Such water dispensers are often installed in school and kindergartens, it turns out to be more expensive, but also more convenient analogue to a manual pump. Specifications:   Water dispenser gives room temperature water from both of the taps Dimensions -------- 300х290х855

Desktop cooler (dispenser) for water, model Aqua Work 105 LR with heating and compressor cooling system. Heating power 700 W, able to provide up to 7 liters of hot water for an hour Full compressor cooling - at least 2 liters per hour of truly cold water Conveniently extended downward taps of faucets of the type "push with a mug" Button for forced heating - for those who need boiling water Desktop model (case height - 475 mm) LED indication Steel side surfaces are designed for mounting cup holders on a magnet Specifications: Heating power ------- 700 W Hot water temperature –- ≥ 90 ° C Heats up ---------------- up to 7 l / h Dimensions ----------- 310x340x475 Cold water temperature - 7-10 ° C Cooling Power --------- 90 W Cools ------------------ up to 2 l / h Available color range: black and white; white; silver black. Attention! The price is for a standard color device (white and black). The price of devices of other colors may be cheating (check with the seller).

Table standing water cooler Aqua Work 105 LDR with heating and electronic cooling system. Heating power 700 W, the device is able to provide up to 7 liters of hot water per hour. indicators standart for electronic cooling - up to 1 liter of cold water per 1 hour. Conveniently extended downward taps of "push with a cup" type. The button for forced heating, for people who needs boiling water. Full-size model (case height 950 mm). Full-size model (case height 950 mm). Built-in 9.5 liter cabinet (28 x 20 x 17 cm). LED indication Steel size surfaces are designed for mounting cup holder with a magnet.Specifications: Heating power  -------700 W Hot water temperature  –- ≥ 90°C  Heats up ---------------- up 7 l/h  Dimensions ----------- 310х340х950 mm Сold water temperature - 12-15 °C Cooling power ---------70 W Cools down ------------------to 1 l/hAvalable colour range: black and white; white; silver and black.Attention! The represented price is for standard model (white and black). The price of devices of other colours may be changed (ask the seller).  

Table standing water dispenser Aqua Work 105 LKR with heating function and ambient water temperature.  Table standing model (case height - 475 mm).  2 taps of "press pedals" type with oversized pedals 1 tap of ambient temperature water, 2 tap of hot water The steel surfaces on the sides of Aqua Work 105-LWR allow to connect cup holder on magnets or screws to the device.  Specifications: Heating power  -------700 W Hot water temperature  –- ≥ 90°C  Heats up ---------------- up 7 l/h Ambient temperature water or hot water Dimensions - 310х340х475 mmAvalable colour range: black and white; white; silver and black. Attention! The represented price is for standard model (white and black). The price of devices of other colours may be changed (ask the seller).

Table standing water dispenser Aqua Work 105-TWR is the device without heating and cooling functions. Only the ambient water temperature function from a bottle mounted on the top is implemented.  Case height - 475 mm.  2 taps of "press pedals" type with oversized pedals Ambient water temperature from both of the taps The steel surfaces on the sides of Aqua Work 105-TWR allow to connect cup holder on magnets or screws to the device.  Specifications: Built-in 9.5 liter cabinet Ambient water temperature Dimensions - 310х340х475 mmAvalable colour range: black and white; white; silver and black. Attention! The represented price is for standard model (white and black). The price of devices of other colours may be changed (ask the seller).

Floor standing water dispenser Aqua Work 105 LKR with heating function and ambient water temperature.  Full-size model (case height - 950 mm).  2 taps of "press pedals" type with oversized pedals Small built-in 9.5 liter cabinet. The steel surfaces on the sides of Aqua Work 105-LWR allow to connect cup holder on magnets or screws to the device.  Specifications: Heating power  -------700 W Hot water temperature  –- ≥ 90°C  Heats up ---------------- up 7 l/h Built-in 9.5 liter cabinet Ambient water temperature Dimensions - 310х340х950 mmAvalable colour range: black and white; white; silver and black. Attention! The represented price is for standard model (white and black). The price of devices of other colours may be changed (ask the seller).

Floor standing water dispenser Aqua Work 105-LWR is the device without heating and cooling functions. Only the ambient water temperature function from a bottle mounted on the top is implemented.  Full-size model (case height - 950 mm).  2 taps of "press pedals" type with oversized pedals Small built-in 9.5 liter cabinet. The steel surfaces on the sides of Aqua Work 105-LWR allow to connect cup holder on magnets or screws to the device.  Specifications: Built-in 9.5 liter cabinet Ambient water temperature Dimensions - 310х340х950 mmAvalable colour range: black and white; white; silver and black. Attention! The represented price is for standard model (white and black). The price of devices of other colours may be changed (ask the seller).

Floor standing water cooler Aqua Work 105 LDR with heating, compressor cooling system and a 9.5 liter cabinet. Heating power 700 W, the device is able to provide up to 7 liters of hot water per hour. Reliable compressor cooling - at least 2 liters of cold water per hour Conveniently extended downward taps of "push with a cup" type. The button for forced heating, for people who needs boiling water. Full-size model (case height 950 mm). Full-size model (case height 950 mm). Built-in 9.5 liter cabinet (28 x 20 x 17 cm). LED indication Steel size surfaces are designed for mounting cup holder with a magnet.Specifications: Heating power  -------700 W Hot water temperature  –- ≥ 90°C  Heats up ---------------- up 7 l/h  Dimensions ----------- 310х340х950 mm Cold water temperature - 7-10 °C Cooling power ---------90 W Cools down ------------------to 2 l/hAvalable colour range: black and white; white; silver and black. Attention! The represented price is for standard model (white and black). The price of devices of other colours may be changed (ask the seller).

Floor standing water cooler Aqua Work 105 LDR with heating, electronic cooling system and a 9.5 liter cabinet. Heating power 700 W, the device is able to provide up to 7 liters of hot water per hour. indicators standart for electronic cooling - up to 1 liter of cold water per 1 hour. Conveniently extended downward taps of "push with a cup" type. The button for forced heating, for people who needs boiling water. Full-size model (case height 950 mm). Full-size model (case height 950 mm). Built-in 9.5 liter cabinet (28 x 20 x 17 cm). LED indication Steel size surfaces are designed for mounting cup holder with a magnet.Specifications: Heating power  -------700 W Hot water temperature  –- ≥ 90°C  Heats up ---------------- up 7 l/h  Dimensions ----------- 310х340х950 mm Сold water temperature - 12-15 °C Cooling power ---------70 W Cools down ------------------to 1 l/hAvalable colour range: black and white; white; silver and black.Attention! The represented price is for standard model (white and black). The price of devices of other colours may be changed (ask the seller).  

Surge protectors, extension cords, splitters, tees-from 115r Cables patch cord 3m - from 18r Adapters and adapters - from 13p Szu for laptops universal-from 560r HDMI cables from 47p VGA / SVGA / DVI-cables from 38p Cables for the printer - from 30r USB extension cables from 32p Cables tulips - from 22r Power Cables - from 20p

EXW from 26,22 Euros Please, send you requirement to  

BURO mouse pad with pattern Non-slip base allows you to tightly fix the mat on the table surface. Dense and smooth material gives good resistance to mechanical stress, provides clear beam positioning of optical and most types of laser mice. Great for office and home use. An armpit with a bright and stylish design will be an interesting accessory for decorating your desktop. It is convenient not only for permanent placement in one place, but also for carrying in a bag, easy to clean. You can buy a mouse pad at a bargain price in the Media55 online store and Klik55 retail stores. Characteristics: Manufacturer: BURO. Compatibility: Laser and optical mice. Coating: PVC. Base: Sponge rubber. Color: Pattern / Venice. Dimensions: 230 x 180 x 2mm.

Wired mouse Red Line Lite ML-35 Red Line Lite is a wired mouse with a compact and ergonomic design. It is equipped with an optical sensor with a resolution of 1600 dpi and is distinguished by the clarity of work on any surface. The symmetrical shape makes it possible to control the mouse with any hand. Before starting work, it is enough to connect the manipulator to the USB port of the computer without installing drivers. The compact and lightweight model fits comfortably even on a small desktop and allows you to work with it for a long time without fatigue. The classic design is suitable for any interior. And the low price will be especially pleasant for those who need to buy several mice at once. Characteristics: Manufacturer: Red Line Name: Wired Mouse Management: 2 buttons + button wheel Sensor Type: Optical Resolution: 1600 dpi OS Compatibility: Windows XP / Vista / 7, Mac OS Interface: USB Cable length: 1.2m Case Material: Plastic