Vehicles & parts in bulk on Qoovee

It is intended for obtaining solder rods by the method of continuous pulling upward of casting billets from copper melt and cutting them into dimensional cuttings. Consists of: pulling stand of two-roll type, operating in step-by-step mode from one drive with the possibility of individual pressing of each workpiece at two points; molds mounting brackets; carts for manually moving metal receivers; devices for cutting bars into measured lengths; common installation frame; machine control system, including cabinet and control panel. Smelting furnaces are not included in the scope of delivery.

Designed for punching grooves and holes, punching perforation corners in metal sheets. It is possible to use combined dies for simultaneous punching of grooves and holes. Can be completed with a feeder, table, roller conveyor. To operate the presses, a compressed air line under a pressure of 0.7 MPa is required. Control from a pedal or according to a technical assignment from two buttons simultaneously. The presses can work autonomously or as part of a line.

Designed for simultaneous punching of 4-corner segments in the shelves of a U-shaped profile, punching a tongue and punching holes for further connection of the ends of the profile into a frame. They consist of: a rigid frame on which the press blocks with stamps are mounted, an additional movement mechanism, a device for removing cut profiles, hydraulic equipment, which includes a hydraulic station, an electrical cabinet with a control panel. The blank of the U-shaped profile is installed manually on the dies and positioned along the stops. After performing all operations, the profile is automatically removed from the installation.

Designed for firing ceramics and other materials. They consist of a bed, a casing, a heating chamber, lining with refractory and heat-insulating materials, an electrical cabinet. Control from a stand-alone console. Heating of the furnace is electric. The heating chamber has three heaters: two heaters at the sides and one heater at the bottom of the furnace. Coil heaters are attached to ceramic tubes. Heater material - fechral Ø 4 mm.

Designed for firing ceramics and other materials. It consists of a bed, a casing, a heating chamber, lining with refractory and heat-insulating materials, an electrical cabinet. Control from a separate control panel equipped with a microprocessor-based temperature control system in the furnace. At the request of the Customer, the furnace can be equipped with an electromechanical drive for the bogie hearth.

Designed for firing powder materials. They consist of a lined heating chamber, inside of which a pipe, heated by silite heaters, rotates, a loading device and a control panel. The pipe is supported by four support rollers and a chain drive. The loading device is installed on support wheels with which it can be rolled away from the furnace in case of repair. The inclination of the furnace towards the unloading side can be changed within the range from 0 to 3 ° C. The work is controlled from the console. The gases formed during the firing of powders are sucked off through a branch pipe connected to the shop ventilation system.

Designed for drying bulk materials in various industries: chemical, construction, paint and varnish, powder metallurgy, etc. Hot air supplied to the drying zone from a heat generator is used as a heat carrier. Evaporation products are removed through an air duct, which is connected to the workshop exhaust ventilation through a branch pipe. The characteristics of the drying drum can be changed for the technological tasks of the Customer's production. On request it is completed with a heat generator of any type. Electric or gas, rated thermal power of gas heat generators from 0.315 MW. The installation includes: frame, drum, support station, drive station, loading bunker, unloading bunker.

Designed for mixing and granulating powder materials. Consists of • an inclined rotating mixing chamber; • high-speed granulating head; • nozzles for binder injection; • scraper tool for dumping the mixture from the wall and bottom of the chamber, preventing sticking; • pneumatic cylinder for opening the bottom unloading valve; control systems. The rotation speed of the mixing chamber and granulating head is regulated by a frequency converter, the time of the mixing, granulating and unloading process is set by a timer for each operation. Loading is carried out manually through the fitting with the chamber closed. Unloading through the bottom hatch. Units and parts in contact with the processed product are made of stainless steel. Various versions are possible both in size and in materials used.

The filling and packaging machine is designed for filling and packaging liquid dairy and other products in containers made of polymeric materials. The packaging is closed with foil lids with a heat-sealable layer. The machine is equipped with a dating mechanism. Technical characteristics Brand LLC "Cooperative Nadia" Country of origin Ukraine Productivity 1500 pcs / h Productivity, pack./min 20-30 Dosing volume Dose value, ml 50-250 Dosing accuracy,% 2 Power consumption, kW 1 Electric power supply from the alternating current network (1ph): voltage, V 220 Frequency, Hz 50 Required consumption of compressed air (at a pressure of 6-8 bar), l / min 120 Dimensions, mm 770x710x1850 Weight, kg. 220

The linear type labeling machine is designed for sticking a circular paper label on the cylindrical part of metal cans filled with product. The machine is equipped with two automatic label feeding mechanisms. Principle of Operation A continuous stream of cans flows through an inclined chute to a distance roller that divides the stream. Further movement of the separately moving cans is carried out by a V-belt. The rollers of the glue bath are applied to the cylindrical surface of the can with hot melt glue in the form of small marks. With their help, the bank selects a label from the store, with cold glue already applied to its end, and wraps it over itself. Smoothing the glued paper is performed by a special pillow. Cold glue pumps a pump, which periodically drives the can itself through a lever-ratchet mechanism. The price of a labeling machine for bottles is determined by the number of standard sizes of cans used. Technical characteristics Brand "Cooperative Nadia" LLC Country of origin Ukraine Productivity 12000-14000 pcs / h Warranty period 12 months Overall dimensions 2020х700х1500 mm Height of a can 26-130mm Weight 361 kg Diameter of a can 50-100mm Bank container Installed power 2.55 kW Container height 26-130mm

The labeling machine for bottles, cans and PET containers is designed for gluing paper circular and front labels on the cylindrical surface of metal, plastic or glass containers. The design of the machine allows both conventional and circular labels to be glued by applying a thin layer of glue to the label itself. The machine is manufactured in stainless steel. An additional option is a glue heating unit, which is important at low temperatures in the production area. The principle of operation The container, moving along the conveyor, is placed by the auger with a certain step. When the container passes the sensor, the label magazine drive is switched on. The magazine is rolled on a glue roller, as a result of which the label is removed from the magazine and, using a stripper, is transferred from the roller to the container. Further, with the help of polyurethane belts of the rolling conveyor and a foam cushion, it is glued and smoothed. The price for labeling equipment is determined by the size of the container and the number of its standard sizes. Specifications: Brand: LLC Cooperative Nadia Country of origin: Ukraine Productivity: 3000-6000 pcs / h Container: Bottle, Bottle, Jar Label height: 30-180mm Container diameter: up to 180mm Overall dimensions: 2500х900х1320 mm Warranty period: 12 months Material of used labels: Paper Capacity regulation: stepless Weight: 436kg Label length: 60-380mm Installed power: 1.1 kW

We offer Injection molding machine of the PD-208-KX series! Profitable! Specifications: • Model: PD-208 • Injection weight, gr: 531 • Injection volume, cm3: 577 • Form stroke, mm: 470 • Distance between columns, mm: 510 * 510 Parameters of the received products (boxes): • Dimensions, mm: 400 * 300 * 110 • Weight, kg: 0.205 • Execution: perforated • Material: polypropylene The price is indicated taking into account delivery to the Russian Federation, at the rate of $ 1 = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you

We offer a pallet production line! Profitable! This line uses waste wood, bamboo, shavings and furniture factory waste. The product is obtained through crushing, drying and the addition of glue, then all this is hot pressed. Features: • High temperature, high pressure, pallet pressing done in one go, standard size, no metallic material. • Pallets can be used in export packaging • Reasonable structure design, high performance. • According to European standard, biodegradability. • Waterproof, insect and termite resistant. • High strength, no deformation and can be reused. • Can be split from four directions, easy to use. • Storing on top of each other, economical, easy to transport. • Light weight, beautiful shape. The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!

We offer a gas reducer! Profitable! Used for a gas generator, walk-behind tractor or motor pump. It is stationary, the operator decides what type of fuel to use: gasoline, main gas (methane), propane or eco-gas. To switch the gas generator, walk-behind tractor or motor pump to the selected type of fuel, just turn the lever. The biggest advantage of the gearbox is the economy. Gas is much cheaper than gasoline, which allows reducing fuel costs by up to 50% - if it is propane and up to 90% - if it is methane, when using biogas - up to 100%. Another important advantage of a gearbox for a gas generator, walk-behind tractor or motor pump is environmental friendliness. Price: 1970 rubles - reducer 290 rubles - repair kit The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!

We offer an automatic contactless car wash complex! Profitable! The most modern, efficient and economical car wash complex. The only manufacturer that provides a 3-year warranty. The structure of the sink includes support racks, guide rails, head washer, built-in automatic drying system, decorative lighting, payment terminal, pump station, control cabinet, a set of sensors and connecting pipes. Specifications: • Installation length: 7600 mm • Mounting width: 3600 mm • Mounting height: 3350 mm • Dimensions of the pumping station: 1250 * 700 * 600 mm • Unit power: 380V / 22 kW, 50/60 Hz • Maximum current: 80A • Total power: 22 kW • Power of the pumping station: 18.5 kW / 15 kW • Power of drying fans: 20.5 kW (11000 Pa, 23000 m3 / h • Controller: Industrial controller • Water consumption: 65 l / car (express wash), 100 l / car (standard wash) • Shampoo consumption: 10-40 ml / machine • Wax consumption: 18.5 l for 1000 cars • Power consumption: 0.52 kW * h / machine (express wash), 0.99 kW * h / machine (standard wash) The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!

We offer a vegetable washing machine! Profitable! The DMG U-shape polishing machine is designed for the finishing preparation of fruits and vegetables. During the polishing of the product, all contamination is removed from its "pits". After polishing, the clean product is sent to the bulkhead and dried. The additional DMG polish can be equipped with a water recirculation system. Those. characteristics: • Model: DMG 1500 • Number of rolls: 9 • Productivity: 800 - 1000 kg / h • Material: stainless steel • Dimensions: 2300 * 900 * 1050 • Motor power: 2.2 kW • Power supply: 380 V The price is indicated taking into account delivery to the Russian Federation, at the rate of $ 1 = 67.01. We will send a commercial offer upon request. We work directly with the manufacturing plant without intermediaries, without extra charges. For all questions, write and call - we will be glad to cooperate with you!

We present to your attention the equipment necessary for the processing of agricultural animal waste - Manure Separator-220! This separator left in October 2018 for Kyrgyzstan, Bishkek, which means that we can easily make delivery not only across the Russian Federation, but also to the CIS countries. Separator benefits: - The separator auger has high quality 304 stainless steel blades. - high level of dehydration - easy operation (just press one button to start and stop work) - low power consumption - suitable for continuous work. - the dehydrated mass at the exit is practically odorless. Later it can be used as a basis for fertilizers. Specification: Country of origin China Model 220 Uptime 20 hours Engine power 7.5 kW Maximum moisture content before processing 90% Moisture content in solid after processing 35-55% Chicken manure productivity 5-7 m3 / h Overall dimensions, 2000x800x1700 Weight 680 kg Price including delivery to the Russian Federation, excluding VAT, at the rate of $ 1 = 67.18. We will send a commercial offer upon request. We work directly with the manufacturing plant without intermediaries, without extra charges. For all questions, write and call - we will be glad to cooperate with you!

COMFORTABLE FUR COATS - SEASON'S TREND ⠀ Sale of fur wraps throughout the Russian Federation. Deliveries directly to the factory. Lowest price and best quality in Russia. High seasonal demand. Delivery from 2 days. Retail at a 110% mark-up. they fade and do not slip on the seat. When buying wraps, we prepare and provide a personalized customized landing page with a high CTR absolutely free. Prices: From 20 to 60 pcs. - 650 rub. From 61 to 90 pcs. - 600 rubles. From 91 to 130 pcs. - 550 rub.