Diagnostics, repair, programming of industrial controllers We will repair controllers DEIF, COMAP, DSE, DATAKOM and others. We carry out repairs as soon as possible! Diagnostics of equipment and determination of the cause of failure of the control unit. Alternator control unit firmware: replacement or software update. Replacement of previous generation controllers with new ones, programming for your generator, power plant and needs. Controller repair, replacement of individual elements. Installation of the controller into the generator and commissioning.

Overhaul of diesel generator automation: - diagnostics and replacement of the diesel generator controller with their calibration; - production of a control cabinet based on analog devices or based on controllers, with various degrees of automation. It is possible to manufacture an analogue of old discontinued remotes. Overhaul and installation of an electronic speed controller at the Customer's diesel power plant - selection and installation of the Actuator on the Customer's injection pump with the manufacture of mounting plates, setting up the Speed ​​Control Unit and installing an induction speed sensor on the flywheel.

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!

We offer & nbsp; repair electronic faulty equipment. Component repair of industrial electronics & mdash; this is a way to ensure the constant operability of the equipment and free up additional funds for the modernization of production! & nbsp;

Diagnostics of failures, repair of industrial electronics Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.

Diagnostics of failures, repair of industrial electronics Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.

Diagnostics of failures, repair of industrial electronics. Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.

Diagnostics of failures, repair of industrial electronics. Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.

We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production! Maintenance and diagnostics of frequency converters 1. Individual drive: Visual inspection and "pulling" the terminals. Purge the frequency converter. Revision of power conductors. Revision of the cooling systems of the inverter (stability of the fan, etc.). Checking the error log. Maintenance of reporting documentation on the work done. 2. Cabinet-type drives: Check cooling. Checking the inlet temperature. Checking the flow. Compliance with specification. Revision of cooling systems for electronic boards. Filter replacement / cleaning. Checking and "pulling" the input / output power contacts and terminals. Fan check. Checking connections and contacts. Warranty repair Warranty repair

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Three-plunger pumps of the PT and T type are used in industries requiring high pressures, including explosion and fire hazardous ones. Areas of use: ·                  oil production: drilling and well workover, circumferential waterflooding, enhanced oil recovery, oil dewaxing and well equipment. ·                  chemical and petrochemical industry: production of ammonia, urea, melamine, acetic, nitric and other acids, supply of reagents under high pressure; ·                  mechanical engineering: hydraulic cutting, hydroforming, power equipment for hydraulic presses. ·                  power engineering: feed pumps for boiler plants, steam generators. ·                  food industry: reverse osmosis plants, homogenizers. ·                  utilities: repair and pressure testing of pipelines and hydraulic systems, flushing of the sewage system. On the basis of pumping units, UN, UPG units are manufactured, which are designed for hydrotreating sewage and other pipelines with a diameter of 80 mm to 600 mm, as well as external and internal surfaces of various technological equipment, mechanisms, buildings, structures and other objects. Specifications: Supply - 1.25-3.2 m3 / hour; Pressure at the outlet of the pump-10 MPa Execution D1 Weight-355 kg Check the cost with the manager! Manufacturer's warranty - 1 year!

Three-plunger crank pumps PT and T are intended for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Three-plunger pumps of the PT and T type are used in industries requiring high pressures, including explosion and fire hazardous ones. Areas of use: ·                  oil production: drilling and workover of wells, circumferential waterflooding, enhanced oil recovery, oil dewaxing and well equipment. ·                  chemical and petrochemical industry: production of ammonia, carbamide, melamine, acetic, nitric and other acids, supply of reagents under high pressure; ·                  mechanical engineering: hydraulic cutting, hydroforming, power equipment for hydraulic presses. ·                  power engineering: feed pumps for boiler installations of steam generators. ·                  food industry: reverse osmosis plants, homogenizers. ·                  utilities: repair and pressure testing of pipelines and hydraulic systems, flushing of the sewage system. On the basis of pumping units, UN, UPG units are manufactured, which are designed for hydrotreating sewage and other pipelines with a diameter of 80 mm to 600 mm, as well as external and internal surfaces of various technological equipment, mechanisms, buildings, structures and other objects. Specifications: feed - 6.3 m3 / hour; Pump outlet pressure - 6.3 MPa Version D1 A1 - V-belt transmission Order pumping equipment from the Manufacturer with a 1 year quality guarantee!

UPS of the Element series, with built-in batteries 4x9Ah / 12V. Charge current up to 1.4 A. Power 1800W / 2000 VA The Element Series SNR Uninterruptible Power Supply protects sensitive electrical equipment from the most common power problems, including power failures, sags, surges, line noise, high voltage spikes, frequency fluctuations, and harmonic distortion. Power outages can occur at unpredictable times, and power quality can also change over time. Power problems are dangerous for IT equipment and can result in critical data corruption, loss of unsaved work sessions, and equipment failure - all of which can result in hours of downtime and costly repairs. These UPSs are ideal for protecting servers, telecommunications, networking and industrial equipment. Features: double voltage conversion technology provides complete equipment protection and sinusoidal output voltage in all operating modes, as well as zero switching time to the battery; output power factor 0.9; The UPS can work together with generators; Intelligent three-stage charging is used to extend battery life; supports ECO mode; cold start function; standard communication interfaces: one RS-232 communication port, one USB communication port, and an internal slot for installing an SNMP card or dry contacts; Outlet Outlet Segment Management that allows non-critical loads to be disconnected in battery mode to extend the runtime of critical loads; the ability to increase the battery life by using up to four additional external battery packs; for UPS models with built-in batteries, hot-swappable batteries are available; function of emergency shutdown through the port of remote emergency power-off (EPO - Emergency Power-off); all important information is displayed on the device screen: load power and battery status are displayed in dynamic images. It is very easy to monitor the operation of the UPS, when the UPS fails, the display shows an error code, and the equipment can be restored in the shortest possible time using the table of fault codes; The LCD display can change the orientation of the image in accordance with the type of installation of the case: vertically or horizontally; the height of all UPS models of the Element series is only 2U. Contents of delivery UPS user manual CD with software SNMP DL801 for UPS USB cable power cable (input and output) RS232 cable brackets, rack mount for installation in a rack of uninterruptible power supplies SNR, we offer you the universal SNR-UPS-RK slide. (Sold separately) The UPS data monitors the correspondence of the incoming phase and neutral, therefore, in the event of a discrepancy, they signal this with an audible signal once every two minutes. Turn the plug in the socket Oscillograms of electrical signals at the input and output of the UPS (yellow - at the input to the UPS, blue at the output of the UPS) UPS model SNR-UPS-ONRM-2000-S48 Power 2000 VA / 1800W Input parameters Phase Single-phase with ground Rated voltage 230VAC * Input voltage range 160-290 VAC Frequency range 46 - 54 Hz or 56 - 64 Hz (auto-sensing) Input Power Factor ≥0.98 Range in ECO mode 200VAC-240VAC U min disable ECO mode - 200 VAC / U min disable ECO mode - 204 VAC U max of ECO mode deactivation - 240 VAC / U max of ECO mode activation - 236 VAC Bypass voltage range 186VAC-252VAC U min bypass shutdown - 185 VAC / U min bypass shutdown - 195 VAC U max switching off Bypass mode - 252 VAC / U max switching on ECO mode - 246 VAC Rated current 8.7 A Input connection IEC320 C20-16A Output parameters Phase Single-phase with ground Rated voltage 220 VAC ± 2% (208, 230, 240 VAC optional) Frequency 50/60 Hz ± 1 Hz Output power factor 0.9 Crest Factor 3: 1 Harmonic distortion (line load) ≤3% Harmonic distortion (non-linear load) ≤5% Output sockets (IEC C13-10A) × 6 Efficiency (efficiency) in mains operation ≥ 87% at full load Efficiency (efficiency) in ECO mode ≥ 94% at full load Switching time (Utility ← → Battery) 0 ms Switching time (Utility ← → Bypass) ＜ 4ms Battery parameters Battery voltage 48 Battery type 12V / 9Ah 4 pcs. consistently Back-up time at 50% load 11 minutes Battery charge current 1.4 A Charge voltage 54.8 Vdc ± 1% Charging time 8 hours up to 90% Battery protection Overcharge, overvoltage, short circuit protection UPS Features Overload capacity in mains mode 150% ± 5% <load ≤200% ± 5% after 300ms transfer to bypass and alarm 150% ± 5% <load ≤200% ± 5% after 300ms transfer to bypass and alarm Overload capacity in battery mode 108% ± 5% <load ≤150% ± 5% after 30s transition to emergency mode alarm 150% ± 5% <load ≤200% ± 5% after 300ms transition to emergency mode alarm Overload capacity in Bypass mode 130% ± 5% <load ≤150% ± 5% after 2 min transition to emergency mode alarm 150% ± 5% <load ≤200% ± 5% after 15s transition to emergency mode alarm Interfaces USB, RS-232, Internal SNMP card slot or dry contacts Environmental conditions and physical parameters Operating temperature 0 ° C - 40 ° C (recommended 15 - 25 ° C) Storage temperature -20 ° C - + 40 ° C Transport temperature -25 ° C - + 55 ° C Relative humidity 0 - 90% (non-condensing) UPS dimensions (WxDxH) 440mm × 552mm × 86.5mm Weight, kg 26.3 Noise level <55 dB Heat dissipation when operating from the mains, BTU / hour 346 Protection class IP20 IP20