Electrical equipment and parts in bulk on Qoovee
- Alternative energy sources
- Batteries
- Lighting equipment
- Wires, Cables, Cable Assemblies
- Electronic components and capacitors
- Generators
- Industrial Rechargeable Batteries
- Terminals & Connectors
- LED Displays
- Power Supplies
- Low-voltage electrical equipment
- Relay
- Fuse
- Stabilizers
- Plugs & Sockets
- Transformers
- LED lamps
- Telecommunications
Sort by:
Specify the price
Industrial machine computer repair, Touch screen repair, Machine monitor repair, Machine control system repair, Screen repair, Touch screen repair, Touch screen repair, Touch screen repair, Touchscreen repair, Touch screen repair, Touch glass repair, graphic panel repair operator, repair of the operator's text panel, Repair of the operator panel illumination, Conclusion of an agreement Provision of a guarantee for the repair of an electronic device for 6 months. The cost of repairs ranges from 30% to 50% of the cost of new equipment.
Specify the price
We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!
Specify the price
We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!
Specify the price
We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!
Specify the price
We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!
Specify the price
We offer to repair electronic faulty equipment. Component repair of industrial electronics is a way to ensure the constant operability of equipment and free up additional funds for the modernization of production!
Specify the price
Diagnostics of failures, repair of industrial electronics Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.
Specify the price
Diagnostics of failures, repair of industrial electronics Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.
Specify the price
Diagnostics of failures, repair of industrial electronics. Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.
Specify the price
Diagnostics of failures, repair of industrial electronics. Diagnostics of controller errors. Any errors and problems associated with the incorrect operation of industrial controllers and operator panels arise, oddly enough, either with completely old equipment or not working for a long time (the internal power battery has run out), or with a power failure and interruption of the algorithm cycle. Repair of modules, control units, controllers (PL.C) Repair of operator control panels (HMI), industrial monitors. Industrial computer repair (IPC). Repair of voltage stabilizers. Repair of industrial UPS (UPS - Uninterruptible Power Supply). Repair of industrial blowers. Repair of frequency converters (inverters). Repair of servomotors (servomotors). Repair of sensors: encoders (incremental, absolute), resolvers. Repair of servo converters (servo drives, servo amplifiers). Repair of soft starters (soft starters). Repair of industrial electronic boards (printed circuit boards, etc.). Repair of components of CNC machine tools (CPU). Repair of industrial power supplies.
LLC "Niocr-Trade"
Russia
USD
7.42/pcs
LLC "R&D-TRADE;" Official distributor of Christmas garlands. At the moment, we can offer 2 types of garlands in bulk, 💥💥💥 - certification and white customs: 💥- 3x3 meters warm white rain ☀️ cold white - 8 modes, you can connect several garlands together. 🎊 300 diodes. Price RUB 645 VAT included. 💥- 3x1.5 meter figures (stars, trees, deer, bell). warm white☀️ - 8 modes, you can connect several garlands. 🎊 126 diodes. Price RUB 650 VAT included. Payment on account. Minimum order 300 pcs. They will be available for shipment by the end of October. From Moscow. Write to the mail to make an order
USD
1000.0/pcs
SD3 is a selfeeder drilling unit with an oil damper for air feed or hydraulic valve to control the feeding rate. The accuracy of spindle nose is strictly under 0.003mm and maximum drilling capacity up to 6mm (S45C). This unit allows to perform all types of machining applications such as drilling, chamfering, reaming and countersinking. Feature:
1.Standard 3-phase AC motor 0.4kW is included, optional maximum power up to 0.75kW 2. Belt driven at fixed speed and incorporate a Poly-V belt 3.Spindle taper ER16, JT1 and JT2 are available 4.Available for servo driven at variable speeds 5.OMRON proximity switch sensors and stand are furnished 6. AC Induction Motor protection IP 54
USD
1000.0/pcs
SSD03 spindle unit is designed servo feeding with ball screw grade C5 and servo motor, the accuracy of spindle nose is strictly under 0.003mm and maximum drilling capacity up to 6mm (S45C).
This unit allows to perform all types of machining applications such as drilling, tapping, chamfering, reaming and countersinking.
Feature:
1. Standard 3-phase AC motor 0.4kW is included, optional maximum power up to 0.75kW
2. Belt driven at fixed speed and incorporate a timing, V or Poly-V belt
3. Feed rate is programmable and driven by preferable servo motor
4. Feeding is driven by HIWIN or PMI Grade C5 ball screw
5. Spindle taper ER16, JT1 and JT2 are available
6. Available for servo driven at variable speeds
7. OMRON proximity switch sensors and stand are furnished
8. AC Induction Motor protection IP 54
Weng Neil
Taiwan
USD
100.0/pcs
EROCORE commits to：
• Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe.
• Promote the prevention of pollution.
• Continually improve the effectiveness of our environmental management system.
Current Status：All EROCORE products are fully compliant with the RoHS Directive.
Product Manual:
1. Performance low resistance, high current rating.
2. Low loss realized with low RDC.
3. Low core loss.
Weng Neil
Taiwan
USD
100.0/pcs
EROCORE commits to：
• Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe.
• Promote the prevention of pollution.
• Continually improve the effectiveness of our environmental management system.
Current Status：All EROCORE products are fully compliant with the RoHS Directive.
Product Manual:
1. Low profile very effective in space-conscious applications.
2. Low resistance and high energy storage.
Weng Neil
Taiwan
USD
100.0/pcs
EROCORE commits to：
• Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe.
• Promote the prevention of pollution.
• Continually improve the effectiveness of our environmental management system.
Current Status：All EROCORE products are fully compliant with the RoHS Directive.
Product Manual:
1. Coating epoxy resin that ensures the humidity resistance to be long life.
2. Contribute to be high Q and self-resonant frequencies.
Weng Neil
Taiwan
USD
100.0/pcs
EROCORE commits to：
• Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe.
• Promote the prevention of pollution.
• Continually improve the effectiveness of our environmental management system.
Current Status：All EROCORE products are fully compliant with the RoHS Directive.
Product Manual:
1. High magnetic permeability.
2. Excellent saturation flux density.
3. Low power loss.
Weng Neil
Taiwan
USD
100.0/pcs
EROCORE commits to：
• Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe.
• Promote the prevention of pollution.
• Continually improve the effectiveness of our environmental management system.
Current Status：All EROCORE products are fully compliant with the RoHS Directive.
Product Manual:
1. Minimal effect on transmission waveforms.
2. Can be added as First-Aid, On-The Spot countermeasures when equipment or devices fail.
Weng Neil
Taiwan
USD
100.0/pcs
EROCORE commits to：
• Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe.
• Promote the prevention of pollution.
• Continually improve the effectiveness of our environmental management system.
Current Status：All EROCORE products are fully compliant with the RoHS Directive.
Product Manual:
1. Low profile alloy power inductor (Alloy Core) .
2. Magnetic shielded construction.
3. For new generation portable product D/D converter unit.
Weng Neil
Taiwan
USD
100.0/pcs
Wire Wound Inductors（Ceramic), RF Chip Inductor Series-NL
EROCORE commits to：
• Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe.
• Promote the prevention of pollution.
• Continually improve the effectiveness of our environmental management system.
Current Status：All EROCORE products are fully compliant with the RoHS Directive.
Product Manual:
1. Very strong solderability by reflow soldering and soldering iron or wave soldering.
2. Highly accurate dimensions can be mounted automaticlly.
3. Terminals are highly resistant to pull forces.
4. High reliable in environments of sudden temperature change and humidity.
5. Highly resistant to mechanical shocks and presure.
6. Superior Q characteristics and broadest selections amount peers.
Weng Neil
Taiwan
USD
100.0/pcs
EROCORE commits to：
• Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe.
• Promote the prevention of pollution.
• Continually improve the effectiveness of our environmental management system.
Current Status：All EROCORE products are fully compliant with the RoHS Directive.
Product Manual:
1. Pair and triple wire coil for high stability and high balance.
2. Available in tape & reel for automatic surface mounting.
Weng Neil
Taiwan
USD
100.0/pcs
EROCORE commits to：
• Meet or exceed the compliance requirements of all applicable environmental legislation, regulations, and other voluntary requirements to which we subscribe.
• Promote the prevention of pollution.
• Continually improve the effectiveness of our environmental management system.
Current Status：All EROCORE products are fully compliant with the RoHS Directive.
Product Manual:
1. Closed magnetic circuit avoids crosstalk.
2. Suitable for flow and re-flow soldering.
3. Available in 5 sizes.
4. High frequency Chip Inductor with 100% Lead(Pb) & Halogen-Free and RoHS compliant.
Weng Neil
Taiwan
USD
100.0/pcs
Product manual:
1. Suitable for flow and reflow soldering.
2. Standard type used to suppress lower-frequency, lower current signals.
3. The products contain no lead and also support lead-free soldering.
Application:
Removal of signal line noises of cellular phones, PCs, notebook PCs, TVs, TVs tuners, STBs, Audio players, DVDs, DSCs, Game machines, digital photo frames, PNDs, Car Navigation system, etc.
Ximeconn Technology Co., Ltd
Hong Kong
USD
2.35 - 3.8/pcs
1.MATERIAL: 2. BODY:THERMOPLASTIC,UL94V-0. 3.CONTACT:COPPER ALLOY. 4.SPECIFICATIONS: 5. RATED CURRENT: POWER 20-70A AMP, SIGNAL 3AMP. 6. RATED VOLTAGE:500V DC.
Ximeconn Technology Co., Ltd
Hong Kong
USD
3.0/pcs
1. MATERIAL: 2. HOUSING: THERMOPLASTIC, UL94V-0. 3. CONTACTS: COPPER ALLOY. 4. TECHNICAL CHARACTERISTICS: 5. RATED CURRENT: POWER 20-70 A, SIGNAL 3 A. 6. RATED VOLTAGE: 500 VDC.
Mayrek Inc.
Turkey
USD
200.0/pcs
AKA010-DR200 2m. SIZE LED LIGHTING ALUMINUM BODY 15x15x200 cm. AKA010-DR300 3m. SIZE LED LIGHTING ALUMINUM BODY 15x15x300 cm.
EDWARDOPT
Ukraine
USD
6.2/pcs
Crown Gp greencell saline - 0.62 $ For 1 piece, order from 1 block (10 pieces)
EDWARDOPT
Ukraine
USD
6.0/pcs
Batteries Power Flash alkaline R6 and R3 $ 0.15 For 1 piece, order from 40 pieces (1 block)
Distributor
Kyrgyzstan
USD
0.0/pcs
The switch is wireless, battery-free, wave principle of operation up to 100 meters. Works through the application from a smartphone.
The final amount with VAT is 2050 rubles. / set: one-button switch + relay / breaker). Price for 100 sets. Excluding delivery.
An innovative product
EDWARDOPT
Ukraine
USD
4.5/pcs
Batteries Power Flash salt available R3 and R6 size price $ 0.075 for 1 piece, order from 1 block (60 pieces)
IMPORT and EXPORT TRADER
Netherlands
USD
0.7/pcs
We have a large amount of C7 cables in stock!
All cables are in excellent condition. In addition, they are all used, tested & working. Suitable for televisions, game consoles and other devices with a C7 connector.
A minimum purchase of 4000 pieces applies to this lot. We have a total of 8000 pieces in stock.
Collection and viewing possible in our warehouse.
HUAYUE New Energy
China
Specify the price
The control unit adopts tilt Angle sensor feedback + closed-loop control system, which has higher tracking accuracy and higher reliability.Power generation can be increased by about 35-50% compared with the fixed type;The bracket is compatible with all the market panel specifications, better design versatility;With wireless group control function, cost is more economical;With strong wind protection and automatic snow removal function, the system is more safe and stable;Rain water cleaning mode, intelligent control, independent use of rain water cleaning components, reduce the operation and maintenance costs;With no shadow tracking function, greatly extend the light time, improve the system power generation;The operating power of the system is small, and the system's daily self-consumption is less than 1.5kwh.Strong terrain adaptability, slope, hill, mountain can be installed;Software and hardware support lifelong upgrade service, so that your products always apply the latest generation of technology
Fonelight
Turkey
Specify the price
Length Options Lamp Type Total Lumen Total Watt Volt Color Temperature 1000 / 750 / 350 LED 2000 15W 12V 3000K-4000K-6500K IP/ 65 Protection Class / IP 65 Protection Class Aluminum Body Structure / Aluminum Body LED Lighting Fixture / LED Lighting Tempered Glass / Tempered Glass Electrostatic Powder Paint / Electrostatic Powder Paint
Sichuan Aitong Wire & Calbe Inc.
Deyang, China
Specify the price
This kind of cable has excellent low temperature resistance and abrasion resistance, as well as fatigue resistance and microbial resistance, and has excellent corrosion resistance to oils and chemicals.
Reference standard: DIN VDE;
Working voltage: 450/750V;
Working temperature (fixed installation): -45℃～+110℃;
Working temperature (mobile installation): -25℃～+110℃;
Minimum bending radius: fixed installation: 4× outer diameter of cable, mobile installation: 5× outer diameter of cable
Test AC withstand voltage: ≤0.75mm2 2000V ≥1mm2 3000V
Cable structure: Conductor: conform to IEC60228 standard 5;
Insulation: Comply with VDE 0270 Part 20;
Core wire identification: black core wire and white numbers are consecutively numbered, with a yellow and green two-color ground wire;
Shielding: the braid density is not less than 85%.
Sheath: in line with VDE standards.
Sichuan Aitong Wire & Calbe Inc.
Deyang, China
Specify the price
This kind of cable has excellent low temperature resistance and abrasion resistance, as well as fatigue resistance and microbial resistance, and has excellent corrosion resistance to oils and chemicals.
Reference standard: DIN VDE;
Working voltage: 0.6/1kV;
Working temperature (fixed installation): -45℃～+110℃;
Working temperature (mobile installation): -25℃～+110℃;
Minimum bending radius: fixed installation: ≥4×outer diameter of cable, mobile installation: ≥5×outer diameter of cable;
Torsion test: at -40℃, torsion 6000 times, each time is 4 weeks (1440º);
Voltage test: 3500V/5 minutes.
Cable structure: Conductor: conform to IEC60228 standard 5;
Insulation: Comply with VDE 0270 Part 20;
Sheath: in line with VDE standards.
Sichuan Aitong Wire & Calbe Inc.
Deyang, China
Specify the price
Classification profile:
Products such as glass filament covered wire, glass filament coated enameled wire, glass filament covered film winding wire, glass filament covered polyester filament covered wire are special materials specially made for various types of motors, welding machines, and generator coils.
DC resistance per unit length (R20)≤0.017241Ωmm2/m; self-adhesive performance requirements, after heating the sample for 20min, self-adhesive ≥2MPa; temperature grade: according to different needs, temperature grades are 130, 155, 180, etc.
Sichuan Aitong Wire & Calbe Inc.
Deyang, China
Specify the price
Enameled rectangular wire is a winding wire made of oxygen-free copper rods or electrical round aluminum rods drawn or extruded by a certain specification die, and coated with insulating paint many times. Enameled rectangular copper wire can be used alone, or it can be made into enameled glass wire covered wire and other products. It is a material for the manufacture of transformers, motors, generators and coils of various electrical devices.
According to different needs, the operating temperature is 120, 130, 155, 180, 200, 220ºC; DC resistance: DC resistance per unit length (R20)≦0.017241Ω mm2/m; electrical performance: at least 4 samples in each sample The breakdown voltage value meets the requirements of the following table, and the breakdown voltage value of one sample is not less than 5% of the value specified in the table below; Adhesion: After the sample is stretched as required, the distance where the paint film loses adhesion should Greater than 1b; Bending: After the sample is bent according to the standard, the paint film should not crack; Self-adhesive: After the sample is treated and cured according to the standard, the tensile force of the bonding surface should be greater than 4.5N/mm2.
Sichuan Aitong Wire & Calbe Inc.
Deyang, China
Specify the price
Double polyester glass fiber sintered wire is a special material for the manufacture of large generator coils
DC resistance: DC resistance value per unit length (R20)≦0.017241Ω mm2/m; Insulation flexibility: After the sample is bent according to the standard requirements, there should be no obvious cracking or falling off of the insulation layer
Sichuan Aitong Wire & Calbe Inc.
Deyang, China
Specify the price
Product introduction:
The combined wire can be composed of 2 or more flat winding wires in a wide-side or narrow-side overlapping arrangement. According to the combination and winding method, it can be divided into flat-stacked, side-by-side and force-stacked; then wrapped with specific insulating materials It is a product designed for the winding of large and medium-sized transformers. It can also be made into semi-hard combined wires.
Product performance:
1. Nominal specifications of a single copper wire: side a: 1.0-5.0 side b: 2.0-16.0.
2. Insulation: If the user has no requirements for insulating paper varieties, our company will use DLZ cable paper for wrapping.
3. Withstand voltage: No breakdown between two adjacent single paper-covered wires subjected to a DC 200V voltage test.
4. DC resistance:
(1) Soft-state DC resistance: The resistance value (R20) of a single core wire is not more than 0.017241Ω mm2/m.
(2) Semi-hard DC resistance: Depending on the hardness, the resistance value (R20) of a single core wire is between 0.017241-0.01777 Ω mm2/m.
5. Resistance imbalance: The resistance imbalance between two adjacent single paper-covered wires is not more than 2%.
6. Nominal hardness value of semi-hard wire:
σ0.2 rated value (N/mm2): 120, 150, 180, 200, 220
Sichuan Aitong Wire & Calbe Inc.
Deyang, China
Specify the price
Product introduction:
Ordinary paper covered wire is a special material for coil windings of oil-immersed transformers and similar electrical appliances. The temperature index after immersion is 105ºC. Using NOMEX paper wrapping can be used in the production of dry-type transformers, with a temperature index of 220ºC, and can also be made into semi-rigid paper-covered wires. According to user requirements, telephone paper, cable paper, high-voltage cable paper, turn-to-turn insulation paper, Denison paper, etc. can be used respectively.
Specific instructions:
1. DC resistance:
(1) Soft-state DC resistance value (R20) ≤0.017241Ω mm2/m.
(2) The semi-hard DC resistance value is 0.017241-0.01777Ω mm2/m according to the hardness.
2. Winding and bending: After the sample is wound and bent according to the standard, the wrapping layer should not crack, show seams, and have no obvious warping edges.
3. Half hardness: σ0.2 rated value (N/mm2): 120, 150, 180, 200, 220
The official Qoovee website helps you make profitable deals, find a supplier and manufacturer to grow your business. In the “Directory of suppliers” section you can find for yourself everything you need: Electrical equipment and parts from Russia, Kyrgyzstan, Kazakhstan, Turkey, Ukraine and other countries. Product categories are constantly updated. Wholesale suppliers are looking for wholesale purchases and partnerships and are ready for mutually beneficial cooperation.
