Laboratory equipments in bulk on Qoovee

FEATURES: - The 40cm diameter sterilization chamber offers large space to meet various sterilization requirements. - The latest Inspiration microcomputer high-speed intelligent control system is highly reliable to not only realize complete control of the sterilization process, but also ensure convenient maintenance, query, calibration, recording and future scalability. — Special waste sterilization procedures have been established for effective sterilization of laboratory waste. — Thorough drying in accordance with CE standard. — Simple and clear control panel. — Several sterilization procedures and heating procedures are provided, such as sterilization, heating and drying of solids and liquids, melting and heating of agars. There are up to 60 cycles that can be created and saved for quick use. - Unique "eight-column evenly distributed" locking device is safer and more reliable than conventional locking devices.

Description Mobile support with micrometric control. Placing controls manually by micrometer. Dimensions: 185X145mm; Travel: 25mm (X) x 25mm (Y); Micrometric controls resolution: 0.01mm.

Description For applications subject to verification, also request initial verification at the same time because it cannot be done later. Factory verification, we need place of installation with zip code. Indication of capacity. A rising strip of light indicates the weighing range still available 4-digit identification number, freely programmable via 2 keys Robust and stable metal cover Technical data: Additional technical measurement data: 627- ABJ220-4M Max measuring range: 220 g Reading d: 0.0001 g Reproducibility: 0.0001 g Linearity: ± 0.0002 g Stabilization time: 5 s Sensitive deviation (° C): 2 * 10 ^ -6 Housing dimensions WxDxH: 225x315x330 mm Housing material: metal Windshield WxDxH mm: inside: 190x159x225 mm Windshield material: glass Packaging dimensions WxDxH (mm): 500x390x535 Gross weight kg: 9 Net weight kg: 7 Weighing pan dimensions (Ø / AxP): 8 cm

Description For applications subject to verification, also request initial verification at the same time because it cannot be done later. Factory verification, we need place of installation with zip code. Large, backlit LCD display with 52mm high digits Industrial quality: Ideal for long-lasting use in the industrial sector thanks to its stable construction and its robustness Table base plate wall support for indicating device, standard Weighing with tolerance range (check-weighing): Entry of an upper / lower limit value. An optical and acoustic signal facilitates the process of rationing, dosing or classifying by way of counting Sum of weight values Dynamic weighing: a stable mean value is created at the press of a key in the event of uneven ambient conditions or animal weighing Technical data: Max measuring range: 30 kg; 60 kg Reading d: 10 g; 20 g Reproducibility: 10 g; 20 g Linearity: ± 10 g; 20 g Stabilization time: 2 s Sensitive deviation (° C): 5 * 10 ^ -6 Housing dimensions WxDxH: 560x300x490 mm (incl. Pole) Housing material: plastic Packaging dimensions WxDxH (mm): 470x800x240 Gross weight kg: 12 Net weight kg: 10 Weighing pan dimensions (Ø / AxP): 400x300x128 mm

Description Biological binocular microscope, lens 4x, 10x, 40x, 100x Binocular biological microscope with 4x, 10x, 40x and 100x objectives. This type of equipment is recommended for research centres, laboratories or hospitals. It allows for viewing in detail cells, bacteriae, fungi or tiny tissues. Lenses: Magnification: 10x Focal length: 25 Lens diameter: 18 mm / 0.7 in Features: Head: binocular Swivel: 360 ° Inclination: 45 ° Eyepieces: WF 10x18 mm (2 units) WF 16x (2 units) Objectives: plan achromatic 4x, 10xPh, 40xPh, 100xPh (immersion). Revolving nosepiece: quadruple Stage: DIM 160 x 142 mm (6.3 x 5.6 in), movement range 76 x 52 mm / 3 x 2 in Focus range: 14 mm / 0.5 in Condenser: 1.25 NA Abbe with centering system Illumination: white LED, with brightness control Dimensions: Length: 140 mm / 5.5 in Width: 190 mm / 7.48 in Height: 350 mm / 13.8 in Weight: 3 kg (6.6 lb) approx

Micromotor for podiatry model Micronam300 which can reach a maximum speed of 35000 rpm. Features an ergonomic and functional design. Moreover, it has an automatic stop switch in order to avoid malfunctions.  

Description VORTEX shaker with speed control Features: Can work continuously or discontinuously by contact Analogue speed control in the range of 0 - 2500 rpm Clicking adapter fixing system providing security Strong housing in casting with good stability Silicon pads and steel base specially designed to absorb the vibrations Eccentric wheel bearings Plate dimensions: 182x450mm Technical specifications: Power(W) 60 Shaking movement orbital Diametr of shaking orbit (mm) 4 Allowable working time 100 % Rango Velocidad (r.p.m.) 0 - 2500 Precisión ajuste de velocidad (r.p.m.) Analógico Tipo de funcionamiento modo continuo / modo por contacto Dimensiones (L x l x h) (mm) 127 x 130 x 160 Peso Weight (Kg) 3,5 Clase de protección según DIN EN60529 IP 21

Description Single Arm Base head supports.Measurements:      Base: 230 x 230 mm      Vertical bar column: Ø32x380mm      Horizontal arm: 430 mm

Description Printer for autoclaves 922. Features: External Printer: Prints the details of the programme cycle. Includes 1 paper roll Measures: Height: 7.2 cm Width: 8.5 cm Depth: 11.5 cm

Description Autoclave Black Dragon 12 liters class B for tattoo studios. Programmes:   Programmes Temperature Pressure Sterilisation time Total time Type Max. load Max. load per tray Solid 134 0C 210 kPa 4 min 14-30 min Solid unwrapped 4 Kg 1.2 Kg 1210C 110 kPa 20 min 30-45 min Wrapped 134 0C 210 kPa 4 min 30-45 min Solid unwrapped 3.5 Kg 1.1 Kg 121 0C 110 kPa 20 min 35-55 min Solid or hollow simple wrapped 3.5 Kg 1.1 Kg Liquid 134 0C 210 kPa 10 min 30-55 min Liquid 0.80 kg 0.25 kg 121 0C 110 kPa 30 min 35-60 min Textile 134 0C 210 kPa 8 min   30-50 min Porous unwrapped 1 Kg 0.3 Kg Porous simple wrapped 0.75 Kg 0.2 Kg 121 0C 110 kPa 30 min 40-60 min Porous double wrapped 0.5 Kg 0.15 Kg Hollow simple wrapped 3.5 Kg 1 Kg Solid or hollow double wrapped 1.5 Kg 0.5 Kg Prion 134 0C 210 kPa 18 min 30-50 min Porous unwrapped 0.1 Kg 0.3 Kg Porous simple wrapped 0.75 Kg 0.2 Kg Porous double wrapped 0.5 Kg 0.15 Kg Hollow simple wrapped 3.5 Kg 1 Kg Solid or hollow double wrapped 1.5 Kg 0.5 Kg B&D test 134 0C 210 kPa 3.5 min 22-35 min - - - Helix test 134 0C 210 kPa 3.5 min 22-35 min - - - Vacuum test - - - 18-20 min - - - Safety: A cycle will not start unless the door is firmly closed. An automated system with double hydraulic locking device prevents the door from opening while chamber is pressurized. The safety valves prevent overpressure in the generator and in the chamber. A safety thermostat prevents overheating in the chamber and in the generator. An automatic safety lock prevents accidental opening of the door during the sterilisation. A power protector automatically cuts off power in case of short circuit or if power supply is not very stable. The failure alarm indicates a cycle failure and provides an error code. The door alarm indicates that the door is not properly closed. The low water alarm indicates when the water tank is empty or too full.  Technical features: Power supply: 220-240V; 50/60Hz; 10A Chamber: 200 x 360 mm Breaker: F16A / 400V Nominal power: 2200VA Sterilisation temperature: 121 0C / 1340C Capacity of the distilled water tank: 2.5 L Working temperature: 5 0C / 40 0C Working relative humidity: Max. 80%, non condensing Overall dimensions: 414 x 365 x 570 mm Net weight: 51 Kg Max. noise level: <70 dB Atmospheric pressure: 76 / 106 kPa Components: Distilled water tank LCD display Control panel Main power switch Drain connector (distilled and used water tank) USB port Safety valve Ventilation grid Circuit breaker Power cable Rating plate Accessories included: Steriliser USB 3 instrument trays Tray rack Tray holder Door adjustment tool 2 draining hoses Door gasket User manual Standards: 93/42/EEC Directive on Medical Devices. 97/23/EEC Directive on Pressure Equipment. EN 13060 Small Steam Sterilisers. EN 61326, EN 61000 Electromagnetic Compatibility. EN 61010-1, UL 61010-1 Safety requirements. EN 61010-2-040, IEC 61010-2-040 Specific requirements for steam sterilisers used for treatment of medical materials. AUTOCLAVE - step by step: Open the door, take the tools and accessories that are within the sterilisation chamber, remove the wrapper and clean them. Connect the power cord to a suitable power source. Connect the printer (optional. It is sold separately, ). Switch on: The main switch is located on the right bottom area in the front panel. Once activated, the LCD screen is on, where basic operation icons such as the position of the door, the water level, the sterilisation programme, date, time, etc. appear. Fill tank with distilled water. Remove the top lid and fill, if you hear a signal, it means that you exceeded the permitted level of water in the tank, please stop immediately and drain the amount of water necessary for the signal off. Preparation of instruments: Place instruments made of different materials in different trays, however take care to separate them before sterilisation. If the instruments are not stainless steel, put some sterilisation paper between the tray and the instruments. Do not allow direct contact between instruments of different materials. Verify that all instruments are in correct position. Place instruments such as lenses, containers, tubes, etc. inverted, so that water does not stagnate within them. Do not overload the trays beyond their limit. Do not overlap the trays on top of each other, or put them in direct contact with the wall of the sterilisation chamber. Do not use metal clips or pins, this may impair the operation of the steriliser. Wrap the instruments one by one. If you need to wrap several instruments together, make sure that they are made of the same material. Seal the pouch with special adhesive tape for sterilisation or use a heat sealer. Make sure that the pouch is properly positioned within the chamber on the trays (resting on the plastic part). Choose the sterilisation programme. Start the sterilisation cycle. After selecting the sterilisation programme, insert instruments into the chamber on the trays, using the supplied plastic handle. Once the instruments are placed within the chamber, close the door by turning the knob. Caution: make sure to close the door, otherwise the steriliser displays an alarm and can not start or the programme stops during the cycle. Start the sterilisation programme. Press the start button, then the steriliser starts operating during approximately 30-75 minutes. Sterilisation cycle finished. After finishing the sterilisation cycle, the printer (not included*) will print the full report automatically and the data will be saved in the USB memory (.txt format). After the pressure drops to zero, you can open the door and remove the instruments. The steriliser alerts by a beep once the sterilisation cycle is completed. Caution: Use the supplied plastic handle for supporting trays when you take out the instruments. IMPORTANT: Do not reuse used water. Installation: There must be at least 10 cm of free space around the steriliser, 25 cm at the top, and enough room to open the door. The place where the steriliser is used must have proper ventilation. The steriliser must be placed on a stable surface and at an appropriate height for handling. Do not cover or block the lateral outlets or the outlet air grid of the condenser fan. Do not place the steriliser near water sources. Keep away from heat sources. Example of printed report: ================================Programme: WRAPPED Temperature: 134CPressure: 206.0 kPaDrying time: 08minSterilisation time: 4.0Min--------------------------------Time Temp. pressureStart 12:28:17 089.0CT1: 12:31:32 087.1C -075.0kPaT2: 12:33:43 110.2C 052.0kPaT3: 12:36:37 088.9C -080.0kPaT4: 12:39:20 114.7C 053.7kPaT5: 12:43:37 087.9C -080.0kPaT6: 12:50:40 134.8C 206.0kPaTS: 134.7C 209.5kPaMax. Temperature: 135.2CMin. Temperature: 134.3CMax. Pressure: 214.0kPaMin. Pressure: 204.9kPaT7: 12:54:39 134.4C 211.4kPaT8: 12:57:36 102.1C -060.0kPaT9: 12:59:54 098.2C -060.0kPaEnd 13:04:07 102.4C--------------------------------Cycle No .: 00017Result: successDate: 07/06/2014SN: E54723operator:================================

Description Autoclave Prestige 2100 Classic 9 litres. Characteristics: Designed to sterilize unwrapped solid instruments.   Capacity 9 Litres. With basket for instruments sterilisation Technical specifications: Height  335 mm Width  340 mm Weight 4.5 Kg Capacity 9 litres Dimensions of the internal chamber (depth / height) 210/230 mm Maximum length of the instruments 228 mm Maximum weight of load  3.0 Kg Operating pressure 1,4 bar Voltage  230V Power 1500W Frequency  50-60Hz Temperature 121º Sterilisation time  11 minutes Total cycle time 22 minutes Water volume  0.75 litres

Description New easy-to-handle mini T bath designed with a special size so compact it fits in the palm of your hand. It has multiple interchangeable metal blocks and precise temperature control that give it great versatility of use in biochemical, medical, chemical or veterinary research laboratories, resulting especially in great application in molecular and genetic biology (DNA samples, lipid extraction and other cellular components, protein denaturation, etc.). Characteristics: Easy to program and use LCD display Simultaneous display of actual and programmed time and temperature Temperature drift adjustment allows adaptation to different needs Acoustic signal of program end. Mini-dimensions: its size is so compact that it fits in the palm of your hand. Various aluminum blocks available (not included) to cover a wide range of tubes (From 2.0 ml to 50 ml) and other types of containers. Technical characteristics: Temperature range: RT + 5 ºC - 80 ºC Timer: 1 - 999 s / 1 - 999 Min Temperature control precision: ± 0.5 ºC Temperature resolution: 0.1 ºC Heating time (from 20ºC to max. Temperature): ≤12 min Temperature control precision at: 40ºC 0.3 ºC Dimensions (L x W x H): 110 x 150 x 80 mm Weight: 0.5 Kg

Description Binocular microscope 1000x, E-PLAN objectives, X-LED illumination. Educational and laboratory microscope for routine applications. Metal frame, with high stability and ergonomy, for transmitted light observation. Features: Illumination: Light source: X-LED with white LED; light intensity control using a knob on left side of the frame. LED power: 3.6 W, comparable to a 50W halogen bulb. Colour temperature: 6300 K. LED shelf life: 50,000 hours. Power supply: 100/240 Vac, 50/60 Hz, output voltage 6 Vdc. 1 A. Max. required power: 7 W. Observation mode: Brightfield. Focusing: Coaxial coarse and fine focusing mechanism (graduated, 0.002 mm) with upper stop, to prevent the contact between objective and sample. Adjustable tension of focusing knob. Stage: Double layer sliding stage, size 150 x 133 mm, X-Y movement range 76 x 30 mm, with clip for a specimen. New BELT system in X direction with smooth sliding and less risk of breakdown. Vernier scale on X-Y axes, accuracy 0.1 mm. Nosepiece: Quadruple, rotation on ball bearings. Head: Binocular observation head, inclined 30° and rotatable 360°. Diopter adjustment on left eyepiece. Interpupillary distance adjustment: 48-75 mm. Eyepieces: Widefield eyepieces WF10X/20 with 20 mm field of vision. Objectives: E-Plan objectives, tube length 160 mm, composed of the following objectives: -) DIN 4X, N.A. 0.10, working distance 15.2 mm. -) DIN 10X, N.A. 0.25, working distance 5.5 mm. -) DIN 40X, N.A. 0.65, working distance 0.45 mm. -) DIN 100X, N.A. 1.25, working distance 0.13 mm (oil immersion). All objectives have anti-fungus treatment. Condenser: Abbe N.A.1.25 , centering system, height adjustment by rack and pinion. Dimensions: HEIGHT: 370 mm . WIDTH: 235 mm. LENGTH: 290 mm. WEIGHT: 6.5 kg. Accessories: Instruction manual and dust cover.

Description Digital orbital shaker 685/2. Shaker with big platform suitable for a wide range of vessels such as Erlenmeyer flasks, test tubes, beakers, microtiter plates, trays, etc., offering a wide range of applications. The platform describes a circular movement with 20 mm runout, generating a slight wavy movement in the solutions being shaked. The shaking platform includes a non-slip surface and two springs to hold the vessels during the process. Furthermore, the device has 4 suction pads in its base to ensure a perfect balance. Features: Suitable for any kind of vessel. Timer 0-120 min. Circular shaking 20 mm. Very good stability. Digital indicator for stirring speed. Speed: 30-240 rpm. Platform size: 260 x 360 mm. Dimensions: 260 x 360 x 200 mm.

Description Microscope B-190TB. Didactic and laboratory microscope for routine applications, with built-in camera and removable 8.9” full HD tablet included. Stable and ergonomic metal stand that allows observation with transmitted light. Tablet with OPTIKA exclusive removable stand. Features: Handling: The “tablet” can be tilted in all directions what facilitates vision during demonstrations. The simultaneous data and power feed make this machine ideal for long term operation. The “tablet” can be detached from the microscope and used as a laptop. Optical system: The optical system has been developped for the most demanding users; it consists of high quality components which guarantee a high image contrast and an excellent optical resolution. The optical components have been designed and treated with special techniques to prevent the formation of moulds and fungi. Stand: The stand has a modern and ergonomic design. It is easy to carry the microscope thanks to the large opening behind the revolving nosepiece, to be used as a handle. The opening allows the user to see clearly the objectives and the samples used in discussion groups. Mechanics: The moving parts are made by means of a computerized numerical control system reducing manufacturing tolerance and increasing the reliability of the instrument. The strict controls on materials and production processes comply with ISO 9001:2008 quality system. Illumination: X-LED² type with white LED; light intensity control using a knob on left side of the frame. LED power 3W, comparable to a 30-35W halogen bulb. Camera: Digital camera resolution: 3.14 Mpx. Signal output: USB 2.0 - Sensor size: 1/2.5” Sensor technology: CMOS- Image format: 4/3 Full Image Size: 2048x1536. NO driver (microsoft driver). Capture features: continuous auto exposure, image size, image capture, compressed video capture. Control parameters: brightness, gain, exposure time, colors, color enhancement. Technical data: "Tablet" specifications: Model 8.9” tablet Operating system Windows 8.1 32-bit, Microsoft Office 365 Personal (1 year subscription) Language Multi – language CPU Intel® Bay trail Z3735F, Quad core CPU speed 1.83 GHz Graphic card Intel® HD Graphics, LPDDR3 controller Memory Ram 2,048 GB, LPDDR3 LCD display LED 8.9” IPS Touch screen LCD resolution 1920 x 1200 Full HD, Active Matrix TFT colour LCD Storage HDD 16+16GB Network Wireless IEEE 802.11 a/g/nBluetooth 4.0 Input/output ports Micro USB-B - MicrophoneMicro SD card - Micro HDMIHeadphones - Separated power supply input Control buttons Auto rotate off, volume control Battery technology Lithium-ion battery, 2x cell Battery capacity 6000mAh Maximum charge 10 W Battery life Up to 10 hours, up to 5.5 hours in continuous Camera Live View mode. Battery plugging Transformer 5.35V 2A Europlug connection for 110-240 VAC, USB port and cable Dimensions Thickness 9.5mm, height 15.7 cm and width 22.0 cm Weight 415 g Cables included USB camera cable, OTG cable Accessories included Instruction manual, touch pen and touchpad  Microscope specifications: Model Binocular with double layer stage, objectives 4x 10x  40x 100x Head Binocular Digital observation head, inclined 30° and rotatable 360°.Diopter adjustment on left eyepieces.Interpupillary adjustment 48-75 mm. Observation type Brightfield Eyepieces Widefield eyepieces WF10X/18 with field number 18mm. Nosepiece Nosepiece Quadruple revolving nosepiece, rotation on ball bearings. Objectives Achromatic objectives with mechanical tube length 160 mm, made by following objectives: -) Achromatic DIN 4X, A.N. 0.10, W.D. 18 mm-) Achromatic DIN 10X, A.N. 0.25, W.D. 7 mm-) Achromatic DIN 40X, A.N. 0.65, W.D. 0.53 mm-) Achromatic DIN 100X, A.N. 1,25, W.D. 0.13 mm (oil immersion) All objectives are treated with an anti-fungus treatment. Stage Double layer with mechanical sliding stage, size 125x115mm, X-Y movement range 70x30Vernier scale on the two axes, accuracy 0.1 mm. Focusing system Coaxial coarse and fine focusing mechanism (graduated, 0.002mm) with upper stop, to prevent the contact between objective and specimen.Adjustable tension of coarse focusing knob. Illumination Light source type X-LED² with white LED; light intensity control using a knob on left side of the frame.LED power 3W, comparable to an halogen bulb 30-35W.Colour temperature: 6300KLED average life time approx. 50,000h.Voltage: external power supply 100/240Vac, 50/60Hz, output: 6 V Max power required: 7W   Condenser Abbe condenser N.A. 1.25 precentered Dimensions Height: 400 mmWidth: 235 mmLength: 290 mmWeight: 7.0 kg  Camera specifications: Digital camera resolution 3.14 MegaPixels Analog camera NO Signal output USB 2.0 Audio signal NO Sensor size 1/2.5” Sensor technology CMOS Image format 43 Image size 2048 x 1536 Pixel size 2.2 x 2.2 micron Frame rate full resolution 5 frames/sec Frame rate other resolutions 8 FPS (1280x1024), 30FPS (640x480) Sensitivity 0,53 V/Lux-second (550 nm) Signal/noise ratio 40 dB Dynamic range 66.5 dB Max exposure time 1.5 sec ADC conversion 12 BIT Colour depth 8 BIT Camera IR filter 680 nm White balance Auto - Man Gain control Auto - Man Back light control Auto - Man Exposure control Auto - Man Accessories: Calibration slide Yes Software specifications: Supplied software Optika Vision Lite (full view function is also included for a wider Live Camera view) Driver type No driver (microsoft driver) Capture features Continuous auto exposure, image size, image capture, compressed video capture Control parameters Brightness, gain, exposure time, colour,  colour enhancement. General specifications: Operation temperature +0 to +60°C Storage temperature -20 to +70° Relative humidity 45% to 85%  

Description Amalgam capsules vibrator. Features: Metal fork suitable for all sorts of capsules on the market Speed range from 2,800 to 5,500 rpm LCD display with Start and Stop button Adjustable from 1 to 99" Safe, accurate and silent

Description PRE-TARE function for manual previous reduction of weight in a vessel, useful for filling quantities control. Accurate counting: The automatic optimisation of references improves gradually the average value of the weight of a counting piece. Weighing unit freely programmable, e.g. for direct indication in thread length g/m, paper weight g/m2, or similar. It can be used with batteries, 6 batteries x 1.5 V Size C not included, working time approx. 40 h.   Reference Weighing range (Max) Kg Readout (d) g Verification value (e) g Reproducibility g Linearity g Minimum weight per piece (counting) g/piece Verification option 627-FKB-16K01 16 0.1 - 0.1 0.3 0.1 no 627-FKB-36K01 36 0.1 - 0.2 0.5 0.1 no   Technical sheets: 627-FKB-16K01 (16000 g): Design Housing dimensions (W x D x H): 350 mm x 390 mm x 120 mm Weighing plate material: stainless steel Weighing surface (W x D): 340 mm x 240 mm Service DAkkS certificate: 963-128 Display Height of digits: 1.800 cm Power supply Input voltage: 100 V - 240 V Charging time: 10 h Approximate working time: 40 h Working time (backlight off): 50 h Working time (backlight on): 25 h Possibility of use with batteries: yes Functions Percentage determination: yes Counting function: yes Conversion function: yes Formula function: yes Total net function: yes PRE-TARE function: yes Stable weighing (animal weighing programme): yes Lower weighing: Hook GLP protocol: yes Measuring system Weighing field [Max]: 16 kg Stabilisation interval: 3 s Readout [d]: 100 mg Linearity: 300 mg Weight recommended for adjustment: 10000 g (F1); 5000 g (F1) Adjustment possibilites: Adjustment with external weight Reproducibility: 100 mg Resolution: 160 Weighing system: Strain gauge Warm up time: 2 h Weighing units: ct dwt g gn kg lb mo oz t tl (Cn) tl (HK) tl (Singap. Malays) tl (Tw) to Environmental conditions Maximum humidity: 80 % Minimum temperature: 10 °C Maximum operating temperature: 40 °C Packing Packing dimesions (W x D x H): 470 mm x 470 mm x 190 mm Gross weight: 7.600 kg Net weight: 6.500 kg Counting Minimum partial weight for piece counter: 100 mg Counting resolution: 160000   627-FKB-16K01 (16000 g): Design Housing dimensions (W x D x H): 350 mm x 390 mm x 120 mm Material of weighing plate: stainless steel Weighing surface (W x D): 340 mm x 240 mm Bubble level: yes Adjustable swiveling legs: yes Service DAkkS certificate: 963-128 Display Height of digits: 1.800 cm Power supply Input voltage: 100 V - 240 V Charging time: 10 h Approximate working time: 40 h Working time (backlight off): 50 h Working time (backlight on): 25 h Possibility of use with batteries: yes Functions Percentage determination: yes Counting function: yes Conversion function: yes Formula function: yes Total net function: yes PRE-TARE function: yes Stable weighing (animal weighing programme): yes Lower weighing: Hook GLP protocol: yes Measuring system Weighing field [Max]: 36 kg Stabilisation interval: 3 s Readout [d]: 100 mg Linearity: 500 mg Recommended weight for adjustment: 20000 g (E2); 10000 g (E2) Adjustment possibilities: Adjustment with external weight Reproducibility: 200 mg Resolution: 360 Weighing system: Strain gauge Warm up time: 2 h Weighing units: ct dwt g gn kg lb mo oz ozt t tl (Cn) tl (HK) tl (Singap. Malays) tl (Tw) to Environmental conditions Maximum humidity: 80 % Minimum temperature: 10 °C Maximum operating temperature: 40 °C Packing Packing dimesions (W x D x H): 470 mm x 470 mm x 190 mm Gross weight: 7.600 kg Net weight: 6.500 kg Counting Minimum partial weight for piece counter: 100 mg Counting resolution: 360000  

Description Series Thermostatic oil bath with digital readout and regulation of temperature and time. Unlike water baths, which only reach 100 ° C oil baths evenly heated samples to 200 º C. They can operate in continuous mode or programmed via a digital timer to work in specific time periods, from 1min up to 9 hrs and 59 min. An acoustic signal marks the end of the selected time period and also indicates overheating of the bath when the temperature thereof exceeds 5 º C at the selected temperature. The high accuracy sensor accuracy is ± 1 º C and is divided scale of 1 º C. They have drain hose. SPECIFICATIONS: Reference / Code 50602003 Model 602 / 3 Capacity 3 L Practical measures 18x18x32 cm External dimensions 32x23x17 cm Holes 1 Weight 4 kg

Description Series Thermostatic oil bath with digital readout and regulation of temperature and time. Unlike water baths, which only reach 100 ° C oil baths evenly heated samples to 200 º C. They can operate in continuous mode or programmed via a digital timer to work in specific time periods, from 1min up to 9 hrs and 59 min. An acoustic signal marks the end of the selected time period and also indicates overheating of the bath when the temperature thereof exceeds 5 º C at the selected temperature. The high accuracy sensor accuracy is ± 1 º C and is divided scale of 1 º C. They have drain hose. SPECIFICATIONS: Reference / Code 50602005 Model 602 / 5 Capacity 5 L Practical measures 33x18x14 cm External dimensions 47x23x19 cm Holes 2 Weight 7 kg

Description Multifunction vortex mixer 300-3000 rpm model 681/22. It allows a fast and effective mixture of substances thanks to its orbital vibrating motion. Features: Low and robust design. Legs with suction cup to warrant full adhesion. Backlit LCD display to monitor working parameters. Adjustable speed up to 3000 rpm (depending on the accessory used). Operation time can be set in seconds, minutes or hours. Continuous or touch operation mode. Technical data: Speed range: 300-3000 rpm (depending on accessory). Shaking motion: orbital (4.5 mm Ø). Shaking weight: maximum, 0.5 kg (with accessory). Timer. Seconds mode: 1 - 59 seconds. Minutes mode: 1 - 59:59 minutes. Hours mode: 1 - 24 hours. Continuous mode: continuous mode. LCD display. Operation room temperature: 5 - 40ºC. Operation room humidity: 80% RH. Operation altitude: maximum, 2000 meters. Protection degree IP21 (according to DIN EN 60529). Power supply: AC/DC adaptor 100-240V / 24V; 50-60 Hz. Dimensions: 21 x 15 x 6.5 cm. Weight: 2.5 kg. Accessories included: Type Vessels Continuous mode Touch mode Speed range (rpm) Standard Test tubes and small vessels. Diameter: up to 50 mm. Yes Yes 300-3000 Circular For the different foam accessories. No Yes 300-1300 For microplates For a microplate. No Yes 300-1300 Microdisk To insert in the circular accessory. No Yes 300-1300 For test tubes (1) It can be pierced depending on your needs. No Yes 300-1300 For test tubes (2) For 14 tubes ∅ 10 mm. No Yes 300-1300 For test tubes (3) For 6 tubes ∅ 12 mm. No Yes 300-1300 For test tubes (4) For 4 tubes ∅ 16 mm. No Yes 300-1300  

Description Tabletop centrifuge Multibas+ with swing rotor and great capacity. Specially designed to be used in fields such as medicine, biology, veterinary, chemistry, genetic engineering or immunology. Features: High durability. Precise control of centrifugation conditions (speed, time and RCF), thanks to its digital electronic circuit controlled by microprocessor. Maintenance-free induction motor. Backlit LCD display that facilitates setting and display of centrifugation parameters. Supplied with swing rotor compatible with different adaptors (not included, see section "optional accessories") for different types of tubes. Noise level: ≤ 65 dB. Alarm of centrifugation end or error detection. Airflow system to avoid overheating in the inner cuvette. Electronic lid opening (manual opening in case of network error). Robust and stable design that meets the necessary safety requirements: Casing made of high quality ABS plastic with steel base and legs with suction cups to ensure device stability. Stainless steel inner cuvette and steel safety chamber between the inner cuvette and the casing. Electromechanical lock system that avoids the lid opening during centrifugation and safety mechanism that prevents the machine from starting when lid is open. Protection system that stops centrifugation automatically when maximum speed is exceeded. Lid with metallic base and suspension mechanism. Observation hole. Probe to control microprocessor temperature. Technical data: Swing rotor. Maximum speed: 5000 rpm. Maximum RCF: 4980 xg. Timer: 1h 59' 59". Pulses function: yes. Acceleration ramp: 0-9 (< 35" from zero to maximum speed). Decceleration ramp: 0-9 (< 30" from maximum speed to zero). Programmes: 9. Noise level: ≤ 65 dB. Power supply: CA 230 V, 50-60 Hz, 10 A. Dimensions (DxWxH): 59 x 47 x 35 cm. Weight: 32 kg. Optional accessories (not included)*: Ref. 052-92751004: set of adaptors 24 x 15 mL for centrifuge 052-52751000. Ref. 052-92751005: set of adaptors 32 x 15 mL for centrifuge 052-52751000. Ref. 052-92751007: set of adaptors  48 x 7 mL for centrifuge 052-52751000. * They are all autoclavable.

Description Testsimplets ® Preteñidos slide Testsimplets ® are ready for use, which provide excellent differentiation of the cells contained in body fluids for examination under a microscope and for screening of urine cytology. Testsimplets enables rapid potential differential staining of urine sediment cancer cells, replacing the traditional staining methods to smears and time-consuming Pappenheim.The easy and clean, and the speed of standard stain colors allow Testsimplets functional use of the consultation and the hospital. Procedure The method of preparation of urine is similar to that used when preparing normal urinary sediment.1. Centrifuge urine at 3000 rpm for approx. 10 minutes.2. Carefully decant supernatant.3. Resuspend the pellet in 3 drops of saline.4. Place a drop of this suspension in the middle of the colored area of the slide and carefully place the coverslip on top of each included in the kit.5. After 5-10 minutes has already completed the process of staining.6. The preparation is now ready for consideration.The preparation is stable up to 5 hours at room temperature. Application Testsimplets is a rapid test in vitro diagnostics for affixing and displaying the differential blood picture under the microscope, being able to dispense with the preparation of a blood frontis Principle of test The test consists of a slide equipped with a colored layer. This layer consists of two colors: cresyl violet acetate and new methylene blue. The specific affinity of cellular structures with colors leads to different dyes that can establish a classification of cells. The intensity of color and proportion of mixed colors in the lining of the slide are constant and are standardized, thus obtain reliable staining. Content packaging 50 slides ready for use, equipped with a layer consisting of 2.1 mg / cm ² of cresyl violet acetate and 1.0 mg / cm ² of new methylene blue.The slides can be drawn from the case either by hand or with dispenser.50 coverslips (24 x 36 mm) free from dust Assessment Examine the preparation with an increase of × 100, then identify suspicious cells or cell configurations a × 200 or × 400 increases or oil immersion with an increase of × 1000.Because vital staining, the cells appear to its natural size, as compared with other methods, details such as the nuclear structure and membranes are clearly visible. Clinical Significance Testsimplets allows accurate differentiation and classification of structures and nuclear membranes, the network of chromatin and nucleoli and cytoplasmic structures.The urinary cytologic diagnosis is useful in:all forms of micro-and macroscopic hematuria.cystitis resistant to treatment.cistalgia.dysuria of unknown etiology.Patient follow-up after urothelial tumor operations.Early identification and monitoring of bladder cancer.The determination of the degree of malignancy is made in the same way as with conventional staining techniques. Product reference Ref 191,574

Description Falcon 40 Litres Autoclave Class S, with drying function. Wide range of use: suitable for packed / unpacked material, instruments, etc. Widely used in laboratories. Easy cleaning and maintenance. Made of stainless steel AISI 304. Fully automatic and easy to control, with automatic control of heating and sterilisation time. The entire sterilisation process is continuously monitored by a microprocessor control system. The sterilisation time begins when the pressure in the chamber (temperature) reaches the set point. Approvals CE - MDD, CE - PD Programmes: 4 programmes: Unpacked solid (118 °C and 22 minutes). Packed solid (118 °C, 30 minutes). Unpacked solid (134 °C and 4 minutes). Packed solid (134 °C and 15 minutes). Technical features: Manual water filling, with water tank. Pressure gauge for displaying temperature and pressure. Programme display by bright LEDS. Indicators for different phases, such as start, heating, sterilisation, drying and overheating. Adjustable sterilisation temperature from 118 °C to 134 ° C and sterilisation time from 4 to 60 minutes. Drying function with adjustable time 0-60 minutes. Security: Overpressure safety valve. Valve emergency venting. Protection for low water level and overheating. Overvoltage protection. Construction and measures: Chamber and door built in stainless steel AISI 304 Depth: 74 cm Width: 60 cm Height: 47 cm Weight: 66 kg Chamber diameter: 30 cm Chamber depth: 57 cm Chamber capacity: 40 litres Water tank capacity: 8400 cm3 Length of sterilisation container: 49 cm Width od sterilisation container: 19 cm Height of sterilisation container: 17 cm Packaging width: 70 cm Packing height: 57 cm Packing depth: 80 cm Power supply: 230V / 50 ~ 60Hz Power consumption: 2735 W / 12 Amp (2300 W heating - 435 W drying) Standards: EN 61010-1:2001 EN 61010-2-041:1996 EN 61326-1:2006 EN ISO 15223-1:2012 EN ISO 14971:2012 Accessories included: Heater cover and sterilisation metal box.

Description PN202 optimizes polishing system thanks to its ample working tool, which allows the brace polishing all in one go. Ortotec polished engine integrates external inputs for an optional suction polisher desktop. Available with ¾ c.v. Technical data: Left side of motor with extendable handle of 100 x 90 mm. Right side of motor with automatic accessory holder. Noise level 50 DB Electric power 230 V.50/60Hz Absorbed power 2 A. Net weight 18 Kg.

Description UNIT VACUPRES vacuum pressing. FEATURES: Vacupres combines a pressing plate, a control panel and a vacuum pump. Available in two versions, with or without external vacuum outlets. Presenting ​​a maintenance-free vacuum pump, which provides optimum vacuum levels for any application.Plate is pressed with latex membrane and Unifix closure system without anchors.The outer vacuum outlets, allow the brace molded directly onto the patient's foot or the connection of an additional Tecnoprint unit with foot pedal control. TECHNICAL Molded on positive plaster or polyurethane resin.

Description Autoclave POLEAX EC 10 litres. Description: The "Poleax" series is designed for high performance, reliability, safety and easy use. Wide use range: suitable for packed / unpacked material, liquids, etc. Widely used in laboratories. Easy maintenance: made of stainless steel AISI 304, easy to clean and maintain. Fully automatic and easy to control, automatic control of heating and sterilisation time. The entire sterilisation process is continuously monitored by a microprocessor, the sterilisation time begins when the chamber pressure (temperature) reaches the set point. MARK CE – EMC, LVD, CE – MDD Programmes: 3 programmes : Solid unpacked (122 ºC and 18 minutes) Solid packed (122 ºC and 33 minutes) Liquid (122 ºC and 33 minutes) On the liquid programme, do not depressurise the chamber by hand, let it lose pressure progressively Technical characteristics: Manual water filling Manometer for the display of temperature and pressure Programme display by led indicators Indicators for start, heating, sterilisaton and complete sterilisation Sterilisation time can be set between 18 and 33 minutes. Sterilisation temperature 122ºC (1.4 Kg/cm2) Drying function not available Security: Security valve for overpressure Emergency valve for gas Overheat protection switch Surge protector Safety lock Construction and size: The chamber and the door are made of stainless steel AISI 304 Depth: 56 cm / 21.8 inch Width: 29.5 cm / 11.5 inch Height: 36 cm / 14 inch Weight: 12.5 kg / 27 lb Diameter of the chamber : 20 cm / 7.8inch Depth of the chamber : 31 cm / 12.1inch Capacity of the chamber: 10 litres Useful height of the chamber, from tray: 13.5 cm / 5.3 inch Tray length: 28 cm / 10.9 inch Tray width: 17 cm / 6.6 inch Sterilisation container length: 27 cm / 10.5 inch Sterilisation container width: 15 cm Sterilisation container height : 10 cm / 3.9inch Packing width: 39 cm Packing height: 40 cm Packing depth: 57 cm Power supply: 230v / 50~60Hz Electricity consumption: 800 W Standards: EN 61010-1:2001 EN 61010-2-041:1996 EN 61326-1:2006 EN ISO 15223-1:2012 EN ISO 14971:2012 Accessories included: Tray Metal sterilisation container

Description Monocular biological microscope Specifications Model 520-M-100FL: Monocular Biological Microscope 400x to 1600x can be increased to incorporate the eyepiece 16x and 100x objective additional (not included in standard equipment).Head with ocular tube at 45 °, 360 ° rotating. Ocular WF10x/18, revolver rotating in both directions triple spring stop position of the targets.Achromatic objectives DIN 4x, 10x and 40x (telescopic). Coarse and fine focus on both sides of the instrument.Platina with clips. A.N. Capacitor 0.65 with iris diaphragm and filter holder. 230W/20W Incorporated lighting lamp and condensing lens above. Model 520-M-100FL-H: Same features of the model M-100FL, except the lighting is dichroic halogen lamp 12V/10W. Transformer included. Model 520-M-100FLed: Monocular biological microscope with the same features of the model M-100FL, except for the lighting made through three-LED (white light) with three long-lasting rechargeable batteries.It can be used normally while charging. Includes external battery charger.

Description Stereomicroscopes with fixed heads frontally inclined 45 °. Platina equipped with black and white disk contrast to sample clamps. In all models with transmitted light includes a frosted glass disc. All models with binocular head, have a system of regulation the interpupillary distance (between 51 and 75 mm). Compensation is adjustable diopter eyepiece tubes. Wide field eyepieces WF10x/20 mm. These models have wide 2x objective working distance (119 mm). The models with illumination for incident light or transmitted, have 12V/10W tungsten lamps. 230V/50Hz power supply. In all models, focus adjustment is by rack and pinion system with the use of knobs located on both sides of the bracket. Technical characteristics: Models "! Head Objective Illuminators 520-ST-50 Fijo - frontally inclined 45 ° Fixed-2x! Only incident 520-ST-50Led Fijo - frontally inclined 45 ° Fixed-2x! LED Optional accessories: Ref: 520-ST-001: Pair of Eye WF5x/22mm Ref: 520-ST-002: Pair of Eye WF10x/20mm Ref: 520-ST-003: Pair of Eye WF15x/15mm Ref: 520-ST-004: Pair of Eye WF20x/13mm Ref: 520-ST-005: Ocular micrometer WF10x/20 mm

Description Vertical autoclave. Capacity 50 litres. This autoclave provides sterilisation temperatures ranging from 118 ºC to 134 ºC / 244.4 ºF to 273.2 ºF.It is suitable for a wide range of applications: for wrapped goods, unwrapped goods and all kinds of instruments.Widely used in laboratories. Technical characteristics: Power: 2.8 Kw Capacity: 50 litres Material: stainless steel 304 Working pressure: 2.1 Kg/cm2 Working temperature: 118 °C - 134 °C / 244.4 ºF to 273.2  ºF Voltage: 220 V Type: vertical autoclave Stainless container Automatic sterilisation Manual water filling. Standards: CE-EMC.LVD, by TUV, CE-MDD approval by DNV, Chamber Designed By ASME / USA STANDARD Safety: Pressure control switch Safety valve Security system in the electrical circuit. Emergency exhaust switch. Pre-heating programme: Preheating by dry heat in order to maintain a balanced room temperature.  Dimensions: Chamber: 30 cm diameter x 71 cm deep / 11.7 x 27.7 in External dimensions: 60 x 100 x 45 cm / 23.4 x 39 x 17.5 in Standards: EN 61010-1:2001 EN 61010-2-041:1996 EN 61326-1:2006 EN ISO 15223-1:2012 EN ISO 14971:2012

Description: The rotary agitator is ideal for stir blood samples, viscous liquids or solids in suspension which requires minimal aeration and is also a powerful and quiet machine that can operate for several hours without control. It contains 7 rollers who are simultaneously rotate and balance movements achieving a combined effect of sine wave that provides a careful and thorough agitation of the tubes. Additionally, speed adjustable between 10 and 80 rpm and the possibility of various types of tubes shaken as to fit comfortably in the user's needs. SPECIFICATIONS: Reference 50683000 Speed Range 10-80 rpm Number rollers 7 Long rolls 240 mm Food 220 V / 50 Hz  

Description: Small magnetic stirrers with analog control heating and ideal for those places where little space is available due to their small size. Shake enable all kinds of solutions in which they can enter a stirring magnet, up to a maximum of 2 or 5 liters depending on the model. Its metal structure covered with epoxy resin is resistant to chemical attack while the hot plate is made of anodized aluminum resists corrosion. They present a side switch on / off and front control panel includes a knob for speed control, a knob for temperature control and two pilots operating and signaling power of the hotplate. The agitators also come equipped with heating with a practice rod to hold thermometers and pH probe is also provided with a Teflon coated magnet 9 mm ø and 28 mm long. SPECIFICATIONS: Reference 50690010 Model 690 / 1 Speed Range 100-2000 rpm Maximum temperature (board) 180 º C ± 10% Volume stirrable 50-2000 ml Plate dimensions 120x120 mm / 4.7x4.7 in Food 220 V / 50 Hz Dimensions (LxWxH) 200x120x90 mm / 7.8x4.7x3.5 in Weight 2 Kg  

Description Description: The rotary agitator is ideal for stirring blood samples, viscous liquids or solids in suspension which requires minimal aeration. It is also a powerful and quiet machine that can operate for several hours on it´s own. It contains 7 rollers which simultaneously rotate and balance movements achieving a combined effect of sine wave that provides a careful and thorough agitation of the tubes. Additionally, the speed is adjustable between 10 and 80 rpm and the possibility of various types of tubes shaken as to fit comfortably in the user's needs.   Reference 50683000 10-80 rpm speed range Roll Number 7 Long rolls 240 mm Power supply 220 V / 50 Hz Dimensions 400x250x100 mm Weight 4 Kg

Description Bolsillo.Serie Digital Balance 5043.Compact, rugged design. Precision.Backlit touch screen.Weighing functions, parts counting and tare.Size: 60x60 mmCapacity and sensitivity:052-55043210: 100g / 0.01 g052-55043220: 200g / 0.01 g052-55043250: 500g / 0.1 g NOTE: According to the current legislation in the field of “Non-automatic weighing instruments” in which the scales are included, by Order of December 22, 1994 (BOE 3/1/95), these scales cannot be used for: Business transactions. Calculations of rates, tariffs, taxes, salaries, compensations and other similar charges. Legal Experts Pharmaceutical preparation of ordered medicine, as well as analyses carried out in medical and pharmaceutical laboratories. Price or full amount determination in direct sales to the public and preparation of prepackaged items.

Description Pesa class F1/inox., 2 g (0.07 oz) material and laboratory equipment for laboratories, high-quality. Specifications: Reference Range / Tolerance 052-65021310 1g / 0.03 oz - Tolerance 0.10 mg 052-65021320 2g / 0.07 oz - 0.12 mg Tolerance 052-65021350 5g / 0.17 oz - 0.15 mg Tolerance 052-65021410 10g / 0.35 oz - 0.20 mg Tolerance 052-65021420 20g / 0.7 oz - 0.25 mg Tolerance 052-65021450 50g / 1.76 oz - 0.30 mg Tolerance 052-65021510 100g / 3.52 oz - 0.50 mg Tolerance 052-65021520 200g / 7 oz - Tolerance 1 mg 052-65021550 500g / 17.6 oz - 2.5 mg Tolerance 052-65021610 1kg / 2.2 lb - Tolerance 5 mg 052-65021620 2kg / 4.4 lb - Tolerance 10 mg 052-65021650 5kg / 11 lb - Tolerance 25 mg 052-65021710 10kg / 22 lb - Tolerance 50 mg 052-65021720 20kg / 44 lb - tolerance 100 mg

Description Thermostatic baths with digital selection of ambient temperature from 5 º C to 100 ° C include a high accuracy sensor accuracy ± 1 º C and a scale of 1 C. They can operate in continuous mode or programmed via a digital timer to work in specific time periods, from 1 min. until 9 h 59 min. They have screens for temperature and weather, waterproof membrane keyboard and drain hose, which can be cleaned easily. SPECIFICATIONS: Reference 50601012 Model 601/12 Capacity 12 L Consumption 1000 W Practical measures 32x32x12 cm External dimensions 42x36x17 cm Holes 4 Weight 10 kg

Description Thermostatic baths with digital selection of ambient temperature from 5 º C to 100 ° C include a high accuracy sensor accuracy ± 1 º C and a scale of 1 C. They can operate in continuous mode or programmed via a digital timer to work in specific time periods, from 1 min. until 9 h 59 min. They have screens for temperature and weather, waterproof membrane keyboard and drain hose, which can be cleaned easily. SPECIFICATIONS: Reference 50601003 Model 601 / 3 Capacity 3 L Consumption 300 W Practical measures 17x17x12 cm External dimensions 30x20x20 cm Holes 1 Weight 4 kg

Description Thermostatic baths with digital selection of ambient temperature from 5 º C to 100 ° C include a high accuracy sensor accuracy ± 1 º C and a scale of 1 C. They can operate in continuous mode or programmed via a digital timer to work in specific time periods, from 1 min. until 9 h 59 min. They have screens for temperature and weather, waterproof membrane keyboard and drain hose, which can be cleaned easily. SPECIFICATIONS: Reference 50601005 Model 601 / 5 Capacity 6 L Consumption 500 W Practical measures 32x17x12 cm External dimensions 42x21x17 cm Holes 2 Weight 7 kg

Description Thermostatic baths with digital selection of ambient temperature from 5 º C to 100 ° C include a high accuracy sensor accuracy ± 1 º C and a scale of 1 C. They can operate in continuous mode or programmed via a digital timer to work in specific time periods, from 1 min. until 9 h 59 min. They have screens for temperature and weather, waterproof membrane keyboard and drain hose, which can be cleaned easily. SPECIFICATIONS: Reference 50601005 Model 601 / 5 Capacity 6 L Consumption 500 W Practical measures 32x17x12 cm External dimensions 42x21x17 cm Holes 2 Weight 7 kg

Description Digital centrifuge with a compact and functional design and a with a very low vibration and noise level thanks to its elastic suspension. The motor switches off automatically when the lid is open. This unit includes a maintenance-free induction motor, 99 minute timer control, speed control, power indicator lamp and blue, transparent methacrylate lid. With start button and eight aluminium racks for 16 x 100 mm tubes. The 052-52698005 model differs in capacity, as it contains 16 tubes 12 x 75 mm (5 ml). Features:   Reference 052-52698000 Capacity 8 x 15 ml Maximum RCF 2000 g Timer 0 - 99 min Speed ​​ 4000 rpm Dimensions 320 x 320 x 280 mm Power 150 w Weight 15 kg

Description Spectrophotometer advanced optical performance and precise, its design ensures great stability and durability. Their detector (aligned with great accuracy) and the high quality of deuterium and halogen lamps increase the accuracy of the equipment throughout the spectral range covered. FEATURES: Alphanumeric keypad solvent-resistant seal. Deuterium lamp pre-aligned to facilitate change, the use and status of the lamps can be monitored. Includes sophisticated software tools (Windows ®). Ability to print graphics and tables of results in A4. Includes clock with date and time printable results. SPECIFICATIONS:    Reference 54255050  Model 4255  Long range. Wave 190-1100 nm  Bandwidth 2 nm  Optical-system! Single beam, grating 1200 lines / mm  Accuracy long. Wave ± 0.5 nm  Reproducibility long. Wave 0.3 nm  Sweep-Speed! High | Medium | Low, max. 3000 nm / min  Photometric range -0.3 To 3 A, 0 to 200% T; 0-9999 C  Photometric Accuracy ± 0.3% T  Photometric reproducibility ± 0.2% T  Diffuse-light! 0.05% T  Stability ± 0.002 A / h  Screen LCD (320x240 bits) or PC model  Consistency ± 0.002 A (200-1000 nm)  Lighting Source * Tungsten and deuterium lamps  -Detector! Silicon photodiode  Sub-samples! Buckets of 100 mm light path  Output USB and parallel ports (printer)  Food AC 220 V / 50 Hz  Dimensions 480x360x160 mm  Weight 16 Kg