All Food & agro machinery, equipment suppliers from Ukraine

LLC Artmash offers an exact loading screw with a mixer of its own production. This is a new development of our factory, created especially for those who are not able to buy an accurate feed screw and mixer separately, or cannot place them in one room. Buying a screw + mixer you get the same performance and save 35 500 hryvnia. The product is designed for use in the production lines of feed pellets and fuel pellets. The auger is not afraid of debris entering the pellet raw materials, provides high line productivity up to 3 t / h. The screw model with engine speed control is equipped with a worm gear. The mixer allows you to prepare a homogeneous mixture (96%) of feed, dietary supplements, premix, vitamins. Mixing occurs within 6 minutes; continuous operation is possible. Unloading of processed raw materials is carried out at the end, which allows you to use a metered feed screw in the kit, after which it can be sent for granulation. The feed mixer is controlled by 1 operator. A horizontal mixer will help saturate the feed with useful additives, balance the diet of animals, and ensure the growth of healthy livestock and poultry. Video with reviews of our customers Characteristics of the auger of the exact loading with a mixer Voltage: 380 V Dimensions: H2800hSh750hD1600 mm Weight: 200 kg Productivity: up to 3000 kg / h Feed Auger Motor Power: 0.55 kW Mixer motor power: 2.2 kW Hopper volume: 0.6 cubic meters

The manufacturer of agricultural equipment LLC Artmash offers a horizontal feed mixer with two counter belt mixers. Allows you to prepare a homogeneous mixture (96%) of feed, dietary supplements, premix, vitamins. Mixing occurs within 6 minutes; continuous operation is possible. Unloading of processed raw materials is carried out at the end, which allows the use of a dosed feed screw in the kit, after which it can be sent for granulation. The feed mixer is controlled by 1 operator. A horizontal mixer will help saturate the feed with useful additives, balance the diet of animals, and ensure the growth of healthy livestock and poultry. Video with reviews of our customers Characteristics of the horizontal mixer for the production of animal feed: Motor: 4 kW; Hopper volume: 0.6 cubic meters; Productivity: 1 ton per hour; Weight: 280 kg. Dimensions: LxWxH 1702 * 750 * 1900 m.

LLC "Artmash" is a manufacturer of lines for the production of pellets from animal feed of any composition for Ukraine and 20 other countries. At the request of the client, we can offer equipment of different capacities, we provide the most reliable information about the possibility of granulation of a particular raw material as well as possible performance. The standard line includes: Accurate loading auger 380V, 1.1 kW, 1500 rpm. Granulator 380V, 22 kW, 1500 rpm. Pellet cooler with vibrating table 380V, 5.5 kW, Video with reviews of our customers Before painting and selling all our equipment is tested for defects and their subsequent elimination. All nodes are made in-house with an inspection of quality control. Parts that are subjected to heavy loads are made of alloy steels, followed by heat treatment. Contact us and we will help you choose the equipment of the necessary power and performance.

The Artmash plant offers you a counter-current pellet cooler of its own production. The cooling column is designed to cool the granules coming from the granulator. The equipment is a countercurrent type cooling column. This means that air passes through the entire layer of granules, while simultaneously relieving them of excess moisture. Due to the passage of the granules through the cooling column, their temperature decreases from 70-90 degrees Celsius (at the exit of the granulator) to 15-20 degrees. Video with reviews of our customers Contents of delivery: cooling column with vibrating table; anti-dust blower fan; fan suction dust; control cabinet; scraper conveyor. The main parameters of the pellet cooler: Voltage: 380 V; Assembly Length: 4000 mm; Width: 1100 mm; Height: 2500 mm; Weight: 550 kg; Hopper loading volume: 1 cube m; Total engine power (4 pcs.): 3.85 kW; Productivity: up to 1000 kg / hour.

LLC Artmash offers you a feed granulator 380 V, 11 kW of its own production. Main advantages of our universal granulator: the matrix (die) is made of steel 20X with subsequent cementation in a thermal furnace. The hardness of the surface layer of the metal, as well as the walls of the hole 62 HRC (bearing hardness) is achieved, which ensures wear resistance for years of operation of the granulator; rollers are made in the same way as the matrix; the mechanism used involute helical gear transmission. Compared to spur gears, helical gear achieves a significantly lower noise level of the product, as well as greater transmission durability; in order to avoid engine overload, we have provided a thermal relay, which will timely turn off the engine in case of overheating; each granulator is tested for defects and repaired before painting and selling; All nodes are made in-house with a check of quality control. parts that are subjected to heavy loads are made of alloy steels, followed by heat treatment. Video with reviews of our customers Characteristics of a feed granulator 380 V, 11 kW: Voltage: 380 V; Engine power: 11 kW, 1500 rpm; Productivity: grain feed 150-200 kg / h, straw 100 kg / h, sunflower husk 150-200 kg / h; Granule diameter: 2-8 mm; Diameter of the matrix: 200; Granulator weight: 230 kg; Dimensions: D1050 * W400 * H1000 mm.

LLC Artmash offers you a pellet granulator 380 V, 11 kW of its own production. Main advantages of our universal granulator: the matrix (die) is made of 18KhGT steel followed by cementation in a thermal furnace. The hardness of the surface layer of the metal and the walls of the hole 62 HRC (bearing hardness) is achieved, which provides wear resistance for years of operation of the granulator; rollers are made in the same way as the matrix; the mechanism used involute helical gear transmission. Compared to spur gears, helical gear achieves a significantly lower noise level of the product as well as greater transmission durability; in order to avoid engine overload, we have provided a thermal relay, which will timely turn off the engine in case of overheating; each granulator is tested for defects and repaired before painting and selling; All nodes are made in-house with a check of quality control. parts that are subjected to heavy loads are made of alloy steels, followed by heat treatment. Video with reviews of our customers Characteristics of the pellet pellet 380 V, 11 kW: Voltage: 380 V; Engine power: 11 kW, 1500 rpm; Productivity: 200-300 kg / hour; Granule diameter: 6-8 mm; Diameter of the matrix: 200; Granulator weight: 230 kg; Dimensions: D1050 * W400 * H1000 mm.

The manufacturer of agricultural equipment LLC "Artmash" offers a hay shredder 380 V, 18.5 kW with or without a cyclone. The model is intended for industrial enterprises, characterized by increased productivity. Functions: processing of herbs (reeds, straw, alfalfa, hay); preparation of feed mixtures; bedding for animals; production of briquettes and fuel pellets. All nodes are made in-house with an inspection of quality control. Parts that are subjected to heavy loads are made of alloy steels, followed by heat treatment. Video with reviews of our customers Hay shredder 380 V, 18.5 kW Main parameters: Voltage: 380 V; Engine power: 18.5 kW, 3000 rpm; Productivity: 800-1000 kg / h; Mesh diameter: 6 or 8 mm; Weight: 250 kg; Dimensions: H1450 * D1000 * W1050 mm.

The manufacturer of agricultural equipment LLC Artmash offers a grain chopper 380 V, 15 kV with a cyclone and vacuum cleaner. The ARTMASH 311-2 model is intended for industrial enterprises, it allows to process a large amount of feed per unit time. A vacuum cleaner for grain saves workers, and a cyclone ensures the purity of the finished product. All nodes are made in-house with an inspection of quality control. Parts that are subjected to heavy loads are made of alloy steels, followed by heat treatment. Video with reviews of our customers Grinder for grain 380 V, 15 kW with a cyclone and a vacuum cleaner "ARTMASH 311-2" Main parameters: Voltage: 380 V; Engine power: 15 kW, 3000 rpm; Productivity: 1000-1500 kg / h; Mesh diameter: 4 or 6 mm; Weight: 180 kg; Dimensions: V2200 * D2000 * W1500 mm.

Designed for unloading eight- and fifteen-ton auto-carriers. The compressor is installed instead of the rotary vane, in comparison with which it has a number of advantages: increased reliability and long service life, provided structurally due to the absence of friction surfaces in the working chamber; there is no need to use a filter and an oil separator, since there is no lubrication in the flow part of the compressor; the unloading time of an eight-ton auto-carrier is no more than 20 minutes, fifteen-ton - 40 minutes. NAME OF PARAMETERS \ MODEL COMPRESSOR GEAR 3AF51K55T Final working pressure, kgf / cm2 1,1 Productivity under suction conditions, m3 / min 4,5 Power consumption at working pressure, kW 14,8 Oil consumption for ablation, g / h 0,45 Compressor shaft rotation frequency, rpm 2700 Air temperature at the compressor outlet, ° С 145 Weight, kg 652 Overall dimensions (length x width x height), mm 1330 x 655 x 940

Rotary compressors and gas blowers are used in aeration systems of fish ponds, potable water storage tanks as well as aeration systems in the sludge pools of treatment facilities, when spraying gardens and crops, in foundries. Aeration is a process of forced saturation of water with air, or oxygen. To ensure this process, a low-pressure compressor or blowers for aeration are used, and its purpose is: Aeration is the process of forced saturation of water with air, or oxygen. To ensure this process, a low-pressure compressor or aeration blowers are used, and its purpose is: Oxidation of iron compounds (water deferrization) and manganese, which consists in the oxidation of iron and manganese compounds with oxygen. As a result, these compounds precipitate in the form of flakes, which are retained by a special filling sediment filter. Removal of dissolved gases, including toxic ones, for example, hydrogen sulfide and methane. Disinfection of water as a result of the destruction of organic substances contained in it, under the influence of oxygen. Removing bio-pollution: when oxygen is saturated with water, the number of beneficial aerobic bacteria that process biomass into carbon dioxide and methane-biogas increases. Now the bio-treatment process is used at all large treatment facilities in Russia. The resulting biogas can also be pumped out of the tanks of treatment plants using blowers for further use, for example, for the production of electricity or fuel for vehicles. However, in Russia this practice is not yet common. Maintaining the pond ecosystem by saturating the water with oxygen. In stagnant water under the influence of sunlight, anaerobic bacteria begin to multiply actively. As a result, the reservoir turns into a muddy swamp with an unpleasant odor. Also, due to insufficient oxygen concentration in the water, pestilence of fish and other beneficial organisms occurs.

MVT36-2-0 Designed for cooling a liquid coolant in air conditioning systems, cooling systems for milk, soft drinks, beer, sparkling wines, oils using an intermediate coolant. It is used on dairy farms, food industry enterprises, in air conditioning systems.

It has a V-shaped design, is able to switch to two modes of operation on R-12 freon. The first allows you to issue cooling capacity of 14.9 kW, spending 5.0 kW. The second mode allows lower rates: 10.5 kW in the cold and 3.4 kW of energy consumption. The FV6 compressor and the FU 12 compressor are one of the most popular models in their segment. They are installed in powerful refrigeration units and units that are used in the Navy, in the metallurgical, mining, chemical, energy industries and special purpose facilities. Spare parts and the complete assembly of the FV 6 Freon compressor can be bought at manufacturer prices from the official distributor of the Refma factory in Belgorod. To contact managers, fill out the contact form, call the above phone numbers or send an e-mail to the company. The FU12 compressor is one of the main elements of the refrigeration unit and serves to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to condensation pressure. Designed to work as part of automated stationary and transport refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL COOLING COMPRESSOR ФУ12 Compressor type Freon compressor, piston, V-shaped, single-stage, cross-axle with external drive. MODE 1 Cooling capacity, kW (kcal / h) 14.9 (12800) Effective power, kW 5.0 Volume described by pistons, m3 / h 62.0 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). MODE 2 Cooling capacity, kW (kcal / h) 10.5 (9000) Power consumption, kW 3.4 Volume described by pistons, m3 / h 41.4 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 16 s-1 (960) (rpm). Cylinder diameter, mm 67.5 Piston stroke, mm 50 Number of cylinders, pcs 4 Freon refrigerant 12 Brand of used oil ХФ12-16 (for R-12) Amount of refilled oil, kg 2.5 ± 5% Weight, kg 90 Overall dimensions (length x width x height), mm 484 x 530 x 426

Compressor FV6. It has an external drive and operates in 3 modes. The first uses R-12 freon. The device is capable of achieving 7.5 kW of cooling capacity, while consuming no more than 2.5 kW of energy. The second mode also includes operation on R-12 freon, but the compressor produces up to 5.35 kW, spending 1.7 kW of energy. The third mode is activated when refueling with R-22. This makes it possible to generate 11.05 kW of cooling capacity, using 4.2 kW of electricity. The FV6 compressor is one of the main elements of the refrigeration unit and serves to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to condensation pressure. Designed to work as part of automated stationary and transport refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL REFRIGERATING COMPRESSOR ФВ6 Compressor type Freon compressor, piston, vertical, single-stage, cross-axle with external drive. MODE 1 Cooling capacity, kW (kcal / h) 7.5 (6500) Effective power, kW 2.5 Volume described by pistons, m3 / h 31.0 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). MODE 2 Cooling capacity, kW (kcal / h) 5.35 (4600) Power consumption, kW 1.7 Volume described by pistons, m3 / h 20.7 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 16 s-1 (960) (rpm). MODE 3 Cooling capacity, kW (kcal / h) 11.05 (9600) Power consumption, kW 4.2 Volume described by pistons, m3 / h 31.0 Cooling capacity and effective power are specified in the mode, ° С during operation on R-22 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). Cylinder diameter, mm 67.5 Piston stroke, mm 50 Number of cylinders, pcs 2 Refrigerant R12 or R22 Brand of used oil ХФ12-16 (for R-12) or ХФ22с-16 (for R-22) Amount of refilled oil, kg 1 , 7 ± 5% Weight, kg 50 Overall dimensions (length x width x height), mm 368 x 324 x 392

The compressor 2FVBS4 / II OM4 is one of the main elements of the refrigeration unit and is used to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to a condensing pressure. Designed to work as part of automated ship refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL REFRIGERATING COMPRESSOR 2FVBS4 / II OM4 Compressor type freon compressor vertical, piston, single-stage, bezreztskopfny glandless. Cooling capacity, kW (kcal / h) 5.2 (4500) Power consumption, kW 2.2 Volume described by pistons, m3 / h 20.6 Cooling capacity and effective power are indicated in the mode, ° C when working on R-12 in the mode: boiling point minus 15 ° С, condensation temperature 30 ° С, suction vapor temperature 20 ° С liquid temperature in front of the throttle device 25 ° С Type of built-in electric motor АПВ2-41-6Ф Electric motor power, kW 2,1 Supply voltage, V 380 Rod alternating current, 3-phase Current frequency, Hz 50 Diameter of cylinder, mm 67.5 mm Ho d piston, mm 50 mm Number of cylinders, pcs 2 Synchronous speed, s-1 (r / min) 16.7 (1000) Volume described by pistons, m3 / h 20.6 Refrigerant R-12 Brand of used oil ХФ12- 16 Amount of refilled oil, kg 2.5 ± 5% Weight (dry) of the compressor, kg 130 Overall dimensions (length x width x height), mm 595 x 370 x 455

Designed to work as part of refrigerators for cooling air or liquid refrigerants with condensers of water or air cooling. Units consist of a compressor, receiver, filter - dryer, instrument panel, pressure gauge shield, connecting piping mounted on the frame. NAME OF PARAMETERS \ MODEL REFRIGERATING UNIT AKP14-15 Cooling capacity, kW * 16.9 Power consumption, kW 5.8 Receiver capacity, l 15 Temperature for nominal operation, ° С To = minus 15 ° С Тk = plus 30 ° С Rated refrigerant R22 freon mode Units are also operable with R12, R502 freon agents. The range of units in other modes is boiling point, ° С - from 10 to minus 40; condensation temperature, ° С - up to 50; ambient temperature, ° C - from 5 to 40; water temperature for cooling the condenser, ° С - up to 33.

Designed to supply air, not containing droplet liquid and mechanical impurities, into the pneumatic system for transporting grain, products of its grinding and other bulk solids. It is applied: at combines of bakery products; in mills, elevators; in feed mills. The compressor can be operated in explosive rooms with a dangerous concentration of dust at an ambient temperature ranging from -10 ° C to + 35 ° C. The compressor consists of a compressor unit, a safety valve and an electric motor located on a common base, which is also a silencer. NAME OF PARAMETERS \ MODEL COMPRESSOR GEAR 3AF49K52С Pressure difference, kPa 40 Productivity, m3 / min 1,54 Power el. engine, kW 2.2 Weight, kg 253 Overall dimensions (length x width x height), mm 1360 x 450 x 780

LLC Artmash offers an accurate loading auger of its own production with an increased hopper. The product is designed for use in the production lines of feed pellets and fuel pellets. The auger is not afraid of debris entering the pellet raw materials, provides high line productivity up to 3 t / h. The screw model with engine speed control is equipped with a worm gear. Video with reviews of our customers Characteristics of auger accurate loading: Voltage: 380 V Engine power: 1,1 kW + 0,55 kW Productivity: up to 5000 kg / h Weight: 210 kg Hopper volume: 1.3 cubic meters Dimensions: 2750 * 1150 * 1850 mm

Stainless steel tank for oil storage buy with delivery to the customer The oil tank is made of AISI 304 steel, horizontal, with conical flanged bottoms, on supports, two washing heads and a level gauge are installed in the tank. KRAPT company manufactures equipment for various industries - tanks, tanks, reservoirs. Visit our page

To buy a container for storing wine from the manufacturer of the KRAPT company. The container is made of stainless steel, steel is marlized. The tank is made of AISI 304 steel, vertical, installed on a concrete foundation. The tank is supplied to Georgia in disassembled form, installation on site. Visit our page

We produce containers from AISI 304 steel for winemaking of various sizes. Stainless steel tanks can be horizontal or vertical, on supports or without supports, with mixing devices Delivery to Georgia Visit our page

We produce stainless steel containers for the food industry. Tanks are made from various grades of steel with a volume of 100 liters or more, on order Delivery to Georgia Visit our page

Scales for automobiles, wagon, for a warehouse, for weighing animals