Construction Materials in bulk on Qoovee

Manufactured from cement, lime, silica sand and aluminum paste, our AAC insulation board is autoclave-cured to form millions of micro-air cells, giving density 350-550 kg/m³, thermal conductivity ≤0.11 W/(m·K) and 4-hour fire rating (≥200 mm). Panel is non-combustible, produces no toxic smoke, and withstands continuous exposure to 1000 °C without deformation. Standard size 600 × 200 mm, thickness 50-300 mm, tongue-and-groove edges for fast thin-joint installation. Ideal for exterior walls, roof decks and cold-store envelopes seeking lightweight, energy-saving and fire-safe solutions. Certified GB/T 11969, EN 13501-1. FOB Kashgar, 13-day delivery to Almaty. Contact +86-135-0000-0000 for samples and MOQ.

Made from melted basalt & dolomite spun into mineral fibers, our inorganic insulation board contains zero organic binders, delivering A1 fire-rating and ≤50 °C smoke temperature. Density 80-200 kg/m³, thermal conductivity ≤0.040 W/(m·K), working temperature -50 °C to +650 °C; 1200 × 600 mm standard size, 30-150 mm thick, custom cut available. Panel is water-repellent, non-corrosive to aluminum or steel, and does not emit toxic gases when exposed to flame. Ideal for aluminum-panel curtain walls, ventilated façades, roof decks and cold-storage envelopes. Certified CE, GB/T 5480, EN 13501-1. FOB Kashgar, 13-day delivery to Almaty.

Closed-cell expanded perlite + silicate binder, rigid board.Density 180-220 kg/m³, thickness 20-100 mm, 1200×600 mm.Thermal conductivity ≤0.055 W/m·K, A1 non-combustible.Tongue-and-groove edge, high strength ≥0.3 MPa.For external wall, roof, floor, fire-rated insulation.PE strap pack, 40 pcs/pallet, 20 ft HQ ≈ 2 200 m².

Closed-cell elastomeric NBR/PVC foam, flexible, skin smooth.λ≤0.034 W/m·K, B1 fire, -50 °C~+105 °C, built-in vapor barrier.Thickness 1-30 mm, width 1-2 m, roll 8-30 m or sheet 2 m×1 m.For HVAC pipes, ducts, chillers, anti-condensation.PE packed, 20 rolls/pallet, 40 ft HQ ≈ 4 000 m², size & color OEM.

Graphite-enhanced EPS, closed-cell, silver-gray color, λ≤0.032 W/m·K.Density 18-35 kg/m³, thickness 20-200 mm, tongue-and-groove edge.B1 fire rating, -50 °C~+70 °C, stable thermal performance.Lightweight, easy to cut, high compressive strength ≥100 kPa.For external wall, roof, floor, cold-storage insulation.PE bag pack, 40 pcs/bundle, 20 ft HQ ≈ 3 800 m².

Organic PU core closed-cell λ≤0.023 W/m·K, 28–40 kg/m³.Both sides 5 mm fiber cement board, A2 fire, impact resistant.Total thickness 30/40/50 mm, tongue-and-groove, 1220×2440 mm.Lightweight, high strength, waterproof, no extra cladding needed.For external wall, roof, cold-store, high-rise fire-safe insulation.PE+carton pack, 40 pcs/pallet, 20 ft HQ ≈ 1 100 m².

Closed-cell PVC foam board, smooth surface, λ≤0.032 W/m·K.Density 28-45 kg/m³, thickness 3-30 mm, 1220×2440 mm standard.B1 fire rating, waterproof, -30 °C~+80 °C, no rot.Lightweight, easy to cut, nail, glue; high compressive ≥200 kPa.For wall/roof insulation, cold-store, furniture core, signage.PE film pack, 50 sheets/pallet, 20 ft HQ ≈ 1 200 pcs.

Closed-cell phenolic foam, double-sided aluminum foil, λ≤0.020 W/m·K.Density 35-65 kg/m³, thickness 20-150 mm, tongue-and-groove edge.B1 fire rating, -180 °C~+120 °C, low smoke & non-toxic.Compressive strength ≥150 kPa, lightweight, easy to cut.For HVAC duct, external wall, roof, cold-storage insulation.Packed in PE, 40 pcs/bundle, 20 ft HQ ≈ 2 900 m².

Closed-cell polyurethane rigid foam, double-sided kraft or AL foil.Density 40-60 kg/m³, thickness 20-150 mm, tongue-and-groove edge.Thermal conductivity ≤0.022 W/m·K, B2 fire rating, -50 °C~+120 °C.Lightweight, high compressive strength ≥150 kPa.For external wall, roof, cold-storage, HVAC duct insulation.Packed in PE, 40 pcs/bundle, 20 ft HQ ≈ 2 800 m².

Expanded polystyrene, closed-cell, λ≤0.037 W/m·K.1180×600 mm sheet, 20-120 kg/m³, 20-200 mm thick.B1 fire class, tongue-and-groove edge, lightweight cut.Exterior wall, roof, under-floor, cold-store insulation.Packed in PE bag, 40 pcs/bundle, 20 ft HQ ≈ 3 800 m².

630 g/m² PVC+polyester, double-coated, ≥2 000 mm H₂O.Fire-retardant B1, anti-mildew, -30 °C to +70 °C.1.5/2/2.5/3 m width, 50 m roll, heat-sealed seams.Truck tarp, construction cover, outdoor tent, sun-shade.MOQ 1 000 m, color/logo/eyelet spacing customizable.

Rigid PVC nose + alkali-resistant mesh wings, 150-200 g/m².Protects and straightens external wall corners, prevents chipping.Sizes: 2×2 cm, 2.5×2.5 cm, 3×3 cm; length 2 m or 3 m.Simply press into base coat before render—no rust, no crack.100 pcs/ctn, MOQ 5 000 m, OEM color & label available.

Glass fiber mesh, acrylic coating, ≥20% alkali-resistance after 28 d.5×5 mm weave, 75-160 g/m², tensile ≥1 500 N/50 mm.1 m × 50 m roll, orange/blue/white or OEM color.Embed in base coat for EIFS, stucco, tile backer—stops cracks.MOQ 2 000 m², pallet + shrink wrap, 40 ft HQ ≈ 90 000 m².

Grade-A fire performance significantly enhances the building’s fire rating. The panel is non-combustible, produces no smoke or toxic gases, and will not rupture; even when exposed to temperatures above 100 °C for over an hour, the wall remains intact.

Polymer-emulsion crack inhibitor pre-blended with cement & graded sand.Flexible skin coat, stops micro-cracks, good for first under-layer before tile or render.25 kg bag, indoor/outdoor, apply 2-3 mm thick.

CPVC electrical conduits provide a reliable and durable solution for routing electrical cables. They ensure safe and convenient wiring in residential, commercial, and industrial settings.   Material: CPVC (Chlorinated Polyvinyl Chloride), strong and heat-resistantSizes: customizable according to client’s preferenceApplications: protection of electrical cables, wiring installations indoors and outdoorsAdvantages: high strength, fire resistance, corrosion and chemical resistance, easy installation

PVC drainage pipes are a reliable and durable solution for draining rainwater and wastewater. Ideal for residential, commercial, and industrial applications. Material: PVC (polyvinyl chloride), strong and environmentally safeSizes: customizable according to client’s preferenceApplications: drainage systems, water diversion, garden and industrial areasAdvantages: easy installation, high strength, resistant to corrosion and temperature fluctuations

Bonding mortar, polymer-modifiedNon-slip, 30 min open time3.5 kg/m², 20 kg bagWall & floor, inside/outsideOEM label, 48 bags MOQ

Lightweight, A1-fire-rated panel for 700 °C max.Low λ≤0.048 W/m·K, cut by knife. 600×300 mm, 20-100 mm thick. Ideal for ducts, tanks, roofs. 13-day rail to Central Asia.

Aluminum Silicate Needle-punched BlanketMade from high-purity aluminum silicate, this blanket is produced by a resistance-furnace melt-spinning process and then mechanically needled into a uniform mat. It offers excellent tensibility and vibration resistance, remains bright-white and dimensionally stable, and is widely used for high-temperature thermal and fire protection in aerospace, iron & steel, petrochemical, power generation and military equipment.

Glass wool is produced by melting glass, fiberizing it, and then adding a binder to form a cured roll or felt. The fiber diameter is determined by the centrifugal spinning extrusion process. The key difference lies in this centrifugal technology, with the most widely used being Saint-Gobain Isover’s TEL (TELcentrifugal) process—the original technology that pioneered glass wool products.

Grade-A fire performance significantly enhances the building’s fire rating. The panel is non-combustible, produces no smoke or toxic gases, and will not rupture; even when exposed to temperatures above 100 °C for over an hour, the wall remains intact.

Grade-A fire performance significantly enhances the building’s fire rating. The panel is non-combustible, produces no smoke or toxic gases, and will not rupture; even when exposed to temperatures above 100 °C for over an hour, the wall remains intact.

Grade A fire performance significantly upgrades the building’s fire rating. The panel itself is non-combustible, produces no smoke or toxic gases, and will not rupture; even after exposure to temperatures above 100 °C for more than one hour, the wall remains intact.

Grade A fire resistance significantly improves the building’s fire rating. The panel itself is non-combustible, produces no smoke or toxic gases, and will not rupture; even when exposed to temperatures above 100 °C for more than one hour, the wall remains intact.

Core performance advantages Physical properties Abrasion resistance: Passed the abrasion resistance test, the abrasion resistance value reached more than 10,000 turns, which is 8-10 times that of ordinary solid wood Impact resistance: Can withstand the impact of a 225g steel ball falling from a height of 50cm without damage Dimensional stability: Under the environment of temperature - 20℃ to 60℃ and humidity 30%-90%, the dimensional change rate is less than 0.2% Chemical properties Stain resistance: For common stains such as coffee, soy sauce, and oily pens, there is no residue after wiping within 12 hours Corrosion resistance: Passed the 48-hour acetic acid and 10% sodium hydroxide solution contact test, the surface has no discoloration and no swelling Flame retardancy: Meets EN 13501-1 B-s1,d0 Flame retardant grade, self-extinguishing when exposed to open flames and no melting drops Natural aesthetic restoration Texture authenticity: Using hyper-realistic texture design, presenting the textures of various rare wood species such as oak, walnut, teak, including natural features such as tree knots and mineral lines Color expression: Provide 50+ customized color schemes, support matte (gloss 5-15GU), semi-matte (20-35GU), high gloss (60-85GU) three surface treatment effects Visual uniformity: Through batch color difference control technology, the ΔE value of adjacent boards is less than 1.0, ensuring visual consistency for large-area applications

Product Specification Brand MASTERTEC Material Container Product Descriptions F.H.U "MASTERTEC" is a manufacturer of modular, portable: CONTAINERS, PAVILIONS and HOUSES. This listing is for a pavilion with external dimensions of 3.40 x 9.00 m. The pavilion is 3.00 m high. The pavilion is fully insulated for year-round use. - The structure is made of reinforced steel profiles, with the ability to be lifted for unloading the entire structure, e.g., by a crane from the roof or by a forklift from the bottom, through the floor. The structure is corrosion-resistant. - Walls and roof: sandwich panel with a 100 mm thick polyurethane core - heat transfer coefficient of 0.22 W/m²K. Warm aluminum window frames, safety glass U=1.0 W/m²K - Warm aluminum doors with thermal break, safety glass U=1.0 W/m²K. - Floor: longitudinal and transverse profiles - truss, trapezoidal sheet metal, insulation layer, moisture-resistant floor panel, linoleum flooring, skirting boards. Our products also include: National Technical Assessment ITB - 654/2024 Declaration of Conformity PU-PIR-W-ST/2025/1 Hygienic Certificate We also have: Certificate of Conformity for Factory Production Control EN 1090-1:2009 A1:2011 and Quality Certificate EN ISO 3834-2:2021 Because the structure is a self-supporting steel frame, it requires no foundation or screed, only support points! As a manufacturer, we offer custom-made structures in any size, color (25 to choose from), and any dimensions and window and door layout. According to the client's request, we can also provide additional equipment: - additional partition walls - electrical and lighting installations - fully equipped restrooms - LAN ports, HDMI cables, antenna cables - exterior façade personalization (any image, logo, or text on façade panels) We also implement projects based on the client's specifications. Mastertec guarantees the reliability and durability of the products we have been manufacturing since 2008. Thanks to our versatility and the variety of solutions we offer, many companies and institutions have already used our services, including Mercedes, Orange, T-Mobile, Toyota, Lotos, and Ikea. We are delighted that so many customers have trusted us, and we hope that many more will – we offer the largest selection of containers on the market! We ensure solid workmanship, as well as stylish and high-quality exterior and interior finishes. Thanks to our modern production facilities and the use of state-of-the-art CNC machines, we have a production capacity of 30 modules per month.

We are pleased to offer high-quality PTFE (polytetrafluoroethylene) rods available in two grades:   70% PTFE compound   100% pure PTFE   Product Specifications:   Form: Rods   Purity: 70% and 100%   Minimum Order Quantity: 20,000 kg   Price: $12.00 per kg (EXW)   Our PTFE products are manufactured according to strict quality standards and are suitable for a wide range of industrial applications due to their exceptional chemical resistance and thermal stability.   Should you have any questions or require technical data sheets, samples, or delivery terms, feel free to contact us.   We look forward to establishing a successful business relationship with you.