Construction Materials in bulk on Qoovee

Dry building putty mixture made on gypsum binder with various additives in accordance with GOST 31387-2008. Possesses high adhesive properties. It is intended for preparation of surfaces for finishing when carrying out interior work on concrete, cement screed or gypsum plaster and on other surfaces of gypsum bases. Layer thickness for one application - 1mm. Creates a flat and smooth surface that does not need a primer, for painting or wallpapering. When dry, it does not crack and allows air to pass through and thereby balances the moisture level. Very lightweight, provides thermal insulation. Does not drain or collect. Has fire-fighting properties.

Gypsum-based dry plaster mix, manufactured in accordance with GOST 31377-2008. Used for interior work for leveling and plastering stone, brick, gypsum, concrete, monolithic concrete, etc. surfaces. It is applied with a layer thickness of 5 mm to 50 mm. It has high adhesive properties and does not need additional materials. Does not drain or collect. It allows air to pass through and thereby balances the humidity level in the rooms. Provides thermal insulation. Has energy-saving and fire-fighting properties.

Manufacturer LLC Topol offers to wholesale treatment facilities. Assistance in the accurate selection of the necessary sewage treatment plants for summer cottages, houses, cottages and any residential buildings with up to twelve permanent residents. A special offer for construction crews and those wishing to become an official representative of Topol LLC. Sale of modern volatile septic tanks in bulk in Moscow and with fast delivery across the Russian Federation.

Product specifications: Material: Galvanized steel Type of construction: Prefabricated frame Construction size: According to the project documentation Notes: We design and manufacture structures of any complexity in accordance with the terms of reference. We can also make an order according to your drawings

The Сsolar profile is used to create various systems for attaching solar power plants to roofs, when installing ventilation, heating systems and laying electrical cable networks. The Сsolar profile is easy and quick to install, while reliably fixing the structure. The Сsolar profile (mounting traverse) is ideal for quick and effective fastening of ventilation ducts, electric trays, water pipes, solar panels. Also, the crosshead can be used in the assembly of crossheads, consoles, supporting structures of any type. The Сsolar profile is made with a thickness of 1.5 mm. The length of the profile is limited only by the transport dimensions.

The reinforced Z profile is used in the manufacture of roof and wall purlins, in the construction of light frame structures in the LSTC technology. Reinforced Z profiles are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 2.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g per square meter. m.

The corner is used to connect other profiles during installation, both support tables and self-supporting structures for arranging a ventilated facade. Most often, the corner is used in the manufacture of arched structures, as well as in other structures where there is some bend. Also, the corner can be used in furniture production, providing even corners. L profiles are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 3.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be provided with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g / m. sq.

The U profile is used in the manufacture of columns, beams, trusses for the load-bearing frames of buildings. It can be used as roofing and wall purlins, lathing, assembly traverse. U profiles are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 2.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g per square meter. m.

Profile C is used in the manufacture of columns, beams, trusses for the bearing frames of buildings. It can be used as roofing and wall purlins, lathing, assembly traverse. Profiles C are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 3.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be provided with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g / m. sq.

The Omega profile is used to form the frame of suspended ceilings and wall cladding, as a lathing for roofs and walls, for arranging fences. It is often used as a basic element in the construction of greenhouses. It can also perform the function of posts and girders in the intake sections. Omega profiles are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 2.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g per square meter. m.

Production of WPC decking boards with 3D effect, wood embossing, non-slip, non-fading, non-rotting. Guarantee . (colors: wenge, chocolate, gray smoke, walnut, ivory)

Shandong Kat drilling tools Co., Ltd. is a professional enterprise engaged in rock drilling tools, mining tools and rotary drilling tools. We are willing to create a better future with high quality and low price products, advanced production technology, perfect after-sales service and honest business philosophy! The rock drilling tools, down the hole drilling tools and mining machine tools produced by the company are widely used in the fields of tunneling, drilling, mining, railway, highway, hydropower and other basic energy construction.

Briquetted coal for all questions contact

The company offers to carry out a wholesale supply of sunflower husk for technical purposes, granulated . Indicators: Mass fraction of moisture - 7% Mass fraction of total ash - 2.9% Bulk density - 430 k / l Net calorific value - 4160 kcal / kg Total sulfur - 0.1% Terms of delivery DAP , railway transport. Packaging - a big bag weighing 1000 kilograms.

The company LLC "AGROFORT" offers to carry out a wholesale supply of sunflower husk for technical purposes, granulated . Indicators: Mass fraction of moisture - 7% Mass fraction of total ash - 2.9% Bulk density - 430 k / l Net calorific value - 4160 kcal / kg Total sulfur - 0.1% Terms of delivery DAP , railway transport. Packaging - a big bag weighing 1000 kilograms.  

Latymer provides a full production cycle at its own facilities: from warping and weaving to packaging of ready branded product. We produce high-quality reinforcing fiberglass mesh according to TU U 23.1-26612172-001: 2013 and Technical product data sheets. The quality management system of Trade House LATYMER Limited Company meets the requirements of the International Organization for Standardization (ISO 9001: 2015).

Description The size of the decorative panel: 200 * 111 mm. In the package: 29 pcs. Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 180 * 70 mm.In the package: 28 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 205 * 118 mm. In the package: 22 pcs. Total area in the package: 0.35 sq. _________________________________________________________________________________________________________ Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using KLEIBERIT 566 PUR supracraft pur-glue sealant. -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 185 * 160 mm.In the package: 16 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 140 * 120 mm.In the package: 42 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Wholesale and delivery of cement from Turkey.

We offer well elements, rings, covers, hatches.

FujiPlus Air Curtains are produced to meet customer needs in any environment.

FujiPlus Sakura Series is sold as Inverter models 9000BTU / 12000BTU / 18000BTU / 24000BTU. Our products are pioneers in both price and quality.

FujiPlus Cassette Type air conditioners are produced to meet your needs in any environment.

FujiPlus living room type air conditioners are among the leading products in the world in terms of price performance. 42000BTU and 48000BTU On / Off are sold as Inverter. Different pricing is applied according to different capacities.

Assorted fittings. Production Iran

Cutting machine: Rated voltage (V): 220 Rated frequency (Hz): 50 Cutting disc diameter (mm): 110 Max. cutting depth (mm): 30 Rated power (w): 1200 Rated speed (r / min): 13000 Net (kg): 3.0

Our company offers dozens of varieties of plastic baguette for every taste. Made of high-quality plastic, the molding has properties that classical wood lacks: not afraid of changes in temperature and humidity and can be used in bathrooms, saunas, swimming pools, etc .; and of course, the price of the products plays a huge role, making the plastic baguette a really mass product. And we make your purchase even more enjoyable by offering solid discounts on plastic moldings to wholesale buyers

All marble types are available

Window sills made of wood, or vibrating, from different types of wood and veneer, oak, walnut, wenge, etc., the coating itself is varnish, resin

Angle grinder (grinder): Rated voltage (V): 220 Rated frequency (Hz): 50 Max disc diameter (mm): Ф100 DISC UP TO (mm): Ф16 Rated power (w): 710 Rated speed (r / min): 13000 Net (kg): 1.6

Screwdriver: Feature: forward and reverse rotation with speed control Rated voltage (V): 220 Rated frequency (Hz): 50 Rated input power (w): 710 Idle speed (r / min): 0-4300 Self-tapping screw (mm): 6 Net (kg): 1.6

RIMLESS Wc Pans

Modern sewage treatment plant for home and summer cottages for four people from the manufacturer. We offer to order a station for the effective treatment of domestic wastewater in houses where up to 4 people live. Suitable for private houses and summer cottages with temporary and permanent residence. The Topol 4 septic tank cleans up to 800 liters of wastewater per day and at the same time consumes little electricity.

Price (FCA): 1200 $ / ton. Sleeve width: from 85 to 120cm. Minimum order quantity: 20 tons. Payment terms: US dollar, euro. Product color: on request. 🌐 The product is certified 📑. The offered products are fully consistent with high international quality. 🌐 Export - import wholesale of high-quality 📈 goods Туркмени from Turkmenistan всего from all over the world 🇺🇳 🌐 Delivery with all types of transport ✈️ | ⛴ | 🚎 | 🚈 (INCOTERMS 2010 EXW, FCA, FOB, CIP, CIF.) 🌐 Customs clearance of goods for free 💯

Price (FCA): - 0.5 $ / m. ⚜️🏛 These exquisite slatted frames for pictures, drawings and photographs transform them into a rich look 🏛⚜️ 🌐 The product is certified 📑. The offered products are fully consistent with high international quality. 🌐 Export - import wholesale of high-quality 📈 goods Туркмени from Turkmenistan всего from all over the world 🇺🇳 🌐 Delivery with all types of transport ✈️ | ⛴ | 🚎 | 🚈 (INCOTERMS 2010 EXW, FCA, FOB, CIP, CIF.) 🌐 Customs clearance of goods for free 💯

Price (FCA): $ 20 / piece. Dimensions: 80 * 60cm, 50 * 70cm. Payment terms: USdollars, EURO.   🌐 The product is certified 📑. The offered products are fully consistent with high international quality.   🌐 Export - import wholesale of high-quality 📈 goods Туркмени from Turkmenistan всего from all over the world 🇺🇳   🌐 Delivery with all types of transport ✈️ | ⛴ | 🚎 | 🚈 (INCOTERMS 2010 EXW, FCA, FOB, CIP, CIF.)   🌐 Customs clearance of goods for free 💯

Price (FCA): 2000 $ / ton. Types: Transparent. Material: PP. Thickness: 25 microns. Width: 1.10 cm. 🌐 The product is certified 📑. The offered products are fully consistent with high international quality. 🌐 Export - import wholesale of high-quality 📈 goods Туркмени from Turkmenistan всего from all over the world 🇺🇳 🌐 Delivery with all types of transport ✈️ | ⛴ | 🚎 | 🚈 (INCOTERMS 2010 EXW, FCA, FOB, CIP, CIF.) 🌐 Customs clearance of goods for free 💯