Agriculture Machinery & Equipment in bulk on Qoovee

his series of products is made of aluminum alloy material with light weight, excellent anti-seismic and high heat exchange efficiency.

Technical data + supply Pin 1 - common Pin 2 Accuracy, max. [±FS%] 1 % Accuracy, typical [±FS%] 0.5 % Adj. zero point and span No Ambient temperature range [°C] [max] 85 °C Ambient temperature range [°C] [min] -40 °C Ambient temperature range [°F] [max] 185 °F Ambient temperature range [°F] [min] -40 °F Approval ATEX Approval comments ATEX Ex ec IIA T4 Gc Autofrettage Pressure 1600 bar China RoHS compliance Yes exceed limitations Compensated temp. range [°C] [max] 80 °C Compensated temp. range [°C] [min] 0 °C Compensated temp. range [°F] [max] 176 °F Compensated temp. range [°F] [min] 32 °F EEE category 5 small equipment (any external dimension 50 cm) Electrical conn. Male/Female Male and Female Electrical connection Angular connector Electrical connection size Pg 9 Electrical connection standard EN 175301-803-A Enclosure rating IP IP65 EU RoHS compliance Yes with exemptions EU RoHS exemption clause No Flush diaphragm No High Clipping Level 22.4 In scope of WEEE Yes In scope of WEEE and contain batteries No International Article Number 5702423064465 Intrinsically safe No Low Clipping level 3.6 Medium temperature range [°C] [max] 85 °C Medium temperature range [°C] [min] -40 °C

GM05,GM1,GM2,GM3,GM5,GM6,GM7,GM9 SAI of GM series Hydraulic Piston Motor, range GM05, GM1, GM2, GM3, GM5, GM6, GM7, GM9 for drilling rig motor, widely applied in hydraulic and transmission systems of plastics machinery, light industrial machinery, heavy type metallurgical machinery, for drilling rig  petroleum and coal mining machinery, lifting and transportation equipment, ship's deck machinery, geological prospecting equipments, etc.

Cavity T-11A Series 1 Capacity 15 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Pilot Configuration Bleed through Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Standard Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 2.3:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure See Technical Features Pilot Configuration Sealed Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 25 psi Operating Characteristic Semi-restrictive Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Model Weight 0.27 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 15 gpm Pilot Ratio 5:1 Maximum Recommended Load Pressure at Maximum Setting 4615 psi Maximum Setting 6000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 40 psi Adjustment - No. of CCW Turns from Min. to Max. Setting 5 Operating Characteristic Standard Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.44 lb.

Technical Data  Series 0 Cartridge Thread M16 Valve Hex Size 3/4 in. Valve Installation Torque 20 - 25 lbf ft Cavity T-162A What models can this kit be used with? CDAP Mechanically operated, back-to-back check valve CDAQ Mechanically operated, back-to-back check valve CNAC Fixed-orifice, non-pressure compensated, flow control valve with reverse flow check CNBC Free flow nose to side check valve with bypass orifice CSAN Insert style, single ball shuttle valve with signal at port 2 CSAW Single ball shuttle valve with signal external CSAY Single ball shuttle valve with signal at port 2 CXAD Free flow side to nose check valve CXBA Free flow nose to side check valve CXBG Flush mount, free flow nose to side check valve CXBM Insert style, free flow nose to side check valve DFBD FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBE FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBF FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DFBG FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DTBF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve FCBB Fixed-orifice pressure compensated flow control valve with reverse flow check FPBD FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBE FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBF FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 FPBG FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 FPBI FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 FPBJ FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 FPBM FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBN FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBU FLeX Series electro-proportional, blocking poppet throttle - normally closed FQBA Fixed-orifice, flow fuse valve FXBA Fixed-orifice, pressure compensated flow control valve NCBB Fully adjustable needle valve with reverse flow check NFBC Fully adjustable needle valve RDBA Direct-acting relief valve RPCC Pilot-operated, balanced piston relief valve RQCB Kick-down, pilot-operated, balanced piston relief valve XZCA All ports blocked cavity plug XZCC Flush mount, all ports blocked cavity plug XZOA All ports open cavity plug XZOC Flush mount, all ports open cavity plug  

Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC) Arc Suppression (TVS) Included Power Consumption (cold) - at rated voltage 22 watts Maximum Ambient Temperature 122 °F Voltage/Frequency 24 VDC Operating Voltage Range +/- 10% nominal Duty Cycle Rating 100 % Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin Connector Environment Rating IP65/IP67 Solenoid Tube Diameter .75 in. Coil Nut Torque 4.5 lbf in. Model Weight 8.2 oz.

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Explosion proof design for flammable refrigerants9. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14 Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings  

SOVOFLO Food Grade Pump Water Pump Diaphragm Pump KDP-14B series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose: Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14B, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14B Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings

Product Description Custom Industrial Electronic Electromagnetic Belt Screw Vibrating/Weigh Loss in Weight Feeder Scale Conveyor Dry Iron Remover dosing system Bucket type Batching Scales for Coal/Cement/Limestone/Mine IndustryTechnical parameters:weighing accuracy≤±0.5-1%weighting accuracy:≤1%; manner of working: batch service environment:Instrument:-50~50ºCweighter body:-30~+50ºC;relative humidity≤85% Power:~220V -15%-10%,50Hz  Electromagnetic Belt Vibrating/Weigh Feeder for Coal/Cement/Limestone/Mine IndustryHopper Screw Conveyor, Spiral Weighting Feeder for Sale with ISO ApprovalIndustrial Feeder Mining Screw Feeder Spiral Screw Conveyor Shaftless Conveyor Screw U Type Screw Auger Conveyor for SludgeCustom Electronic Belt Scale Automatic Electronic Belt Scale Feeder High Precision Electronic Belt Measuring Scale Conveyor Sacle Conveyor WeigherTwin Screw Loss in Weight FeederConveyor Belt Electromagnetic Separator Dry Iron Remover

G26030-2 Lithium-Ion Lawn Mower /Single Package (Economy Section) Rated voltage: 20V No-load speed: Low speed 3500/high-speed 5500±10%rpm No-load current: 5/7.5 A Rated power: 600W Maximum grass diameter: Φ3x260mm1. Adopt a front brushless high-power motor. 2. Can be used with a grass head, can also be used with a circular saw blade / and tooth blade / three-tooth blade, grass head, cutting shrubs are available. 3. the weight is lighter than petrol, lithium battery power, and more environmentally friendly.

60/20 Model Sliding cultivator 9 - 11 - 13 feet

Material: Carbon Steel Warranty: 1year. Brand Name: Tinmy Car. Model: Truck, Trailer. Size: standard size. Product Name: Truck Container Lock. Application: truck and trailer part. Quality: 100% Tested. MOQ: 1 PCS. Delivery Time: 20-30 DAYS. Certification: ISO/TS16949:2016 keyword: container twist lock.

Material: Steel Warranty: 1year. Brand Name: Tinmy Car. Model: Truck, Trailer Size: standard size. Product Name: Truck Trailer Suspension Application: truck and trailer part. Quality: 100%. Tested MOQ: 1 PCS. Delivery Time: 20-30 DAYS. Certification: ISO/TS16949:2016 keyword: Trailer Suspension Kits.

Main Advantages > Long-lasting quality, hot-dip galvanized material with 15-20 years service life. > Intensive management and automated control. > No waste of feed, save feed cost. > The sufficient drinking guarantee. > High-density raising,saves land and investment. > Automatic control of ventilation and temperature. RETECH focuses on product upgrades and technology research and development. We integrate the IOT technology and cloud computing to assist in the digital and intelligent upgrade of farms. RETECH can make chicken farming much smarter and easier.

Press granulators are designed for pelletizing sheep wool. Raw materials for granulation: sheep wool, sawdust/shavings, straw/hay, reeds, paper/cardboard, sunflower/mustard/buckwheat husks, peat, meat and bone meal, compound feed/feed/premixes, tea production waste, grain waste, bran and other biomass . The resulting product: granule (pellet): diameter 6;8 mm, length 10-20 mm. Scope of application of the finished product: - sowing with grain crops Model: BN 100W(5.5 kW)/BN 100W(7.5 kW) BN 400 W/BN600. Productivity: 50 -60 / 60-70 / 90-180 / 100-210 kg/hour. Power consumption: 5.5 /7.5 /11/ 22 kW/hour. Occupied area: 2 / 2 / 2 / 2 m2. Weight: 130 / 145 / 210 / 260 kg. Price FCA warehouse Znojmo (Czech Republic): 8500 / 9150 / 17900 / 22950 EURO. Country of origin: Czech Republic. Sheep wool pellets have many advantages: 1. The composition of wool is more uniform than manure. 2. Wool decomposes more slowly than manure, so it takes longer to nourish plants. 3. Wool retains moisture well and the soil stays moist longer. 4. The granules in the soil swell and thereby loosen the soil. These granules are great for fertilizing vegetables, fruit trees and flowers.

Description:    DC  motor Phase:         12solt  8 pole Voltage:       DC12v  24v  48v Frequency:      50/60HZ Out Power:      50w Type of bearing:      Ball bearing Protection:      Thermal cutoffs or Automatic reset thermal protector Rotation:       CW. or CCW. Speed:         200rpm   We are a gear motor manufacturer, our products including electric geared motor, coin return machine gear motor, lifter gear motor, oil pump gear motor, game machine gear motor, lift chair gear motor, massage chair gear motor, lubricator gear motor, hot dog machine gear motor, etc.   All of them meet worldwide standards and win great reputation in the fields. The goal is to achieve the corporation at ODM and OEM basis & to provide the components required for the manufacturing.

Automatic control systems of our production are modern, comprehensive solutions in the field of automation and protection of climate systems at civil and industrial construction facilities. They are manufactured both in standard design and on an individual order, taking into account all regulatory requirements in the field of safety and technical regulations of the Customs Union TR CU 004/2011 and 020/2011.   For the convenience of the consumer, standard circuit solutions are offered that implement a set of measures to ensure the smooth operation of the ventilation system and climate control equipment.   It is possible to manufacture installations with an integrated automation system on the principle of "on and running", which reduces the amount of design and installation work, as well as eliminate errors during installation and commissioning. The built-in automation provides for the installation of frequency converters and sensors with their disconnection in the control cabinet on the installation body.    The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.