Construction Materials in bulk on Qoovee

Plunger metering pumps ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with a kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a concentration of a solid non-abrasive phase of not more than 10% by mass, with a maximum density of particles up to 2000 kg / m3, with a grain size of a solid non-abrasive phase not more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Specifications: Feed-25 l / hour; Discharge pressure-250 kgf / cm2; Execution of the hydraulic part K - steel 12 X 18 H10T; Order time-tested quality!

We sell round birch, hardwood (plywood ridge), for the production of peeled veneer, 1st - 3rd grades. Raw materials are mined in the Perm Territory, and it is also possible to carry out shipments from the Republic of Udmurtia, Kirov Region, Sverdlovsk Region. The main shipments will be carried out from the following stations: Zayachya Gorka, Mendeleevo, Vereshchagino (Sverdlovskaya Railway). The cost of goods includes delivery, customs clearance. Terms of delivery DAP, CPT. Other options for cooperation are also possible.

We sell round birch, hardwood (plywood ridge), for the production of peeled veneer, 1st - 3rd grades. Raw materials are mined in the Perm Territory, and it is also possible to carry out shipments from the Republic of Udmurtia, Kirov Region, Sverdlovsk Region. The main shipments will be carried out from the following stations: Zayachya Gorka, Mendeleevo, Vereshchagino (Sverdlovskaya Railway). The cost of goods includes delivery, customs clearance. Terms of delivery DAP, CPT. Other options for cooperation are also possible.

Concrete dye pigment Hormusend HLV-21 is used in concrete solution to add color.   Materials:   garden paths; paving slabs; blind areas around the house; concrete products. Benefits:   does not dissolve in water; does not fade; Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.

Black concrete pigment Hormusend HLV-21 is used in concrete solution to give color.   The pigment can be colored:   garden paths; paving slabs; blind areas around the house; concrete products. Benefits:   does not dissolve in water; does not fade; Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.

Concrete dye pigment orange Hormusend HLV-21 is used in concrete mortar to add color.   Materials:   putty; paving slabs; screeds; plaster; garden paths; concrete products. Benefits:   does not dissolve in water; does not fade; Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.

Concrete dye pigment Hormusend HLV-21 blue is used in concrete mortar to add color.   Materials:   garden paths; paving slabs; blind areas around the house; concrete products. Benefits:   does not dissolve in water; does not fade; Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.

Concrete dye pigment brown Hormusend HLV-21 is used in concrete mortar to add color.   Materials:   putty; paving slabs; screeds; plaster; garden paths; concrete products. Benefits:   does not dissolve in water; does not fade; Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.

Concrete dye pigment yellow Hormusend HLV-21 is used in concrete mortar to add color.   Materials:   putty; paving slabs; screeds; plaster; garden paths; concrete products. Benefits:   does not dissolve in water; does not fade; Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.

Hormusend HLV-21 green concrete dye pigment is used in concrete mortar to add color.   Materials:   putty; paving slabs; screeds; plaster; garden paths; concrete products. Benefits:   does not dissolve in water; does not fade; Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.

• Strength of concrete is accelerated by 3 times • Increase in concrete strength by 15% • Increase in the brand strength of concrete by 70% • Mobility of concrete increases from P1 to P5 • Prevention of water separation • Increase in the heat of hydration

• Protection against cracks • Increase the mobility of the solution by 50%, from P1 to P5 • Increase in thermal conductivity of concrete by 30% • Increasing the strength (grade) of concrete by 25% • Saving of cement up to 20%. • Increased adhesion of new concrete with old • Increased durability of concrete • Protection of reinforcement against corrosion

• Protection against cracks • Increase the mobility of the solution by 50%, from P1 to P5 • Increase in thermal conductivity of concrete by 30% • Increasing the strength (grade) of concrete by 25% • Saving of cement up to 20%. • Increased adhesion of new concrete with old • Increased durability of concrete • Protection of reinforcement against corrosion

• Increases the mobility of the mortar, higher than P5 for concrete • Provides cement savings up to 20% • Increases frost resistance of concrete up to F 300 and higher • Increases the strength (grade) of concrete by 20-25% • Increases the water resistance of concrete to W8 • Gives retardation of setting (vitality of concrete) up to 3-4 hours • Increases the durability and frost resistance of concrete • Makes the solution plastic

• reduces water absorption up to 25 times; • prevents the appearance of "efflorescence"; • gives frost and corrosion resistance, lightfastness, prevents surface contamination; • does not change the appearance of the material, retains gas and breathability; • increases the thermal insulation properties of the surface; • increases the strength of the material; • prevents the growth of microorganisms and moss on the surface of the material.

• Increase the mobility of the keyboard from P1 to P5 • Reducing the water demand of the Solution (W / C) by 20% • Increase in density, strength and frost resistance of concrete. • Increasing the water resistance of concrete to W-8 and higher • Increasing the strength (grade) of concrete by 100 • Improving the homogeneity of the concrete mix. • Elimination of "holes", craters and pits on the surface • Prevention of cracking • Prevention of adhesion of concrete to forms and formwork • Reducing the appearance of efflorescence and leaching of pigments • Improved workability • Reduced shrinkage and creep • Saving of cement up to 15-20%. • Protection of tiles from cracking in winter. • Decrease in porosity (does not allow water to be easily absorbed) • Environmental friendliness (does not have a pungent smell, does not corrode the eyes)

• Increase of concrete mobility by 7 times (up to P5) • Reinforcement of concrete waterproofing up to W6 • Reduction of water demand by 30% • Saving cement up to 20% • Increasing the strength (grade) of concrete by 25% • Acceleration of concrete hardening by 3 times • Increase of the formwork turnover up to 2 times a day • Improved adhesion of new concrete with old • Improving the durability of concrete • Protection of reinforcement against corrosion

• Strength of concrete is accelerated by 3 times • Increase in concrete strength by 15% • Increase in the brand strength of concrete by 70% • Mobility of concrete increases from P1 to P5 • Prevention of water separation • Increase in the heat of hydration

• Strength of concrete is accelerated by 3 times • Increase in concrete strength by 15% • Increase in the brand strength of concrete by 70% • Mobility of concrete increases from P1 to P5 • Prevention of water separation • Increase in the heat of hydration

• reduces water absorption up to 25 times; • prevents the appearance of efflorescence; • gives frost and corrosion resistance, lightfastness, prevents surface contamination; • does not change the appearance of the material, retains gas and breathability; • increases the thermal insulation properties of the surface; • increases the strength of the material; • prevents the growth of microorganisms and moss on the surface of the material

Red concrete pigment Hormusend HLV-21 is used in concrete mortar to add color.   Materials:   putty; paving slabs; screeds; plaster; garden paths; concrete products. Benefits:   does not dissolve in water; does not fade; Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.

• Fiber screed HLV-52 costs significantly less than reinforcing mesh • Reinforcement of the screed occurs throughout the entire volume • The strength of the screed increases 10-100 times • Fiber HLV-52 is resistant to the influence of various chemicals and retains its reinforcing properties for a long time Specifications: Raw materials used 100% polypropylene Fiber length 6-12 mm Transverse distance of fibers 20 microns Tensile strength 170-260 MPa Elongation to break 150-250% Chemical resistance is exceptional Resistance to salts, acids, alkalis is exceptional High resistance to solvents Low electrical conductivity Low temperature resistance Ignition temperature 320 ° С Melting point 160 ° С

• Increases the mobility of the mortar, higher than P5 for concrete • Provides cement savings up to 20% • Increases frost resistance of concrete up to F 300 and higher • Increases the strength (grade) of concrete by 20-25% • Increases the water resistance of concrete to W8 • Gives retardation of setting (vitality of concrete) up to 3-4 hours • Increases the durability and frost resistance of concrete • Makes the solution plastic

Характеристики: густая прозрачная жидкость без механических включений, видимых невооруженным взглядом. Применение жидкого стекла (оно же силикат натрия): устройство гидроизоляции; укладка линолеума и плитки ПВХ; изготовление замазок для герметизации металлических труб; шлифовка и полировка кузовов автомобилей; пропитка тканей для придания им противопожарных свойств; обработка раневых поверхностей на стволах деревьев (прививки, обрезка); ремонт поврежденного стекла и фарфора

Абсолютно все деревянные дома, срубы и бани из профилированного и клееного бруса, предлагаемые нашей компанией, разрабатываются проектировщиками высокого класса. При проектировке деревянных домов, бань и срубов из профилированного и клееного бруса применяются передовые автоматизированные компьютерные системы проектирования для строения деревянных строений. Через наш сайт вы можете заказать проектирование и строительство дома из бруса и оцилиндрованного бревна, сруба или бани,а также передать строительство бань, срубов и деревянных домов из профилированного и клееного бруса нашим строителям,которые будут использовать ваши личные проекты. Мы предоставляем вам возможность вносить правки в стандартные проектные работы, представленные на нашем сайте, либо в проекты из других источников, и затем использовать их при строительстве. Все требования будут учтены и внесены в проект, что позволит вам получить деревянные дома, бани, срубы из профилированного и клееного бруса вашей мечты.

Артикул: TPL-KV-NF60100 Характеристики: Размер: 60х100 см Толщина: 1мм Температурный предел верхнего слоя +1200°С Температурный предел лавсановой подложки +200°С Вес: 250 гр. Применение: Защита поверхности от возникновения пожара при попадании искр, падения продуктов горения, разлива пожароопасных жидкостей и риск их воспламенения и других пожароопасных ситуаций. Основное бытовое применение это укладка возле камина или печи, так же можно использовать в качестве защитного экрана при проведении сварочных и иных работ. Комплект: Коврик, упаковка тубус

Name: Heated kit "Penguin-T" Part numbers (examples): TPL-PINGVIN-K1-XX / XX TPL-PINGVIN-K1-48 / 41 (vest / insole size) Features: Size: 48 to 56 Power: 12 Volt Upper fabric: Cloak fabric 240T / stitch square 5x5 / synthetic winterizer 200 gr / heating elements, removable (hidden under the lining) Weight: 700 gr. Set: Vest "HotWalker-G" Heating elements 11x63 + 11x63 cm Insoles with heating 1 pair Extension for insoles 1 pc Power cord in cigarette lighter 2pcs spiral

Name: Flexible heating element 18x54 cm Article: TPL-EL-1854-JACK2.1 / F Characteristics: Size: 18x54 cm Power supply: 12 to 14 Volts Current consumption (for 12V): 1.3A / Power: 15.6 W Current consumption (for 14V): 1.6A / Power: 22.4 W (* Element resistance: 9 Ohms, with errors) Heating temperature (under clothes): 45 to 57 ° С Wire length (default): 50 cm Connector (default): socket 2.1x5.5 mm Weight: 50g. Set: item Warranty: 12 months

Name: Flexible heating element 30x37 cm Article: TPL-EL-3037-JACK2.1 / F Specifications: Size: 30x37 cm Power supply: 12 to 14 Volts Current consumption (for 12V): 1.3A / Power: 15.6W Power consumption current (for 14V): 1.6A / Power: 22.4W (* Element resistance: 9 Ohms, with errors) Heating temperature (under clothes): 45 to 57 ° С Wire length (default): 50 cm Connector ( default): socket 2.1x5.5 mm Weight: 50g. Set: item Warranty: 12 months

Name: Flexible heating element 9x24 cm Article: TPL-EL-924-USB / M Specifications: Size: 9x24 cm Power supply: 5 to 7.4 Volts Current consumption (for 5V): 0.7A / Power: 3.5 W Current consumption (for 7.4V): 1A / Power: 7.4 W (* Element resistance: 7.2 Ohms, with errors) Heating temperature (under clothes): 45 to 65 ° С Wire length (default): 50 cm Connector (default): USB Weight: 20g. Set: item Warranty: 12 months