{name} in bulk on Qoovee

Radial fans of VRK.G type are used in exhaust ventilation systems of industrial and public buildings. General-exchange fans are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to plus 70 ˚С, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³. VRK.G fans are also presented in corrosion-resistant and explosion-proof versions.

Radial fans of VR.80 -75 type are used in supply and exhaust ventilation systems of industrial and public buildings. Designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +70 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³. Also fans VR.80-75 are presented in explosion-proof and corrosion-resistant versions.

Radial smoke exhaust fans of VRD.80-75 type are designed to remove high-temperature smoke-air mixtures arising during a fire and simultaneously remove heat outside the serviced room. The fan is used in exhaust (emergency) ventilation systems of industrial, public, residential, administrative and other premises (except for categories A and B of explosion hazard according to NPB 105-03) to remove smoke-air mixtures formed during a fire with a temperature of up to +400 ° C or up to + 600 ° C for 120 minutes. It is possible to use fans in general ventilation systems of industrial, public, residential, administrative and other premises for moving air or other non-explosive, non-aggressive gas mixtures with temperatures up to + 70 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities no more than 100 mg / m³, with reduced rotation frequency no more than 50%.

Rectangular duct fans (VKT) are used in supply and exhaust ventilation systems for industrial and public buildings. The fans are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +40 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³. Climatic modification of fans U2 in accordance with GOST 15150-69 (ambient temperature from -30 ° C to +40 ° C). In the place where the fans are installed, the root mean square value of the vibration velocity from external sources of vibration should not exceed 2 mm / s. The degree of protection provided by the sheath is IP44.

Fiberboard TSN 20 is used in the furniture and door industry, construction, decoration. The sheets are suitable for arranging heat-insulating and sound-insulating partitions. The advantages of fiberboard include high strength, durability, ease of processing, smooth, even surface. Sheets are easy to work with, even with no experience. Fiberboard TSN-20 - Sanded on both sides, E2.Thicknesses: 2.5mm, 2.8mm, 3mm, 3.2mm. Sheet format: 2140 × 1220, 2440 × 1220, 2620 × 1220, 2745 × 1220, 2750 × 1220, 3050 × 1220, 3060 × 1220, 2440 × 1830, 2440 × 2050, 2440 × 2070, 2440 × 1700, 2745 × 1700 , 2745 × 740. The truck fits about 9000 square meters. Price on request.

The advantages of the material include high strength, rigidity, uniformity, and ease of processing. Chipboard lends itself well to mechanical processing (sawing, planing, drilling, milling), easily glued and painted. It is used in construction, mechanical engineering, furniture manufacturing. We can offer you: Chipboard 2440x1830x16 mm Grade 1. Emission class E1 (the lowest content of free formaldehyde). Finishing degree: Sanded on both sides. The truck loading rate is 420 sheets. We are ready to consider proposals for export. Price on request.

Rima brand flexible cast iron slices Large capacity option (from 20 kW to 250 kW) Electronic ignition control High combustion performance with low flue emissions Use with natural gas and lpg Standard and electronic control panel options 2 years warranty

Rima brand local AlSi10Mg cast heat exchanger 107% yield value Wide heating capacity option (from 70 kW to 3250 kW) Determining the boiler capacity in accordance with the 1:7 flame modulation heat load 6 bar working pressure High seasonal efficiency, low emission values Siemens cascade control panel providing different zone controls 16 boiler cascade connection Compatibility with Open Therm and BUS communication systems Casting slices for ease of installation, use and maintenance low sound level

Forced Burner Boilers Rima brand flexible cast iron sections Wide heating capacity option (from 30 kW to 930 kW) High efficiency 3-pass design High combustion performance with low flue emissions Use with liquid and gas fuel burners Standard and electronic control panel options

Solid Fuel Boilers Rima brand flexible cast iron sections Wide capacity option (from 20 kW to 95 kW) Can be used with wood and coal Chimney flap and simple chimney draft control

acrylic facade paint

The manufacturer offers a modern wastewater treatment plant, which is designed for a house for 6 people. The Poplar 6 household wastewater treatment plant has several modifications, namely with gravity and forced drainage, as well as with an extended neck. Septic tank Topol 6 will be able to purify 98% of domestic wastewater in a house or cottage, where up to 6 people live. Installation of Poplar 6 takes 1 work shift, about 6-8 hours. Fast delivery of Topol 6 autonomous sewage stations throughout Russia.

They are mainly used for anti-filtration protection of concrete and brick structures in order to create a waterproofing layer on horizontal (including ceilings) and vertical surfaces. Ready-to-use does not require warming up. Contains cement and fiber filler.

Ready-to-use waterproofing mastic. Mastic is perfect for waterproofing foundations, basements, floor slabs

SALE OF SELF CUTTERS Good afternoon, FART-NSK LLC Novosibirsk we offer to view our assortment. Individual approach to each client !!! In our company LLC `` FART-NSK '' you will always find a huge assortment of fasteners. There are more than 2000 items of goods in constant availability in the warehouse. Highly qualified employees with extensive experience are always ready to solve your questions. We work with both wholesale and retail clients, and are always ready to place an order of any degree of complexity.

Travertine. Marble. Stones for construction. We are looking for partners, buyers, clients.

Article МС 2233. Mosaic made of tempered glass, chip size 48x48 / 23x23 mm., 0.54 m2 in a box. The mosaic is resistant to temperature changes, color-fast, suitable for laying both on walls and on the floor. Recommended for indoor use. .

Our factory produces several types of single-deck plastic pallets of different sizes and capacities.

We work from stock and on order, we have our own production and 2 offices in Southeast Asia, as well as a large warehouse in the Moscow region and an office in Moscow, complete set from 2 days.

The roofing screw consists of a turnkey hex head, a rubberized washer (EPDM), which prevents moisture penetration, and a self-drilling tip. The thread is rare or frequent, depending on the diameter of the self-tapping screw. The main application is fastening corrugated board to a wooden or metal crate.

The drywall-metal (GM) self-tapping screw has a frequent thread, a sharp tip and a countersunk head for a Phillips recess (PH2). It is used for fastening wooden structures and drywall to metal profiles, no more than 0.9 mm thick.

The dowel-nail for thermal insulation is a fastener, consisting of a dowel with a wide round head and a special nail, designed for attaching heat-insulating materials to dense solid substrates such as brick, concrete and stone. It is used for installation on walls especially exposed to adverse weather conditions. The dowel has a two-section wedging zone and a wide plastic clamping washer with a diameter of 60 mm, which provides easy installation and reliable fastening of the thermal insulation material to the supporting base. Dowel length - 100 mm. Diameter - 10 mm. The fixing of the dowel in the wall is done by driving in a metal spreader nail. The metal nail is recommended for dowel lengths of 140 mm or more, as well as for the installation of heavy structures.

A dowel-nail is a fastener, consisting of a dowel and a special nail, designed to attach objects to dense solid materials such as brick and concrete. The plastic dowel has a special hidden base. The dowel-nail is used to attach objects to materials such as concrete, foam concrete, brick, wood, stone, etc. The dowel diameter is 6 mm. Length - 40 mm.

Interior high-pressure paints on any surfaces, incl. for all types of wallpaper; moisture resistant; washable; snow-white. High-strength facade high-strength paints; textured. Elastic silicone-based paints, perfectly retains moisture, has excellent dirt-repellent properties, and hides cracks. Suitable for indoor and outdoor use, coating durability up to 15 years. Acrylic enamels for concrete, wood, metal, for heating radiators, as well as a deep penetration primer, concrete contact, grout for joints, We can tint on request.

New Uber light boxes available from the manufacturer. Complete with universal car mounts. Sending to other cities is possible (to the door or to the terminal of your city). Sale by wholesale and retail. & nbsp; If you have a question - call! Package Contents: High impact plastic box; Reflective taping; Universal, quick-release fasteners

Safety glasses are used to protect the eyes from dust, scale, paint, shavings during work. These glasses have a transparent design. The material is plastic. Technical characteristics of goods: Type of glasses - goggles-mask closed with natural ventilation; Optical class - 1; Lens material - polycarbonate; Lens color - transparent; Body material - soft non-flammable PVC; Fastening - adjustable headband; The type of use is multiple.

Boilers of the Bratsk-M series are designed for heat supply of buildings and structures for various purposes. The boilers operate not only on screened bituminous coals, but also on ordinary bituminous and brown coals with a lump size of up to 60 mm and a content of fine particles (less than 6 mm) up to 50%. The boiler delivery set includes a mechanical furnace with a control cabinet, which consists of a furnace bed, an electromechanical drive bar, a fuel bunker, a fan, a secondary blast collector with a roof. The boiler heating surfaces are two staggered packages of cast-iron sections mounted on a brick pedestal. The two-way movement of gases is carried out along the convective surface of the sections. Gas inlet - through a water-cooled steel chamber. The control cabinet provides automatic operation of the boiler and its protection in case of deviations from the permissible values: pressure, water temperature and discharge in the combustion chamber, as well as signaling in case of an emergency.

Boilers "Bratsk-0.8" are designed for heating buildings and structures for various purposes. The boilers operate not only on screened bituminous coals, but also on ordinary bituminous and brown coals with a lump size of up to 60 mm and a content of fine particles (less than 6 mm) up to 50%. The boiler delivery set includes a mechanical furnace with a control cabinet, which consists of a furnace bed, an electromechanical drive bar, a fuel bunker, a fan, a secondary blast collector with a roof. The boiler heating surfaces are two staggered packages of cast-iron sections mounted on a brick pedestal. The two-way movement of gases is carried out along the convective surface of the sections. Gas inlet - through a water-cooled steel chamber. The control cabinet provides automatic operation of the boiler and its protection in case of deviations from the permissible values: pressure, water temperature and discharge in the combustion chamber, as well as signaling in case of an emergency.

High quality building plaster.

Dry building mixes at wholesale prices.

The # 1 company in Kyrgyzstan providing fogging systems. We have the best outdoor cooling technology! Thanks to the uniqueness of the systems and high optimization, we have already implemented more than 110 large-scale projects in Kyrgyzstan. Due to the certified quality of fogging systems Tuman.kg, customers receive a 6-year warranty for the installed equipment (3 years of equipment warranty and 3 years of free service). The main direction of the company is the cooling of summer terraces, cafes, restaurants, gazebos, production facilities, etc. Artificial fogging systems are the surest and most advanced way to combat unwanted odors, dust and sultry heat in open spaces. Fogging technologies allow you to control the air temperature, create an atmosphere of the desired coolness, as well as completely cut off dust and allergens contained in it. The company has been providing services since 2012. Over the years, the systems have proven their functionality, and the company's employees have proven their professionalism. Our clients: Teahouse "Vostochka" Cafe "Koreana Family" Uncle Tom's Cabin Cafe Restaurant "Furusato" Restaurant "Navigator" Chaikhana "Bukhara" Coffee shop "Vannilla sky" Continental Restaurant Time out restaurant Confectionery "Our mark" Cafe "Red Fox" Cafe "Diyar" Restaurant "Arzu style" Cafe "Kaganat" Restaurant "Arzu" (Lebedinovka) Restaurant "Talisman" Restaurant "Ulu Too" Cafe "Rublevka" (Kordai) Teahouse "Omar Khayam" BC "Beren Gold" Restaurant "Villa V Club" Hotel "Jannat" Restaurant "Skullcap" Barbecue "Caucasian yard" Cafe "Aist" Cafe "Veranda" Cafe "Shafran" Wine restaurant "Vinoteka" Oculus Cocktail Bar Teahouse "Teahouse No. 1" Beauty salon "Success" Cafe "Jasmine" Cafe "Arabeska" Cafe "Santa" Gastropub "Street Myasnaya" Cafe "Kleo" Coffee shop "Gloria" Cafe "Fakir" Cafe "Joma" "Barbecue No. 1" Bazaar "Ak Emir" Cafe "Odnoklassniki" Cafe "Ozhak Kebab" Cafe "Di 2" Coffee house "Bagel" "Golf Club" Bar "Pinta Pub" Coffee house "Panda" Restaurant "Bravo" Cafe "Merci Baku" "Barclays Pub" Hotel "Ambassador" Cafe "Aura" Restaurant "Veslo" Cafe "Khoja Nasreddin" Cafe "Saksaul" Restaurant "Prego" "Live Bar" BC "Ordo" Cafe "Ugolyok" Teahouse "Aladdin's Lamp" "Neo Med" Cafe "Ormon Khan" Farms Mycelium Greenhouses Disinfection Disinfection tunnel

We build arched frame hangars for production. & nbsp; In construction, we will take into account the peculiarities of your business, the need for a crane, room temperature, fire safety. Hangar specifications: Length x Width x Height & ndash; 30 m x 15 m x 7.5 m, Foundation & ndash; bored piles, Concrete grillage & ndash; 1 meter high, Arches & ndash; profile tube 60 x 40 mm, Lathing & ndash; timber 50 x 100 mm, Coverage & ndash; professional sheet С 8 (thickness 0,4 & hellip; 0,45 mm) Insulation & ndash; mineral wool 100 mm thick. Gate & ndash; sectional end 4 x 4 m. Floor device & ndash; concrete with a hardened top layer (topping). & nbsp; Why choose SarAgroMontazh for building? - Ready & nbsp; do the job on a turnkey basis from the project to the installation of the floor in the hangar. At the end of construction & nbsp; take over the hangar and bring in equipment. - Construction time & ndash; 30 -45 days. Metal structures are manufactured in the workshop, and assembly and installation takes place at the construction site. Due to this, we reduce the construction time. - Purchase metal, profiled sheet & nbsp; & nbsp; from trusted suppliers, the metal will be of the required thickness & ndash ; & nbsp; you can check it yourself & nbsp; . Certificates and micrometer & nbsp; will provide . Call, we will provide & nbsp; calculations and contacts of customers who built it.

Building straight-walled grain storage hangars & nbsp; capacity & nbsp; 9 & nbsp; 000 tons of grain & nbsp; & laquo; turnkey '. Price: Hangar dimensions (width x length) - & nbsp; 24 x 120 & nbsp; m; Retaining wall inside & ndash; 2.4 m high concrete; Roofing sheet - & nbsp; wave height 44 mm, thickness 0.5 mm; Professional sheet on the walls & ndash; wave height 20 mm, thickness 0.45 mm; Gate & ndash; 4 x 4 m at the ends of buildings or at the side of the hangar; Louvered grilles for grain ventilation. SarAgroMontazh Company trust construction because .., <! - [if! supportLists] -> 1) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; <! - [endif] -> We have been building grain storage hangars for 5 years already. We understand how thick the metal should be, what kind of profiled sheet is needed for the hangar to please you & nbsp; years. <! - [if! supportLists] -> 2) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; <! - [endif] -> If after the conclusion of the contract your plans change & ndash; we are & nbsp; ready to go to a meeting and make changes to the agreement. <! - [if! supportLists] -> 3) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; <! - [endif] -> We buy metal and profiled sheet from trusted suppliers, there will be the declared thickness of the metal & ndash; & nbsp; you can check it yourself. Certificates and micrometer & nbsp; will provide. Call, & nbsp; will provide a calculation and & nbsp; contacts of farmers, peasant farms and agricultural cooperatives, who have already built hangars! & nbsp;

Founded in 2008, Taizhou Beierde Electromechanical Technology Co., Ltd is a professional China Booster Pipe Fans Manufacturers and Booster Pipe Fans factory,which specializing in various AC servo motors and axial flow fan rotors.We have been continuously increasing capital investment and introducing advanced equipment, production technology, and management experience. Now we have a full set of production equipment and testing equipment, All products have passed the National Compulsory Product Certification (3C) and the EU Compulsory Product Certification (CE),we established a comprehensive service system and won widespread praise and trust with high-quality wholesale Booster Pipe Fans and satisfactory after-sales service. We have been making persistent efforts on the basis of the original to create a brilliant future

Surface Preparation and Application Method: Dirty, dusty, swollen old painted surfaces should be cleaned and primed with Filled Primer or Polizolan. Using Filled Primer on newly plastered or plastered surfaces recommended. 2-3 hours after the primer application depending on the weather conditions between the coats. should be applied in at least two coats. Thinning / Mixing Ratio: It is diluted 25% by volume with water. Paintable (Coatable) Area Paintable (Coatable) Area: 13-15 m²/L on one floor. Drying Time: At 20°C, it provides touch dry in 15 minutes and dust holding dry in 30 minutes. Wait at least 4 hours between coats. It completes its hard drying in 4 hours. Recommended Practice

Surface Preparation and Application Method: Newly painted and old painted surfaces should be cleaned of dust and dirt, the required surface After repairs are made, a single coat of primer should be applied. 1/1 with water When thinned, it can be applied to eliminate problems related to insulation on the surface. Thinning / Mixing Ratio: Thinning is done according to the surface to be used. Label information must be followed. Paintable (Coated) Area: 60-100 m²/L depending on the absorbency of the surface when thinned at 1/7. Surface depending on its absorbency and application method. Drying Time: It completes its drying in 1 hour. Recommended Application Apparatus: Exterior, interior roller, satin roller and brush.

Surface Preparation and Application Method: The surfaces to be applied must be cleaned of any substance that will reduce adhesion. After the primer has dried (4 - 6 hours) top coat paint application is passed. Surface temperature at least 3 degrees above dew point should be high. It is necessary to wait 24 hours between coats in the final coat application. Application Temperature: Min +10°C / Max + 30°C. Thinning / Mixing Ratio: Single component / Water Addition 15 - 20% Paintable (Coated) Area: 5-6 m²/L or 3-4m²/kg (60-80 µ DFT) Drying Time: It dries to the touch in 20-30 minutes and completely dries in 24 hours. Recommended Application Apparatus: It is applied with a roller and brush.

Surface Preparation and Application Method: The surfaces to be applied must be smooth, solid, dry and free from dust. It can be applied on all horizontal and vertical surfaces. Applying two coats as cross coats recommended. Wait at least 24 hours between coats. Thinning / Mixing Ratio: It is ready to use. Paintable (Coated) Area: 1KG 4-5 m²/kg in one coat. Drying Time: Touch dry at 20°C in 30 minutes, dust holding dry in 2-3 hours, hard completes its drying in 24 hours. Recommended Application Apparatus: It is applied with a roller and brush.

Surface Preparation and Application Method: The surfaces to be applied must be smooth, solid, dry and free from dust. It can be applied on all horizontal and vertical surfaces. Applying two coats as cross coats recommended. Wait at least 24 hours between coats. Thinning / Mixing Ratio: Thinning by Ground Paintable (Coatable) Area 8 - 10 m²/kg in one coat. Drying Time: Touch dry at 20°C in 30 minutes, dust holding dry in 2-3 hours, hard completes its drying in 24 hours. Recommended Application Apparatus: It is applied with a roller and brush.

Surface Preparation and Application Method: Dirty or loose textures on the first surfaces to be applied, also on old painted surfaces. Swelled or dusty parts should be cleaned and primed with Paint Primer. It is recommended to be applied as a single layer after the primer application. Thinning / Mixing Ratio: It is thinned by 20-30% by volume with water. Paintable (Coated) Area: 8-10 m²/L in one coat Drying Time: It completes its drying in 1-3 hours at 20°C and 50% relative humidity. Recommended Application Apparatus: It is applied with an interior roller and brush.