Medical equipment in bulk on Qoovee

    

   

 

    

 

 

 

 

Rapid Test Kit Ref: G01 Min. Order :5000 Units Source :China Port :Shanghai, Ningbo Certification :CE/ISO13485/FDA Payment : T/T, L/C       

Feature   Convenience Compact appearance, more convenient to carry.A button to wake up,  even the elderly can also be used simply.Two 1.5V AAA batteries can  be used continuously for more than 15 hours, more environmental  protection and saving.   Resting Heart Rate Heart beats per minute while at rest tells a lot about your internal  health and fitness levels. It is a strong indicator of your risk for  heart problems. Blood Oxygen Level Your body requires a very precise balance of oxygen in the blood.  For your body to perform optimally, blood oxygen levels should  be above 95%.   Specification  Operation system / SpO2 Detection scope: 35%-100% Accuracy: ±2% 80%-100% ±3% 70%-79% Pulse Rate Rage：25-250BPM Accuracy：±2BPM Resolution:1BPM Bluetooth / Battery Type Two 1.5V AAA alkaline batteries Service life Over 10000 times Display OLED Working voltage D.C.2.2 V~D.C.3.4V Operation   environment Temperature: 5℃ - 40℃ Relative humidity: 15% - 80% Atmospheric pressure: 86Kpa - 106Kpa Size 58 (H) × 34 (W) × 30(D)mm Weight 50g Include batteries Delivery time Mass production: about 15 days (2000pieces)OEM: about 25 days

Since October 2006 Electro Range MFG Co has been supplying the Healthcare Industry professionals and distributors with finest quality Electrosurgical instruments and innovative products for Electrosurgery. We are recognized as being amongst one of the most progressive medical companies in the Sialkot. With our extensive wide range of Bipolar Forceps, Electrosurgical Cables, Diathermy Pencils, Patient Return Plates and Electrodes plus with a combination of forefather business experience in the medical field, our products are specifically designed to offer both exceptional quality and value for money to Healthcare Professionals and Organizations. During the last few years there have been numerous developments within our company, with the introduction of many new innovative products, directive certifications, huge square feet manufacturing facility, highly skilled staff and services to our portfolio, which has allowed Electro Range MFG Co to make a significant impact on the healthcare market. Our range of specialized Electrosurgical instrumentation is uniquely manufactured in our own manufacturing unit to the highest standards of craftsmanship. ERMC extremely proud to be amongst the few remaining companies with self-manufacturing unit facility to produce Electrosurgical instruments in Sialkot with experience of more than a decade.

“SA International” - Shanghai Asia International Electrical & Mechanical Co., LTDispart of theSIBC Group, which has been providing equipment and technology selection services in various fields since 2017.   -   Construction.- Road construction.- Metallurgy.- Mining.- Chemical industry.- Production lines for various purposes.   We are trusted by clients in Europe, USA, Canada, Malaysia, India, South Korea, Russia, Thailand. The company " SA International " has an official representative office on the territory of the Russian Federation, in the city of Krasnodar to simplify cooperation, document circulation and customs clearance for our clients. Cooperating with our company, you can be confident not only in the quality of the supplied equipment, but also in the after-sales service.    We provide:   - Machinery and equipment for the construction industry, such as:Asphalt concrete plants / plants (ABZ), concrete mixing plants / plants (BRU / RBU), self-propelled concrete mixers with self-loading function, concrete pumps, lines for the production of tiles and blocks, etc.   - Equipment for mining: crushers, screens, screens, conveyor belts, pumps, etc.   - Alligator scissors and metal presses.   - Cargo and wheeled vehicles: loaders, excavators, bulldozers.   - Storage equipment.   - DES and electric motors.   - Chemical reagents and components.   Also, "SA International" is a manufacturer of conveyor belts.   Over the years of working with factories in China, we have earned a reputation as a reliable partner and a center of excellence for quality assessment among our customers. Our managers will conduct a full market assessment, advise you on all emerging issues, provide complete information as soon as possible, and engineers will monitor the entire production process to minimize the percentage of defects and will train your staff.   An additional advantage of working with us will be that the managers of "SA International" know all the logistics processes, offer competitive prices and the shortest delivery times.

Model JDM4Z Axis 4 Milling mode Dry Millable material Zirconia, Wax,PMMA Product type Crown,Coping, Bridge, Inlay/onlay Max spindle speed 60000 RPM/min Spindle power 1.5 KW Spindle cooling Water cooling Rotation range A: ±360° Number of tool housed 3 Tool change and check Fully Automatic Compatible compressed air 0.7 MPa Loadable workpiece shape DiskDisk diameter: 98 mmThickness: ≤22mm(max) Input Voltage Single phase 220V 50Hz/60Hz Machine Total Power 3KW Average milling time(dental crown) Zirconia: 8-12 minWax: 2-5min External dimensions 610*610*590 mm Weight 200 KG

Materials Zirconia/Glass/Ceramic/Composites/Wax and PMMA Typesetting Software Hyperdent / worknc configuration Dry&Wet Shank dimater 3.175mm Weight 230kg Power Power Dimensions W*H*D 760*620*850mm

Product Description   Compact size is ideal for any lab environment Capable of unattended 4-axis milling with simple one-button operation Precision milling of wax, zirconia, nano composites and PMMA Integrated air flow system keeps work area clean Diagnostic notification system alerts user of machine status CAM software included   Distinguishing Features Mills wax, zirconia, PMMA and resins in standard blocks and pin-types Combines simultaneous 4-axis milling with simple one-button operation Automatic tool changer with two tools for unattended milling Mill up to four different pin-type materials simultaneously with an optional multi-pin clamp Multicast connection of up to four DWX dental mills to one computer CAM software included   Powerful Production Capabilities The DWX-4 includes an automatic tool changer for two tools, and can be enhanced with the addition of an optional 4-position automatic tool changer which supports up to four different tool sizes. With an optional multi-pin clamp, the DWX-4W can mill up to four prosthetics in a single production run. The additional multi-pin clamp mills different pin-type materials simultaneously and saves time, labor and costs. Peace of Mind, Quality and Reliability Roland milling devices combine unbeatable performance with legendary Roland reliability and quality assurance. As further proof of our unmatched reliability, Roland offers a one-year warranty and the best post-sales support in the industry, with a team of certified service engineers that keep your DWX-4 running smoothly.Like all Roland DG products, each DWX-4 was manufactured at a state-of-the-art factory by a single assembler, one device at a time – just like a Rolls Royce. Roland DG’s international ISO certification is your further assurance of premier quality.   DWX-4 Milling Machine Specifications Cuttable Material Zirconia (pre-sintered), Wax, PMMA, Lava™ Ultimate Restorative Loadablework – piece shape Block Width x Depth: 76×38, Height: 10 to 22 mm PIN type Width x Depth x Height: Maximum 85 x 40 x 22 mm Operating speed XYZ axis: 0.24 to 70.8 in./min. (6 to 1800 mm/min.) Spindle motor Brushless DC motor Spindle speed 6,000 to 30,000 rpm Rotary axis travel angle A: ±360° Number of tools housed 2 Attachable tool Shank diameter: 4 mm, Length: 40 to 55 mm Compatible compressed air 0.02 to 0.2 MPa Interface USB (compliant with Universal Serial Bus Specification Revision 1.1) Control command set RML-1, NC code Power requirements Voltage and frequency: AC100 to 120 V/220 to 240 V ±10 %, 50/60 Hz   (overvoltage category II, IEC 60664-1) Required power capacity: 2.0 A (100 to 120 V)/1.0 A (220 to 240 V) Power consumption Approx. 70 W Operating noise During operation: 70 dB (A) or less (when not cutting) During standby: 40 dB (A) or less External dimensions Width x Depth x Height: 13.4×14.4×16.0 in.   (340×365×405 mm) Weight 48.5 lbs (22 kg) Installation Environment Indoor Use, altitude: up to 2000 m Temperature: 41 to 104 °F (5 to 40 °C) Relative humidity: 35 to 80 % (no condensation) Ambient pollution degree: 2 (as specified by IEC 60664-1) Short-Term Temporary Overvoltage: 1440 V Long-Term Temporary Overvoltage: 490 V Included items Power cord, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc. System requirements for included EasyShape CAM software Operating System Windows 7 or Windows 8.1 (32 or 64 Bit) Recommended CPU i7 or better *AMD not recommended Memory (RAM) 4GB or more   *More RAM may be required if running multiple instances of EasyShapeCAM 4GB of RAM will require a 64-Bit OS

Product Description   Cut precision graphics from vinyl, window tint, twill, sandblast mask and more 30″, 40″, 54″ and 64″ models available Roland CutStudio software included to get started right out-of-the-box Combining precision and performance with Roland’s legendary reliability, CAMM-1 Pro GX Series vinyl cutters are the ideal choice for contour cutting a wide range of materials, including vinyl, heat transfers and printed graphics. With speed, accuracy and powerful downforce, GX vinyl cutters deliver the unstoppable performance and outstanding results busy shops need to produce high-quality signs, apparel, vehicle graphics and more.   Distinguishing Features 36”, 46”, 54” and 64” models available Cut at up to 33 inches per second with high-precision Max down force of 350 grams CutStudio software included GX-640 includes overlap cutting to enable cutting of thicker substrates such as diamond-grade reflective vinyl Three-Year Warranty   More Power, Finer Details GX vinyl cutters use digital servomotors for maximum accuracy and cutting speeds up to 33 inches per second. These professional-grade cutters also feature a curve-smoothing function that allows precise cutting of fine details, even at high speeds. Downforce of up to 350 grams ensures high cutting performance even on thicker substrates. The result is faster production and better-looking graphics on a wide variety of materials, day-in and day-out.   CutStudio Included Bundled with any GX Series cutter, Roland CutStudio software allows designers to quickly and easily enlarge, reduce, re-position, rotate and mirror images. BMP, JPG, STX, AI, and EPS file formats are all supported. Optional Film Design Packed with design features, Film Design supports all brands of automotive window film, offering access to more than 2,000 window film pattern kits for use with over 1,000 different vehicles.   Even More Advanced Features Included with the GX 640 OVERCUT for perfect corner cuttingThe GX-640 easily cuts vinyl and polyurethane materials, plus a myriad of textile fabrics for decorated apparel. The OVERCUT feature cuts thicker materials by adding a margin of 1mm to the beginning and end of a vector. This ensures precise corners and accurate cuts.OVERLAP for cutting thicker materialsFor the thickest and most difficult materials, the GX-640 offers an OVERLAP feature that can cut the same graphic up to 11 times, applying steady pressure for precise, complete cuts. Three-Year Trouble-Free Warranty Roland offers unmatched reliability and support with the best post-sales care in the industry and an unprecedented Three-Year Trouble-Free Warranty included with all GX cutters. Roland DG proudly holds international ISO certifications as recognition of exceptional quality.   MODEL GX-300 GX-400 GX-500 GX-640 Cutting method Media-movement method Driving method Digital control servo motor Friction feed/Digital control servo motor Maximum cutting area 29 x 984-1/8″(737 x 24,998mm) 39 x 984-1/8″(1000 x 24,998mm) 47 x 984-1/8″(1195 x 24,998mm) Width: 65″ (1651 mm) Acceptable media width 2 to 36″(50 to 915mm) 3-1/2 to 46″(90 to 1178mm) 3-1/2 to 54″(90 to 1372mm) 5-1/16″ to 72.5″ (130 mm to 1842 mm) Maximum cutting speed During cutting: 33ips (850mm/sec.) [in all directions]During tool-up: 47 ips (1202mm/sec) [in 45º direction] During cutting: 33.5″/sec (850 mm/sec) (in all directions)During tool-up: 47″/sec (1202 mm/sec) Cutting force 20 to 350 gf 1 to 85 cm/sec (in increments of 1 cm/sec), 20 to 350 grams force (increments of 10 grams) > Mechanical resolution 0.00049″/step (0.0125mm/step) 0.000137″/step (0.0035 mm/step) Software resolution 0.00098″/step (0.025mm/step) 0.000984″/step (0.025 mm/step) Distance accuracy Error of less than ± 0.2% of distance traveled, or 0.00039 (0.1mm), whichever is greater Error of less than 0.2% of distance traveled, or 0.00394″ (0.1 mm), which is greater Repetition accuracy 0.1mm or less (excluding stretching/contraction of the material)Range for assured repetition accuracyFor materials with a width exceeding 24″ (610mm): Length 157-7/16″ (4000mm) (GX-400/500 only)For materials with a width of 24″ (610mm) or less: Length 314-15/16″ (8000mm) 0.004″ (0.1 mm) or less Interface Serial (RS-232C compatible), USB (Rev. 1.1) Serial (RS-232C-compatible), USB (Rev 1.1) Buffer size 8MB (2MB for re-plot buffer) 2 MB (buffer size: 8 MB) Power supply AC 100V to 240V +/- 10% 50/60Hz 1.2A AC 100V to 240V =/- 10% 50/60Hz 1.1A AC 100V to 240V ±10% 50/60Hz 1.2A Power consumption Approx. 95W Approx. 100WApprox. 100W Acoustic noise level Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779)   Dimensions with stand 45-1/16(W) x 28-5/8(D) x 43-13/16″(H)1144(W) x 727(D) x 1113mm (H) 55-3/8(W) x 28-5/8(D) x 43-13/16″(H)1407(W) x 727(D) x 1113mm(H) 63-1/16(W) x 28-5/8(D) x 43-13/16(H)1602(W) x 727(D) x 1113mm (H) 83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in (2155 (W) x 727 (D) x 1113 (H) mm) Weight with stand 97lb. (44 kg) 112.4lb. (51 kg) 121.2 lb. (55 kg) 141.1 lb (64 kg) Operating temperature 41 to 104F (5 to 40C) Operating humidity 35 to 80% (non-condensing) Standard accessories Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife,  Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10/11/12 and Adobe Illustrator 9/10/CS), startup guide, user manual Power cord, blade holder (XD-CH2), pin, blade, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user’s manual

High-yielding blueberry variety. The height of the bush is up to 1.5 meters.

O.P.U. Drape Pack

Thoracic Pack