Construction Machinery & Equipment in bulk on Qoovee

Russian Specialized vehicles, without miles on, from storing (Crane-vehicles without crane levers, chassis only). Photos only for reference.

Manufacturer: PTK PTC RILON MIG 180 GDM is an updated line of machines for semi-automatic welding, which is produced at the RILAND plant. Manufactured using high quality power IGBT transistors. The use of advanced inverter technologies has increased the efficiency up to 80% and increased welding productivity by 30%.Features:Modern welding digital semiautomatic device for welding in shielded gases with synergetics. Synergic welding control settings allow you to select the optimal parameters for welding current, arc length and inductance. This takes into account the type and composition of the shielding gas.MIG mode for welding in carbon dioxide MIG / CO2 and in a welding mixture Ar / CO2 MIG / MIX.Choice of 2-stroke and 4-stroke welding torch operating modes. The function is applicable when welding short or long seams. Additional function for TIG LIFT TIG welding. Allows the use of tungsten electrodes with a diameter of 1.0 to 4.0 mm.Additional function of manual arc welding MMA. Allows the use of coated electrodes with a diameter of 1.5 to 5.0 mm.In MMA mode, there is a function for limiting the open-circuit voltage. VRD reduces source idle when mains short-circuited for safe operation.The digital display allows for precise parameter setting.Thermal protection function with overheating indication.Equipment:Inverter semi-automatic welding machine - 1 pc.Semi-automatic burner 15 series - 1 pc.Grounding terminal - 1 pc.

Manufacturer: Svarog The PRO MIG 200 (N229) series machine is designed for semi-automatic welding in shielded gases (MIG / MAG), flux-cored wire (FCAW), as well as manual arc welding with coated electrode (MMA) and argon arc welding (TIG) *.Key features:Synergic control systemReversal of current polarity, flux-cored wire weldingDry wire run and test gas purgeAluminum weldingWelding modes 2T and 4TMMA welding with Arc Force functionTIG weldingVRD functionCompact dimensions, low weight

Manufacturer: Svarog The PRO TIG 200 P DSP AC / DC (E201) series machine is designed for professional AC and DC argon arc (TIG) welding and for manual arc welding (MMA). In TIG mode, spot welding is possible.Key features:Touch control panelDC and AC weldingPulse and spot * weldingOperating modes 2T / 4TPolarity balance adjustmentArc afterburner control and antistick function for MMA weldingIntelligent cooling system

Manufacturer: Svarog The REAL TIG 200 P AC / DC (E20101) series machine allows high-quality argon-arc (TIG) welding at direct and alternating current, as well as in normal and pulsed mode. The inverter can also be used for manual covered electrode arc (MMA) welding.Stable operation at mains voltage from 160 VPulse welding mode with adjustable pulse frequency2T / 4T working modeHigh-quality welding from 5 AAdjustable polarity balance and AC frequency up to 250 HzAdjustable post-gas post-flow timeIntelligent cooling systemPedal connectionNAKS certificate is provided for an additional fee

Manufacturer: Svarog The PRO TIG 200 P DSP (W212) series machine allows for high-quality, comfortable argon arc (TIG) and manual arc welding with a covered electrode (MMA). In TIG mode, spot * and pulse welding are possible.Key features:Touch control panelPulse welding setupSpot welding setupMMA welding with Hot Start, Antistick functionsArc afterburner adjustment for MMA welding

Description Manufacturer: Svarog The device of the REAL CUT 45 (L207) series for plasma cutting allows fast cutting of any conductive materials: stainless and galvanized steel, aluminum, copper, brass, etc. The built-in pressure gauge allows for precise setting of the working pressureKey features:Stable operation at mains voltage from 160 VCutting thickness up to 12 mmHigh frequency arc ignitionBuilt-in pressure gaugeRobust case

Description Manufacturer: KEDR Argon-arc welding machine KEDR UltraTIG-200P AC / DC, 220V is an irreplaceable universal tool for any workshop or repair team. Pulse mode with both alternating and direct current facilitates the welding process and helps to obtain welded joints with a constant penetration depth, beautiful appearance and uniform geometric dimensions. In any operating conditions, UltraTIG-200P AC / DC will allow you to realize the most daring projects, regardless of the material being welded.FEATURES:Digital control panelNon-contact HF arc ignitionTIG welding with direct and alternating currentWide functionality of linear, pulse, DC and AC TIG weldingTIG welding with tacksSetting the downslope and post gas timeMMA welding capabilityArc Force, Hot Start and Anti Stick for MMA WeldingEQUIPMENT:TIG welding machineCable with ground terminalTIG welding torchConsumable setUser's manual

Manufacturer: Svarog The PRO TIG 200 DSP (W207) series machine allows for high-quality, comfortable argon arc (TIG) welding and manual coated electrode (MMA) welding.Key features:Touch control panel2T and 4T welding modesAdjusting the falling time of the welding currentGas post-flow time adjustmentMMA welding mode

Description Manufacturer: Svarog The REAL TIG 200 P (W224) series machine allows you to produce high-quality argon arc welding (TIG DC). Welding work can be carried out both in normal and pulse mode. The inverter can also be used for manual covered electrode arc (MMA) welding.Key features:Stable operation at mains voltage from 160 VPulse welding mode with adjustable pulse frequency: 0.2-200HzAdjustable downslope time: 0-5 sec2T / 4T working modeMMA welding with Arc Force adjustmentHigh-quality welding from 10 AAdjustable post-gas post-flow timeIntelligent cooling systemHigh frequency arc ignitionRobust case

Manufacturer: PTK PTK MASTER MIG 230 SYNERGY D88 is a modern welding digital semiautomatic device for welding in shielded gases with synergetics. The device is equipped with the additional function of manual arc welding MMA and TIG welding in a shielded atmosphere Lift TIG.Synergic welding control settings allow you to select the optimal parameters for pulses and welding current. This takes into account the thickness, properties of the metal product and welding materials - the diameter of the welding wire, the type and composition of the shielding gas.MIG and MIG SYN functionality:Gas selection: Carbon Dioxide, Argon / Carbon Dioxide Mix, No Gas for Flux Cored Wire, not applicable in MIG SYN mode.Adjusting the inductance allows you to additionally adjust the hardness of the welding arc. Choice of 2-stroke and 4-stroke welding torch operating modes. The function is applicable when welding short or long seams.Hot start in MIG mode provides easy and smooth arc striking.Wire feed speed before primary closure, which facilitates arc striking in MIG mode.Wire annealing time to facilitate re-ignition.MMA mode functionality:The adjustable arc afterburner improves the stability of the electrode burning.Hot start in MMA mode allows you to easily ignite the welding electrode by briefly increasing the welding current at the start of welding.Reduced open circuit voltage for safe operation.

Manufacturer: PTK PROFI TIG 200 P AC / DC is an updated line of PROFI devices, which operates from a 220V supply network in the range of ± 15% without derating. It is a versatile industrial TIG welding machine that is equipped with an optional manual arc welding (MMA) function.The device is designed for argon-arc welding with a non-consumable tungsten electrode at direct current (DC) of such metals as steel, nickel, copper and their alloys. Welding of aluminum and its alloys is performed on alternating current (AC). If you work in MMA mode, then for welding metals it is necessary to use electrodes with basic and rutile coating.Features:The presence of pulse welding for work with thin sheet metal. The function prevents metal from burning and deformation.2T / 4T welding torch operating modes. The function is used when welding short or long seams. Gas after welding. The purge time avoids oxidation of the tungsten electrode and protects the TIG torch and accessories from premature wear.Additional function of manual arc welding MMA. Allows the use of stick electrodes with a diameter of 1.5 to 4.0 mm.The presence of an adjustable arc afterburner, which improves the stability of the electrode burning. Significantly reduces the likelihood of unintentional arc interruption. All this affects the quality of the seam and its continuity.A remote control pedal can be connected to the unit. The remote control is not included in the package.1 year warranty.

Manufacturer: Svarog Welding machine REAL MIG 200 (N24002N) Black series “WE PRESERVE TRADITIONS. SUPPORTING INNOVATION ”was released in a unique design and in limited quantities. It differs from the standard REAL MIG 200 (N24002N) model in its stylish design and extended complete set.The REAL MIG 200 (N24002N) Black series machine is designed for semi-automatic welding in shielded gases (MIG / MAG), flux-cored wire (FCAW), as well as manual arc welding with a covered electrode (MMA).Key features:Updated case design: plastic grille on the frontAdded inductance adjustmentConvenient rubberized adjusterStable operation at mains voltage from 160 VReversal of polarity, flux-cored wireAluminum weldingDry run and afterburning of welding wireMMA weldingRobust metal wire feeder

Description Manufacturer: PTK TIG welding machine for direct current (DC) and alternating current (AC). When using the pulse mode, the device can weld in inert gases of products with small thicknesses, which prevents metal burning and deformation. The necessary settings of the device allow you to achieve high quality welding of carbon and high-alloy steels, aluminum, copper, zinc and other non-ferrous metals, and their alloys.Control of the PTC MASTER TIG 200 P AC / DC D92 device is simplified by using the cyclogram located on the front panel.Features:Adjustment of gas flow time before and after welding. The function is designed to protect the welded seam from oxidation, which is especially important for obtaining a high-quality seam.Setting the parameters of the starting current and the time of its rise to the peak value allow you to gently and smoothly ignite the arc during welding. This allows the torch to be positioned with great precision in the initial place of the weld formation, avoiding erroneous torch movements that lead to defects in the seam. Decrease time and crater current settings allow the weld to be successfully completed, creating a crater, the appearance of which is a serious defect leading to the destruction of the weld. Additional function for manual arc welding MMA, where electrodes with a diameter of 1.5 to 5.0 mm are used.

Manufacturer: KEDR DESCRIPTION:Argon-arc welding machine KEDR UltraTIG-200P AC / DC, 220V is an irreplaceable universal tool for any workshop or repair team. Pulse mode with both alternating and direct current facilitates the welding process and helps to obtain welded joints with a constant penetration depth, beautiful appearance and uniform geometric dimensions. In any operating conditions, UltraTIG-200P AC / DC will allow you to realize the most daring projects, regardless of the material being welded.FEATURES:Digital control panelNon-contact HF arc ignitionTIG welding with direct and alternating currentWide functionality of linear, pulse, DC and AC TIG weldingTIG welding with tacksSetting the downslope and post gas timeMMA welding capabilityArc Force, Hot Start and Anti Stick for MMA WeldingEQUIPMENT:TIG welding machineCable with ground terminalTIG welding torchConsumable setUser's manual

Description Manufacturer: KEDR Argon-arc welding machine KEDR MultiTIG-2000P AC / DC, 220V is able to solve the most difficult and demanding tasks of high-quality TIG and MMA welding, and its low weight and protective design make it easier to move the machine to the welding site during construction and installation.TIG-welding of aluminum and its alloys with alternating current is extremely easy due to a complete set of settings adapted to solve various problems. 3 AC waveforms, frequency and balance control, as well as the ability to control from the foot controller, allow you to easily perform TIG welding of thick-walled aluminum at high currents, and thin-walled aluminum at low currents with a sharpened tungsten electrode.Thanks to its advanced functionality, the KEDR MultiTIG-2000P AC / DC machine is suitable for welding aluminum, carbon and stainless steel, copper titanium, nickel and other alloys, being, in fact, a universal solution for almost any welding task! CEDR MultiTIG-2000P AC / DC is versatile and has a wide range of applications: installation and construction of trunk pipelines, shipbuilding and construction of yachts and boats. Small overall dimensions make it easy to move the device in hard-to-reach places, and wide functionality is perfect for welding critical welded joints and obtaining strong and beautiful welds.Russia is the birthplace of the brand.Features of the deviceDigital controlNew control panel concept: all settings in one

Pneumatic Drill Hammer ， HY18 / HY20 / Y18 / YT24 / YT28 / Y19A

Portable reciprocating air compressor ， For power supply. ， Please contact me

Improved one-piece pump. Withstand constant high pressure Quieter and easier to operate. Indicator name GK012 Weight 8.5 kg Max. Slave. Pressure 750 Operating pressure 500 Performance 0.7

QVS manufactures standard & custom hydraulic repair seal kits, hydraulic seals, pneumatic seals, o-rings (including viton, silicone, and ptfe) and oil seals for industries worldwide. Our products are available in a variety of materials to meet both high & low temperature requirements.

Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System Key words: Lip Shroud for Electric Rope Shovel, Lip Shroud for Cast Lip with V91 Tooth System   A&S Machinery Co., Ltd. supplies Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System which are applicable for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System, A&S Machinery also supply V91 bucket tooth, V91 tooth pin, V91 adapter, wedge, c-clamp, wear cap, wing shroud for electric rope shovel.   If any interest in Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System, V91 bucket tooth, V91 tooth pin, V91 adapter, wedge, c-clamp, wear cap, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

Cast Lip with V91 Tooth, Pin and Adapter for Electric Rope Shovel Key words: Cast lip with V91 tooth, Cast lip with V91 tooth, Electric Rope Shovel Cast Lip with V91 tooth   A&S Machinery Co., Ltd. supplies Cast Lip with V91 Tooth, Pin and Adapter for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides Cast Lip with V91 Tooth, Pin and Adapter, A&S Machinery also supply wedge, c-clamp, wear cap, lip shroud, wing shroud for electric rope shovel.   If any interest in Cast Lip with V91 Tooth, Pin and Adapter, wear cap, wedge, c-clamp, lip shroud, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

V91 Bucket Tooth Adapter for Electric Rope Shovel Key words: V91 Bucket Tooth Adapter, V91 electric shovel tooth adapter, V91 c-clamp    A&S Machinery Co., Ltd. supplies V91 Bucket Tooth Adapter for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides V91 Bucket Tooth Adapter, A&S Machinery also supply cast lip with V91 tooth system,  V91 bucket tooth, V91 tooth pin, wedge, c-clamp, wear cap, lip shroud, wing shroud for electric rope shovel.   If any interest in V91 bucket tooth adapter, wear cap, wedge, c-clamp, cast lip with V91 tooth, bucket tooth, lip shroud, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

V91 Bucket Tooth Pin for Electric Rope Shovel Key words: V91 Bucket Tooth Pin, V91 electric shovel tooth pin, V91 bucket tooth wedge, V91 c-clamp,    A&S Machinery Co., Ltd. supplies V91 Bucket Tooth pin, wedge, c-clamp for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides V91 Bucket Tooth pin, wedge, c-clamp, A&S Machinery also supply cast lip with V91 tooth system, V91 bucket tooth, V91 adapter, wear cap, lip shroud, wing shroud for electric rope shovel.   If any interest in V91 bucket tooth pin, wedge, c-clamp, V91 adapter, wear cap, lip shroud, wing shroud, cast lip with V91 tooth system for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

V91 Bucket Tooth/Tooth Tip/Tooth Point for for Electric Rope Shovel Key words: V91 bucket tooth, V91 tooth tip, V91 tooth point, V91 electric shovel tooth   A&S Machinery Co., Ltd. supplies V91 Bucket Tooth/Tooth Tip/Tooth Point for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides V91 bucket tooth/tooth tip/tooth points, A&S Machinery also supply cast lip with V91 tooth system, V91 tooth pin, wedge, V91 adapter, lip shroud, wing shroud for electric rope shovel.   If any interest in V91 bucket tooth/tooth tip/tooth points, cast lip with V91 tooth system, V91 tooth pin, wedge, V91 adapter, wear cap, lip shroud, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

Diamond core drilling machine is one of construction tools, which comes with full copper motors, friction clutch, external carbon brush, soft starting device, overcurrent protection and other devices. It provides different rated input power, 110V / 220V / 240V rated voltage, 50-60Hz rated frequency as well as a wide range of step-less speed to allow the core drill to operate with high efficiency and stability. Besides, the diameter hole capacity from 15mm to 500mm is available for consumers to choose. The drilling machine is widely used to drill holes on reinforced concrete, rocks, brick, stone, ceramics, glass and other building materials, suitable for all kinds of building constructions indoors and outdoors, such as general plumbing, air vent and flue installs. Our diamond core drilling machines for sale at Tool.com offer high quality, factory price, free shipping and satisfying after-sales service for consumers all over the world.

This gasoline engine concrete vibrator machine at Tool.com comes with gasoline engine, flexible shaft, hose and stick head. It features 3600VPM speed No-load, is equipped with flexible shaft and the gasoline engine is powered by a 5HP Robin / 5.5HP Honda / 6.5PH Chinese petrol engine. The concrete vibrator adopts 4-10m non-loose flexible shaft, which is convenient for replacement and repair of the flexible shaft. The gasoline engine concrete vibrator has the advantages of long time service life, compact structure, low fuel consumption, simple and safe operation and reliable work. Buy the best gasoline engine concrete vibrator with 1 year warranty, wholesale price, free shipping and professional after-sale service for all consumers at where you can find more information about other kinds of concrete vibrators and other construction tools.

SUMAB R 400 ARE YOU THINKING ABOUT SETTING UP A CONCRETE BLOCK INDUSTRY BUSINESS? Scandinavian & UK Machines is here to help YOU! Our equipment is among the best in the block production industry! BLOCK PRODUCTION HAS NEVER BEEN SO EASY BEFORE! SUMAB R 400 BLOCK MACHINE IS THE MOST ADVANCED MACHINE ON THE MARKET! OUTPERFORMING YOUR COMPETITORS IS NOT A QUESTION! IT IS A FACT! THIS MACHINE WILL MAKE YOUR BUSINESS PROFITABLE LIKE NEVER BEFORE! Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm) Scandinavian quality and good price! CONTACT US FOR PRICING AND TECHNICAL SPECS! WE WILL PROVIDE YOU WITH THE BEST SOLUTION FOR YOUR BUSINESS PROJECTS!

The floating pump is designed to deliver high amounts of water, drain lagoons resulting from flooding, replenish fire engine tanks with water from outdoor natural water sources. It can also be used in other applications, such as agriculture, building sites, etc. Main specifications: Max. flow 2 400 l/min Total head 22 m Discharge connection Storz A110 (4”) Engine Honda GXV 390 Engine power 7.6 kW / 10.2 HP / 13HP (SAEJ1995) Fuel tank capacity 2.1 l Fuel unleaded petrol (BA 95) Float dimensions (L x W x H) 980 x 710 x 200 mm Device dimensions (L x W x H) 1080 x 730 x 500 mm Dry weight (empty) 53 kg Cat. number vv 287 The pump and the engine are in one unit, so the pump cannot be used independently. The engine shaft goes through the pump block without a sealing. The pump block is bolted to the engine through the supporting plate and the pump cannot be connected to any other engine type. The bottom side of the block is fitted with a cover to prevent debris and particles over 20 mm in diameter. The delivery outlet is fitted with an A 110 (4") Storz coupling. The float body is made of polyethylene by centrifugal injection as one block. The internal wall has about 20 mm of hard polyurethane foamin order to increase resistance to breakthrough which guarantees unsinkability of the device. This design of the float features outstandingstability on the water surface. The frame is used both for carrying and handling the unit and also for fixing a rope to secure it in its position.The design of the pump allows dry-running without damage. The data was measured by the accredited testing laboratory TÚPO No. 1011-2

  Caprolone production is based on the polymerization of lactam, known as aminocaproic acid, at a reduced temperature. The reaction is accelerated by the addition of alkaline catalysts and other activators. Corrosion does not threaten such sheets. No toxic substances were found in their structural basis. Products can come into contact with any food products without consequences. This fact is confirmed in the official conclusion of the SES. Polyamide-6 sheets are durable in operation and can easily withstand various loads. The material has a reduced coefficient of friction, due to which, in the process of using them as part of individual units, it is possible to refuse the use of lubricants. The main field of application of caprolon sheets is mechanical engineering. They are indispensable for renovation work. Sheets are operated at temperatures from –30 to + 90ºС. However, it should be borne in mind that they begin to melt already at 250 ° C. The main characteristics of the material: at break, the relative elongation reaches fifty percent; at a pressure of 90 units, the strength of the material is noticeably reduced. When the material is compressed and deformed by an average of 5%, the stress is 92 MPa. Rod and sheet caprolon is resistant to wear and shock loads, is not susceptible to the effects of corrosive media, and does not emit substances hazardous to health during operation and heating. Material Application: production of various parts for conveyors and machines; manufacture of dishes and products for the food industry; production of electrical and radio engineering parts; production of durable, corrosion-resistant self-lubricating bearings, as well as blades, gears and other parts for conveyors and pumps for various purposes A big plus of the material is that during operation as a part of units, it does not make a lot of noise and often does not require the use of additional lubrication. Our experts will professionally advise on the possibility of using caprolon in your equipment, select the optimal brand and size of the workpiece. In most cases, we can also help with the manufacture of finished products.

Caprolon bushings are more technologically advanced in comparison with the same items made of bronze and other metals. They do not degrade in an aggressive chemical environment, do not corrode, do not require special maintenance, damp shock loads during operation, and are suitable for use in the production and storage of food products. An important advantage of using bushings is the minimization of waste during processing. This gives an economic benefit both by reducing the costs for the material itself and for its processing. Polyamide products are cheaper than metal ones, but more durable and reliable. Our experts will professionally advise on the possibility of using caprolon in your equipment, select the optimal brand and size of the workpiece. In most cases, we can also help with the manufacture of finished products.