Construction Materials in bulk on Qoovee

The additive is intended: 1. To ensure the waterproofing of concrete and reinforced concrete structures. 2.Increases water resistance, frost resistance, concrete strength. 3. Protects the concrete structure from the effects of wastewater and groundwater, sea water, oil products, aggressive environments: acids, alkalis, etc. 4. Increases the corrosion resistance of concrete, prevents corrosion of steel reinforcement. Technical characteristics of "_BAFF 02 Gel": 1. Increasing the water resistance of concrete by at least 3 steps according to GOST 12730.5-84: - for concrete grade B20, increased water resistance from W2 to W8, - for concrete grade B30, increased water resistance from W6 to W14, 2.When increasing the BAFF 02 additive content to 2% of the cement mass in concrete B30, the water resistance index is greater than W14. 3. Increase in frost resistance to 300 cycles in accordance with GOST 26633. 4. The increase in compressive strength according to GOST 10180-90 - not less than 2.5% for concrete B30 - not less than 25% for concrete B20. The mechanism of action of functional chemical additives "BAFF 02": When BAFF 02 and BAFF 02 Gel additives are added to concrete, the chemical salts of the complex salts that make up the additive react with the calcium, aluminum and iron ions present in the concrete (concrete product) to form supersaturated solutions of insoluble complexes. In the process of concrete curing, insoluble complexes in the form of needle-shaped crystals crystallize from supersaturated solutions in the form of pores in the concrete body. Strength indicators of concrete increase. During the operation of concrete, needle crystals prevent the diffusion of water droplets through pores and microcracks (up to 0.4 mm) inside the concrete body, thereby improving the concrete's waterproof and frost resistance characteristics. Needle-shaped crystals allow excess moisture to freely exit the concrete body in the form of water molecules (the vapor permeability of concrete is preserved).

The additive is intended: 1. To ensure the waterproofing of concrete and reinforced concrete structures. 2.Increases water resistance, frost resistance, concrete strength. 3. Protects the concrete structure from the effects of wastewater and groundwater, sea water, oil products, aggressive environments: acids, alkalis, etc. 4. Increases the corrosion resistance of concrete, prevents corrosion of steel reinforcement. Specifications of "_BAFF 02" 1. Increasing the water resistance of concrete by at least 3 steps according to GOST 12730.5-84: - for concrete grade B20, increased water resistance from W2 to W8, - for concrete grade B30, increased water resistance from W6 to W14, 2.When increasing the BAFF 02 additive content to 2% of the cement mass in concrete B30, the water resistance index is greater than W14. 3. Increase in frost resistance to 300 cycles in accordance with GOST 26633. 4. The increase in compressive strength according to GOST 10180-90 - not less than 2.5% for concrete B30 - not less than 25% for concrete B20. The mechanism of action of functional chemical additives "BAFF 02": When BAFF 02 and BAFF 02 Gel additives are added to concrete, the chemical salts of the complex salts that make up the additive react with the calcium, aluminum and iron ions present in the concrete (concrete product) to form supersaturated solutions of insoluble complexes. In the process of concrete curing, insoluble complexes in the form of needle-shaped crystals crystallize from supersaturated solutions in the form of pores in the concrete body. Strength indicators of concrete increase. During the operation of concrete, needle crystals prevent the diffusion of water droplets through pores and microcracks (up to 0.4 mm) inside the concrete body, thereby improving the concrete's waterproof and frost resistance characteristics. Needle-shaped crystals allow excess moisture to freely exit the concrete body in the form of water molecules (the vapor permeability of concrete is preserved).

Waterproofing is intended: 1. To increase the indicators of water resistance, frost resistance, concrete strength on old and newly built concrete and reinforced concrete structures. It is applied on a concrete surface. 2. Protects the concrete structure from the effects of wastewater and groundwater, sea water, oil products, aggressive environments: acids, alkalis, etc. 3. Increases the corrosion resistance of concrete, prevents corrosion of steel reinforcement. 4. The penetration depth of functional additives in 60 days ≈ 0.5 m. (The speed of movement within the body of the model concrete composition is 2 ∙ 10-6 m / s at a depth of 0.1 m), therefore, partial destruction of the concrete body, with the condition that its integrity will not be able to violate the waterproofing of the concrete structure. Operating principle: The composition "BAFF.01" is applied to the internal or external surfaces of the concrete structure, regardless of the side of the influence of liquid media on the concrete object. After applying the composition, water-soluble functional additives in the form of a solution penetrate into the pores deep into wet concrete, interact with calcium and aluminum oxides, forming insoluble needle crystalline hydrates that fill capillaries, microcracks and concrete pores, which prevent water from entering the concrete body. The concrete structure becomes waterproof, the ability of water molecules to pass through the formed barriers from insoluble complex needle crystals leaves such a property as vapor permeability behind concrete. The rate of formation of insoluble crystalline hydrates filling the pores of the concrete body depends on factors such as moisture, porosity, and temperature of the concrete. After the concrete body has dried, unreacted water-soluble functional additives crystallize and remain in the pores of the concrete. In cases of localization of a new source of liquid pressure, water-soluble additives are able to re-enter the saturated saline solution and form needle-like insoluble crystalline structures, imparting a property to concrete such as self-healing Mixture preparation: 1. The dry mixture of the composition "BAFF 01" is mixed with water in a ratio of 3/1 to obtain a creamy consistency. The survivability of the composition is 20-30 minutes. 2. Apply by brush or trowel to a damp concrete surface. 3. On horizontal surfaces in one layer, on vertical surfaces it is necessary to apply 2 layers., With an interval of 2 hours. 4. The consumption of the composition "BAFF 01" 0.8-1.3 kg / m2. 4. Use in 30 minutes, stirring regularly without adding water.

production: Loop fiber: PP fiber weight: 2000 Dtex, BCF total weight of the pile: 550 g / m 2 pile height: 6 mm substrate material: UV-resistant single-layer 100% PP-woven fiber (200 g / m 2 ) longitudinal density: 40/10 cm lateral density: 1/10 inch base: Corboxylate latex SBR Latex. FP total weight: 1725 gr Total height: 7/2 mm  

Terracotta breeze blocks gives a raw natural look. Made up of natural clay. No added colours. 2.5pcs per sqft it can be coloured, scratch resistant, green product. 

Concrete designer blocks which gives a very clean natural environment.  It's burn resistant Can be coloured Scratch resistant 2.25 pcs per sqft  

ARIZONA A wide selection means great opportunities - you can find the right flooring within any budget and for any purpose. The Arizona collection uses bright colors and an unusual design that is suitable for any interior. ARIZONA production: Loop fiber: PP fiber weight: 2000 Dtex, BCF total weight of the pile: 380 g / m 2 pile height: 7 mm substrate material: UV-resistant single-layer 100% PP-woven fiber (200 g / m 2 ) longitudinal density: 47/10 cm lateral density: 1/8 inch base: Corboxylate latex SBR Latex. FP total weight: 1525 gr total height: 7/2 mm

  Kuba The idea of creating a relevant and functional design was the basis for the creation of the “ KUBA ” collection . Original drawing and color harmony will bring cosiness and warmth to your interior. Kuba production: Loop fiber: PP fiber weight: 2000 Dtex, BCF total weight of the pile: 410 g / m 2 pile height: 7 mm substrate material: UV-resistant single-layer 100% PP-woven fiber (200 g / m 2 ) longitudinal density: 42/10 cm lateral density: 1/8 inch base: Corboxylate latex SBR Latex. FP total weight: 1,555 gr total height: 7/2 mm  

MODERN When choosing a carpet, you will inevitably come across a huge variety of designs, colors and textures that make it possible to choose a unique solution for any interior. The multilevel covering of the carpet from the Modern collection creates a “sculptural” effect and gives the coating an unusual relief. production: Loop fiber: PP fiber weight: 2000 Dtex, BCF total weight of the pile: 450 g / m 2 pile height: 7 mm substrate material: UV-resistant single-layer 100% PP-woven fiber (200 g / m 2 ) longitudinal density: 42/10 cm lateral density: 1/8 inch base: Corboxylate latex SBR Latex. FP total weight: 1615 gr  

SHAGGY - DIAMOND   The products of this collection are new, large pile and high quality threads do not merge, creating a feeling of unsurpassed softness and an atmosphere of comfort in your home. Each such interior is as simple as individual, unique and unique. production: CUT fiber: PP fiber weight: 4500 Dtex, Frize total weight of the pile: 2150 g / m 2 pile height: 30 mm substrate material: UV-resistant single-layer 100% PP-woven fiber (200 g / m 2 ) longitudinal density: 29/10 cm lateral density: 1/6 inch base: Corboxylate latex SBR Latex. FP total weight: 3455 gr total height: 30/2 mm

SABAN plastic dishes

SABAN plastic dishes

Skylight! A dormer window this provides lighting and ventilation of the attic space and also makes it easy and safely go to the roof if necessary. A window for a side-opening glass roof, designed for installation of residential heated premises. two side opening options are possible (left and right). environmentally friendly product made from top quality winter harvest pine without knots. Laminated wood is impregnated with an antiseptic and coated with a water-based polyacrylic varnish, and also equipped with a double-glazed unit with two tempered glass panes, which ensures the safety, functionality and durability of the windows.

ATTIC LADDER! The attics of country houses and summer cottages often function as storage rooms. To make access to this room as convenient and safe as possible, you will need a reliable and sturdy structure. FAKRO folding or sliding wooden / steel loft ladders have all the features you need: they are reliable, safe, easy to use and very compact.

Decorative gypsum brick “Marble (Chipped)” is a classic solution modern interior. The soft, warm tones of the bricks effectively transform the walls, pleasing the eye. Decorative gypsum brick “Marble (Chipped)”, which can be bought in Kharkov, effectively decorates both the entire wall and individual parts of the room. Such walls perfectly fit into the interior of offices, photo studios, beauty salons, art galleries, etc. For the manufacture of these decorative bricks, G-10 brand gypsum is used. They can be easily mounted on the wall and are unpretentious to use. Decorative brick is a good noise insulator and does not support combustion. CHARACTERISTIC: Material: high-strength gypsum of the G-10 brand! (compressive strength 10 MPa (100 kgf / cm2)); Tile length: 210 mm; Tile height: 55mm; Tile thickness: 0.5-1.3 mm;

Seamless Steel Pipes/Tubes/Tubing Seamless steel pipes are used for general structure, mechanical structure, water wall panel, economizer, super heater, boiler and heat exchanger with seamless steel tubes, and for pipelines transmitting water, natural gas, and petroleum, etc. Our seamless pipes are available in various wall thicknesses and diameters. We are among the leading manufacturers and suppliers of SMLS steel pipes, tubes, or tubing in China, welcomed by customers in many countries of the world.   Quality Standard:  API 5L Standard Specification for Seamless Line Pipe or Seamless Pipe Line ASTM A 53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless ASTM A519 Seamless Carbon and Alloy Steel Mechanical Tubing  ASTM A106 Seamless Carbon Steel Pipes for oil pipeline and gas pipeline transportation  JIS G3441 Alloy steel tubes for machine purposes  JIS G3444 Carbon steel pipes for general structural purposes  JIS G3445 Carbon steel tubes for machine structural purposes  DIN 2391 Seamless Precision Steel Tubes  EN10305 Stainless steel pipe for precision applications. Technical delivery conditions. Seamless cold drawn tubes EN 10210: Seamless structural steel pipes   Steel Grade:  API 5L: Grade A, Grade B, X42, X46, X52, X56, X60, X65, X70, X80 ASTM A 53: Grade A, Grade B, Grade C, Type F, Type E ASTM A519: 1010-1045, 4130-4142, 5135 JIS G3441: SCM 415 TK, SCM 418 TK, SCM 420 TK, SCM 430 TK, SCM 435 TK, SCM 440 TK  JIS G3444: STKM 11A, STKM 12, STKM 13, STKM 14, STKM 15, STKM 16, STKM 17, STKM 18 STKM 19, STKM 20 DIN 2391: St30Si, St30A1, St35, St45, St52 EN10305: E235, E355  EN 10210: S235JRH; S275J0H, S275J2H; S355J0H, S355J2H; S275NH, S355NH; S275NLH, S355NLH    

Parquet board, a beautiful and high-quality ball for your home or apartment.   Coating: varnish, oil (optional) Material: European oak Thickness: 16mm. Substrate: FSF 12mm. Dimensions: 325x975mm. Area: 0.31 m2 / 1unit