Industrial Equipments and Machines in bulk on Qoovee

Tank from stainless steel buy from a manufacturer of a company with many years of experience KRAPT Horizontal tank, on supports, steel surface 2B, equipped with a hatch Delivery to the customer Visit our website

Installation "S-15" is designed for drilling water wells, geophysical, exploration, injection, horizontal wells. The rig can be equipped with a remote control panel that allows you to control drilling when the driller is in close proximity to the wellhead. It is possible to increase the mast to work with a pipe up to 3 meters. The high-quality color of the elements increases the corrosion resistance. Well drilling is carried out in a rotary way by flushing, blowing or lifting the destroyed rock to the surface with augers. The rig is designed for drilling wells in rocks of 1-9 drillability categories. When the unit is equipped with a hydraulic rotator of a geared design (maximum torque 2000, 4000 N / m), equipped with a drilling fluid supply unit for working with flushing or compressed air supply for working with a purge and with a pneumatic hammer, a swivel is not required (as in the URB). The unit can be equipped with a hydraulic auxiliary winch, hydraulic outriggers, mud pump and other equipment at the request of the customer. For ease of transportation, the "S-15" unit can be mounted on the basis of a car trailer. The installation can be placed on a category B trailer with its own OB vehicle, no re-registration with the traffic police is required. The unit is placed as a removable load. Specifications Parameter name The quantity OPERATIONAL Mach. Initial bit diameter, (mm) 300 Rock strength category nine Mach. Drilling length, (m) 100 Overall dimensions, mm: - Length - Width - Height 1000 800 3000 Installation weight, (kg) Module weight, (kg): - rotator - mast with feed mechanism - base - oil station 40 270 thirty 90

The organization accepts orders from managers of construction sites for the supply of the following types of materials: 1 In Moscow and the Moscow region: Sand, sand salt, technical salt, crushed stone, screening, cold asphalt, peat soil, expanded clay, coal. Delivery in volumes of 20m3, 25m3, 34m3 2 Across Russia: Crushed stone granite, gravel, limestone of all demanded fractions. Delivery by railway transport. 3 In the south of the Moscow region. Limestone crushed stone 20/40, 40/70. Cost - 1350 rubles / m3 with delivery (October 2018) 4 Self-call. Quarry sand. Cost 250 rubles / m3 To calculate the total cost of the order, please indicate the information: Name of the required material Volume of material Requirements for the material (fraction, strength grade, group) Possibility (or lack of possibility) of round-the-clock acceptance of cargo Possibility of travel for Tonars (large-capacity vehicles) Payment form ( cash, bank transfer) Terms (or day) of delivery Delivery address Customer's email Customer's phone number We invite you to contact us by email.

The organization accepts orders for the delivery of coal in Moscow and the Moscow region. Delivery in volumes of 20m3, 25m3, 34m3 We also deliver building materials to construction sites: 1 In Moscow and the Moscow region: Sand, sand salt, technical salt, crushed stone, screenings, expanded clay, cold asphalt, peat soil. 2 Across Russia: Crushed granite, gravel, limestone of all demanded fractions. Delivery by railway transport. 3 In the south of the Moscow region. Limestone crushed stone 20/40, 40/70. Cost - 1350 rubles / m3 with delivery (October 2018) 4 Self-call. Quarry sand. Cost 250 rubles / m3 To calculate the total cost of the order, please indicate the information: Name of the required material Volume of material Requirements for the material (fraction, strength grade, group) Possibility (or lack of possibility) of round-the-clock acceptance of cargo Possibility of travel for Tonars (large-capacity vehicles) Payment form ( cash, bank transfer) Terms (or day) of delivery Delivery address Customer's email Customer's phone number We invite you to contact us by email.

COTTON DOTTED GLOVES WITH RED WRIST - 12-OZ

COTTON DOTTED GLOVES WITH RED WRIST - 10-OZ

COTTON DOTTED GLOVES WITH RED WRIST - 08-OZ

Heavy duty fixed wheel support (polyurethane) 200 mm is intended for use in the production of wheelbarrows and trolleys for heavy loads. The wheel rim of the 200 mm heavy duty wheel support is based on cast iron. Fixed wheel bearings can be used in any conditions, perfectly tolerate the effects of the external environment and various chemicals, withstand temperature differences from -35 to +50 degrees. A fixed wheel bearing (polyurethane) is used where there is a need to restrict the mobility of a cart or wheelbarrow with a load. The presence of a nipple for regular lubrication will ensure long life and smooth running of the heavy duty wheel set. The fixed wheel bearing is equipped with a roller bearing. The wheel support bracket is made of steel and galvanized. Diameter of heavy duty fixed wheel (D) - 200 mm Tire width of heavy duty wheel (N) - 50 mm Height of heavy duty fixed wheel support (H) - 237 mm Width and length of the platform of the heavy-duty support, taking into account the holes (XxY) - 135x105 mm Width and length of the platform of the heavy-duty support at the centers of the anchorages (AxB) - 88x75 Hole sizes for heavy-duty wheel support (bxl) - 11x20 mm Permissible wheel load - 350 kg

Heavy duty swivel castors (polyurethane) 100 mm are used in wheelbarrows and trolleys for transporting heavy loads. Cast iron is used as the basis for the production of a rim for a heavy duty swivel wheel. The axle mechanism of the polyurethane caster is equipped with a roller type bearing. Heavy duty wheel support 100 mm is made of steel and galvanized (layer not less than 6 mm). The swivel caster (polyurethane) is equipped with a nipple for regular lubrication, which ensures a long service life of the caster. The permissible temperature limits for heavy-duty wheel bearings ranges between -35 gr. and + 50 gr. Diameter of the heavy duty wheel of the swivel support (D) - 100 mm Tire width of heavy duty wheel (N) - 50 mm Height of heavy-duty swivel wheel support (H) - 130 mm Width and length of the platform of the heavy-duty support, taking into account the holes (XxY) - 135x105 mm Width and length of the platform of the heavy-duty support at the centers of the fastenings (AxB) - 88x75 Dimensions of the holes for fastening the heavy-duty wheel support (bxl) - 11x20 Permissible wheel load - 250 kg

Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. Design The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Delivery - 8 m3 / h Pump outlet pressure 16 MPa Weight-660kg European quality-Ukrainian price!  

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 up to plus 200 ° C). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Flow rate - 4.0-10 m3 / h Pump outlet pressure 10 MPa 1 year manufacturer's warranty! Order European quality at Ukrainian prices!  

Plunger metering pump units ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a solid non-abrasive phase concentration of not more than 10% by mass, with a maximum particle density of up to 2000 kg / m3, with a grain size of a solid non-abrasive phase no more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Technical characteristics of the pump НД 25/400 К 14: Feed-25 l / hour; The pressure at the outlet of the pump is 400 kgf / cm2; Hydraulic part K - steel 12Х18 Н10 Т Order a Ukrainian pump ND from the KhNZ Trading House!

Plunger metering pumps ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with a kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a concentration of a solid non-abrasive phase of not more than 10% by mass, with a maximum density of particles up to 2000 kg / m3, with a grain size of a solid non-abrasive phase not more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Specifications: Feed-25 l / hour; Discharge pressure-250 kgf / cm2; Execution of the hydraulic part K - steel 12 X 18 H10T; Order time-tested quality!

Ultrafine filter UVMILK® ULTRA is designed to reduce somatic cells in milk due to the patented arrangement of filter layers consisting of wireframe and filter fibers · Reduces the number of somatic cells in milk to Extra variety · Retain dirt from 3 micron · Ultra-fine cleaning from all mechanical impurities · Have an increased resource by bandwidth · Allow to receive Extra milk grade · Effectively filtered without the addition of harmful chemical additives (antibacterial, colorants, etc.) · Increase profits

High-performance milk filter UVMILK® is designed to increase the grade of milk by improving the microbiological and organoleptic parameters of milk · Cleans milk from mechanical impurities up to 98% · Reduces bacterial contamination · Cleans up dirt up to 5 microns · Prevents acidity · Increases heat resistance and shelf life of milk · Increases the grade of milk · Does not delay fat and protein · Increases the price for 1 liter of milk

The UVMILK® bag filters are designed to produce marketable milk by cleaning from mechanical impurities up to 10 microns. Allow to clean non-sour milk to the market. · Easy to install and change due to lack of a spring · Due to its multi-layering, it is possible to withstand 1 milking without hammering · Do not tear and do not lose milk during milking · Have a throughput of at least 2 times greater than single-layer filters · Retain fine dirt from 10 micron · Versatile, as they fit into any hull filter housings (DeLaval, WestfaliaSarge, SAC, BOU-MATIK) · Does not require frequent replacement

The UVMILK® screen is designed to capture large mechanical particles contained in milk due to two layers of filtration (perforated sheet and filter mesh) made of stainless steel: · Cleans milk from large mechanical impurities · Extends the service life and efficiency of other filtration levels · Withstands the highest temperatures · Withstands washing with chemical detergents · Used for a long time · Works without electricity costs · Easy and fast installation · Multiple use of filters

The perforated filter UVMILK® is designed to trap large mechanical particles contained in milk due to the filtering perforation made of stainless steel: · Cleans milk from large mechanical impurities · Extends the service life and efficiency of other filtration levels · Withstands the highest temperatures · Withstands washing with chemical detergents · Used for a long time · Works without electricity costs · Easy and fast installation · Multiple use of filters

The UVMILK® filter housing is made of high quality Italian stainless steel AISI304. All metal is certified. • Disassembly takes less than 1 minute • No special tools are needed to replace the filter element • Mobile, ergonomic body design • Various types of connections (DIN / SMS, clamp, union) • Different diameters of nozzles • Possibility of special orders • There are no right angles in the hull design • All angles greater than 90 ° (This prevents the accumulation of dirt and bacteria inside the housing) • Internal transitions of surfaces are made by radius Rα = 0,8 • There are no external weld seams • All surfaces of the body are ground • The case is completely collapsible • Clamp connection of the housing cover • Guaranteed no cracks in welding • All dimensions are observed up to 0.01 mm • Silicone seals seal the housing and prevent the flow of milk • Steel does not rust, does not change shape, thick shell walls do not deform when exposed