Open chat

Industrial Equipments and Machines in bulk on Qoovee

USD 0.82/pcs 0.82
Toggle switch 3A / 250VAC, solder contacts. DPDT type (two-position, two contact groups), ON-ON operation algorithm. Insulation class IP40.
USD 4.28 - 7.57/pcs
Multi-button electric pendants are designed for remote control of production processes. The remotes are made of plastic.
USD 3.01 - 6.41/pcs
Electric joysticks are designed for remote control of production processes. Models presented are left / right, left / right / up / down, with fixation in a given position and with a return to the middle position.
USD 4.83 - 58.82/pcs
Pedal switches (foot switches, buttons, pedals, electric pedals, machine pedals, machine pedals) are designed to control automation systems and CNC machines in production. Models are available in various sizes and numbers of pedals.
USD 4.9/pcs 4.9
Limit switches 10A / 250VAC. The maximum mechanical switching frequency is 120 switch / min. Depreciation - more than 1 mln. switching. Insulation class IP65. Working temperature -10 ... + 80 ° C, humidity <85%.
USD 1.95/pcs 1.95
Buttons on the dashboard for controlling automation systems and CNC machines in production. Single-phase and two-phase models are presented. With fixation, key and without.
USD 4.9/pcs 4.9
Ferrite filter for suppressing noise in signal and power lines (sensor wires, computer cables, power cables, etc.). Method of application - install a filter on the cable or make one loop of the cable through the filter.
USD 4.09/pcs 4.09
Ferrite filter for suppressing noise in signal and power lines (sensor wires, computer cables, power cables, etc.). Method of application - install a filter on the cable or make one loop of the cable through the filter.
USD 2.45/pcs 2.45
Ferrite filter for suppressing noise in signal and power lines (sensor wires, computer cables, power cables, etc.). Method of application - install a filter on the cable or make one loop of the cable through the filter.
USD 2.76 - 8.83/pcs
Signal industrial connectors (USB, Ethernet) with latching are designed for use in CNC machines and automation systems. The connectors provide reliable electrical connections. The connectors are mechanically locked to prevent disconnection.
USD 58.17 - 77.58/pcs
Incremental optical encoders OMRON (Japan) with a hollow shaft are installed on electric motors or rotating joints, shafts, gear screws to determine the angular position. They are used when creating a servomotor from a conventional electric motor (stepper, brush, brushless, etc.). Models with different resolutions, bore diameter and type of output (open collector, voltage output, differential output - line driver AM26LS31) are presented.
USD 29.09 - 42.02/pcs
Incremental optical encoders OMRON (Japan) with a shaft are installed on electric motors or rotating joints, shafts, gear screws to determine the angular position. They are used to create a servo motor from a conventional electric motor (stepper, brush, brushless, etc.). Models with different resolutions, bore diameter and type of output (open collector, voltage output, differential output - line driver AM26LS31) are presented.
USD 34.0/pcs 34.0
Incremental optical encoders are mounted on electric motors or rotating joints, shafts, gear screws to determine the angular position. They are used when creating a servomotor from a conventional electric motor (stepper, brush, brushless, etc.). Models with different resolutions, bore diameter and type of output (open collector, voltage output, differential output - line driver AM26LS31) are presented.
USD 81.02/pcs 81.02
Optical incremental encoders with a measuring wheel are designed for length measurement. Models with different resolutions, bore diameter and type of output (open collector, voltage output, differential output - line driver AM26LS31) are presented.
USD 16.35/pcs 16.35
Encoders MPG (manual pulse generator) are designed for manual movement control in a CNC machine. The MPG encoders are incremental optical encoders with handle and vernier. Models with different resolutions and output types are presented (open collector, voltage output, differential output - line driver AM26LS31).
USD 7.68 - 8.72/pcs
Measuring current transformer - a transformer designed to convert current to a value convenient for measurement. The primary winding of the current transformer is connected in series to the circuit with the measured alternating current, and the measuring instruments are connected to the secondary. The current flowing through the secondary winding of a current transformer is proportional to the current flowing in its primary winding.
USD 4.34/pcs 4.34
Float switch type 6. 250V (50Hz), 16 / 4A (at resistive load / at reactive load), IP68, depth 20m max. Cable length 2m. Sinker included.
USD 4.34/pcs 4.34
Şamandıralı anahtar tipi 2. 250V (50Hz), 16 / 4A (dirençli yükte / reaktif yükte), IP68, derinlik 20m maks. Kablo uzunluğu 2m. Sinker dahildir.
USD 4.87/pcs 4.87
Float switch type 1. 250V (50Hz), 16 / 4A (at resistive load / at reactive load), IP68, depth 20m max. Cable length 2m. Sinker included.
USD 5.72/pcs 5.72
End sensors of magnetic type (reed switch), sealed, in a plastic case. Fired by a magnet. Can be mounted on metal and triggered through metal. Normally open (NO) and normally closed (NC).
USD 17.17 - 21.25/pcs
Optical sensors, sealed, in a metal case. Barrier (T, reception of a beam from a free-standing emitter), reflex (R, reception of a beam reflected by a reflector) and diffusion (D, reception of a beam, diffusely reflected by an object) sensors are presented. Normally open (NO) and normally closed (NC).
USD 7.36 - 8.17/pcs
End sensors of inductive type, sealed, in a metal case. Fired by steel, aluminum, copper, bronze, lead, etc. Normally open (NO) and normally closed (NC).
USD 6.54 - 9.81/pcs
End sensors of inductive type, hermetically sealed, in a plastic case. Fired by steel, aluminum, copper, bronze, lead, etc. Normally open (NO) and normally closed (NC).
USD 6.54 - 24.38/pcs
Electric cooling fans with a supply voltage of ~ 220V, rolling bearings are installed (unless otherwise specified), the casing is made of aluminum alloy. Designed to provide forced ventilation of control cabinets and blowing of cooling radiators for electronic control units of CNC machines and automation systems. Models are available in various sizes and capacities.
USD 3.85 - 26.73/pcs
Electric cooling fans with 12V supply voltage, roller bearings (unless otherwise specified), plastic housing. Designed to provide forced ventilation of control cabinets and blowing of cooling radiators for electronic control units of CNC machines and automation systems. Models are available in various sizes and capacities.
USD 48.18 - 154.0/pcs
Asynchronous electric motors AIR (formerly 4A, 4AM) with a squirrel-cage rotor, due to their simple design, lack of moving contacts and high maintainability, are used to drive ventilation equipment, pumps, compressor units, machine tools, escalators, etc. Execution IM2081 (foot mounted with end shields and flange on the drive side). Star or delta connection of windings.
USD 23.71/pcs 23.71
Frequency tachometer with relay output 3A / 220V and programmable alarm. Measuring frequencies 0.1-5000Hz and speed 6-9999RPM. Display 4 characters. Dimensions 48x98x100mm. Weight 0.33kg.
USD 42.51/pcs 42.51
Temperature controller with relay output 3A / 220V and 2 programmable alarms. Universal TC and RTD thermocouple input, PID temperature control algorithm with auto tuning. RS-485 Modbus RTU. Dimensions 72x72x100mm. Weight 0.34kg.
USD 22.89/pcs 22.89
A specialized temperature controller for a refrigeration plant or warehouse with three relay outputs 10A / 220V and 1A / 220V. Control of heater, refrigeration compressor, ventilation and lighting. Manual and automatic heating and cooling functions. Includes two thermocouples. Dimensions 36x72x86mm. Weight 0.25kg.
USD 41.69/pcs 41.69
Digital metering panel for sensors. Tc, RTD, voltage or current inputs. Display 4 + 4 characters. Correction of decimal point position, scale, measuring range and zero. 2 programmable alarm outputs, RS-485 Modbus RTU. Dimensions 48x96x100mm. Weight 0.3kg.
USD 29.43/pcs 29.43
Digital metering panel for sensors. Voltage input 0 ... 10V or current 4 ... 20mA. Display 4 + 4 characters, -1999 ... 4000 MAX. Correction of decimal point position, scale, measuring range and zero. 2 outputs of programmable alarm with hysteresis. Dimensions 48x96x100mm. Weight 0.45kg.
USD 19.62/pcs 19.62
Digital measuring panel for linear sensors. Voltage input 0 ... 10V. Display 4 characters, 1999 MAX. Correction of decimal point position, scale, measuring range and zero. Performance - 2.5 measurements per second. Dimensions 48x96x70mm. Weight 0.26kg.
USD 85.11/pcs 85.11
BLDC motor driver 50V / 15A. Reverse and braking control. Speed control with potentiometer, analog voltage input or PWM. Speed signal output - frequency, alarm output. Protection against short circuit of the stepper motor windings, against the back EMF of the motor. Designed for BLF series engines.
USD 100.88/pcs 100.88
BLDC motor driver 50V / 15A. Reverse and braking control. Engine management with and without Hall sensors. Speed control via an analog input using a potentiometer. Speed signal output - frequency, speed indication. Designed for BLM series engines.
USD 61.31/pcs 61.31
36V / 8A BLDC motor driver. Reverse and braking control. Engine management with and without Hall sensors. Speed control via an analog input using a potentiometer. Speed signal output - frequency. Designed for BLM series engines.
USD 74.98/pcs 74.98
The PLZ025 module is designed for power regulation (~ 220V, up to 2 kW) in the load. Built-in soft start function, power control method - FIM. Designed to adjust power both in resistive loads (heating elements, incandescent lamp) and reactive loads (electric motors). A simistor is used as a control element. Voltage control 0 ... 10V, from the PLP-D1 or RS485 control panel. Galvanic isolation of control circuits.
USD 24.52/pcs 24.52
Capacitor block 120V 10`000 mkF for additional filtering of supply voltage in power supply systems of CNC machines and automation systems.
USD 90.73/pcs 90.73
Rectifier (80V / 15A) with microprocessor control is designed to build power supplies using a transformer. The unit has built-in protection against load short-circuit, overvoltage and built-in DCDC converter 12V. The set includes an electrolytic capacitor 10`000μF / 120V.
USD 17.98/pcs 17.98
The damper is designed to protect the stepper motor drivers and power supplies from the back EMF generated by the stepper motor during sudden braking / acceleration. It is strongly recommended to use the module in any systems using stepper motors. The module is designed to work with power sources 10-80V, current up to 15A. The module allows connecting 1-4 stepper motor drivers.
USD 17.98/pcs 17.98
The damper is designed to protect the stepper motor drivers and power supplies from the back EMF generated by the stepper motor during sudden braking / acceleration. It is strongly recommended to use the module in any systems using stepper motors. The module is designed to work with power sources 10-80V, current up to 15A. The module allows connecting 1-4 stepper motor drivers.

The official Qoovee website helps you make profitable deals, find a supplier and manufacturer to grow your business. In the “Directory of suppliers” section you can find for yourself everything you need: Industrial Equipments and Machines from Russia, Kyrgyzstan, Kazakhstan, Turkey, Ukraine and other countries. Product categories are constantly updated. Wholesale suppliers are looking for wholesale purchases and partnerships and are ready for mutually beneficial cooperation.

Write to us, we are online!