Industrial Equipments and Machines in bulk on Qoovee

Tipping boiler MZ-2S-244b (with a stirrer) wholesale from the producer of JSC Dagprodmash. We invite dealers. Designed for cooking and evaporation of vegetable and fruit masses in the production of canned food, cereal products, concentrates, for boiling raw materials under temperature exposure. It is used in the canning industry. The Dagprodmash plant produces cooking boilers with a one-piece forged copper bowl, as well as stainless steel. Cooking boilers, depending on the model, are equipped with a mixing or tilting device. We are manufacturers of boilers, cooking and vacuum apparatus, production lines for the food industry - confectionery, canning, cheese making. Our products are manufactured from stainless steel. Some types of digesters (28-2A and D9-41A) are endowed with a copper bowl, which are made by hand.

Testing machines (tensile) RMG-MG4 - for testing samples of metals, reinforcing steel, sheet and round rolled products in tension / compression / bending. Modifications: for 500/300/200/100/50 kN. Normative documentation for testing: GOSTs 1497, 10922, 12004, 14019, 6996, etc. Design options: RMG-500MG4 are made in the form of two parts - a loading unit and a control cabinet. The rest of the modifications are monoblock. Work - from the network 220V / 50Hz. RMG-200MG4, RMG-300MG4 and RMG-500MG4 are supplied with a control panel for gripper drives (included in the price). The user enters the test data on the monitor panel in a dialogue mode, the data obtained during the test is stored in the machine's memory and can be transferred to a computer via a USB port.

Dynamometers electronic DM-MG4 are certified as standards of the 2nd category and are used for checking presses and testing machines in metrological centers. In scientific and testing laboratories, universities they are used in test benches - where an accurate measurement of force is required. The devices consist of an electronic unit and a sensor, a feature of the dynamometers are two modes of power supply: autonomous (batteries) and a 220 V network. The electronic unit has a large backlit display, the results are displayed on the screen and stored in the device's memory. The PC communication program transfers data to the PC via the USB port. It is not necessary to send the device to the manufacturer for updating - there is a program for remote updating of service functions.

The impeller pump can be used to pump a wide range of liquids in the chemical, cosmetic, pharmaceutical, dairy, canning, confectionery, oil and fat industries, etc. The impeller pump is designed for pumping thick, liquid masses with a viscosity of up to 20 Pas with permissible inclusion of air and solid particles. Due to the positive displacement principle, the pump can be used as a metering unit. Advantages of the impeller pump: Wide range of applications in various fields Can be used as a dispenser Pumping liquids, emulsions, suspensions containing small particles, such as pieces of berries, while maintaining their structure The flow path is made of high quality stainless steel, and the impeller can be made of both conventional and oil-free materials Fast, simple and inexpensive maintenance High performance in a small footprint

Tornado wheel washers operate in automatic mode and are intended for car service enterprises. Equipped with water heating function (optional). The wheels are installed in a vertical position, which eliminates the possibility of damage. Does not require connection to water supply and sewerage. Technokar LLC offers a choice of 3 models.

Pendulum tenoning machines DOS-ShR (50-500) for the production of box tenons. Designed for cutting rectangular spikes in plywood, wood, chipboard, fiberboard, plastic, etc. in the manufacture of containers, hives, boxes, furniture, elements of corner joints of wooden structures, etc. The thorns to be cut are rectangular. The processing method is step by step. The processing width in one stroke of the unit is from 50mm (DOS-ShR-50) to 500mm (DOS-ShR-500). The greatest length of the workpiece - up to 3000mm The maximum length of the workpiece is not limited. Desktop / floor version, 220 / 380v

The OFP-800 (300-1200) etching printing press is made for use in art printing. To eliminate distortions during printing, two clamps are installed along the edges of the rollers. The machine is equipped with a stand with wheels. During transportation, the stand is removed to reduce the size of the equipment. When assembling, exclusively Russian components are used, which increases the reliability of the machine and, if necessary, facilitates repair Only sealed bearings of increased accuracy and durability; To create optimal pressing pressure when printing on various materials and to eliminate possible distortions during printing, instead of one central clamp, two screw clamps are installed at the edges of the shafts; A gear reducer of increased load and reliability is designed to create increased pressure for special types of printing (so-called intaglio printing); Electromechanical feed ensures smooth running of the taler and high productivity of the machine. It can be equipped with a frequency regulator to ensure shuttle printing and select the optimal printing speed; High-precision balanced shafts that provide an optimal contact area when printing on various materials; Collapsible stand to reduce the size of the machine during transportation; The stand can be equipped with wheels for easy movement of the machine to any place convenient for work; - Only domestic widespread materials and components are used to ensure increased reliability and maintainability.

Electric cargo lift. Warehouse, construction, sidewalk, restaurant, laundry, store, sidewalk, production, mine, instead of an elevator in the elevator shaft. We offer simple and inexpensive stationary lifts for shops, warehouses, manufacturing enterprises. Developed and manufactured individually. Possible lifting height up to 40 meters, lifting capacity up to 5 tons.

We will make restaurant elevators. They are cargo lifts with a number of features. Elevator cabins of this kind are made of materials that meet the necessary requirements for sanitary and hygienic standards, for example, high-quality stainless steel. Lifts (elevators) with the above qualities can be installed in restaurants, cafes, sanatoriums and boarding houses, in catering establishments, in laboratories and medical institutions. The design and manufacture of lifts (elevators) for restaurants is carried out on the basis of ready-made and proven solutions made by the company "Liftremont". However, for each Customer we choose an individual approach and can offer non-standard solutions for the economically optimal implementation of a specific product (elevator, elevator).

Disinfection barrier is a technical installation designed for the disinfection of vehicles and is used for contactless treatment of vehicles at the entrance to the territory of poultry farms, livestock complexes, dairies, and other enterprises with increased requirements for hygiene. Specifications Purpose: disinfection and vehicle washing Frame dimensions (l × h): 4420 × 5140 mm Number of nozzles: 15 High pressure unit: 380 V, 11.0 kW High pressure unit: 380 V, 11.0 kW Disinfection operation: 15 l / min, 20 bar Washing operation: 30 l / min, 180 bar

The VISUAL MASTER visualization and level control system is a combined and absolutely universal system for monitoring the filling level of containers with liquid and bulk materials. This system can be adapted to the needs of any enterprise. The system is designed: Continuous automatic measurement of the level and temperature of media in tanks; Calculation (depending on the design options): The volume of the product in each tank; The total volume of the product in the tank farm; Free volume in each tank and tank farm; Product masses in each tank and tank farm; Vapor phase masses in each tank and in the tank farm; Rate of change of product level; Forecast of the time of filling (emptying) the tank; Alarm: Minimum and maximum emergency level; The maximum level of bottom water; The level of separation (stratification) of environments; The upper level of the measured medium; Unauthorized changes to monitored levels; Changes in the temperature of controlled environments (layer by layer or on average in height). System applications: Process equipment management; Alarm; Extraction of petroleum products; Storage of petroleum products and liquefied gases; Transportation of petroleum products and liquefied gases; Refining of petroleum products; Storage at oil depots and oil terminals. Management of technological equipment for unloading and loading feed; Alarm; Storage.

JSC "Elevatormelmash" manufactures a pneumatic sampler U1-UPP, which is designed for mechanized sampling of grain and oil seeds from car bodies along the entire height of the embankment, including the bottom layer.

A vertical fire-tube water boiler is designed to heat water with a temperature of up to 115 ° C, due to a built-in superheater with an overpressure of 0.07 MPa (0.7 kg / cm2) in order to supply heat to technological processes in the following industries: - agricultural (forage production) - construction and assembly (asphalt concrete) - communal (heating, hot water using a boiler) - food (bakery, dairy, sausage, confectionery) - woodworking. The boilers are easy to maintain and do not require significant operating costs.

This set of equipment requires a room with dimensions of 11000x6000 mm. The kit includes: - polymerization chamber with internal dimensions (LxWxH) 3000x1600x1800 mm - 1 pc .; - 2-post spraying chamber through-type with internal dimensions (LxWxH 3000x900x1800 mm - 1 pc .; - ring top transport system - 1 set; - spray gun - 2 pcs; - compressed air preparation device - 2 pcs. The upper transport system includes: Transport overpass - 2 units; Transport trolley - 2 pcs.; Transport carriage - 10 pcs.; Guide streams - 5 pcs.;

This set of equipment requires a room with dimensions 7500x8000 mm. The set includes: - polymerization chamber with internal dimensions (LxWxH) 3000x1600x1800 mm - 1 pc .; - 2-post spraying chamber through passage type with internal dimensions (LxWxH) 3000x900x1800 mm - 1 pc .; - semi-circular upper transport system - 1 set; - spray gun - 2 pcs; - compressed air preparation device - 2 pcs Upper transport system , includes: Transport overpass - 1 unit; Transport trolley - 2 pcs .; Transport carriage - 10 pcs .; Guiding streams - 5 pcs .;

This set of equipment requires a room with dimensions 11000x6000 mm. The set includes: - polymerization chamber with internal dimensions (LxWxH) 3000x1600x1800 mm - 1 pc .; - universal spraying chamber with internal dimensions (LxWxH) 3000x800x1800 mm - 1 pc .; - lower transport system (loading trolley) - 1 set; - spray gun - 1 piece; - compressed air preparation device - 1 piece Lower transport system, includes: Racks - 2 pieces; Monorail - 1 piece; Swivel carriage - 1 pc .; Loading cart - 1 pc .; Transport route - 8 linear metro

Разъединители РЛНД-1-10- предназначены для включения и отключения под напряжением участков электрической цепи высокого напряжения при отсутствии нагрузочного тока, а также заземления отключенных участков линий при помощи стационарных заземляющих ножей.

Станция прогрева бетона КТПТО-80.02 У1В КТПТО применяется трехфазный трехобмоточный трансформатор типа ТМГОБ мощностью 80 кВА с естественным масляным охлаждением. Термообработка бетона ускоряет процесс его твердения, а наличие автоматического регулирования температуры сокращает расход электроэнергии. В КТПТО имеются блокировки, обеспечивающие безопасность работ обслуживающего персонала при прогреве бетона.

Станция прогрева бетона ТСДЗ-80/0,38 предназначен для электропрогрева бетона и мерзлого грунта. Эффективность метода прогрева бетона высока и позволяет быстрее достигнуть необходимых прочностных характеристик. Так, скорость высыхания бетона при обычном способе строительства составляет примерно один месяц. В случае же электрического прогрева бетона он высыхает намного раньше — от одной до трех недель — все зависит в этом случае от температуры окружающей среды, от марки бетона и его плотности.

Power cable VVGng (A) -LS 4x2.5 Power cable with copper conductors, PVC insulation, PVC sheath VVG-P

Power cable КГхл 3х2.5 + 1х1.5-660

Power cable VVGng (A) 3x1.5 (stand-by) -0.660 single-wire Power cable with copper conductors, PVC insulation, PVC sheath VVG-P

Power cable VVGng (A) 3 * 2.5 GOST Power cable with copper conductors, PVC insulation in PVC sheath VVG-P

Кабель силовой ВВГнг(А)-LS 2х2.5 плоский Силовой кабель с медными жилами, с ПВХ изоляцией в ПВХ оболочке ВВГ-П

Power cable VVGng (A) - FRLS 3x2.5 (N.PE) single-wire Power cable with copper conductors, PVC insulation, PVC sheath VVG-P

Power cable VVGng (A) -FRLS 2x1.5 (N) -1 single-wire Power cable with copper conductors, PVC insulation, PVC sheath VVG-P

Power cable VVGng (A) -LS 3x4 flat Power cable with copper conductors, PVC insulation, PVC sheath VVG-P

Выключатель автоматический трехполюсный 40А С ВМ63 6кАВыключатель автоматический в модульном исполнении

Выключатель автоматический двухполюсный 40А C ВМ63 6кАВыключатель автоматический в модульном исполнении

Распределительный трансформатор ТМ (ТМГ)-СЭЩ 15, 20, 35 кВ – понижающий трансформатор с мощностью в трёх фазах до 2500 кВА включительно, класса напряжения изо- ляции 15 , 20 и 35 кВ, с раздельными обмотками высокого и низкого напряжения, с напряжением распределительной сети до 1 кВ, питающей непосредственных потребителей электроэнергии.

Автоматические выключатели ВА88 предназначены для проведения тока в нормальном режиме и отключения тока при коротких замыканиях, перегрузке, недопустимых снижениях напряжения, а также для оперативных включений и отключений участков электрических цепей и рассчитаны для эксплуатации в электроустановках с номинальным рабочим напряжением до 400 В и на номинальные токи от 12,5 до 1600 А.

Автоматические выключатели ВА88 предназначены для проведения тока в нормальном режиме и отключения тока при коротких замыканиях, перегрузке, недопустимых снижениях напряжения, а также для оперативных включений и отключений участков электрических цепей и рассчитаны для эксплуатации в электроустановках с номинальным рабочим напряжением до 400 В и на номинальные токи от 12,5 до 1600 А.

Автоматические выключатели ВА88 предназначены для проведения тока в нормальном режиме и отключения тока при коротких замыканиях, перегрузке, недопустимых снижениях напряжения, а также для оперативных включений и отключений участков электрических цепей и рассчитаны для эксплуатации в электроустановках с номинальным рабочим напряжением до 400 В и на номинальные токи от 12,5 до 1600 А.

Автоматические выключатели ВА47-29 рекомендуются к применению в вводно-распределительных устройствах для жилых и общественных зданий.ВА47-29 предназначены для защиты распределительных и групповых цепей, имеющих различную нагрузку

Автоматические выключатели ВА47-100 предназначены для защиты распределительных и групповых цепей, имеющих активную и индуктивную нагрузки. Рекомендуются к применению во вводно-распределительных устройствах бытовых и промышленных электроустановок. 80 типоисполнений на 10 номинальных токов.

Быстродействующий защитный выключатель, реагирующий на дифференциальный ток, без встроенной защиты от сверхтоков. Предназначен для защиты человека от поражения электрическим током при случайном непреднамеренном прикосновении к токоведущим частям электроустановок и предотвращает возникновение пожаров вследствие протекания токов утечки на землю. Не имеет собственного потребления электроэнергии и обладает высокой механической износостойкостью.

Выключатель, реагирующий на дифференциальный ток, со встроенной защитой от сверхтоков.

Выключатель, реагирующий на дифференциальный ток, со встроенной защитой от сверхтоков.

Измерительный трансформатор — электрический трансформатор для контроля напряжения, тока или фазы сигнала первичной цепи. Измерительный трансформатор рассчитывается таким образом, чтобы оказывать минимальное влияние на измеряемую (первичную) цепь; минимизировать искажения пропорции и фазы измеряемого сигнала в измерительной (вторичной) цепи.

Измерительный трансформатор — электрический трансформатор для контроля напряжения, тока или фазы сигнала первичной цепи. Измерительный трансформатор рассчитывается таким образом, чтобы оказывать минимальное влияние на измеряемую (первичную) цепь; минимизировать искажения пропорции и фазы измеряемого сигнала в измерительной (вторичной) цепи.