Oil & gas equipment and machinery in bulk on Qoovee

Compressor plants 1KR-2 and 1AKR-2 are used to pump air into cylinders and maintain pressure from 80 to 150 kgf / cm2 in manual (1KR-2) and automatic (1AKR-2) modes. Compressor plants 1KR-2 and 1AKR-2 are used: · for starting diesel-electric units; · To provide industrial facilities with compressed air; · As part of oil drilling rigs. The installation consists of a three-stage compressor, driven by an electric motor through a V-belt drive. Circulating pressure lubrication from gear pump. Liquid cooling, closed loop.

Air compressors 4VU1-5 / 9 series are used to provide compressed air to pneumatic tools, devices, mechanisms; work in pneumatic transportation systems for bulk solids (sand, cement, grain, etc.). Are applied: · at machine-building enterprises; · As part of oil and gas rigs; · At the facilities of the petrochemical, gas, metallurgical, electrochemical, mining and other industries. Piston compressors, V-formed, four-cylinder, two-stage. Drive from an electric motor through an elastic coupling. Forced lubrication. Air cooling of cylinders and refrigerator. Condensate discharge and discharge are automatic. Compressors 4VU1-5 / 9 are equipped with an automatic control and protection system, which provides: · automatic maintenance of pressure in the receiver within specified limits by starting and stopping the compressor, as well as bypassing the air from the discharge to the suction; · Unloading and purging of the compressor when it is stopped; · Electric oil heating in the crankcase (for the northern version); · The ability to purge and unload the compressor from the control panel in manual mode; · Emergency stop during overheating of compressed air; · Emergency stop when the pressure in the lubrication system is below the permissible value. Compressors with relay or microprocessor automation are available. 4VU1-5 / 9 air compressor series are manufactured in the following modifications: 4VU1-5 / 9 M1 compressor 4VU1-5 / 9 M2 compressor 4VU1-5 / 9 M3 compressor (without electric motor and frame) 4VU1-5 / 9 M4 compressor 4VU1- compressor 5/9 M6 (without electric motor, refrigerator, frame, control panel and pressure gauge shield) 4VU1-5 / 9 M7 compressor with electric oil heating (without electric motor and frame) 4VU1-5 / 9 M8 compressor with electric oil heating 4VU1-5 / 9 compressor M32 (without electric motor and frame) Compressor 4VU1-5 / 9 M42

A heat pump is a machine that can transfer heat from a colder environment (air, earth, solar radiation, water from underground strata, water from open reservoirs, water from a common network, heat recovery, industrial waste water) to a hotter one (air, water and other). Under certain conditions, a heat pump with a compressor having a 1 kW electric motor as a drive can provide a thermal power of 3-5 kW, although it is known that the simple heat generation on a resistance with an electric power of 1 kW cannot exceed 1 kW. INSTALLATION APPLICABLE COMPRESSOR REFRIGERANT OVERALL DIMENSIONS, MM WEIGHT (NET), KG NKV60-2-8 “air-water” 5PB20-2-024 - 2 pcs. R22 1280x1830x1860 1300

Designed for pumping air and gases, non-aggressive to gray cast iron, structural steel and mineral oil, and explosion-proof in the conditions of the flow part and gear reducer. It is used ONLY with a fore-vacuum pump and is the second stage of vacuum. It is used in the following processes: drying of transformers and other devices; impregnation of windings, cable, wood and other materials; distillation in metallurgy upon receipt of non-ferrous metals, as well as chemically pure substances in the chemical and pharmaceutical industries; freeze-drying of products, biologically active preparations, vaccines; melting, casting, alloying of metal alloys; sintering of fine-grained and powdery materials in powder metallurgy, during sintering, coking, in the manufacture of refractory products. The DVN pump consists of the pump itself, mounted on the foundation frame, and connected to it by means of an elastic finger coupling of the electric motor. Cooling of the pumps 2ДВН-500 - air, 2ДВН-1500 - water. NAME OF PARAMETERS \ MODEL PUMP VACUUM 2DVN-1500 Speed of action, not less than, l / s 1500 Differential pressure, not more than, kPa 1,0 Maximum residual total pressure, Pa 0,5 Electric motor power, kW 11 Cooling water consumption, l / h 360 Weight, kg 830 Overall dimensions (length x width x height), mm 1840 x 580 x 850 Designation of the recommended fore-vacuum pump NVZ-180

COMPRESSOR HIGH PRESSURE UNITS of the EKPA-2/150 series are intended for forcing air into cylinders and automatically maintaining pressure in them within 150 kgf / cm2 or 200 kgf / cm2. Used: · to start diesel-electric units; · For filling cylinders of breathing apparatus. The installation consists of a compressor and an electric motor. The compressor is three-stage. Circulating pressure lubrication from gear pump. Cooling - with seawater from a vortex type pump. Installation management is automatic. Installations are made in tropical marine execution. At the request of the customer can be made in marine export or marine tropical designs. The automatic control and protection system provides: - automatic start-up of the installation at a system pressure of less than 80 kgf / cm2; - automatic stop at a pressure in the system of 150 or 200 kgf / cm2; - emergency stop when the oil pressure in the lubrication system is reduced to 0.5 kgf / cm2; - emergency stop when the air temperature rises after the refrigerator of the first stage to 60 ° C; - Alarms on the automatic control panel for each emergency stop.

NAME OF PARAMETERS \ MODEL AIR COMPRESSOR 4VU1-5 / 9M32 Final overpressure, kgf / cm2 8 Productivity, m3 / min according to the suction conditions: 5 compressed air: 0.56 Engine power, kW - Crankshaft rotational speed, rpm 735 Weight , kg 750 Overall dimensions, mm 1110 x 960 x 1110 Oil heating in the crankcase -

Designed for pumping air through gas purification units of nuclear power plants, transporting explosion-proof, toxic gases that do not contain droplet liquid and mechanical impurities. The gas blower is a rotational compressor machine made of stainless steel, driven by an electric motor through an elastic coupling. The gas blower can be operated at a suction gas temperature of -10 ° C to + 40 ° C. NAME OF PARAMETERS \ MODEL GAS BLOWING ROTARY E21-50-4A Max. pressure difference, kPa, mode 50 Productivity, m3 / min 1.44 Power of electric motor, kW 4.0 Weight, kg 240 Overall dimensions (length x width x height), mm 1085 x 520 x 510

Designed for the transport of air, toxic and aggressive to oil gases, non-corrosive to cast iron and structural steel, explosion-proof in the flow part and not containing droplet liquid and mechanical impurities. The gas blower is supplied driven by an electric motor through an elastic coupling. Delivery options with an explosion-proof or general industrial electric motor are possible. The gas blower can be operated in pressure or vacuum modes at an ambient temperature of -10 ° C to + 35 ° C. NAME OF PARAMETERS \ MODEL GAS BLOWING ROTARY 1G21-30-2V Max. pressure difference, kPa, pressure mode: 30 vacuum: 30 Productivity, m3 / min 4.32 Power of electric motor, kW 4.0 Weight, kg 285 Overall dimensions (length x width x height), mm 1050 x 450 x 545

Rotary compressor 12VF-M-30-0.6-1.5-2.2 VF compressors: 2VF, 12VF, 32VF and 34VF are designed for transporting air and gases non-corrosive to cast iron, structural steel and mineral oil. VF rotary compressors, compressors 2VF-M-70-21,5-1,5-45, 12VF-M-20-0,69-1,5-2,2, 32VF-M-60-22,1-1 5-45, 32VF-M-80-21.0-1.5-45 (32VF-21 / 1.8SM2U3), 34VF-M-30-38.2-1.5-45, 34VF-M- 40-37.4-1.5-45, 34VF-M-50-36.6-1.5-45 (34VF-37 / 1.5SM4U3) are used: in pneumatic transportation systems for bulk materials, air mail containers; in aeration systems of the sludge pools of treatment facilities, drinking water storage tanks, fish ponds; when spraying crops and gardens; during fire fighting; when removing dust in printing houses, foundries, filter plants; for driving various devices and mechanisms (grips, clamps). Compressor stations 2VF, 12VF, 32VF and 34VF are supplied with vertical and horizontal air flow direction. Compressors 2VF, 12VF, 32VF and 34VF consist of a compressor unit, a check valve, an electric motor, silencers and a noise-attenuating casing. Compressors operate in pressure and vacuum modes. Compressors rotary VF series are issued instead of earlier made compressors of grades 1A, 2AF.

The flange alignment tool is aimed at axial alignment of flange oil and gas pipelines, central heating stations, etc. during their assembly. VFG-9 is distinguished by excellent operational characteristics: high performance and speed of operation, long-lasting operation without additional service. Maximum force of 88.20 kN and operating pressure of 700 bar ensure top quality and speed of operation at small oversize of the tool. Force – 90 kN Maximum operate pressure – 700 bar Gydrocylinder rod stroke – 70 mm Operating distance - up to 245 mm Flange diameter - up to 1000 mm Fastener hole diameterof flanges aligned - not less 38 mm. Oversize: (LxWxH), mm - 510х140х255

The flange alignment tool is aimed at high quality elimination of axial and rotational distortions of flange joints on pipelines of different application. Having compact size, small weight and maximum force of 1 tf only, this item of a flange alignment tool has the following exceptional characteristics: high performance, high speed of operation, reliability and durability. Force – 1 kN Compact body – 3.5 kg Oversizes (LxWxH), mm: - 234х25х151

Force: 150 kN Min. gap: 6 mm Max. opening: 94 mm.⃰ Weight: 6 kg Operating pressure: 81 sm3

A professional mechanical unit for spreading flanges RFM-9 for preventive and remedial maintenance on pipelines of a various diameter (a flange method of joint). The gap setting required for installation of the spreader is 6 mm only, and the maximum spreading width is 92 mm. The mechanism is equipped with step blocks that enable to reduce flange spreading time significantly. The unit can develop force of 98 kN, and the mechanical structure ensures soft performance. Characterized by small weight and compact size, at that being reliable enough. Force: 98 kN Min. gap: 6 mm. Max. opening: 94 mm.⃰ Weight: 6 kg Set weight: 8,5 kg

Газовые баллоны метан от 30л до 120 литров. Все необходимые сертификаты имеются.

Diaphragm dosing pumps NDR-2M were developed to replace the classic plunger pumps used in technological processes where leaks of the pumped medium are unacceptable. A distinctive feature and main advantage of diaphragm pumps is the complete tightness of the pumped liquid in relation to the environment. The seal in such a pump does not require maintenance during operation. Dosing diaphragm pumps of the NDR-2M series, manufactured at the Kharkov Pumping Plant, are designed for pumping liquids and suspensions, including toxic and aggressive ones. The presence of abrasive in the pumped liquid is not a problem for the diaphragm pump. The pumps are modular in design. Main units: drive, coupling, electric motor, hydraulic part. Supply - 6.9x10-6 (25) m3 / s (l / h); Pressure at the pump outlet, no more than - 40 (400) MPa (kgf / cm2) Electric motor power - 1.5 kW You can order equipment or its modernization, discuss the required configuration, get answers to your questions on request.

We offer a gas reducer! Profitable! Used for a gas generator, walk-behind tractor or motor pump. It is stationary, the operator decides what type of fuel to use: gasoline, main gas (methane), propane or eco-gas. To switch the gas generator, walk-behind tractor or motor pump to the selected type of fuel, just turn the lever. The biggest advantage of the gearbox is the economy. Gas is much cheaper than gasoline, which allows reducing fuel costs by up to 50% - if it is propane and up to 90% - if it is methane, when using biogas - up to 100%. Another important advantage of a gearbox for a gas generator, walk-behind tractor or motor pump is environmental friendliness. Price: 1970 rubles - reducer 290 rubles - repair kit The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!

Buy a gas tank from an industrial producer of the KRAPT company

Modular gas station 15 cubic meters to buy from the manufacturer with delivery to the customer. Mini refueling station is intended for commercial use - storage and dispensing of diesel fuel, equipped with a fuel dispenser 80 liters per minute, 380 V. The refueling module is equipped with a tank with a canopy and a stand under the fuel dispenser. The tank for diesel fuel is cylindrical, horizontal on cradles, with conical bottoms, equipped with a hatch with a set of technological equipment installed on it. The volume of the fuel tank is 15 cubic meters. You can buy mini refueling stations with the volume of the tank for gasoline, kerosene, diesel fuel, gas at the request of the customer from us. Visit our page