Agriculture Machinery & Equipment in bulk on Qoovee

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure See Technical Features Pilot Configuration Sealed Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 25 psi Operating Characteristic Semi-restrictive Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Model Weight 0.27 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 15 gpm Pilot Ratio 5:1 Maximum Recommended Load Pressure at Maximum Setting 4615 psi Maximum Setting 6000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 40 psi Adjustment - No. of CCW Turns from Min. to Max. Setting 5 Operating Characteristic Standard Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.44 lb.

Technical Data  Series 0 Cartridge Thread M16 Valve Hex Size 3/4 in. Valve Installation Torque 20 - 25 lbf ft Cavity T-162A What models can this kit be used with? CDAP Mechanically operated, back-to-back check valve CDAQ Mechanically operated, back-to-back check valve CNAC Fixed-orifice, non-pressure compensated, flow control valve with reverse flow check CNBC Free flow nose to side check valve with bypass orifice CSAN Insert style, single ball shuttle valve with signal at port 2 CSAW Single ball shuttle valve with signal external CSAY Single ball shuttle valve with signal at port 2 CXAD Free flow side to nose check valve CXBA Free flow nose to side check valve CXBG Flush mount, free flow nose to side check valve CXBM Insert style, free flow nose to side check valve DFBD FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBE FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBF FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DFBG FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DTBF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve FCBB Fixed-orifice pressure compensated flow control valve with reverse flow check FPBD FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBE FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBF FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 FPBG FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 FPBI FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 FPBJ FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 FPBM FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBN FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBU FLeX Series electro-proportional, blocking poppet throttle - normally closed FQBA Fixed-orifice, flow fuse valve FXBA Fixed-orifice, pressure compensated flow control valve NCBB Fully adjustable needle valve with reverse flow check NFBC Fully adjustable needle valve RDBA Direct-acting relief valve RPCC Pilot-operated, balanced piston relief valve RQCB Kick-down, pilot-operated, balanced piston relief valve XZCA All ports blocked cavity plug XZCC Flush mount, all ports blocked cavity plug XZOA All ports open cavity plug XZOC Flush mount, all ports open cavity plug  

Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC) Arc Suppression (TVS) Included Power Consumption (cold) - at rated voltage 22 watts Maximum Ambient Temperature 122 °F Voltage/Frequency 24 VDC Operating Voltage Range +/- 10% nominal Duty Cycle Rating 100 % Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin Connector Environment Rating IP65/IP67 Solenoid Tube Diameter .75 in. Coil Nut Torque 4.5 lbf in. Model Weight 8.2 oz.

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Explosion proof design for flammable refrigerants9. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14 Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings  

SOVOFLO Food Grade Pump Water Pump Diaphragm Pump KDP-14B series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose: Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14B, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14B Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings

Product Description Custom Industrial Electronic Electromagnetic Belt Screw Vibrating/Weigh Loss in Weight Feeder Scale Conveyor Dry Iron Remover dosing system Bucket type Batching Scales for Coal/Cement/Limestone/Mine IndustryTechnical parameters:weighing accuracy≤±0.5-1%weighting accuracy:≤1%; manner of working: batch service environment:Instrument:-50~50ºCweighter body:-30~+50ºC;relative humidity≤85% Power:~220V -15%-10%,50Hz  Electromagnetic Belt Vibrating/Weigh Feeder for Coal/Cement/Limestone/Mine IndustryHopper Screw Conveyor, Spiral Weighting Feeder for Sale with ISO ApprovalIndustrial Feeder Mining Screw Feeder Spiral Screw Conveyor Shaftless Conveyor Screw U Type Screw Auger Conveyor for SludgeCustom Electronic Belt Scale Automatic Electronic Belt Scale Feeder High Precision Electronic Belt Measuring Scale Conveyor Sacle Conveyor WeigherTwin Screw Loss in Weight FeederConveyor Belt Electromagnetic Separator Dry Iron Remover

G26030-2 Lithium-Ion Lawn Mower /Single Package (Economy Section) Rated voltage: 20V No-load speed: Low speed 3500/high-speed 5500±10%rpm No-load current: 5/7.5 A Rated power: 600W Maximum grass diameter: Φ3x260mm1. Adopt a front brushless high-power motor. 2. Can be used with a grass head, can also be used with a circular saw blade / and tooth blade / three-tooth blade, grass head, cutting shrubs are available. 3. the weight is lighter than petrol, lithium battery power, and more environmentally friendly.

60/20 Model Sliding cultivator 9 - 11 - 13 feet

Material: Carbon Steel Warranty: 1year. Brand Name: Tinmy Car. Model: Truck, Trailer. Size: standard size. Product Name: Truck Container Lock. Application: truck and trailer part. Quality: 100% Tested. MOQ: 1 PCS. Delivery Time: 20-30 DAYS. Certification: ISO/TS16949:2016 keyword: container twist lock.

Material: Steel Warranty: 1year. Brand Name: Tinmy Car. Model: Truck, Trailer Size: standard size. Product Name: Truck Trailer Suspension Application: truck and trailer part. Quality: 100%. Tested MOQ: 1 PCS. Delivery Time: 20-30 DAYS. Certification: ISO/TS16949:2016 keyword: Trailer Suspension Kits.

Main Advantages > Long-lasting quality, hot-dip galvanized material with 15-20 years service life. > Intensive management and automated control. > No waste of feed, save feed cost. > The sufficient drinking guarantee. > High-density raising,saves land and investment. > Automatic control of ventilation and temperature. RETECH focuses on product upgrades and technology research and development. We integrate the IOT technology and cloud computing to assist in the digital and intelligent upgrade of farms. RETECH can make chicken farming much smarter and easier.

Press granulators are designed for pelletizing sheep wool. Raw materials for granulation: sheep wool, sawdust/shavings, straw/hay, reeds, paper/cardboard, sunflower/mustard/buckwheat husks, peat, meat and bone meal, compound feed/feed/premixes, tea production waste, grain waste, bran and other biomass . The resulting product: granule (pellet): diameter 6;8 mm, length 10-20 mm. Scope of application of the finished product: - sowing with grain crops Model: BN 100W(5.5 kW)/BN 100W(7.5 kW) BN 400 W/BN600. Productivity: 50 -60 / 60-70 / 90-180 / 100-210 kg/hour. Power consumption: 5.5 /7.5 /11/ 22 kW/hour. Occupied area: 2 / 2 / 2 / 2 m2. Weight: 130 / 145 / 210 / 260 kg. Price FCA warehouse Znojmo (Czech Republic): 8500 / 9150 / 17900 / 22950 EURO. Country of origin: Czech Republic. Sheep wool pellets have many advantages: 1. The composition of wool is more uniform than manure. 2. Wool decomposes more slowly than manure, so it takes longer to nourish plants. 3. Wool retains moisture well and the soil stays moist longer. 4. The granules in the soil swell and thereby loosen the soil. These granules are great for fertilizing vegetables, fruit trees and flowers.

Description:    DC  motor Phase:         12solt  8 pole Voltage:       DC12v  24v  48v Frequency:      50/60HZ Out Power:      50w Type of bearing:      Ball bearing Protection:      Thermal cutoffs or Automatic reset thermal protector Rotation:       CW. or CCW. Speed:         200rpm   We are a gear motor manufacturer, our products including electric geared motor, coin return machine gear motor, lifter gear motor, oil pump gear motor, game machine gear motor, lift chair gear motor, massage chair gear motor, lubricator gear motor, hot dog machine gear motor, etc.   All of them meet worldwide standards and win great reputation in the fields. The goal is to achieve the corporation at ODM and OEM basis & to provide the components required for the manufacturing.

Automatic control systems of our production are modern, comprehensive solutions in the field of automation and protection of climate systems at civil and industrial construction facilities. They are manufactured both in standard design and on an individual order, taking into account all regulatory requirements in the field of safety and technical regulations of the Customs Union TR CU 004/2011 and 020/2011.   For the convenience of the consumer, standard circuit solutions are offered that implement a set of measures to ensure the smooth operation of the ventilation system and climate control equipment.   It is possible to manufacture installations with an integrated automation system on the principle of "on and running", which reduces the amount of design and installation work, as well as eliminate errors during installation and commissioning. The built-in automation provides for the installation of frequency converters and sensors with their disconnection in the control cabinet on the installation body.    The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

The SmartSort C 4 photo sorter is suitable for sorting food and non-food bulk products and successfully solves problems with small-seeded products. Productivity up to 28 t/h. The number of cameras per tray is from 2 to 4, with a resolution of 5400 pixels operating in the visible and infrared range. Advanced AI (Smart mode) in SmartSort photo sorters independently creates a sorting profile based on samples of good and bad products, taking into account differences in color and size, as well as in texture and shape. The selection of optimal parameters is carried out automatically and does not depend on the level of training of the technician. This ensures the best sorting results incorporated into the equipment by the developers. The accuracy of sorting and ease of operation are significantly influenced by the ability to automatically adjust all sections of the machine using one master chamber, implemented only in our software. Confidence in the stable operation of the equipment, in cases where the quality of the raw materials may be unstable, is ensured by intelligent adjustment of sorting parameters directly while the equipment is operating. Modern service increasing reliability. Using CSort Cloud and a digital twin of the photo sorter, the CSort service team monitors the operation of the photo sorter 24/7. We learn about dangerous and borderline sorting states long before the user notices it. At any time, including remotely, the service is ready to resolve emerging issues. All this allows you to avoid losses in sorting quality, reduce wear and prevent equipment breakdowns. This approach allows you to achieve uninterrupted operation and minimize costs due to equipment downtime.

Flexible electric and tractor-powered suction conveying systems for both indoor and outdoor conveying. All SUC systems are designed to pick up the grain on the suction side and deliver the material on the pressure side, so no additional loading equipment is needed. Our wide range of suction blowers fits the needs of all farming applications. From low capacity on-farm installations to high-capacity mobile systems. All systems ensure cleanliness from batch to batch and economic acquisition. Electric powered capacity is up to 33 t/hour and PTO driven capacity is up to 120 t/hour. For all setups, Kongskilde offers a wide range of additional systems for efficient suction. Different types of heads and pipes secure efficient handling, gentle for material, and are convenient for the operator. A unique, flexible solution for conveying indoors or outdoors Whether you need a temporary or permanent conveying system, Kongskilde has vacuum and suction systems that will help you move grain where it needs to be. The wide range of electrical and tractor-powered grain vacs with capacities of up to 5,000 bushels of grain (120 tons) per hour means there’s a blower for every job. Additionally, the OK Pipe System makes it quick and easy to establish temporary or permanent pipelines. How it works Grain is sucked into the system on the intake side of the blower. The blower’s intake is connected to the top of a suction cyclone. In this cyclone, grain and air get separated. The grain drops down into the rotary valve fitted on the bottom outlet of the cyclone. The rotary valve deposits the grain into the pipeline on the pressure side of the blower. At the point of delivery, an outlet cyclone slows down the speed of the grain before it is dropped out of the bottom outlet. Suction Blowing System Example SUC-E, SUC-T, SUC-TR, and SupraVac 2000 Suction Blowers The SUC E is the electrically driven Grain Vac/Suction Blower. SUC-T, SUC-TR, and SupraVac 2000 are all tractor-driven. SUC-T is lift mounted, and SUC-TR and SupraVac 2000 are trailer types. All three models offer the possibility of maximum mobility together with high capacity. Furthermore, SupraVac 2000 offers a hydraulically operated truck load-out boom that can fold and unfold for road transport. SUC-TR Tractor Powered The SUC-TR models are pull-type PTO-driven grain vacs that can be used to load trucks or grain wagons directly from the on-floor storage, silos or grain bins. They can also be used to convey commodities to storage where high-capacity conveying is required. The trailer models are powered by the tractor’s PTO shaft. Loading equipment is standard on SUC-TR models. Ideal for loading trucks and trailers. Belts can be tightened without using tools. SupraVac 2000 Tractor Powered The SupraVac 2000 has a capacity of up to 5,000 bu/h (150 t/h), making it the ideal grain vac for farmers and commercial users. The power takeoff-driven SupraVac 2000 requires 150 hp. It has a hydraulic-folding truck loading boom that allows for quick setup. It conveniently locks into place for transport and storage. Our largest tractor-powered suction blower. Capacity up to 120 t/h. Loads even the largest vehicles quickly. Hydraulic folding of loading equipment to transport position. Easy connection of pipe system. Optional transport box for the suction head and pipe components. SUC-T Tractor Powered The SUC-T models are three-point hitch PTO-driven grain vacs. The blowers can be used to convey commodities to where high-capacity conveying is required and when no electrical power source is available. Attached to the tractor’s three-point linkage. Capacities up to 44 t/h. Automatic air control is standard on the SUC-T. Also available with suction equipment for pure compressed air conveying. Provides approx. 20% increased capacity. The compact design makes it easy to maneuver. SUC-E Electric Powered SUC E is the electrically driven Suction Blower, ideal for indoor use where tractor-powered units are not an option. SUC E is mounted on a trolley and can therefore easily be moved from place to place. Mainly used for grain conveying inside buildings. Capacities up to 33 t/h. On wheels and easy to move. Control cabinet for automatic starting/stopping the motor. Belt transmission protects the drive of both blower and rotary valve. Benefits Tractor-powered models are independent of electric power supply. Can be used in fields for loading grain. Moves the grain horizontally, vertically, and around corners. No requirements for the configuration of buildings or grain pits. If higher capacity is needed, the suction blower can be replaced by a larger model using the same pipe system. Indoor storage of the machines means that it is less exposed to the weather.

How the Pressure System Works When the conveyor pipe is connected to the pressure side of the blower, a powerful flow of air is directed through it. An injector or rotary valve directs the material to be conveyed into the piping system. Diverters are used to easily transport grain to different delivery locations. Advantages Minimum installation space, transport pipes can go anywhere. The low weight of the transport pipe means only small loads on buildings. No heavy components should be installed in hard-to-reach areas. A wide selection of modular pipe components means flexible installation options. Only wiring to the blower and inlet rotary valve, which are located centrally. Easy capacity control with rotary valve inlet flap. Maximum performance is achieved through pressure feeding. TRL Small Blowers - Direct Drive Direct drive means that the blower rotor is attached directly to the motor shaft. The TRL blower creates air flow in the pipes transporting the grain. The amount of grain that can be blown through the pipes depends on the power of the blower. Blower housings made using a mold. Dynamically balanced rotors ensure smooth running. Air control ensures efficient transport, minimizes pipe wear and reduces damage. Minimal maintenance. TRL Large Belt Drive Blowers Belt drive means that large blowers use a belt drive between the motor shaft and the blower shaft. To achieve higher pressure with higher output, large blowers have multiple rotors. An efficient modular system for creating blowers of varying power. Proven and thoroughly tested design. Air management ensures a constant flow of air to transport grain and ensures gentle grain transport. Can be used for both pressure and aspiration systems. Electronic Air Regulator (EAR) Whether crops need to be transported horizontally, vertically or around corners, quality is protected by the Electronic Air Regulator. Kongskilde's solution is to use high volume air at low pressure to transport product safely. The grain actually moves on a cushion of air. This system provides an ideal way to fill bins, silos or flat storage.

Kongskilde’s twin-compartment batch weighers operate on a continuous batch weighing principle, in which the material flows constantly through the weigher at a given capacity. Weighing is based on establishing a balance between the batch of the material and the weigher’s fixed weight. This ensures optimum accuracy, irrespective of the material being weighed. The robust but simple construction of the weighers ensures their reliability and makes the various models well-suited to many agricultural and industrial applications.

For grain storage, vegetable storage, livestock farming, for the safety of home and garden from bacteria, viruses and unpleasant odors, detailing center, cleaning. 100% disinfection of food production without chemicals thanks to ozone technology. What problem needs to be solved using an ozonizer? Elimination of odors. Repels rodents and insects. Destruction of bacteria, viruses, fungi. Extending the shelf life of the crop. DOES NOT affect the chemical composition and taste of the product (0% chemicals). Industrial ozonizers producing gas - ozone. Ozone is 300 times more powerful than chlorine in its disinfectant properties. Ozone productivity: from 5 g/hour. Air flow: from 105 m3/h to 4160 m3/h. Supply voltage: 220/380 V Power consumption: from 89 W Equipment is selected based on the volume of the area. We will select what type of equipment you need.

The Eco Cooling system is designed for dry and hot climates. It is based on the effect of evaporation. The system is based on Eco Cooling evaporative cooling cassettes. The cassette consists of corrugated pulp and paper sheets with different corrugation angles. The sheets are impregnated with a special compound and joined together. The design of the cassette guarantees high evaporation efficiency and low pressure loss during operation. Thanks to a special impregnation technology for highly absorbent cellulose paper, a strong self-supporting structure is created, protected from decay and destruction, with increased durability. Advantages of cooling corrugated panels: Eco Cooling provide rooms with fresh, cooled, humidified and purified air, while excess heat, smoke, and unpleasant odors are removed through open windows, doors or exhaust fans. - Air cooled and purified in a natural way - Cooling efficiency increases as the outdoor temperature rises - Reduction in energy costs by 5-10 times compared to conventional air conditioning systems - Temperature and humidity control - Easy installation and low operating costs Eco Cooling system in addition to cooling, it also humidifies the air, which is especially necessary in any industry, since such air improves the quality of products. Our production in Uzbekistan (best quality on the market): Evaporative cooling panel block height - 2 m; 1.8 m; 1.7 m. 1.5 m. Width of the panel block - 60 cm. Thickness under the order - 100; 150 mm

HYDRAULIC PUMPS

The compact and versatile Mini Scamp Tractor. Equipped with an electric start 125cc engine, the Mini Tractor delivers fun and power. Its easy-to-use controls, mini one man golf cart jeep like with comfortable seating, forward and reverse gears, and headlight make playtime, any time. With its compact size and increased maneuverability, the Mini Tractor is easy to transport and store, and can navigate through tight spaces with ease. Attach a yard cart or tow trailer for added versatility. From the backyard to the stockyard, the Mini Tractor is made for this. These awesome vehicles are going fast, get yours now while supplies last! Features & Specifications: 125cc Electric Start Engine Forward & Reverse Gears Fully Automatic W/ Reverse Parking Brake Adjustable Seat Front Bumper Bar Headlight and Taillight Hydraulic Disc Brake VEHICLE SIZE (L X W X H): 67.5 IN X 37.5 IN X 53 IN GROUND CLEARANCE: 3.5 IN WHEELBASE: 41.5 IN

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

Organic waste to fertilizer production line uses the organic waste as the raw material, such as organic waste, straw, excrement from people, livestock and poultry, cake meal, agricultural and sideline products, then it is fermented, deodorized and thoroughly decomposed to be made fertilizer. Raw Materials Agricultural waste : Straw,dregs of beans,cotton dregs,rice bran,etc Livestock/human waste: Mixture of poultry litter(PL) and livestock/animal/human waste,slaughterhouse waste,fish maket,urine and dung of cattle,pigs,sheep,chicken,ducks,geese,goat,etc Industrial waste: Wine lees,vinegar residue,manioc waste,sugar scum,furfural residue,etc Home scrap: Food waste,bones,the roots and leaves of vegetables,etc Mineral: Humic acid,bentonite,dolomite,etc Others : Sludge of the rive,the sewer,etc Working principle The process of organic fertilizer production line is as follows: 1.Raw material fermentation – 2 Automatic belt scale batching system —-3 Crushing, mixing — 4 Disc granulation, drum granulation, extrusion granulation —-5 Dryer, Drying Organic Fertilizer Granules—6 Cooling Machine, Cooling Organic Fertilizer Particles—–7 Screening Machine. Screening Out Qualified Organic Fertilizer Particles—–Intelligent Small Fertilizer Equipment|Intelligent Small Organic Fertilizer Production Line L-8 Coating Membrane machine, coated film granules, making the granules smoother—-9 Packing scale, automatic filling organic fertilizer granules –10 seal

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

Compound fertilizer production line is widely applied to produce compound fertilizer and the capacity ranges from 5000-200,000 tons/year. It can granulate NPK, NP, ANP, DAP, MAP, CAN, SSP and other materials into compound fertilizer particles in one processing line. This equipment is specially used for manufacturing compound fertilizers with different concentrations and types, such as organic fertilizers, inorganic fertilizers, biological fertilizers and magnetic fertilizers, etc. It is mainly used for producing spherical particles with a diameter ranging from 1mm to 3mm. The compound fertilizer production line has less investment, quick results and good economic benefits. The whole equipment process is compact, scientific and advanced. Energy saving and consumption reducing, no waste removal, stable operation, reliable running, convenient maintenance. The adaptability of raw materials is wide, and the machine is suitable for the granulation of compound fertilizer, medicine, chemical industry, feed, etc., and the granulation rate is high. This production line can produce various compound fertilizer with different concentration and different types (including organic fertilizer, inorganic fertilizer, biological fertilizer, magnetic fertilizer, etc.). In particular, the granule for tombarthite and ammonium carbide compound fertilizer fills the domestic void and lead the country.  

Product Introduction Organic fertilizer and compound fertilizer are different in shape when the fertilizer particles are formed in the first place, and the particle size is different. In order to make the fertilizer granule look more beautiful, our company has developed a series of fertilizer round polishing machines, such as organic fertilizer round polishing machine and compound fertilizer round polishing machine. Organic fertilizer round polishing machine is the round polishing device based on organic fertilizer, compound fertilizer granulator. Characteristics of PerformanceHigh yield and flexible operation mode. Consistent grain size.Simple structure, easy operation and maintenance. The cylindrical granules can be rolled into balls at a time, without returning material; beautiful appearance, safe and reliable.Good adaptability to environment, low cost and high efficiency; strong anti – overload ability, able to adapt to various environments; low energy consumption and production cost. Working PrincipleThis machine is composed of two or more than two cast cylinder in sequence; the material after multiple centrifugal cast round is being exhausted from port discharge; the particle size of the finished product is uniform; the density is large; the roundness is smooth; the yield rate is as high as 95%.The main raw materials, such as organic fertilizer, compound fertilizer, compound fertilizer, etc.; The main raw materials, such as grass ash, lignite, organic fertilizer sludge, straw and other biological organic fertilizer particles; the round of cake fat pellets, such as soybean cake, etc.

Use of solid-liquid separator It is widely used in the separation of slag-liquid of high concentration organic sewage such as animal manure wine tank dregs starch residue sauce residue of various intensified farms which raise pigs chickens cattle and horses. Characteristics of inclined screen solid-liquid separator(1) It has the functions of sorting and filtering large & heavy materials first and integrates transmission pressing dewatering and sand removal which solves the problems of garbage winding equipment and closed operation.(2) The separation rate of floating suspended matter and sediment in manure can reach more than 95% and the solid content of slag can reach more than 35%.(3) It has automatic liquid level control function which saves more than 50% of electricity consumption and lows operating cost compared to similar equipment.(4) The contact part between the equipment and the treatment medium is made of high-quality stainless steel and is acid-passed and passivated. The corrosion resistance is several times stronger than that of ordinary stainless steel which prolongs the service life. Advantages of inclined screen solid-liquid separator(1) Oblique sieve separator is suitable for solid-liquid separation of low concentration sewage.(2) The inclined sieve type solid-liquid separator requires the moisture content of the material to be more than 90% and the solid content of the material is 0.3mm or more.(3) High processing capacity less solid-liquid loss and the solid content of wastewater after treatment can be less than 1% easy to operate.(4) less investment and small installation area. Application of inclined screen solid-liquid separator(1) Biogas power generation heating.(2) Fertilization of Vegetables farmland fruit trees and forest. It can also be raw materials for organic fertilizer.(3) Sold to organic fertilizer plant as organic fertilizer raw material or self-made organic fertilizer.

This machine can be used to separate water from excrements of livestocks, draff, biogas residue and slurry, kitchen waste, etc. Excrements of livestocks are collected into a collection pond, in which there is a mixer machine that can mix all the excrements continuously. Then, the mixed excrements of livestocks will be lifted to solid-liquid separator machine by clog-free pump. After processing, solid matters drop on the solid material pile that is under solid-liquid separator machine, and the liquid will be drained away to the desilter. After subsiding and composting, the obtained liquid can be diluted as irrigation water. The obtained solid matter contains little water, so it is easy o be transported. It can be used to produce bio-fertilizer or be sold as fertilizer material. Practicability:This kind of machine is high-efficiency. After being processed in the solid-liquid separator machine, the moisture content of solid residue is between 30-45% . The output amount and moisture content can be adjusted. This machine applies to different raw materials that need to be separated. Solid matter is convenient to be transported and it is a good raw material for making fish fodder and bio-fertilizer. Maintenance:In general, the screen of this machine should be cleaned every shift. When cleaning, you should take down the roof cover of the shell, and the you can use water torch to clean stemming.

This automatic column palletizer is a kind of automatic palletizing equipment. The flexible and fast stacking method is an intelligent device that replaces manual palletizing. The palletizer can realize the palletizing of beer, beverage, food, medicine, building materials, chemical industry and other industries. It is widely used in cartons, plastic boxes, bottles, bags, barrels, film-packed products and filled products, which can greatly improve work efficiency, increase the degree of mechanization and automation of palletizing. The operation process of the column palletizer is to send the packaged materials to the palletizing designated area through the conveyor. The column palletizer moves the fixture to the top of the material positioning through the cooperation of each axis. When the material positioning signal is sent, the clamp is controlled by the servo motor to move downward, that is, the Z axis moves downward. When the height of the material clamped by the clamp is reached, the Z axis stops falling, the clamp opens and the material is clamped. Then the Z axis servo motor reverses, and the clamp is raised to a safe height. The material is sent to the top of the stacking position through the customer’s preset program, and the Z axis is lowered to make the material reach the placement point. At this time, the clamp is opened and the material is coded into the designated position. The above actions are repeated until the palletizing is completed.