Agriculture Machinery & Equipment in bulk on Qoovee

Seedling planter

Characteristic: Mixing feeds evenly and making them into grits, which can avoid the waste of feeds, money, time, and size is adjustable. Integrate operation from mixing feeds to making grits means time saving and convenient.   Direction: Pour feeds into the stirring bucket, and mix thoroughly with proper amount of water (or vitamin or other nutriment). After mixing thoroughly (2 ~ 3 minutes), adjust the outlet of the stirring bucket to a proper location and turn on the switch of machine. (With larger outlet, the grain would be longer; with smaller outlet, the grain would be shorter.) With these steps, the manufacture of grain can be accomplished.   Caution: The machine must be cleaned after using. Be aware of losing the oil of variable speed motor.

HDPE Geomembrane Pond Lining If you are interested in this product, please send us your requirements. & nbsp; Feature: < / span> Reduced pond cleaning time, no tillage, increased nesting frequency. Reduce pollution and reduce the risk of disease. More efficient aeration , saving energy. Prevent mixing feed with soil, reducing feed loss. No tillage required, especially suitable for sandy and acidic soils, less lime is used. < span lang = "EN-US"> Water quality can be monitored and improved. < p class = "MsoNormal"> The shrimps could not hide inside the soil during harvest, increase yields and be more productive. One-time investment over 10 years of life.

Feed Size from 0.5~3MM   Characteristic: Double powerful blowing outlets blow feeds far and covers wide area. Single roller distributor can adjust required feeding quantity. Exclusively centrifugal motor. Adopt multi-bladed and aluminum-bladed fan with stable operating. Can be fitted with timer. Applicable for feeding any kind of fish. Stainless steel housing, weather proof and high durability.

Specification: Pressure Performance Table Pressure Performance Curve Noise Level Outline Dimension Structure & Material List Typical Applications   Characteristic: Wide range for air volume, pressure and vacuum. Bore: 25A ~ 300A (1"~12") Capacity: 0.1 ~ 120m3/min. Pressure: 0 ~ 8,000mmAq Vacuum: -5,000mmAq Stable air flow and less pressure variation. Clean air not with oil moist. Solid construction, easy maintenance. Bearings are all lubricated by oil moist, high durability. Made under "ISO9001" system.

SUS316 Material Bore 2" - 8" High Head Large Volume Sea Water Use   Features: Model CT-C pump, pump body, pump up water impeller and enter water access cap, quarry SUS316 cast materials, the axis is a SUS316 material, the mechanical axle seals VFA and VTSIC(Tungsten) material, corrosion-resistant, the stability is high, can give play to extremely high function and lift-span.   Application:  Sea-farming, shipping.

Characteristic: Allowing oxygen transfer into the water quickly. Increase higher efficiency of oxygen transfer, excellent water mixing and circulation pattern. Decomposes harmful material or gas. The circulating water will reactivate with the bottom of the pond, establishing and maintaining a better water quality for the shrimp or fish. Best equipment to be used together with the Paddlewheel Aerator. Farms or ponds, which culture shrimp, fish and any kind of Aquaculture. Treatment for waste water.

Characteristic: Rotation design improves oxygen-content of water, harmful gases escape by water-circulation. Enhance the exchange of gases with the atmosphere and obtains the strongest water current. The unique Aerator Motor Made Under "ISO9001" And "ISO14001" System Suitable for various kind of aquaculture pond : fish, eel, clam, crab, etc.

Characteristic: Providing substantial and stronger water current to improve pond water circulation and oxygenation. With more impellers than normal model, which can benefit a large breeding area, thus, less power consumption and less investment cost. Few aerator is needed, reduce maintenance and labor costs. With diesel engine drive, especially suitable for area without electricity support and for emergency use. "100% New Raw Materials" are guaranteed to be used in our products.

Characteristic: Best Quality Silicon Steel Plate. Energy Saving. High Oxygenation Performance From Unique Design. Sturdy Stainless Steel Frame Ensure Without Any Deformation. Easy Maintenance. The Unique Aerator Motor Made Under "ISO9001"And "ISO14001" System. "100% New Raw Materials"are guaranteed to be used in our products.   Note: Since May 2017 Our New 1 HP / 2 HP three-phase high efficiency electricity saving motors Will Be Launched.  Feel free to contact us if you are interested in our new product.

We are an international trading, marketing, broking and logistic company located in Turkey.We can provide ALL KINDS OF FOODS, ALL KINDS OF CHEMICALS, ALL KINDS OF MINING PRODUCTS, ALL KINDS OF TEXTILES AND MANY MORE.

Grain Drying Machines. In order to protect the product after harvest, it must be dehumidified.

Grain Drying Machines. It is produced as Fixed and Mobile Type from 10m3 Capacity to 75m3 Capacity. It Has 3 Types According To The Fuel Type. Diesel - Gas - Solid Fuel

The PEF-1BM clamshell installation allows you to use a basic tractor as a loader and an excavator. For excavation work, an excavator bucket is supplied for digging trenches and holes. It is powerful enough to work on Category 1 and Category 2 soils. For most agricultural, municipal or construction jobs, the small power range of this excavator will also suffice. Description We present PEF-1BM clamshell installations. PEF-1B-1 telescopic boom loader complete with: grab bucket, bulldozer blade - 460,000 rubles . They are mounted hydraulic equipment for loading bulk and low-flowing materials, piece cargo, silage, haylage. Also suitable for excavation work on loose unfrozen soils (soil of the vegetation layer, loam, oily clay, slag, forest, black soil, soft saline soil, crushed stone and chestnut soil). In addition, the clamshell installation can perform bulldozing operations that do not require a large tractive effort of the tractor. This robust excavator greatly expands the capabilities of basic tractors. It is aggregated with tractors YuMZ and ZTM, and PEF-1BM - with tractors MTZ-80/82. PEF-1BM has a set of interchangeable working bodies: • grab for loading / unloading bulk and low-bulk cargo; • dozer blade for light planning works, raking of submerged material, cleaning of areas. It can also be used to unload wheels and create additional support during excavation work; • excavator shovel for digging holes and trenches; • claws for loading organic fertilizers and fibrous goods. Loader-excavator The PEF-1BM clamshell installation allows you to use a basic tractor as a loader and an excavator. For excavation work, an excavator bucket is supplied for digging trenches and holes. It is powerful enough to work on Category 1 and Category 2 soils. For most agricultural, municipal or construction jobs, the small power range of this excavator will also suffice. For work as an excavator, it can be installed on legs-supports, and also use a dozer blade for additional stability. The rest of the time the blade makes it possible to use it as a light bulldozer loader. PEF grab loader For the convenience of loading and unloading bulk cargo, PEF-1BM has a grab gripper. It is convenient in that it takes the load from above and is able to work with bulk materials without clinging to the surface on which they lie or work through a small partition. In order to load fibrous goods (hay, straw, organic fertilizers) in the same way, the continuous grapple grip can be exchanged for special claws and used as a forklift. Wheel loader In wheel loader mode PE-F-1BM can be equipped with a lifting hook. Thus, it can work with piece and packaged goods. Together with the rest of the removable units, this makes the PE-F-1BM an excellent universal loader-excavator with bulldozer capabilities for performing a variety of economic operations. In addition to the PEF-1BM itself, we also supply additional equipment for loaders. Registration number of the declaration of conformity: TC N RU D-RU.AB24.B.01794 Characteristics of PEF-1BM Carrying capacity, t 1.0 Productivity, t / h 120 Maximum outreach of an arrow along the axis of rotation, m 3.9 Maximum reach of the boom from the jack line, m 3.5 Grab loading height, m 3.7 Loading height (excavator shovel), m 2.5 Lowering depth below the grab support surface, m 2.5 Depth of lowering below the supporting surface with an excavator shovel, m 2.3 Grab volume, m / cube 0.56 Working sector, city 270 Excavator shovel, m / cube 0.27 Coverage of the bulldozer, m 2.0 Weight in delivery condition (without tractor) complete with bulldozer, grab, installation, t 2.012 You can order PEF-1BM for the MTZ, YuMZ tractor, with a retractable boom (+14 tons), without a gearbox with NSh-100 pumps operating from the tractor power take-off shaft. A telescopic loader is currently being developed. Installation on a tractor is also performed.

Roller sorting and inspection table (for manual sorting of fruits and vegetables by quality, color and size). & nbsp; Material of rollers and other parts in contact with food - AISI 304 stainless steel & nbsp; - Conveyor rollers will be made of AISI 304 stainless steel - The legs of the support (adjustable legs) will be made of stainless steel AISI 304 - The hopper will be made of AISI 304 stainless steel - Stands for the lamp (light fittings) will be made of galvanized steel, as they do not come into contact with food - The dividing strips on the table surface will be made of stainless steel AISI 304 & nbsp; - The unloading chute will be made of AISI 304 stainless steel. & nbsp; Productivity: 3 tons per hour & nbsp; Power supply - 50 Hz, 220V Height of the working surface above the floor: 820 mm Height with backlighting: 1600 mm Working surface width: 1200 mm Overall width: 1360 mm Length & nbsp; working surface: 2660 mm Overall length: 3242 mm Hopper dimensions (L x W x H): 400 * 1200 * 300 mm Tray dimensions: (L x W): 150 * 1200 mm & nbsp; Height adjustment: 500 mm Adjustment step: 30 mm Support (legs) construction: pipe in pipe External support legs: 40 * 40 mm Support legs, internal: 35 * 35 mm & nbsp; Roller diameter: 40 mm Weight: 250 kg Control panel: remote Degree of protection: IP65, motor IP54 Power: 0.5 kW Design - With a flow divider for unloading simultaneously into 3 containers. For movement, rubber wheels are provided, & nbsp; variator for adjusting the speed of the conveyor. Light line (two lamps), switch, waste channel in the middle, discharge chute, loading hopper. & nbsp;

Technological table with specially designed workplaces & nbsp; (for bulkhead walnuts). & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; Table surface length: 2200 mm Table surface width: 800 mm Height to table surface: 900mm Height to luminaire: 1715 mm Total table length: 3380 mm Total table width: 800 mm Total construction height: 1715 mm & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; Material of the surface of the table in contact with food - Stainless steel grade AISI 304 & nbsp; & nbsp; Number of jobs: 4 jobs & nbsp; Dimensions of boxes: 400 * 600 mm. & nbsp;

The lift is for lifting and removing carcasses from the overhead track. Ideal for small slaughterhouses as well as medium-sized shops. Raises and lowers: small cattle, cattle, pigs, etc. Various drives Telpher Pneumatic Hydraulics Features Ascent from 2 m Floating element Tube with clip Hot Dipped Galvanized Control Shield

Stationary skinning drum It is used for skinning an animal's ridge from bottom to top or top to bottom. Drum is anchored to the floor or bolted to a twin channel at the level of the overhead track. Skinning is in progress by winding the chain and then the skin itself. In this case, the chain is fixed on the drum with one side. The second side is attached to the skin with a noose. Pull direction: bottom-up or `` top-down '' Construction Drum & mdash; Stainless steel AISI 304 Frame & ndash; Painted / Hot dipped galvanized steel / Stainless steel Drum Drive & mdash; Electric motor Reel width: 1000mm

Angle of rotation of the handle with hook, degrees 320 Minimum distance to the load, mm 1150 Maximum distance to the load (in a straight line), mm 3030 Maximum distance to load (Max / min height), mm 2680 Mount 4 chemical ankers 16 mm. px 10px; border-spacing: 0px; background-color: # f7f7f7; border-radius: 1px; border: none; width : 824.533px; color: # 4c4c4c; font-family: 'Open Sans', Helvetica, Arial, Verdana, sans-serif; font-size: 15px; "> Drive Hydraulics Power supply 380v, 3 phase, 50Hz Power, kW 3 Angle of rotation of the handle with hook, degrees 320 Minimum distance to the load, mm 1150 Maximum distance to the load (in a straight line), mm 3030 Maximum distance to load (Max / min height), mm 2680 Mount 4 chemical ankers 16 mm. merce-product-attributes-item__label" style = "padding: 5px 10px 5px 5px; margin: 0px; border-top: 1px solid rgba (51, 51, 51, 0.12); text-align: left; border-right-color: rgba (51, 51, 51, 0.12); border-bottom-color: rgba (51, 51, 51, 0.12); border-left-color: rgba (51, 51, 51, 0.12) ; "> Maximum moving weight, kg 300 Maximum lifting height of the hook, mm 2670 Minimum drop height of the hook, mm 950 Height in a straight line, mm 1820 The maximum possible angle of rotation of the hook suspension point, degrees 350 Angle of rotation of the rack (first knee), degrees 260 Angle of rotation of the shoulder (second knee with a hook), degrees 300 Angle of rotation of the handle with hook, degrees 320 Minimum distance to the load, mm 1150 Maximum distance to the load (in a straight line), mm 3030 Maximum distance to load (Max / min height), mm 2680 Mount 4 chemical ankers 16 mm.

The desktop intestinal machine is designed for bolting beef, pork and lamb intestines. & nbsp; Specifications: Performance: & nbsp ; & nbsp; 15-20 pork or lamb quiches. & nbsp; sets per hour ( for processing lamb intestines & nbsp; other shafts, must be indicated in the application ) 10-15 beef quiches. sets per hour. power & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 0.18 kW & nbsp ; & nbsp; voltage & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 3 x 230 / 400V & nbsp; & nbsp; 50 Hz Turnovers & nbsp; & nbsp; top roll & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 109 rpm & nbsp; & nbsp; bottom shaft & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 595 rpm Dimensions & nbsp ; mm: & nbsp; < / span> length & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; ; & nbsp; & nbsp; & nbsp; & nbsp; 450 & nbsp; < / span> width & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 220 & nbsp; < / span> height & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 220 Water inlet: pressure & nbsp; MPa & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 0.08 - 0.4 & nbsp; consumption & nbsp; l / min & nbsp; & nbsp; 5 (recommended temperature for processing quiche raw materials + 45-55 degrees)

You can also produce your products in harsh winter conditions in the modern greenhouses we manufacture. Our products used are Steel. With the production of 180 km / H wind resistant construction, we are creating a facility that will minimize the risk in production during winter days under harsh conditions. At the same time, we do not leave you alone in your production process. We control your products 24/7 via satellite by our expert teams and inform you about your products.

We will find machines, equipment, Mini and Large Plants and Factories, bring and install. Quality is our priority

A sprinkler irrigation system is a method of irrigation when water under a certain pressure and angle is sprayed into the air and, under its own gravity, falls onto the irrigated area in the form of raindrops. When watering green spaces using this system, water particles are sprayed into the air using a sprinkler (sprinkler), which is most similar to the effect of rain. The rain irrigation method can be used to irrigate a variety of soils, slopes and plains, and almost all types of plants. During rainwater irrigation, water under pressure reaches the spray nozzles and falls in the form of rain onto the surface of the irrigated area. Since this method of irrigation does not require special physical labor, it is mainly used in those places where labor is not cheap.

Asphalt Distributor Asphalt Distributor, high temperature hot asphalt, SBS modified asphalt, emulsified asphalt, modified emulsified asphalt. It is a high-tech machine that sprays other asphalts through nozzles. It is applied for asphalt distributors, top and bottom sealing layers, primer, waterproofing, bonding layer and other road coating stages. Asphalt Distributor works with high technology developed to meet the new asphalt construction technology at home and abroad. It is a special machine developed for the construction and maintenance of asphalt pavements with reference to similar products in Turkey and abroad, combining similar products with long years of construction experience. With three overlapping asphalt spray patterns, it provides uniform spraying and high precision good atomization effect. The main parts of the machine consist of hydraulic pump, motor, asphalt pump, heat transfer oil pump, air control valve, automatic control system and sensors. It can also be used to transport bitumen or other heavy oil with tanks of Asphalt Distributors. Asphalt Machine

Stainless steel tanks and containers for various purposes. steel grades 304, 201 and 430. The volume of containers and tanks is different from 200 liters and above.

Spare parts for travel and swing reducers. For special equipment, agricultural machinery, freight and passenger transport.

Fuel level sensor with frequency output ETS.F (hereinafter ETS.F) is designed to measure the level of fuels and lubricants (fuels and lubricants), can be used in vehicles and fuel depots, in systems that measure and control the amount of fuels and lubricants: gasoline, diesel fuel, oil. ETS.F measures the level of immersion of the sensor's sensor element in the fuel and generates a frequency signal at the output, proportional to the measured level. ETS.F can be used in a system with display devices or programmable controllers.

Fuel level sensor with interface output ETS.RS (hereinafter ETS.RS) is designed to measure the level of fuels and lubricants (fuels and lubricants), can be used in vehicles and fuel warehouses, in systems that measure and control the amount of fuels and lubricants: gasoline, diesel fuel, oil. ETS.RS performs the functions of determining the fuel level, recalculating the level into volume (in the absence of recalculation tables, the value measured by the sensor is proportional to the fuel filling level), transmission via the RS-232 / RS-485 interface, via the Modbus / Omnicomm protocol, the value measured by the sensor. ETS.RS can be used in a system with display devices or programmable controllers.

CO2 SCRUBERS Any fruit and vegetable products breathe during storage. This is the process during which oxygen is converted to carbon dioxide. Excessive levels of carbon dioxide in the atmosphere of the refrigerator compartment surrounding the stored product can damage it. Therefore, excess carbon dioxide must be removed. One possible way to remove carbon dioxide is by using a CO2 adsorber. A CO2 adsorber is a device that removes carbon dioxide and some ethylene from refrigeration chambers. The CO2 adsorber contains activated carbon, which binds the carbon dioxide molecules when the air from the storage chamber is passed through the adsorber. In addition to the control panel, with the help of which the operating parameters for all refrigerating chambers are programmed, the adsorption device is equipped with a system that does not allow the ingress of oxygen in the air into the chambers during some cycles of the CO2 scrubber. Adjusting the speed of the low-pressure fan helps to reduce the energy consumption of the system, which is an important advantage, since the adsorber can work most of the day. Considering that the respiration rate of different fruit and vegetable products is not the same and the storage volumes at different sites are individual, CO2 adsorbers are produced with different capacities, which allows meeting the needs of all customers.

Pneumatic Drill Hammer ， HY18 / HY20 / Y18 / YT24 / YT28 / Y19A

Portable reciprocating air compressor ， For power supply. ， Please contact me

We are a China hot melt glue machine manufacturer and have been engaged in hot melt glue machine for more than 5 years. Our company supplies various parts for hot melt glue machines, including their spray guns, modules, wire kits, heaters and solenoid valves, etc. We can provide food, pharmaceuticals, beverages, cosmetics and woven fabrics, non-food consumer goods, seeds, cables, book bindings and more. We can provide solutions for cartons, labels, liner nozzles, pallet forming, straws, etc. The hot melt glue machine is widely used in sanitary products such as diapers, sanitary napkins and other hygiene items, and in the production of air filters, non-woven composite materials. , footwear, printing industry, product assembly, clothing, stickers, packaging industry (cartons, cigarette cases, gift boxes, glasses boxes, craft boxes, jewelry boxes, colored boxes, composite covering (label paper, labels, double-sided tape , medical breathable tape), products (household appliances, furniture fittings, wires and cables)

QVS manufactures standard & custom hydraulic repair seal kits, hydraulic seals, pneumatic seals, o-rings (including viton, silicone, and ptfe) and oil seals for industries worldwide. Our products are available in a variety of materials to meet both high & low temperature requirements.

Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System Key words: Lip Shroud for Electric Rope Shovel, Lip Shroud for Cast Lip with V91 Tooth System   A&S Machinery Co., Ltd. supplies Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System which are applicable for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System, A&S Machinery also supply V91 bucket tooth, V91 tooth pin, V91 adapter, wedge, c-clamp, wear cap, wing shroud for electric rope shovel.   If any interest in Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System, V91 bucket tooth, V91 tooth pin, V91 adapter, wedge, c-clamp, wear cap, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

Cast Lip with V91 Tooth, Pin and Adapter for Electric Rope Shovel Key words: Cast lip with V91 tooth, Cast lip with V91 tooth, Electric Rope Shovel Cast Lip with V91 tooth   A&S Machinery Co., Ltd. supplies Cast Lip with V91 Tooth, Pin and Adapter for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides Cast Lip with V91 Tooth, Pin and Adapter, A&S Machinery also supply wedge, c-clamp, wear cap, lip shroud, wing shroud for electric rope shovel.   If any interest in Cast Lip with V91 Tooth, Pin and Adapter, wear cap, wedge, c-clamp, lip shroud, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

V91 Bucket Tooth Adapter for Electric Rope Shovel Key words: V91 Bucket Tooth Adapter, V91 electric shovel tooth adapter, V91 c-clamp    A&S Machinery Co., Ltd. supplies V91 Bucket Tooth Adapter for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides V91 Bucket Tooth Adapter, A&S Machinery also supply cast lip with V91 tooth system,  V91 bucket tooth, V91 tooth pin, wedge, c-clamp, wear cap, lip shroud, wing shroud for electric rope shovel.   If any interest in V91 bucket tooth adapter, wear cap, wedge, c-clamp, cast lip with V91 tooth, bucket tooth, lip shroud, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

V91 Bucket Tooth Pin for Electric Rope Shovel Key words: V91 Bucket Tooth Pin, V91 electric shovel tooth pin, V91 bucket tooth wedge, V91 c-clamp,    A&S Machinery Co., Ltd. supplies V91 Bucket Tooth pin, wedge, c-clamp for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides V91 Bucket Tooth pin, wedge, c-clamp, A&S Machinery also supply cast lip with V91 tooth system, V91 bucket tooth, V91 adapter, wear cap, lip shroud, wing shroud for electric rope shovel.   If any interest in V91 bucket tooth pin, wedge, c-clamp, V91 adapter, wear cap, lip shroud, wing shroud, cast lip with V91 tooth system for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

V91 Bucket Tooth/Tooth Tip/Tooth Point for for Electric Rope Shovel Key words: V91 bucket tooth, V91 tooth tip, V91 tooth point, V91 electric shovel tooth   A&S Machinery Co., Ltd. supplies V91 Bucket Tooth/Tooth Tip/Tooth Point for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides V91 bucket tooth/tooth tip/tooth points, A&S Machinery also supply cast lip with V91 tooth system, V91 tooth pin, wedge, V91 adapter, lip shroud, wing shroud for electric rope shovel.   If any interest in V91 bucket tooth/tooth tip/tooth points, cast lip with V91 tooth system, V91 tooth pin, wedge, V91 adapter, wear cap, lip shroud, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

The floating pump is designed to deliver high amounts of water, drain lagoons resulting from flooding, replenish fire engine tanks with water from outdoor natural water sources. It can also be used in other applications, such as agriculture, building sites, etc. Main specifications: Max. flow 2 400 l/min Total head 22 m Discharge connection Storz A110 (4”) Engine Honda GXV 390 Engine power 7.6 kW / 10.2 HP / 13HP (SAEJ1995) Fuel tank capacity 2.1 l Fuel unleaded petrol (BA 95) Float dimensions (L x W x H) 980 x 710 x 200 mm Device dimensions (L x W x H) 1080 x 730 x 500 mm Dry weight (empty) 53 kg Cat. number vv 287 The pump and the engine are in one unit, so the pump cannot be used independently. The engine shaft goes through the pump block without a sealing. The pump block is bolted to the engine through the supporting plate and the pump cannot be connected to any other engine type. The bottom side of the block is fitted with a cover to prevent debris and particles over 20 mm in diameter. The delivery outlet is fitted with an A 110 (4") Storz coupling. The float body is made of polyethylene by centrifugal injection as one block. The internal wall has about 20 mm of hard polyurethane foamin order to increase resistance to breakthrough which guarantees unsinkability of the device. This design of the float features outstandingstability on the water surface. The frame is used both for carrying and handling the unit and also for fixing a rope to secure it in its position.The design of the pump allows dry-running without damage. The data was measured by the accredited testing laboratory TÚPO No. 1011-2

The floating pump can be used by fire brigades to replenish fire engine tanks with water from outdoor natural water sources. It can also be used to pump out water from flooded areas and rooms and for other applications, e.g. agriculture, building sites, etc. The new float body is made of polyethylene by centrifugal injection as one block. The floater with its new design is equipped with a removable tank. The tank is connected with a fuel hose to the original fuel system. This modification extends the pumps run time for several hours without refilling. The integrated handles make it easy to handle and carry the pump and can also be used to fix a rope to prevent the pump from floating away. The design of the pump allows dry-running without damage. Main specifications: Max. flow 1 145 l/min Total head 37 m Discharge connection Storz B75 (2,5") Engine Briggs & Stratton 850 Series Engine power 4,1 kW / 5,5 HP Fuel tank capacity 1 l Fuel capacity additional tank 3,8 l Fuel unleaded petrol (BA 95) Float dimensions (L x W x H) 710 x 610 x 375 mm Device dimensions (L x W x H) 710 x 610 x 400 mm Dry weight 24,5 kg The data was measured by the accredited testing laboratory TÚPO No. 1011-2