Construction Machinery & Equipment in bulk on Qoovee

Description Decorative panel size: 140 * 120 mm.In the package: 42 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   With a stationary machine SUMAB R-1500 you can produce the following products: Empty blocks Curbstones Paving stone Tiled stone Capacity (per shift): Paving stone (10x20x6 cm) – 2000-2600 m2 Hollow block (20x20x40 cm) – 23000 pieces Curbstone – 2800-4000 pieces depending on the size of the curbstones, without or with face mix. Pallet size max: 1400x1100 mm. Useful area max: 1300x1050 mm. If you choose the fully automatic block machine, you will receive an Internet modem as a gift!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training The plant is designed on a container frame.4 aggregate storages,Planetary mixer 1800/1200 liters.Additive pump, high pressure compressor.Computer Siemens (100 concrete sorts).Concrete plants SUMAB are a guarantee of quality, durability and reliability. Batching plant is produced by Scandinavian technology, using components from the leading European manufacturers! Scandinavian quality at the best price!If you need more information, you can visit our website, or send a request. We will necessarily find the best solution for you!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training     Mobile concrete plant SUMAB MINI designed on long legs. Does not require the installation of a conveyor belt! This allows you to save on purchasing a conveyor belt and place the plant on a small site or indoors, without losing productivity & quality.  Main technical data: - 2 aggregate storages; - planetary mixer 560/375 liters; - water tank 200 liters; - automatic control of a plant: computer (20 concrete receipts).

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training 4 aggregate storages 2,4 m3 eachPAN MIXER 2250/1450 LitresComputer Siemens (100 concrete sorts).3 weighing cells under the mixer allows +-1% toleranceChemical additive pump for 2 types of additivesWater tank 200l with water counterEquipped with special hooks for transportationReady to produce concrete within 3 hours after delivered to the site!Easy to transport from site to site!Perfect match for medium/big scale projects!Scandinavian quality plant is better than 2 cheap or used plants!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   4 total storage tanks with 3.8 м3 each, with the boards being increased to 5 m3   Pan mixer 1800 \ 1200 liters, coated with 12 mm layer of special steel. Automatically opens the damper supply for precast concrete. 5 mixing arms.   The special arrangement of the arms in the pan mixer means that all parts of the mixer can be covered during the batch, which means that a high-quality concrete is achieved.   Mobile concrete plant with comfortable cabin and automatic control of the system. The modern Siemens computer system enables the production of 100 recipes and types of concrete. You can print any mix of finished batches in kilograms and percentages to prevent cement or aggregate theft while making a concrete mix. Advantages of the SUMAB K-60 mobile concrete plant • Concrete production is already possible within 3 hours after delivery of a system to the work area! • Mobile concrete plants can easily be moved from one object to another. • You do not need a foundation or agreements to install a concrete plant! • The mobile concrete plant can be installed on any flat surface with minimal dimensions of 15 to 20 meters. • Siemens computer enables one person to control the system.   Mobile concrete plant suits you if: • You are working with a government project. • The work is carried out over a long distance and it is necessary to change the location of the plant. • You take part in tenders in various regions. • Increased demands on the environment. • You have a temporary location for the system or a temporary project. • You feel very comfortable in your region. Projects elsewhere are planned. • You need a quick repayment.

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   SUMAB MINI is suitable whether you produce concrete for your own project or concrete element production.Easy put it inside the building and build your concrete element factory.Many companies intend to develop new products or develop process of production from manual to automatic.There is why they need the mini plant!Designed on a container frame.2 aggregate storages,pan-mixer 500/300 liters.Water tank 200 liters.Automatic control of a plant: computer (20 concrete recipes).Concrete plant made by SUMAB is a definition of quality, durability and reliability. Batching plant is produced by Scandinavian technology, using components from leading European manufacturers! Scandinavian quality at the best price! If you need more information, you can visit our website, or send a request. We'll necessarily find the best solution for you!  

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training The mobile concrete batching plant Sumab K-40 is intended to produce high-quality concrete and concrete mixes. Exact performance of plant capacity depends on type and mark of produced concrete and on used aggregates, cement and quantity of chemical additives. Batching plant is mounted on a container frame and can be transported on a 40 foot open top container.4 aggregate storages, mixer 1500/1000 liters. Additive pump, high pressure compressor. Computer Siemens (100 concrete sorts). Batching plant equipped with comfortable cabin and system of automatic control of the plant. Modern computer system Siemens enables to produce 100 recipes and sorts of concrete. You can print each mixture of ready batch in kilograms and percent, that prevents the theft of cement or aggregates in the preparation of a concrete mix.Optionally can be delivered: cement silo, cement screw, belt conveyer of supply ready-mixed concrete from the mixer. If you need more information, you can visit our website, or send a request. We will necessarily find the best solution for you! We are ready to invite you to see our existing concrete plants, which were manufactured in 1980-s. They are still in the ranks!Concrete plants SUMAB are a guarantee of quality, durability and reliability. Batching plant is produced on Scandinavian technology, using components from leading European manufacturers! Scandinavian quality at the best price!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   Fully automatic batching plant. The plant is designed on a container frame. 4 aggregate storages, turbine type mixer 1200/800 liters. Water tank 250 l. Automatic control of a plant: Computer Siemens (100 concrete recipes). Control room container 2,5 x 2,5 x 2,95m. Swedish quality. Good price. Mobile concrete plant is equipped with a comfortable cabin and system of automatic control of the plant. Modern computer system Siemens enables to produce 100 recipes and sorts of concrete. You can print each mixture of ready batch in kilograms and percent, that prevents the theft of cement or aggregates in the preparation of a concrete mix.

Cutting machine: Rated voltage (V): 220 Rated frequency (Hz): 50 Cutting disc diameter (mm): 110 Max. cutting depth (mm): 30 Rated power (w): 1200 Rated speed (r / min): 13000 Net (kg): 3.0

Engine block water plugs are a long-lasting product made of quality steel produced on cnc machines of all sizes

Power tool set with charger

Wall surface sander: Rated voltage (V): 220 Rated frequency (Hz): 50 Sandpaper diameter (mm): 225 Rated power (w): 1050 Rated speed (r / min): 600-2600 Poppy. grinding height (m): 3.3 Net (kg): 4.5

Spray gun: Rated voltage (V): 220 Rated frequency (Hz): 50 Rated power (w): 1500 Idling speed (r / min): 4500 Poppy. working pressure (Mpa / psi): 22/3200 Poppy. flow (L / min): 3 Net (kg): 16.8

Angle grinder (grinder): Rated voltage (V): 220 Rated frequency (Hz): 50 Max disc diameter (mm): Ф100 DISC UP TO (mm): Ф16 Rated power (w): 710 Rated speed (r / min): 13000 Net (kg): 1.6

Diamond discs on asphalt When repairing roads, situations often arise when it is necessary to remove the asphalt layer. Nowadays a very convenient diamond cutting technology is used for this. It is carried out using special cutters and diamond segment discs on the asphalt. These cutters are mostly gasoline powered and not dependent on electricity. This makes them mobile. In addition, they are equipped with a guide wheel, which allows you to cut straight lines without extra effort.

After many research trials, IDP found that if the properties of the stamping parts are applied well, they can greatly enhance the performance of the gearbox. As an example, the bottom cover of a gearbox can be made by a stamping plate, which can both tighten the tolerance of the center distance for gears, and increase the overall strength of the gearbox.

O-rings currently on the market often fail to meet the sealing requirements of IDP, especially with regard to the sealing effect on the rotating shaft. As a result, IDP has developed its own line of well-sealed, wear resistant O-rings to enhance the efficiency of the gearbox and the pump.

IDP utilizes special engineering plastics to make low-friction and high strength nuts. We also adjust thread parameters to minimize the gap. The screw nut set we produce can replace most of the applications of ball screws for just a third of the cost.

1.Маленький станок  (Модель: ЛМ25-16, ЛМ25-25) Материал: Лист может из железа , алюминиевого листа , нержавеющей стали и т.д. Применение : Станок используется в механизме , нефти , трансформаторе , строительстве , метале , защите и т.д. Основные параметры : Модель Толщина листа Ширина листа Скорость Ребро (Росстояние подачи листа) Длиная диагональ ячейки Мощность Вес Габариты ЛМ25-16 0.2-1.0мм ≤1000мм 150 рядов/мин 0-1.2мм 25мм 3 KW 2000кг 1.74*1.4*1.5м ЛМ25-25 0.2-1.5мм ≤1250мм 150рядов/мин 0-1.2мм 30мм 4 KW 3000кг 1.94*1.6*2.01м   2. Тяжелый станок (Модель: ЛМ25-100, ЛМ25-160B) Применение :Станок используется в судостроении ,руднике ,механизме , нефти , трансформаторе , строительстве , метале , защите и т.д. Основные параметры : Модель Толщина листа Ширина листа Скорость Ребро (росстояние подачи листа) Длиная диагональ ячейки Мощность Вес Габариты ЛМ25-100 0.5-4.0мм ≤2000мм 60рядов/мин 0-4мм 150мм 18 KW 12т 3.6*2.5*3.0м ЛМ25-160В ≤6.0мм ≤2000мм 45рядов/мин 0-7мм 160мм 30 KW 21т 3.0*3.2*4.11м   3. Мини-станок (Mодель: ЛМ25-6.3A , ЛМ25-6.3B) Этот мини-станок разделится на две модели :ЛМ25-6.3А и ЛМ25-6.3В. Машина может производить лист с мак. толщиной 1мм и мак шириной 500мм. Модель ЛМ25-6.3В применяет передовые техники ,например бесступен чатное изменение скорости , автоматическая отрезка , безмасляная смазка и т.д.   Материал :Лист может из железа , алюминиевого листа , нержавеющей стали и т.д. Применение : Этот станок может использоваться в лёгкой промышленности ,электроаппрате , бефере , метале , микроэлементе, и т.д. Основные параметры : Модель Толщина листа Ширина листа Скорость Ребро (Росстояние подачи листа) Длинная диагональ ячейки Мощность Вес Габариты ЛМ25-6.3А 0.1-1.0мм ≤500мм 180рядов/мин. 0-1.2мм 20мм 2.2 KW 950кг 1.09*0.71*1.45м ЛМ25-6.3В 0.1-1.0мм ≤500мм 200-400рядов/мин. 0-1.6мм 10мм 2.2 KW 950кг 1.09*0.71*1.45м   4. Средний станок (Модель: ЛМ25-63) Этот станок может производить лист с толщиной 2.5мм и мак. Шириной 2000мм. Применение:Станок используется в судостроении ,руднике ,механизме , нефти , трансформаторе , строительстве , метале , защите и т.д.   Основные параметры :   Модель Толщина листа Ширина лсиста Скорость Рероб (Росстояние подачи листа) Длинная диагональ ячейки Мощность Вес Габариты ЛМ25-63 0.5-2.5мм ≤2000мм 70рядов/ мин 0-4мм 100мм 11 KW 11т 2.4*3.5*23м    

1. This machine adopts electrical synchronous control technology. The welding process and welding time are controlled by a digital integrated electrical circuit. The welding process is stable and accurate. Welded joints have a small contact patch, are free from defects and have high strength.   2. The machine pulls longitudinal and transverse wire segments from a coil of wire.   3. This equipment is equipped with a special device for cutting wire (the device is protected by the state patent ZL2208722.2), as well as a system for determining the position of the cells (patent AL02208721.4), thus, the distance between the mesh elements is the same and constant, which is necessary for cutting the resulting product. ...   4. The machine has a mesh pulling system that cuts the wire mesh elements under    the action of a mechanical load (the system is protected by the state patent ZL200520024380.9) and a grid positioning device. This allows you to control the holes of the wire loops and the open part of the mesh more closely, and more accurately to carry out the welding operation.     Item Model L M- 189 wire diameter 1.8-3.5 mm Longitudinal wire feed Continuous wires Cross wire feed Breaking wires Cell 50 * 50-200 * 200mm Food 380v 50hz Power 189 kVA Number of electrodes 2 4 Mesh width 1 200 mm Poppy. speed 45 deliveries / min Weight 3.2 T Dimensions (edit) 1.8 * 2.5 * 1.8m  

Model LM- 2000 Mesh width 2000mm Poppy. number of electro in 40 Wire diameter 3.0-5.0mm Cell 50 * 50-200 * 200mm Cross wire feed mode From hopper Longitudinal wire feed mode From coil Adjusting the size between the longitudinal wires manually Adjusting the size between the cross wires automatically Poppy. welding speed 45 rows / min Net type In rolls or cards Material low carbon, galvanized wire Power 380v 50HZ

Parameters Mesh: 30-80mm Wire diameter: 2-4mm (depends on the width of the chain-link) Chain-link width: 2,3,4m Speed : 200-500 (frequency adjustable) Total power: 9.6 kw (4 motors) Chain-link - edge with bent or pinched Wire diameter specifications chain-link width (mm) thirty 40 fifty 60 70 80 diameter (mm) 2.0-3.5 2.0-3.5 2.0-3.5 2.0-4.0 2.0-4.0 2.0-4.0   Reminder : The stiffness of the steel wire package must be uniform in order to produce normally. Attention : we can also manufacture the machine according to your requirement.

Features of work: Electric motor The machine works with electric synchronous control technology. The welding process and welding time are set by the programmable logic controller system. The input panel is a touch screen and keyboard, which makes programming the machine more logical and intelligent. The machine is powered by an electric motor, regulates the welding pressure easily and conveniently, has a loading chute that is transmitted from a stepper motor, freely adjusts the cell size in the area, the longitudinal wire is fed and the mesh is pulled out by a stepping motor. The longitudinally and transversely fed wire is pre-straightened and cut. Main settings Model LM-MK Wire diameter 6-8mm Rated voltage 380v Rated power 441kVA Number of electrodes 14 Cell size 100 * 100-150 * 150mm Mesh length 1300-2600mm Net width 1300mm Welding speed 40 rows / min Dimensions 7280mm × 4110mm × 1945mm

1. This equipment is our latest developed welding equipment. for the manufacture of reinforcing mesh, powered by an electric motor.     2. Longitudinally and transversely fed wire is pre-straightened and cut. The servo-fed longitudinal wire moves the resulting mesh automatically.   3. The force on the welding machine is transferred from the electric motor, so that the pressure on the welding electrodes can be easily controlled. The cross wire is fed from a universal feed hopper, which is ten times larger than a conventional feeder, up to 1 ton at a time.   4. This equipment also has a wire tool tray, which makes the operation more convenient. The welding unit of the machine has elastic hoppers that allow using the welding electrode for a longer time. The machine works with electric synchronous control technology.   5. Welding process and welding time are set by the programmable logic controller system. The input panel is a touch screen, which makes programming the machine more logical and intelligent.   6.   This year we started using water cooled transformers. These transformers are equipped with a cooling unit and a heat dissipation system that allows the excess heat to be removed in a timely manner. Despite the fact that the diameter of the machine has become larger, this did not affect its performance.   Technical specifications   Item Model L M-12 wire diameter 5.0-12.0mm Longitudinal wire feed Breaking wires Cross wire feed Breaking wires Cell 100 * 100-300 * 300 Food 400-1000v Number of electrodes 24 Mesh width 1100-2500mm Poppy. speed 50 r i dov / min Dimensions (edit) 26 * 5 * 2.3m Poppy. length 12000mm Weight 14T

1.The machine works with electric synchronous control technology. The welding process and welding time are set by the programmable logic controller system.   2. The input panel is a touch screen and a keyboard, which makes the programming of the machine more logical and intelligent, also has the following features: firmly squeeze once; multiple welding.   3. The machine is powered by an electric motor, has a loading chute that is powered by a stepper motor, a longitudinal wire fed by a brake motor, and pulls out the mesh using a stepper motor.   4. The longitudinally and transversely fed wire is pre-straightened and cut and therefore only a mesh is obtained with a card. The advantage of this machine: it is possible to have different cells between the longitudinal wires.   Technical specifications   Item Model L M-3A L M-3A / 250 L M-3A / 210 L M-3A / 120 Mesh width 900-2500mm 900-2100mm 900-1200mm Poppy. number of electrodes 48 42 24 Longitudinal wire diameter 3-6mm Cross wire diameter 3-6m m Distance between longitudinal bars 50-300mm Distance between cross bars 25-300mm Poppy. mesh length 6000mm Longitudinal and cross wire feed cut wire from the hopper Poppy. welding speed 50 rows / min Mesh type In card x Material low carbon, galvanized wire Food 380 V Dimensions (edit) 8 * 3.2 * 1.75m 8 * 2.8 * 1.75m 8 * 1.8 * 1.75m Application : Manufacturing is mainly used for expressway, railway, airport, and housing, also shopping carts,   display shelves etc. ...  

Material: Low carbon (black or galvanized) or stainless wire. The machine has a closed correct system, vertical gearbox , and electromagnetic stepless speed regulation. & nbsp; You can get strong and even cells. Welding is controlled three-phase electron and electricity. & nbsp; The machine will stop working automatically by the CNC when the length has reached the desired length. Welding power is large, regulation control is excellent. < / span> (Cross wire feed by rotating shuttle) & middot; & nbsp; </ span> Model Item Л М-4X1 & rsquo; & rsquo; Л M-5x1 & rsquo; & rsquo; Л M-6x1 & rsquo; & rsquo; & nbsp; Л M-7x1 & rsquo; & rsquo; Л М-2.5mx1 & rsquo; & rsquo; Grid Width 914.4-1219, 2mm 914.4-1524mm < / span> 1219.2-1828.8mm </ span> 1828.8-2133, 6mm 1828.8-2500mm < / span> Cell < / p> 1 & rsquo; & rsquo; -4 & rsquo ; & rsquo; （ 6 & rsquo; & rsquo; ） </ span> Wire diameter 1.4-2, 7mm Speed ​​ < / p> 60-80 rows / min Food < / p> 380 / 220V, 50- 60HZ Mac. roll length 80m Dimensions < / p> 2.7 * 1, 75 * 1.45m 3.1 * 1, 75 * 1.45m 3.5 * 1, 75 * 1.45m 3.9 * 1, 75 * 1,5m 4.3 * 1.75 * 1.5m Material < / p> low carbon, galvanized wire </ span> & nbsp; Machine for the production of welded prairie mesh fence (Model Л M- 7X1-A, L </ span> М-2,5МХ1-А) Item & nbsp; & nbsp; Model Л М- </ a> 7X1-A Л M- 2,5МХ1-А Wire diameter 2-3mm </ span > Cell 1 & rsquo; & rsquo; -12 & rsquo ; & rsquo; (25.4mm-304.8mm) Speed ​​ < / p> 40-50 rows / min Fingering < / p> 380 / 220v, 50- 60HZ Mac. roll length 100m < / p> Dimensions < / p> 4.1 * 2.1 * 1.8m </ span > < span style = "mso-spacerun: 'yes'; font-family: Arial; mso-fareast-font-family: 'Lingoes Unicode'; color: # 000000; font-size: 12.0000pt; mso-font-kerning: 0.0000 pt; "> 4.5 * 2.1 * 1.8m Material low carbon, galvanized wire </ span> Grid Width 2133.6-1828.8mm </ span> 2500-1828.8mm </ span> & nbsp; </ p > Medium Welding Machine </ p> Item & nbsp; & nbsp; & nbsp; Model Л М-4Х1 / 2 < / p> Л М-5Х1 / 2 < / p> Л М-6Х1 / 2 < / p> Cell 1/2 & rsquo; & rsquo; -1 & rsquo; & rsquo; (12.7mm, 25.4mm) Grid Width 914.4-1219.2mm < / p> 914.4-1524mm </ p > 1219.2-1828.2mm < / p> Wire diameter 0.7-1.6mm < / p> 0.7-1.6mm 0.9-1.6mm < / p> Speed ​​ 100 lines / min 85 lines / min 70 lines / min Mac. roll length 100m Food 380V / 220V, 50-60HZ Dimensions 2.7 * 1.75 * 1.45m 3.1 * 1.75 * 1.45m < / span> 3.5 * 1.75 * 1.45m < / span> Material low-carbon, galvanized wire & nbsp; </ p > Item & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp ; & nbsp; Model Л М-4Х1 </ p > Л М-5Х1 </ p > Л M-6X1 Cell 1 & rsquo; & rsquo; -4 & rsquo; & rsquo; (25.4mm , 50.8mm, 76.2mm, 101.6mm) Grid Width 914.4-1219.2mm < / p> 914.4-1524mm </ p > 1219.2-1828.2mm < / p> Wire diameter 0.8-1.8mm < / p> 0.8-1.8mm < / p> 1.2-1.8mm < / p> Speed ​​ 100 lines / min 90 lines / min 70 lines / min Mac. roll length 100m Food 380V / 220V, 50-60HZ < / p> Dimensions 2.7 * 1.75 * 1.45m < / span> 3.1 * 1.75 * 1.45m < / span> 3.5 * 1.75 * 1.45m < / span> Material low carbon, galvanized wire & nbsp; </ p > & nbsp; </ p > Small welding machine </ p> Item Model Л М-4х1 / 2 Л М-5x1 / 2 Cell < / p> 1/2 & rsquo; & rsquo; -1 & rsquo; & rsquo; (12.7mm-25.4mm) Wire diameter 0.55-0, 9mm & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 0.6-1, 0mm Width < / p> 1219.2-914.4mm </ span> 1524-914.4mm </ span> Speed ​​ < / p> 120 lines / min & nbsp; & nbsp ; & nbsp; & nbsp; & nbsp; & nbsp; 90 lines / min </ span > Food < / p> 380 / 220V, 50- 60HZ Max roll length 120m < / p> Dimensions < / p> 2.7 * 1, 75 * 1,4m & nbsp; 3.1 * 1, 75 * 1.4 Material < / p> low carbon and galvanized wire < span style = "mso-spacerun: 'yes'; font-family: Arial; mso-fareast-font-family: 宋家; font-size: 12.0000pt; mso-font-kerning: 0.0000pt;"> Mini </ span > - < / span> welding & nbsp; car & nbsp; Clause < span style = "mso-spacerun: 'yes'; font-family: Arial; mso-fareast-font-family: 'Lingoes Unicode'; color: # 000000; font-size: 12.0000pt; mso-font-kerning: 0.0000 pt; "> Model Л М-3Х1 / 4 Л М-1Х1 / 4 Л М-4Х1 / 4 Л М-5Х1 / 4 Grid Width 914.4MM </ span > 1000mm < / p> 1219.2mm </ span > 1524mm < / p> Cell < / p> 6.35-12, 7mm Wire diameter 0.35-0.75mm Speed ​​ < / p> 100 lines / min </ span > Food < / p> 380 / 220V, 50-60HZ </ span> Mac. roll length 150m < / p> Dimensions < / p> 2.15 * 1, 8 * 1.7m 2.45 * 1, 8 * 1.7m 2.75 * 1, 8 * 1.7m 3.0 * 1, 8 * 1.7m Material < / p> low carbon, galvanized wire </ span> & nbsp; </ p > Heavy & nbsp; welding machine Clause < span style = "mso-spacerun: 'yes'; font-family: Arial; mso-fareast-font-family: 'Lingoes Unicode'; color: # 000000; font-size: 12.0000pt; mso-font-kerning: 0.0000 pt; "> & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; Model Л М-6Х1 / 2 Л M-2mX1 / 2 Л М-7Х1 / 2 Grid Width 1828.8mm </ span > 2000mm 2133.6mm </ span > Cell < / p> 1/2 & rsquo; & rsquo; (12.7mm) Wire diameter 0.5-1, 1mm Speed ​​ 70 lines / min </ span > Food < / p> 380 / 220V, 50- 60HZ Mac. roll length 70m < / p> Dimensions < / p> 3.05 * 1, 9 * 1,75m 3.35 * 1, 9 * 1,75m 3.75 * 1, 9 * 1,75m Material < / p> low carbon, galvanized wire & nbsp; </ p > <! - [if gte mso 9]> 1 </ o: Revision> 1 </ o: Pages> 1 </ o: Lines> 1 </ o: Paragraphs> </ o: DocumentProperties> <! [Endif] -> <! - [if gte mso 9]> < xml> </ o: OfficeDocumentSettings> <! [endif] -> <! - [if gte mso 9]> MicrosoftInternetExplorer4 </ w: BrowserLevel> 0 </ w: DisplayHorizontalDrawingGridEvery> 2 </ w: DisplayVerticalDrawingGridEverytical> DrawingNotSpecified> </ w: DocumentKindacing 8 / w: DrawingGridVerticalSpacing> </ w: PunctuationKerning> Normal </ w: View> </ w: Compatibility> 0 </ w: Zoom> </ w: WordDocument> <! [endif] -> < ! - [if gte mso 9]> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> <! [endif ]--> <! - [if gte mso 9]> 1 </ o: Revision> 1 </ o: Pages> 1 </ o: Lines> 1 </ o: Paragraphs> </ o: DocumentProperties> <! [Endif] -> <! - [if gte mso 9]> </ o: OfficeDocumentSettings > <! [endif] -> <! - [if gte mso 9]> MicrosoftInternetExplorer4 </ w: BrowserLevel> 0 </ w: DisplayHorizontalDrawingGridEvery> 2 </ w: DisplayVerticalDrawingGridEvery> DocumentNotSpecified </ w: DocumentKind> 7.8 磅 </ w: DrawingGridEvery> w: PunctuationKerning> Normal </ w: View> </ w: Compatibility> 0 </ w: Zoom> </ w: WordDocument> <! [endif] -> <! - [if gte mso 9]> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> </ w: LsdException> <! [endif ]-->

1.The machine works with electric synchronous control technology. The welding process and welding time are controlled by a digital integrated electrical circuit. The welding process is stable and accurate.   2. Welded joints have a small contact patch, have no defects and have high strength.   3. The machine pulls the longitudinal wire segments from the wire coil. This equipment is equipped with a special device for cutting wire, as well as a system for determining the position of the cells, thus, the distance between the mesh elements is the same and constant, which is necessary for cutting the resulting product.   4. The machine has a net pulling system, which cuts off the wire elements of the net under the action of mechanical load and a net positioning device.   5.This allows you to control the holes of the wire loops and the open part of the mesh more closely, and more accurately carry out the welding operation.   6. Welding mesh can be obtained by roll or card.   Technical specifications   Model LM-2500 LM-2100 LM-1200 Mesh width 900-2500mm 900-2100mm 900-1200mm Poppy. number of electrodes 48 42 24 Wire diameter 3.0-5.0mm Cell 50 * 50-200 * 200mm Cross wire feed mode From hopper Longitudinal wire feed mode From coil Setting up a cell manually Poppy. welding speed 45 rows / min Net type In rolls or cards Material low carbon, galvanized wire Power 380v 50HZ

All of these parts required multiple slides and core pulls. Automotive parts are rigorously tested. There is no defect in appearance, which is the user's first instinct for the product. Therefore, the polishing process and surface process of our mold will take a lot of time. It is worth mentioning that the mold must have long-life production conditions. Because the mold design is approved by the customer. It must produce at least 500,000 to 2,000,000 good plastic parts that can be produced by molding, which is a very easy to implement design and fabrication condition for Pacmold. The molds designed by Pacmold can also be customized according to the customer's production conditions, greatly increasing the production speed.

Rearview Mirror and A/C Controller Mold Automotive Plastic Mold Rearview and A/C controller have multiple lifters and run automatic.   Automotive parts are rigorously tested. There is no defect in appearance, which is the user's first instinct for the product. Therefore, the polishing process and surface process of our mold will take a lot of time. It is worth mentioning that the mold must have long-life production conditions. Because the mold design is approved by the customer.It must produce at least 500,000 to 2,000,000 good plastic parts that can be produced by molding, which is a very easy to implement design and fabrication condition for Pacmold. The molds designed by Pacmold can also be customized according to the customer's production conditions, greatly increasing the production speed.

Auto parts

Double Rotary Leveling Shovel

Good day,Enterprise MUKA MAK İ NA İ N Ş AAT SAN. Ve Tic. A.Ş. In the person of the General Director Emre Kaya which is located in the city of Samsun Turkey, has faithfully served the crushing and screening machinery industry for 30 years, asks you to provide competent assistance in finding partners in Russia and the CIS countries, specializing in the production and processing of nonmetallic materials (mines, quarries), concrete, as well as road construction. Thus, we plan to develop trade relations in Russia and the CIS countries. We hope that you will not refuse to support us, and we look forward to your response.   With respect Alikhan Suleimanov Export Sales Manager

Good day,Enterprise MUKA MAK İ NA İ N Ş AAT SAN. Ve Tic. A.Ş. In the person of the General Director Emre Kaya which is located in the city of Samsun Turkey, has faithfully served the crushing and screening machinery industry for 30 years, asks you to provide competent assistance in finding partners in Russia and the CIS countries, specializing in the production and processing of nonmetallic materials (mines, quarries), concrete, as well as road construction. Thus, we plan to develop trade relations in Russia and the CIS countries. We hope that you will not refuse to support us, and we look forward to your response.   With respect Alikhan Suleimanov Export Sales Manager

Supply of shut-off valves, gate valves, ball valves, gates, any construction and other equipment directly from the manufacturer Provision of advisory and other services for the implementation and development in the market of Uzbekistan and Central Asia

Fuse box (2 inserts, 90-60 A) Article: BPR-2M1 F5.3722.005-02 Manufacturer: Copier

Speed sensor GAZ-3110, GAZ-3302 Business (6 imp / rev, round connector) Article: 342.3843 Manufacturer: Schetmash

Diode bridge VAZ-2110-12 gen. 9402, 9412 (Orbit) Article: BVO 3 105-01 Manufacturer: Orbit

Pedestal Plastic

Rope slings 2sk - lifting devices designed for rigging. ... A two-branch sling is made of steel cables, to the ends of which hooks, links, staples are attached. Consists of two cable (rope) branches connected together. Manufacturing plant Stalprom (Russian Federation)