Construction Machinery & Equipment in bulk on Qoovee

Own production of scraper chains for roadheaders Ksp-32, 1Pnb2 type 2pnb2, 1GPKS, Kp-21, ksp-35, 1p110 , 2п110

The entire line of bearings for cars produced by VAZ (LADA), GAZ, UAZ is fully available Production - SPZ-4, Samara Passports GOST 520-2011, Certificate of Conformity Warranty, postponement, delivery

FEATURES: HAND AND FOOT CONTROLS, AUXILIARY HYDRAULICS, 81HP KUBOTA PRE DEF DIESEL, BRAND NEW QUICK ATTACH, GOOD CONDITION TRACKS THESE MACHINES ARE VERY SIMPLE TO WORK ON AND EASY TO OPERATE 10,000 LBS MACHINE FINANCE AVAILABLE!!! FREIGHT AVAILABLE!!!

Welding Robot Brief Introduction The welding robot is an industrial robot engaged in welding, mainly includes robot and welding equipment. The robot consists of the robot body and the control cabinet (hardware and software). welding equipment for arc welding consists of the welding power, wire feeder, welding torch etc, for intelligent welding robot it should also have a sensing system, such as laser or camera sensors etc. Genius Robotics: Leading Manufacturer of Welding Robot in China Genius Robotics Zhenkang professionally manufacture arc welding robot including MAG, MIG and TIG welding and laser welding robot, our advantages of welding robot as below. 1. Welding robot body: Hollow axles, high trajectory precision 0.3mm and high repeatability 0.03mm, advanced test instrument FARO from USA to ensure precision, low noise < 75dB, the welding torch and welding system is integrated in the robot, nice appearance. 2. Welding machine: the robot equipped with digital welding power supply, have feature of low spatter, can save labor hours of welding grinding. 3. Control system: Ultra-small size, super performance, high integrated control technology, achieve various precision indicators. We also supply welding positioner, rotary table and the 7th axis floor trailer to meet your welding requirements, we not only manufacture welding robot, but also provide your welding system integration solution. The Application Industry of Welding Robot Welding robot could be used in thin steel plates such as medical equipment, furniture, teaching equipment, guardrails, sheet metal, auto parts, two-wheelers and tricycles. Also for middle-thick steel plates, can be used in construction machinery, steel structure, petrochemical machinery and mining machinery etc. The advantages of Welding Robot As technology development, automatic welding robot began to be used for production, its technology has become increasingly mature. It has mainly the following advantages: 1. Improve production efficiency, firstly, the speed of welding robot is faster than manual welding, besides, welding robot can work 24hours continuously. 2. Improve the welding quality, the welding quality of robot is better than manual welding, the welding quality is more stable. 3. Reduce the cost of enterprise.

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   Mimaki TS500-1800 Gen5 printhead Assy Type-D - M014140This printhead is suitable for Mimaki TS500-1800 & TX500-1800 series printers.Printer Compatibility:  Mimaki TS500-1800 / TX500-1800B / TX500-1800DSPart No.: M014140Remarks: Original Specifications: Model PRH-MIM-006 Head materials  SST, Nickel alloy, Epoxy Adhesive Number of nozzles  Four 320 nozzles Nozzle spacing  0.1693 mm Nozzle density  up to 600 npi Nozzle plate surface  Coated SST Piezo type  D33 Stacked PZT Native drop volume  7 pl Drop volume range  7 - 35 pl Drop velocity  7 m/s Jetting frequency  Up to 60 kHZ Temperature control  Integrated Heater and Thermistor Operator temperature range  Up to 80° C Life  100 billion actuations per nozzle Dimensions  89 x 25 x 69 mm (not include cables)

Sorting equipment.

“SA International” - Shanghai Asia International Electrical & Mechanical Co., LTDispart of theSIBC Group, which has been providing equipment and technology selection services in various fields since 2017.   -   Construction.- Road construction.- Metallurgy.- Mining.- Chemical industry.- Production lines for various purposes.   We are trusted by clients in Europe, USA, Canada, Malaysia, India, South Korea, Russia, Thailand. The company " SA International " has an official representative office on the territory of the Russian Federation, in the city of Krasnodar to simplify cooperation, document circulation and customs clearance for our clients. Cooperating with our company, you can be confident not only in the quality of the supplied equipment, but also in the after-sales service.    We provide:   - Machinery and equipment for the construction industry, such as:Asphalt concrete plants / plants (ABZ), concrete mixing plants / plants (BRU / RBU), self-propelled concrete mixers with self-loading function, concrete pumps, lines for the production of tiles and blocks, etc.   - Equipment for mining: crushers, screens, screens, conveyor belts, pumps, etc.   - Alligator scissors and metal presses.   - Cargo and wheeled vehicles: loaders, excavators, bulldozers.   - Storage equipment.   - DES and electric motors.   - Chemical reagents and components.   Also, "SA International" is a manufacturer of conveyor belts.   Over the years of working with factories in China, we have earned a reputation as a reliable partner and a center of excellence for quality assessment among our customers. Our managers will conduct a full market assessment, advise you on all emerging issues, provide complete information as soon as possible, and engineers will monitor the entire production process to minimize the percentage of defects and will train your staff.   An additional advantage of working with us will be that the managers of "SA International" know all the logistics processes, offer competitive prices and the shortest delivery times.

We also offer 90 days guarantee on all of our products. If you are not 100% satisfied with the performance of our products, you may return your purchase to us within 90 days from the date of purchase for a replacement, exchange, or a refund.

4N5614 Caterpillar ROCKER ARM

305221800 Cummins RETAINER,INJECTOR SPRING

IN120D - Burgmann BT-RN3 NU (DIN24960)  analogue of Burgmann BT-RN3 NU (DIN24960) IN120D - Burgmann BT-RN3 NU (DIN24960)  analogue Burgmann BT-RN3 NU (DIN24960)

mechanical seal type IN16 analogue of John crane 16, burgmann BT-PNT, Flowserve Pac-seal 16, sealol 16 mechanical seal type IN16 analogue of John crane 16, burgmann BT-PNT, Flowserve Pac-seal 16, sealol 16 mechanical seal type IN16 analogue of John crane 16, burgmann BT-PNT, Flowserve Pac-seal 16, sealol 16

mechanical seal type IN301 analogue of burgmann BT-AR, john crane pr / dr, vulcan 18, sterling bt, flowserve pac-seal 118, aesseal b01, roten 37b / l5, latty t750

mechanical seal type IN109 analogue Burgmann type MG1 MG12 MG13, Roten L3, L3K, L3N, Vuckan 19, 192, 193 Anga A1, Aesseal B02, B012, BP02, Flowserve Pac-Seal 190, 192, 193

mechanical seal type IN1155, type IN1155C, analogue of burgmann BT-FN, Burgmann BT-FNU Flowserve Pac-Seal 43 / 43D, Vulcan Type 13 / 13.DIN, AESSEAL T04 / T04D, ROTEN 3 TYPE, LATTY T901 / T901D , Sterling SR3 / SU3

spare parts for pump Mini Gnome 7-7 spare parts for pump Mini Gnome 7-7 spare parts for pump Gnome 10-6 spare parts for the pump Gnome 10-6D spare parts for pump 1 Gnom 10-6D spare parts for pump Gnome 6-10 spare parts for the pump Gnome 6-10D spare parts for pump 1 Gnome 6-10D spare parts for the pump Gnome 10-10D spare parts for pump 1 Gnom 10-10D spare parts for pump GNOM 10-10 spare parts for pump GNOM 16-16 spare parts for pump GNOM 25-20 spare parts for pump GNOM 40-25 spare parts for pump GNOM 50-25 spare parts for pump GNOM 53-10 spare parts for pump GNOM 100-25 spare parts for pump GNOM 140-10

RUICHI anti-vandal waterproof metal keyboards, silver color, stainless steel are on sale. We work from stock and on order.

Housing for electronic equipment is used in electronics to create various devices. They can be manufactured in a sealed or non-sealed design. Our assortment includes a large selection of brand enclosures We work from stock and on order. WHOLESALE Direct deliveries from Southeast Asia.

A&S Hydraulic Co.,Ltd is a global supplier of Rexroth Valves: Rexroth Valve 4WE6,4WE10,4WRE,4WRP10 Rexroth Valve 4WRPEH,4WS2EM,DBEM,3DREP,4WREE Rexroth Valve M-3SEW,DBETE,SED Rexroth Valve Z2FS,Z2S,2FRM Rexroth Valve Z4S,ZDB,ZDR Rexroth Valve DBDS,DBW,DB,2FRM,DR10

A&S Hydraulic Co.,Ltd is a global supplier of Atos Solenoid Valves: Atos Valve DHA,DHI,DHU,DHE Atos Valve DPZO,DHO,DHZO,DHQ,DKE,DKI Atos Valve DKZOR,DHRZO,DLOH,DLHZO Atos Valve DLKZOR,MZA Atos Valve HR, KR, JPR, HQ, KQ Atos Valve JPQ, HG, KG, JPG, HM, KM Atos Valve LIQZO, QVHZO

We specialize in exporting brand new Engraving Machines, CNC machine, milling machine and laser machine to any country of the world. We supply best of quality Engraving Machines, CNC machine, milling machine and laser machine including major models from best brand makers. Currently we offer best products and brands from: roland, SISMA and many mores! Please visit our site or contact us for check our product available. World Wide Shipment Service Available!

Special equipment from Japan.

The UZ 18 Hardworker machine is one of the most powerful bevelling machines with the automatic feed in the market. It is suitable not only for workshops, but also for assembly operations. It has a continuous working angle adjustment system. Thanks to the special design of the drive system, the UZ 18 Hardworker is also suitable for tougher materials. The machine is equipped with the automatic feed. Working with UZ 18 Hardworker is therefore very comfortable. • For steel (strength up to 700 MPa / 101 526 PSI), brass, copper and aluminium. • For bevelling material with minimum dimensions - width 70 mm / 2.75 in, length 150 mm / 5.9 in, thickness 6 mm / 0.23 in. • Thickness of bevelled material 6 to 40 mm / 0.23 to 1.57 in. • The bevel angle is easily adjustable from 15° to 50° - smoothly, without the need to replace any part. • The equipment is capable of performing double-sided bevelling (X, K) without the need for material handling. • Easy connecting to the 3D Manipulator for easier operation and handling. • The machine is equipped with an automatic feed. • The possibility of stationary and mobile use. • The machine works on large workpieces without support. • Smaller parts of the material are inserted directly into the machine. • An advantageous price when purchasing UZ 18 Hardworker together with the 3D Manipulator. Technical data: Max. bevel width: 18 mm / 0.71 in (600 MPa / 87 022 PSI) Continuously adjustable angle: 15° - 50° Thickness of bevel. material: 6 to 40 mm / 0.23 to 1.57 in Engine: 750 W Feed: 1,9 m/min. / 6.23 ft/min. Weight: 110 kg / 242.5 lb Dimensions (WxHxD): 438 x 719 x 644 mm 17.24 x 28.3 x 25.35 in Included in price: Bevelling system UZ 18 Hardworker Tools for operators Instruction manual

New: A brand-new, unused, unopened, undamaged item in its original packaging   Brand: SurRonshop Part Type: Spinning Wheel

We are offering specialized in Conduit Pipe fitting accessories, PPR fittings, and Precision Turned components fitting accessories, Brass Fasteners like Nuts, Bolts, Screws, Washers, Inserts, Brass Anchors, Brass Spray Parts, Brass Pins and all type of precision Brass turned or punched components as per customers specifications and drawings. We ensure that every component and fasteners produced at our plant matches in minutest details, those made by technologies anywhere in the world. Our aim is to deliver products with “Zero Defects” with very optimum prices. We appreciate you if you can send us all your requirements for the above-mentioned products.

Shandong Kat drilling tools Co., Ltd. is a professional enterprise engaged in rock drilling tools, mining tools and rotary drilling tools. We are willing to create a better future with high quality and low price products, advanced production technology, perfect after-sales service and honest business philosophy! The rock drilling tools, down the hole drilling tools and mining machine tools produced by the company are widely used in the fields of tunneling, drilling, mining, railway, highway, hydropower and other basic energy construction.

Description The size of the decorative panel: 200 * 111 mm. In the package: 29 pcs. Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 180 * 70 mm.In the package: 28 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 205 * 118 mm. In the package: 22 pcs. Total area in the package: 0.35 sq. _________________________________________________________________________________________________________ Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using KLEIBERIT 566 PUR supracraft pur-glue sealant. -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 185 * 160 mm.In the package: 16 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 140 * 120 mm.In the package: 42 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   With a stationary machine SUMAB R-1500 you can produce the following products: Empty blocks Curbstones Paving stone Tiled stone Capacity (per shift): Paving stone (10x20x6 cm) – 2000-2600 m2 Hollow block (20x20x40 cm) – 23000 pieces Curbstone – 2800-4000 pieces depending on the size of the curbstones, without or with face mix. Pallet size max: 1400x1100 mm. Useful area max: 1300x1050 mm. If you choose the fully automatic block machine, you will receive an Internet modem as a gift!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training The plant is designed on a container frame.4 aggregate storages,Planetary mixer 1800/1200 liters.Additive pump, high pressure compressor.Computer Siemens (100 concrete sorts).Concrete plants SUMAB are a guarantee of quality, durability and reliability. Batching plant is produced by Scandinavian technology, using components from the leading European manufacturers! Scandinavian quality at the best price!If you need more information, you can visit our website, or send a request. We will necessarily find the best solution for you!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training     Mobile concrete plant SUMAB MINI designed on long legs. Does not require the installation of a conveyor belt! This allows you to save on purchasing a conveyor belt and place the plant on a small site or indoors, without losing productivity & quality.  Main technical data: - 2 aggregate storages; - planetary mixer 560/375 liters; - water tank 200 liters; - automatic control of a plant: computer (20 concrete receipts).

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training 4 aggregate storages 2,4 m3 eachPAN MIXER 2250/1450 LitresComputer Siemens (100 concrete sorts).3 weighing cells under the mixer allows +-1% toleranceChemical additive pump for 2 types of additivesWater tank 200l with water counterEquipped with special hooks for transportationReady to produce concrete within 3 hours after delivered to the site!Easy to transport from site to site!Perfect match for medium/big scale projects!Scandinavian quality plant is better than 2 cheap or used plants!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   4 total storage tanks with 3.8 м3 each, with the boards being increased to 5 m3   Pan mixer 1800 \ 1200 liters, coated with 12 mm layer of special steel. Automatically opens the damper supply for precast concrete. 5 mixing arms.   The special arrangement of the arms in the pan mixer means that all parts of the mixer can be covered during the batch, which means that a high-quality concrete is achieved.   Mobile concrete plant with comfortable cabin and automatic control of the system. The modern Siemens computer system enables the production of 100 recipes and types of concrete. You can print any mix of finished batches in kilograms and percentages to prevent cement or aggregate theft while making a concrete mix. Advantages of the SUMAB K-60 mobile concrete plant • Concrete production is already possible within 3 hours after delivery of a system to the work area! • Mobile concrete plants can easily be moved from one object to another. • You do not need a foundation or agreements to install a concrete plant! • The mobile concrete plant can be installed on any flat surface with minimal dimensions of 15 to 20 meters. • Siemens computer enables one person to control the system.   Mobile concrete plant suits you if: • You are working with a government project. • The work is carried out over a long distance and it is necessary to change the location of the plant. • You take part in tenders in various regions. • Increased demands on the environment. • You have a temporary location for the system or a temporary project. • You feel very comfortable in your region. Projects elsewhere are planned. • You need a quick repayment.

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   SUMAB MINI is suitable whether you produce concrete for your own project or concrete element production.Easy put it inside the building and build your concrete element factory.Many companies intend to develop new products or develop process of production from manual to automatic.There is why they need the mini plant!Designed on a container frame.2 aggregate storages,pan-mixer 500/300 liters.Water tank 200 liters.Automatic control of a plant: computer (20 concrete recipes).Concrete plant made by SUMAB is a definition of quality, durability and reliability. Batching plant is produced by Scandinavian technology, using components from leading European manufacturers! Scandinavian quality at the best price! If you need more information, you can visit our website, or send a request. We'll necessarily find the best solution for you!  

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training The mobile concrete batching plant Sumab K-40 is intended to produce high-quality concrete and concrete mixes. Exact performance of plant capacity depends on type and mark of produced concrete and on used aggregates, cement and quantity of chemical additives. Batching plant is mounted on a container frame and can be transported on a 40 foot open top container.4 aggregate storages, mixer 1500/1000 liters. Additive pump, high pressure compressor. Computer Siemens (100 concrete sorts). Batching plant equipped with comfortable cabin and system of automatic control of the plant. Modern computer system Siemens enables to produce 100 recipes and sorts of concrete. You can print each mixture of ready batch in kilograms and percent, that prevents the theft of cement or aggregates in the preparation of a concrete mix.Optionally can be delivered: cement silo, cement screw, belt conveyer of supply ready-mixed concrete from the mixer. If you need more information, you can visit our website, or send a request. We will necessarily find the best solution for you! We are ready to invite you to see our existing concrete plants, which were manufactured in 1980-s. They are still in the ranks!Concrete plants SUMAB are a guarantee of quality, durability and reliability. Batching plant is produced on Scandinavian technology, using components from leading European manufacturers! Scandinavian quality at the best price!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   Fully automatic batching plant. The plant is designed on a container frame. 4 aggregate storages, turbine type mixer 1200/800 liters. Water tank 250 l. Automatic control of a plant: Computer Siemens (100 concrete recipes). Control room container 2,5 x 2,5 x 2,95m. Swedish quality. Good price. Mobile concrete plant is equipped with a comfortable cabin and system of automatic control of the plant. Modern computer system Siemens enables to produce 100 recipes and sorts of concrete. You can print each mixture of ready batch in kilograms and percent, that prevents the theft of cement or aggregates in the preparation of a concrete mix.

Cutting machine: Rated voltage (V): 220 Rated frequency (Hz): 50 Cutting disc diameter (mm): 110 Max. cutting depth (mm): 30 Rated power (w): 1200 Rated speed (r / min): 13000 Net (kg): 3.0