Construction Materials in bulk on Qoovee

colour fast ready to use abrasion resistance Hard grain spreader for concrete and screed floors. Factory pre-mixed, ready-to-use dry material consists of special, natural hard materials, Portland cement and dispersing agents. The inorganic pigments are resistant to cement, alkalis, light and guarantee long-term durability of the color of the floor. Dispersing agents absorb water from the concrete or screed mixture and thus form an extremely thick and compact painted surface. Low cost per m², high abrasion resistance, high impact resistance, high surface density, low oil and grease absorption, easier to clean. Consumption min. 3 kg/m² - depending on floor load

binds dust surface hardening high abrasion resistance Solvent-free, dust-binding, mineral, surface hardening impregnation for mineral substrates. Causes silicification of the surface and consequently increases the mechanical abrasion resistance. In addition, the impregnated, water- and dirt-repellent surface is achieved due to the high penetrating properties. Indoors and outdoors on horizontal and vertical mineral components. Consumption about 0.3 kg/m² depending on absorbency

plastic hardened without chlorides quick setting Powdery, hardened, chloride free, fast curing, hydraulic setting of flash setting solution. Indoors and outdoors, as well as in permanently wet areas, for fast installation for the transfer of dowels, door frames, handrails and washbasin consoles, as well as for improving and filling holes, cavities and cracks in concrete elements. Consumption of 1 kg gives about 0.7 liters of fresh solution

Single-component plastic-hardened quick setting one-component, cementitious, plastic reinforcement protection. The Repol BS7 reinforcing protection is very easy to process and does not require the application of quartz sand. Thanks to the mineral base components and the quick set recipe, excellent adhesion on steel and concrete is achieved. Consumption about 0.2 kg / sq.m of reinforcement in two stages of work. ColorGray

Single-component plastic-hardened quick setting one-component, cementitious, plastic reinforcement protection. The Repol BS7 reinforcing protection is very easy to process and does not require the application of quartz sand. Thanks to the mineral base components and the quick set recipe, excellent adhesion on steel and concrete is achieved. Consumption about 0.2 kg / sq.m of reinforcement in two stages of work. ColorGray

Frost/anti-freeze wear resistant agent can be combined with gray concrete aggregate Mineral, powdered, hardened, weather resistant, hydraulically settable white aggregates for concrete repair in accordance with EN 1504-3 class R2. Indoors and outdoors for extensive filling of concrete surfaces, improving unevenness, gravel pockets, broken edges, wear to damaged areas, etc. For exposed concrete, different gray shades can be achieved and thus adapted to different concrete substrates by mixing in BS 05 Gray concrete filler. Consumption approx. 1.5 kg/m² mm

Frost/anti-freeze wear resistant agent can be combined with white concrete aggregate Mineral, powdered, hardened, weather resistant, fast setting, hydraulically settable gray aggregate for concrete repair, according to EN 1504-3 class R2. Indoors and outdoors for extensive filling of concrete surfaces, etc. For exposed concrete, by mixing in concrete filler BS 10 White various gray colors can be achieved and thus adapted to different concrete substrates. Consumption approx. 1.5 kg/m² per mm layer thickness

frost resistant quick set up indoors and outdoors Powdery, hardened, weather resistant, fast setting, hydraulically set filler. Indoors and outdoors for optical correction of defective, mottled concrete surfaces full of pores to achieve an even, smooth surface. Layer thickness max. 2 mm. Coverage approx. 1.4 kg/m² per mm layer thickness

Chloride-free liquid can be processed down to -9 °C Chloride-free, liquid frost-resistant agent for concrete and mortar. The addition increases the heat of hydration of the concrete or mortar and therefore the required minimum compressive strength of 5 N/mm² for the freeze resistance achieved previously. Indoors and outdoors for reinforced concrete and prestressed concrete as well as mortar. Allows concreting and masonry work at -9 °C when standardized protective measures are observed. Consumption about 1% by weight of cement (about 3 - 4 kg/m³ of concrete)

chloride-free plasticizing liquid Chloride-free, liquid concrete and mortar additives without the introduction of air pockets. Increases displacement and improves processability while reducing W/B and increasing flexural and compressive strength. Reduces the tendency to split and bleed. Indoors and outdoors. Consumption about 3 - 4 kg/m³ concrete/mortar

Cement binding frost resistant can be filled in gradients up to 3% stable and can be set to flow Powdered, plastic hardened, low stress, self leveling, hydraulically set leveling compound. For indoors and outdoors, especially for evening extreme unevenness such as hollow slabs and slabs, as well as large area level compensation up to 3% slope. Consumption approx. 1.6 kg/m² per layer thickness mm

Very fast curing Good bonding No waiting time for subsequent work Powdery, very fast curing, hydraulically setting bonding agent. Only indoors for fixing electrical installations, anchoring dowels, filling cracks. Consumption depending on use and application

The company OASIS group, Chelyabinsk, manufactures and sells components for stretch ceilings: baguette, platform, suspensions, cable, plug, harpoon, dowels, self-tapping screws, thermal rings, perforated tape and all related products. Also performs installation at construction sites.

Dear Sirs We are Kardem foreign trade company based in Turkey. Our range of products; Reinforcing Deformed Bars Equal Angles Flat Bars Square Bars Round Bars UPN IPN IPE HEA HEB Cold Drawn Round Bars Ribbed Flat Bars / Steel Strips Hammered Square Bars Hammered Flat Bars Hexagonal Bars For further information and quotations for the products above please feel free to contact us. We would love to work with you and grow together. Have a great day

Price (FCA): 20$/piece.Sizes: 80*60cm, 50*70cm.Payment terms: USdollars, EURO.The product is certified. The offered products are fully consistent with high international quality. Export - wholesale import of quality goods from Turkmenistan from all over the world Delivery with all modes of transport (INCOTERMS 2010 EXW, FCA, FOB, CIP, CIF.) Customs clearance of goods free of charge: 100%

Wholesale high quality power tools Drills screwdrivers perforators, milling cutters and TP Generators from 1 kW to 400 kW and above

Grade A grade B grade extra

E110720 TRANSPARENT FOOD GRADE PLASTIC FOOD MEAT TRAYS Specification:267*170*20（mm） Material:PP Suggested weight:32g VSP TRAYS are used in conjunction with a skin lidding film where the film follows the contours of the product via vacuuming to create a 3D presentation. A major advantage of this format compared to MAP is that it provides for an extended shelf life (particularly for red meat) over and above MAP.

Natural travertine marble and limestone

Microsphere: Gray, 0-500 microns humidity 1% price from 1 to 5 tons, 71,000 rubles Gray, 0-500 microns humidity 1% price from 5 to 10 tons, 70,000 rubles Gray, 0-500 microns humidity 1% price from 10 to 20 tons, from 65,000 rubles Gray, 0-500 microns humidity 1% price from 20 tons, from 64,000 rubles The products are packed in BIG BEG (MKR), 500 kg each. TU 5712-089-15005227-2020

- siloxane-reinforced permeable good finish Siloxane-treated façade paint for high quality façade coatings in a wide range of colors. For lightfast, non-yellowing and alkali-resistant facade coatings with high adhesion strength of newly unpainted finishing plaster, as well as for repairing coatings with good old adhesive paints, both indoors and outdoors. Consumable layer with fine gypsum grain about 150 - 250 g / m², coarse gypsum grain about 250 - 350 g / m² Color Base white, colorless. Can be painted in full, base and shaded colors using the Murexin mixing system.

- Fast drying isolates traces of nicotine, lignin and soot. Isolates coffee and watermarks. High coverage. Does not contain aromatic substances, especially fast drying, very good insulating and very opaque solvent based wall paint. For wear-resistant, matt and preformed ceiling and wall coverings. For isolation from nicotine and water stains, such as hotels and restaurants, for fire and water damage, for factories, etc. Two coats are required. Thinning with Reno is thinner. Consumption approx. 250 - 300 g / m² per layer Color White

- isolates traces of nicotine, lignin and soot separates dry coffee and watermarks solvent-free odorless and splash-free excellent permeability Water-based wear resistant insulating paint for nicotine, coffee and soot stains, as well as lignin and water stains, as in indoors and outdoors. For insulating coatings on walls and ceilings on mineral substrates, as well as wood, non-ferrous metals and rigid PVC, both indoors and outdoors. Wet abrasion: Grade 1. Tip: Can be used as an adhesive and top coat on a variety of problem substrates. Consumption approx. 150 - 200 ml / m² per layer Color White; can be painted in full tones, base and shaded colors and in color shade group 1 through the Murexin MIX system.

- Low emission and solvent free abrasion resistance abrasion resistant matt Matt, abrasion resistant, solvent free latex color with high coverage and excellent processing properties. Combines the durability of latex paint with the matt surface of conventional dispersion paints. Tested in accordance with EN 13300: wet abrasion: class 1. For resilient, easily washable paints on interior walls and ceilings in new buildings and during interior refurbishment. Consumption approx. 150 - 200 ml / m² per coat Color Base white, colorless. Can be painted in full, base and shaded colors using the Murexin mixing system.

- ELF - low emission and solvent free, contains kaolin Wet abrasion class 2 Scrub resistant, kaolin containing interior emulsion paint, in the best decorating quality, with a high degree of coverage. Awarded with the Austrian Eco-Label. Wet abrasion: class 2; Opacity: Class 1. Consumption approx. 150 - 200 ml / m² per coat Color Base white, colorless. Can be painted in full, base and shaded colors using the Murexin mixing system.

- ready-to-use high filling power easy handling White ready-to-use hand-held filler for versatile indoor use. High filling capacity and pliability ensure smooth and precise processing of light sandy finishing aggregates. For standard filling work on indoor walls and ceilings, but also best suited for grouting works as well as for butt and surface filling. Layer thickness: up to 5 mm at each stage of work. Consumption approx. 1.5 kg / m² per layer mm Color white

- good primer effect high yield water dilutable Solvent free, water dilutable primer concentrate based on high quality acrylate. Good soil effect, high yield, environmental friendliness. For strengthening sandy and highly absorbent substrates, obtaining a uniformly absorbent substrate and promoting adhesion of subsequent coatings both indoors and outdoors. Dilution up to 1: 4 with distilled water, depending on the nature of the surface. Consumption about 150 - 200 ml / m² per layer Colorless

- Etkili Performans için Yüksek Kapatıcılı Astar Alçıpan levhalar için idealdir Beyaz, solventsiz, dispersiyon bazlı astar. Yüksek kapatıcılık için yüksek kaliteli titanyum dioksit. İç ve dış duvarlar ve tavanlar için. Dispersiyon ve silikon reçineli baz üzerine müteakip kaplama için. Çok emici veya kumlu yüzeylerde kullanmayın. Kuru astar için temel kat olarak idealdir. Ayrıca üst kat olarak da kullanılabilir. Tüketim yaklaşık 100 - 150 ml / m² Renk beyaz

- alkali-resistant Alkaline-resistant fiberglass for reinforcement (arms) of fillers. Component for the production of reinforced walls (reinforcement layers) for thermal insulation composite systems and in-wall systems.

- PIPE BOX L

- thermal insulation versatile practical Thermal insulation, waterproof, fire-resistant, frost-resistant, steam-dissipating, non-extinguishing carrier plate with high compressive strength made of extruded rigid polystyrene foam with textile glass mesh, reinforced with a special mortar coating. The Murexin Uni group is free of chlorofluorocarbons (CFCs), HCFCs or HFCs, and HBCD. For finishing facades and pedestals, as well as for special structures.

- thermal insulation versatile practical Thermal insulation, waterproof, fire-resistant, frost-resistant, steam-dissipating, non-extinguishing carrier plate with high compressive strength made of extruded rigid polystyrene foam with textile glass mesh, reinforced with a special mortar coating. The Murexin Uni group is free of chlorofluorocarbons (CFCs), HCFCs or HFCs, and HBCD. For finishing facades and pedestals, as well as for special structures.

- thermal insulation versatile practical Thermal insulation, waterproof, fire-resistant, frost-resistant, steam-dissipating, non-extinguishing carrier plate with high compressive strength made of extruded rigid polystyrene foam with textile glass mesh, reinforced with a special mortar coating. The Murexin Uni group is free of chlorofluorocarbons (CFCs), HCFCs or HFCs, and HBCD. For finishing facades and pedestals, as well as for special structures.

- thermal insulation versatile practical Thermal insulation, waterproof, fire-resistant, frost-resistant, steam-dissipating, non-extinguishing carrier plate with high compressive strength made of extruded rigid polystyrene foam with textile glass mesh, reinforced with a special mortar coating. The Murexin Uni group is free of chlorofluorocarbons (CFCs), HCFCs or HFCs, and HBCD. For finishing facades and pedestals, as well as for special structures.

- thermal insulation versatile practical Thermal insulation, waterproof, fire-resistant, frost-resistant, steam-dissipating, non-extinguishing carrier plate with high compressive strength made of extruded rigid polystyrene foam with textile glass mesh, reinforced with a special mortar coating. The Murexin Uni group is free of chlorofluorocarbons (CFCs), HCFCs or HFCs, and HBCD. For finishing facades and pedestals, as well as for special structures.

- thermal insulation versatile practical Thermal insulation, waterproof, fire-resistant, frost-resistant, steam-dissipating, non-extinguishing carrier plate with high compressive strength made of extruded rigid polystyrene foam with textile glass mesh, reinforced with a special mortar coating. The Murexin Uni group is free of chlorofluorocarbons (CFCs), HCFCs or HFCs, and HBCD. For finishing facades and pedestals, as well as for special structures.

for smoothing various materials ideal surface appearance Long-term protection Murexin Universal Smoother UG 1 is used for smoothing all Murexin silicone and polyurethane seals as well as Murexin natural stone silicones. Indoors and outdoors. Murexin Universal Smoother has the property of modifying the surface tension of the sealants used in such a way that pasty masses can be deformed without problems. This is not possible with water alone. Not suitable for dispersion based acrylic sealants. A 1.0 liter consumable bottle is sufficient for 60 m2 (determined in a standard climate, 20 ° C / 60% RH)

for smoothing various materials ideal surface appearance Long-term protection Murexin Universal Smoother UG 1 is used for smoothing all Murexin silicone and polyurethane seals as well as Murexin natural stone silicones. Indoors and outdoors. Murexin Universal Smoother has the property of modifying the surface tension of the sealants used in such a way that pasty masses can be deformed without problems. This is not possible with water alone. Not suitable for dispersion based acrylic sealants. A 1.0 liter consumable bottle is sufficient for 60 m2 (determined in a standard climate, 20 ° C / 60% RH)

admissible total deformation up to 15% coated with RAL UZ 123 (Blue Angel) free of solvents, phthalates, glycols, APEO-, isocyanate- and silokones free of organohalogen and organotin compounds Ready-to-use one-component acrylate-based sealant with improved elasticity ... Water soluble, lightfast, low odor, solvent and phthalate free. For filling joints and cracks inside and outside of premises on plaster, concrete, masonry, drywall, wood and chipboard, stone, absorbent ceramics, aluminum and corrosion-resistant metals. It is also especially suitable for joining the sealing joints of wooden and metal window frames, for shutters, internal and external window banks, aerated concrete, concrete and wooden elements, partitions. Not suitable for permanently wet loads. Consumption approx. 12.5 m2 for 5 mm x 5 mm connection Color white

neutral cross-references UV resistance suitable for use in hydrometry One-component, UV resistant, waterproof, up to 20% permanently flexible sealant based on neutral silicone. Resistant to bacteria and fungi. Unlike conventional silicone sealants, contact with Murexin Nature Stone Silicone SIL 50 will not result in edge contamination (discoloration). Also suitable for use in wet areas. Consumption of 1 cartridge is sufficient for 10 m2 with a connection width of 5 mm Colors gray, white, transparent, bahama, anthracite