Construction Materials in bulk on Qoovee

longer service life and functionality of the joint high load-bearing resistant to fungus and bacteria suitable for natural stone resistant to ultraviolet radiation and weathering One-component, solvent and silicone, odor-neutral, UV and weather-resistant, waterproof, up to 20% permanently flexible sealing compound based on MS polymer. Resistant to fungi and bacteria. Suitable indoors and outdoors for closing expansion joints, wall and floor niches in ceramic tiles, as well as joints between tiles and foreign materials such as bathtubs, door frames, etc .; it can also be used for natural stone. The special adhesive can be painted over and is suitable for adhesion. Consumption of 1 cartridge is sufficient for 10 m2 with a connection width of 5 mm

longer service life and functionality of the joint high load-bearing resistant to fungus and bacteria suitable for natural stone resistant to ultraviolet radiation and weathering One-component, solvent and silicone, odor-neutral, UV and weather-resistant, waterproof, up to 20% permanently flexible sealing compound based on MS polymer. Resistant to fungi and bacteria. Suitable indoors and outdoors for closing expansion joints, wall and floor niches in ceramic tiles, as well as joints between tiles and foreign materials such as bathtubs, door frames, etc .; it can also be used for natural stone. The special adhesive can be painted over and is suitable for adhesion. Consumption of 1 cartridge is sufficient for 10 m2 with a connection width of 5 mm

-smooth; smooth easy smoothing classified according to EN 15651 parts 1, 3 and 4 EC 1 Plus - very low emissions according to GEV Emicode XS 1 - best protection against microorganisms (fungi) One-component, solvent-free, resistant to UV, aging and weather resistant, water-resistant, color-stable, elastic sealant based on acidic cross-linking silicone with good chemical resistance. For indoor and outdoor use to close expansion joints, wall and floor joints in ceramic coverings, as well as to close joints between tiles and foreign materials. consumption of 1 cartridge is enough for about 10 running meters with a seam width of 5 mm. color 17 colors plus transparent, see Color Swatch Chart

flexible simple smoothing classified according to EN 15651 Parts 1, 3 and 4 EC1 Plus - very low emission according to GEV Emicode XS 1 - best protection against microorganisms (fungi) One component, solvent free, UV, aging and weatherproof, waterproof, colorfast, elastic, acid-crosslinking silicone based sealant with good chemical resistance. Suitable indoors and outdoors for closing expansion joints and wall and floor recesses in ceramic tiles, as well as for sealing joints between tiles and foreign materials. Consumption of 1 cartridge is sufficient for 10 sqm with 5 mm joint width Color 17 colors plus transparent, see color swatch table

Optimal processing properties! wide range of colors bacteriologically harmless very resilient food grade, waterproof, frost-resistant, solvent-free, bacteriostatic, temperature, aging and chemical resistant, 2-component epoxy grout. Grouting ceramic tiles, panels and mosaics in interior and exterior wall and floor coverings. Especially suitable for use with aggressive waters, vegetable or animal fats and chemicals, as well as in drinking water containers. FMY 90 epoxy grout is also suitable for adhesion and leveling. Consumption about 1 kg / m² depending on the connection format

- Optimal technological properties! wide range of colors bacteriologically harmless very resilient food grade, waterproof, frost-resistant, solvent-free, bacteriostatic, temperature, aging and chemical resistant, 2-component epoxy grout. Grouting ceramic tiles, panels and mosaics in interior and exterior wall and floor coverings. Especially suitable for use with aggressive waters, vegetable or animal fats and chemicals, as well as in drinking water containers. FMY 90 epoxy grout is also suitable for adhesion and leveling. Consumption about 1 kg / m² depending on the connection format

-thin surface especially for natural stone and porcelain stoneware The setting is practically independent of temperature you can walk in 2 hours for joints from 1 to 15 mm Powdery, food-safe, water and frost-resistant, colored, fine-grained, hydraulically settable solution with an ideal hygienic formula. The unique high-temperature recipe ensures quick and even tightening of tiles and joints. Inside and outside on wall and floor surfaces with joint widths from 1 to 15 mm. A high level of lateral fit is achieved through high quality plastic components. consumption 0.5 & ndash; 1.8 kg / m & sup2; color gray, manhattan, anthracite, basalt

wide range of applications frost resistant minimizes fading Powdery, food safe, water and antifreeze, hardened, hydraulically settable trough-based grout for grouting wide joints. Trass Grout FMT 15 provides additional safety against fading and discoloration. Internal and external use for grouting 4 - 15 mm joint width. For grouting natural stones, absorbent tiles and artificial stones. Consumption 0.6 - 2.0 kg / m², depending on tile format and joint width Color gray, medium brown, anthracite, beige, manhattan

- wide range of applications frost resistant minimizes fading Powdered, food safe, water and antifreeze, hardened, hydraulically settable trough-based grout for grouting wide joints. Trass Grout FMT 15 provides additional safety against fading and discoloration. Internal and external use for grouting 4 - 15 mm joint width. For grouting natural stones, absorbent tiles and artificial stones. Consumption 0.6 - 2.0 kg / m², depending on tile format and joint width Color gray, medium brown, anthracite, beige, manhattan

- for indoor and outdoor use for walls and floors high flexibility, abrasion resistance and pearl effect for natural stone, fine porcelain stoneware and much more for joints 1 to 6 mm wide (national specifications must be observed and observed) Powdered , food safe, water and frost resistant, super smooth, high strength and flexible pearl effect grout. Simple processing and further processing are possible without delay due to the simple application of filler in the joint and the same fast application, especially for non-absorbent material. In addition, the low water consumption of the highly abrasive grout reliably prevents staining. For grouting joints 1 to 6 mm wide for indoor and outdoor wall and floor surfaces. For water- and dirt-repellent grouting of ceramic tiles, boards, mosaics, as well as natural stone and fine porcelain stoneware. Suitable for underfloor heating systems in residential areas, as well as for wet rooms, terraces and balconies. Consumption 0.2 - 0.9 kg / m² (depending on tile format and joint width) Consumption calculator for Color gray, white, silver gray, Manhattan gray, cement gray, jasmine, bahama, silk gray, hazelnut, sand gray, camel , sanitary gray, walnut brown, bali, basalt, anthracite, black

- for indoor and outdoor use for walls and floors high flexibility, abrasion resistance and pearl effect for natural stone, fine porcelain stoneware and much more for joints 1 to 6 mm wide (national specifications must be observed and observed) Powdered , food safe, water and frost resistant, super smooth, high strength and flexible pearl effect grout. Simple processing and further processing are possible without delay due to the simple application of filler in the joint and the same fast application, especially for non-absorbent material. In addition, the low water consumption of the highly abrasive grout reliably prevents staining. For grouting joints 1 to 6 mm wide for indoor and outdoor wall and floor surfaces. For water- and dirt-repellent grouting of ceramic tiles, boards, mosaics, as well as natural stone and fine porcelain stoneware. Suitable for underfloor heating systems in residential areas, as well as for wet rooms, terraces and balconies. Consumption 0.2 - 0.9 kg / m² (depending on tile format and joint width) Consumption calculator Color gray, white, silver gray, Manhattan, cement gray, jasmine, bahama, silk gray, hazelnuts, sand gray, camel, sanitary gray, walnut brown, bali, basalt, anthracite, black

- for indoor and outdoor use for walls and floors high flexibility, abrasion resistance and pearl effect for natural stone, fine porcelain stoneware and much more for joints 1 to 6 mm wide (national specifications must be observed and observed) Powdered , food safe, water and frost resistant, super smooth, high strength and flexible pearl effect grout. Simple processing and further processing are possible without delay due to the simple application of filler in the joint and the same fast application, especially for non-absorbent material. In addition, the low water consumption of the highly abrasive grout reliably prevents staining. For grouting joints 1 to 6 mm wide for indoor and outdoor wall and floor surfaces. For water- and dirt-repellent grouting of ceramic tiles, boards, mosaics, as well as natural stone and fine porcelain stoneware. Suitable for underfloor heating systems in residential areas, as well as for wet rooms, terraces and balconies. Consumption 0.2 - 0.9 kg / m² (depending on tile format and joint width) Consumption calculator Color gray, white, silver gray, Manhattan, cement gray, jasmine, bahama, silk gray, hazelnuts, sand gray, camel, sanitary gray, walnut brown, bali, basalt, anthracite, black

-for indoor and outdoor use for walls and floors very flexible, abrasion resistant and pearlescent for natural stone, porcelain stoneware and more for joints 1 to 6 mm wide (national regulations must be observed) Powdery, food safe, water and frost resistant, very flexible, high strength and elastic pearlescent grout. Simple insertion into the joint and uniform fast tightening of the sealant, especially with a non-absorbent gasket material, allows quick and easy processing and immediate follow-up work. In addition, the low water absorption of the high strength joint mortar reliably prevents staining. For filling joints 1 to 6 mm wide on wall and floor surfaces, both indoors and outdoors. For water- and dirt-repellent grouting of ceramic tiles, slabs, mosaics, as well as natural stone and porcelain stoneware. Suitable for underfloor heating in residential areas, as well as for damp rooms, terraces and balconies.

- for indoor and outdoor use for walls and floors high flexibility, abrasion resistance and pearl effect for natural stone, fine porcelain stoneware and much more for joints 1 to 6 mm wide (national specifications must be observed and observed) Powdered , food safe, water and frost resistant, super smooth, high strength and flexible pearl effect grout. Simple processing and further processing are possible without delay due to the simple application of filler in the joint and the same fast application, especially for non-absorbent material. In addition, the low water consumption of the highly abrasive grout reliably prevents staining. For grouting joints 1 to 6 mm wide for indoor and outdoor wall and floor surfaces. For water- and dirt-repellent grouting of ceramic tiles, boards, mosaics, as well as natural stone and fine porcelain stoneware. Suitable for underfloor heating systems in residential areas, as well as for wet rooms, terraces and balconies. Consumption 0.2 - 0.9 kg / m² (depending on tile format and joint width) Consumption calculator Color gray, white, silver gray, Manhattan, cement gray, jasmine, bahama, silk gray, hazelnuts, sand gray, camel, sanitary gray, walnut brown, bali, basalt, anthracite, black

- hardening for grouting hemisch belastbar flexible wasserabweisend Plastic dispersion to increase the elasticity, water-repellent and chemical resistance of Murexin grout. Hardener for Murexin adhesives with increased static or thermal loads for better stress dissipation or absorption, for example, when laying on warm floors, terraces, balconies, facades, etc., as well as for use in swimming pools, thermal baths, bathtubs with sea ​​water and brine, large kitchens, car washes, terraces, as well as industrial and commercial premises. Consumption depending on the water consumption of the respective grout

- Reduces excess teeth during placement saves time no additional tools required easy application Plastic installation aid consisting of a tension cover and a threaded protrusion for placing material up to 12 mm thick (tension coating aid BIS 12, black) or 20 mm (stretch coating aid BIS 20, gray) - The threaded insert (FB 17 1.7 mm wide or FB 10 1.0 mm wide) can be used regardless of height. For delicate ceramics or natural stone, it is recommended to use a transparent protective underlay SU 01 under a suitable stretch coating.

- Reduces excess teeth during placement saves time no additional tools required easy application Plastic installation aid consisting of a tension cover and a threaded protrusion for placing material up to 12 mm thick (tension coating aid BIS 12, black) or 20 mm (stretch coating aid BIS 20, gray) - The threaded insert (FB 17 1.7 mm wide or FB 10 1.0 mm wide) can be used regardless of height. For delicate ceramics or natural stone, it is recommended to use a transparent protective underlay SU 01 under a suitable stretch coating.

- Reduces excess teeth during placement saves time no additional tools required easy application Plastic installation aid consisting of a tension cover and a threaded protrusion for placing material up to 12 mm thick (tension coating aid BIS 12, black) or 20 mm (stretch coating aid BIS 20, gray) - The threaded insert (FB 17 1.7 mm wide or FB 10 1.0 mm wide) can be used regardless of height. For delicate ceramics or natural stone, it is recommended to use a transparent protective underlay SU 01 under a suitable stretch coating.

- Reduces excess teeth during placement saves time no additional tools required easy application Plastic installation aid consisting of a tension cover and a threaded protrusion for placing material up to 12 mm thick (tension coating aid BIS 12, black) or 20 mm (stretch coating aid BIS 20, gray) - The threaded insert (FB 17 1.7 mm wide or FB 10 1.0 mm wide) can be used regardless of height. For delicate ceramics or natural stone, it is recommended to use a transparent protective underlay SU 01 under a suitable stretch coating.

combination bonding with various materials permanently elastic with extremely high adhesive strength very good adhesion without primer extremely high initial adhesion High quality elastic one-component adhesive based on the latest developments in MSP technology. The product is free from water, solvent, silicone, isocyanate and halogen, recoatable and UV and weather resistant. In addition, it is permanently elastic and prevents the transfer of unfavorable forces to the substrate. A universally applicable durable adhesive and sealant for indoor and outdoor use. Color white

seal + adhesion with one product very low emissions - EC1-PLUS waterproof and open to vapor diffusion decoupling for problem substrates New type of hydraulic installation, waterproof but still open to vapor diffusion, cementitious, flexible, one-component sealable and adhesive solution. Indoor and outdoor spaces for creating seamless and seamless seals in wall and floor coverings directly under ceramic tiles and boards (according to EN 14891 and ÖNORM B 3407 W1 - W6), as well as for bonding ceramic floor coverings for high thermal or mechanical stress. Consumption as a seal: about 1.5 kg / m² per mm as an adhesive: about 3 kg / m² depending on the tile format

high flexibility (S2) high stability with wall-mounted tension reduction even for problem substrates suitable for all tile types and sizes One-component, powdery, high-temperature, frost-free, hydraulically set, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine ceramics, natural stones that are not sensitive to moisture. Particularly suitable for the installation of highly demanding ceramic tiles. Consumption depending on the teeth: approx. 1.6 kg / m² with 6 mm teeth, approx. 2.2 kg / m² with 8 mm teeth, approx. 2.9 kg / m² with 10 mm notched teeth Color white

near temperature independent (from + 2 ° C) bonding of crystalline water fast hardening and high flexibility early adhesion strength White, almost temperature independent, powdery, crystalline water-binding, water- and frost-resistant, high-temperature, hydraulically set flexible adhesive solution for laying up to 20 mm thick adhesive layer. No show for lightweight materials. For laying ceramic wall and floor tiles indoors and outdoors, thin porcelain stoneware, for increased thermal or static loads in a layer up to an adhesive thickness of 4 to 20 mm. Consumption with teeth: approx. 1.8 kg / m² with teeth 6 mm, approx. 2.5 kg / m² with teeth 8 mm, approx. 3.2 kg / m² with teeth 10 mm Color white

near temperature independent (from +2 ° C) crystalline water bonding fast hardening and high flexibility minimizes efflorescence Near temperature independent, powdery, crystalline water-binding, water- and frost-resistant, highly hardened, fast, hydraulically settable gray grout adhesive in an adhesive layer up to 20 mm thick. The adhesive solution provides great protection against fading and discoloration. Indoor and outdoor for wall and floor installation. Consumption with teeth: approx. 1.8 kg / m² with teeth 6 mm, approx. 2.6 kg / m² with teeth 8 mm, approx. 3.4 kg / m² with teeth 10 mm Color gray

high stability extremely smooth processing no slippage Powdery, food-safe, hydraulically settable flexible adhesive with perfectly matched processing properties. Inside and outside for bonding all types of ceramic materials and opaque, moisture-resistant natural stones, as well as for leveling walls and floors. For all standard building substrates from 2 to 20 mm thick. The adhesive impresses with its smooth finish with extremely high stability and zero slip. Consumption depending on the teeth: approx. 1.6 kg / m² with 6 mm teeth, approx. 2.2 kg / m² with 8 mm teeth, approx. 2.9 kg / m² with 10 mm teeth Light gray

improved stability improved full hardening universally applicable flexible Powdery, frost-free, hydraulically set, hardened, food-safe adhesive mortar for flexible adhesion. For the installation of indoor and outdoor ceramic wall and floor tiles, panels, fine ceramics, natural stones for increased thermal or static loads. Consumption consumption depending on teeth: approx. 1.7 kg / m² with 6 mm teeth, approx. 2.4 kg / m² with 8 mm teeth, approx. 3.1 kg / m² with 10 mm notched teeth Color gray

permanently elastic very elastic membrane aging resistant hydrophobic Sealing collar, lined with fleece on both sides and with a very elastic expansion zone to absorb movement. In this way, pipes of different diameters can be sealed. Murexin sealed collars are waterproof and also chemically resistant to dilute acids, alkalis and saline solutions. System components for sealing water inlet / outlet in combination with sealing products or Murexin systems. Color yellow

- prefabricated fittings waterproof left and right versions Prefabricated sealing corner, laminated on both sides with fleece, for filling or sealing the corners of the gradient screed in shower enclosures at floor level. These fittings are designed for the transition of the gradient screed and horizontal screed to the rising wall. System components in combination with sealing products or Murexin systems. Color yellow

prefabricated fittings waterproof left and right versions Prefabricated sealing corner, laminated on both sides with fleece, for filling or sealing the corners of the gradient screed in shower enclosures at floor level. These fittings are designed for the transition of the gradient screed and horizontal screed to the rising wall. System components in combination with sealing products or Murexin systems. Color yellow

prefabricated fittings waterproof left and right versions Prefabricated sealing corner, laminated on both sides with fleece, for filling or sealing the corners of the gradient screed in shower enclosures at floor level. These fittings are designed for the transition of the gradient screed and horizontal screed to the rising wall. System components in combination with sealing products or Murexin systems. Color yellow

prefabricated fittings waterproof left and right versions Prefabricated sealing corner, laminated on both sides with fleece, for filling or sealing the corners of the gradient screed in shower enclosures at floor level. These fittings are designed for the transition of the gradient screed and horizontal screed to the rising wall. System components in combination with sealing products or Murexin systems. Color is yellow

Roll-up and spreadable chemically resistant elastic thixotrope Flexible, solvent-free, permeable, thixotropic, permanently elastic, seamless and seamless two-piece polyurethane-based compound seals. For internal and external sealing on both horizontal and vertical surfaces. Can be applied under various ceramic coatings, in accordance with EN 14891, ÖNORM B 3407 W1-W6, in accordance with DIN 18534 for water exposure classes W0-I to W3-I, in accordance with DIN 18531-5 (balconies, loggias, etc.) and DIN 18535 (pools and containers), as well as in accordance with the test principles for the issuance of a general building inspection certificate. Can be used in swimming pools, large kitchens, industrial wet rooms, showers, bathrooms, etc. Consumption approx. 1.9 kg / m² per mm of layer thickness

2-component rapid hardening can be applied with a trowel tested in accordance with EN 14891 UV resistance Fast hardening, seam and no knock, two-component, low temperature resilient compound seal. Indoors and outdoors for non-shock sealing of walls and floors under ceramic tiles in showers, bathrooms, terraces and balconies. Consumption about 1.5 kg / m² for a layer thickness of mm (about 3 kg / m² for a layer thickness of 2 mm)

rapid quenching very efficiently open to vapor diffusion one component can be trowelled and spread Fast quenching, highly effective, hydraulically set, solvent free, waterproof but still permeable to water vapor, flexible one-component sealant slurry for seamless and seamless composites seals for walls and floors of indoor and outdoor premises. For use with balconies, terraces and pools (up to 4 m), as well as floor heating systems. Tiling is possible after three hours. Consumption about 1.15 kg / m² for a layer thickness of mm (about 2.3 kg / m² for a layer thickness of 2 mm) Color gray

ready-to-use roller or trowel application tested in accordance with EN 14891 very low emission - EC1-PLUS Solvent free, waterproof, one component, permanently elastic, seamless and seamless composite seal. Indoor use only for bumpless sealing of wall and floor surfaces in damp areas (eg showers, bathrooms, steam baths, etc.). To protect against unpressurized water draining directly under the ceramic floor. In accordance with EN 14891, ÖNORM B 3407 W1-W4 and in accordance with DIN 18534 for water exposure class W0-I, W1-I, W2-I (wall) and in accordance with the test principles for issuing a general building inspection certificate ... Consumption about 1.5 kg / m² for a layer thickness of mm (about 0.8 kg / m² for a layer thickness of 0.5 mm) Color blue

- LIQUID FOIL 1 KS ready-to-use roller or trowel application tested in accordance with EN 14891 very low emission - EC1-PLUS Solvent-free, waterproof, one-component, permanently elastic, seamless and seamless composite seal. Indoor use only for bumpless sealing of wall and floor surfaces in damp areas (eg showers, bathrooms, steam baths, etc.). To protect against unpressurized water draining directly under the ceramic floor. In accordance with EN 14891, ÖNORM B 3407 W1-W4 and in accordance with DIN 18534 for water exposure class W0-I, W1-I, W2-I (wall) and in accordance with the test principles for issuing a general building inspection certificate ... Consumption about 1.5 kg / m² for a layer thickness of mm (about 0.8 kg / m² for a layer thickness of 0.5 mm) Color yellow

suitable for laying parquet, tiles and natural stone safer on problem substrates relieves stress Relief of tension reinforcing fleece for laying parquet, tiles and natural stone, especially on problem substrates. Can be used as a reinforcing underlay under solid parquet and ready-to-install parquet, as well as on all conventional, ready-to-install substrates. Especially for use on poor, low-strength substrates and in the renovation sector for dry screeds, chipboard and mastic asphalt. Color white

high-performance noise reduction composite layer that releases stresses more safely on problem substrates Maximum impact noise reduction and stress relief - achieved by multi-layer sandwich construction (built-in special rubber mat) - release plate for ceramic tiles, as well as for parquet and multi-layer parquet, especially for problematic substrates. It can be used to isolate and reduce noise under ceramic coatings on walls and floors in rooms, both for new buildings and especially in the renovation zone. Also suitable for laying parquet and laminate floors on all standard substrates, as well as gluing old tiles and natural stone surfaces, old substrates with glued adhesives and fillers, mastic asphalt, dry screeds and chipboards. Ceramic tiles with a material thickness of less than 10 mm and natural stone with a material thickness of less than 15 mm, as well as for all coating formats less than 30 x 30 cm, require a fiber-reinforced filler filling. White

stress-relieving underlayment reduces impact noise safer on problem substrates very low emissions - EC1-PLUS Stress relief release and impact noise suppression boards for indoor and multi-layer parquet flooring and indoor and outdoor ceramic tiles and natural stone air. The board is used specifically for problematic substrates. The Unitop disconnector plate is a very low emission (GEV-compliant) laying material that is purulent and rot-resistant. It can be used as a decoupling and impact noise reduction board on walls and floors in rooms under many cover materials for traffic loads up to 5 kN / m². Only the 4 mm slab is suitable for use in underfloor heating systems. Color white

- stress-relieving underlayment reduces impact noise safer on problem substrates very low emissions - EC1-PLUS Stress-relieving decoupling and impact attenuation boards for indoor and multi-layer parquet flooring and indoor and outdoor ceramic tiles and natural stone open air. The board is used specifically for problematic substrates. The Unitop disconnector plate is a very low emission (GEV-compliant) laying material that is purulent and rot-resistant. It can be used as a decoupling and impact noise reduction board on walls and floors in rooms under many cover materials for traffic loads up to 5 kN / m². Only the 4 mm slab is suitable for use in underfloor heating systems. Color white