Industrial Equipments and Machines in bulk on Qoovee

We offer for delivery an installation for the removal of flash with a volume of 10 to 120 liters from the leading Taiwanese manufacturer - the PAN STONE company. Supply of tumbling elements and vessels for storing liquid nitrogen. High functionality allows to facilitate the technological process in production.

We offer for delivery rubber-mixing rollers, calender lines from the leading Taiwanese manufacturer of rubber-mixing equipment - the HYMC company. Lots of options and functionality.

We offer for delivery rubber mixers from the leading Taiwanese manufacturer of rubber mixing equipment - the WSM company. Rubber mixers with intermeshing and tangential rotors and a rotary chamber (knider). Lots of options and functionality.

We offer for supply injection / injection hydraulic presses for the production of rubber products from the leading Taiwanese manufacturer of pressing equipment - PAN STONE . Lots of options and functionality.

We offer for delivery hydraulic presses of column and frame type (with and without heating plates), designed for pressing products from composite materials and rubbers from the leading Taiwanese manufacturer of pressing equipment - the PAN STONE company. Lots of options and functionality.

Upon request, the buyer informs us about the color, type and base of the paint.

Introduction: A power transformer is the most costly and essential equipment of an electrical transformer. So for getting high performance and long functional life of the transformer, it is desired to perform various maintenance activities. ASSEN ZYD Transformer Oil Filtration System Machine is portable maintenance equipment, it is a process the reduces, or in fact, eliminates all the physical contaminants from oils by means of physical processes such as oil filtration, dehumidification, and degasification. ZYD transformer oil purification process effectively removes all those particles that are larger than 0.1 microns as well as most of the dissolved water and gases in the oil.   After treatment Moisture PPM ≤3 Gas content % ≤0.01 Impurity size μ ≤1 (no free carbon) Breakdown voltage kV ≥75 IFT dynes/cm ≥40 Acid value mgKOH/g ≤0.03 Dielectric loss factors tgδ(90°C) ≤0.001     ASSEN warrants the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of twenty-six (26) months from date of shipment or twenty-four (24) months after the start-up of the system. ASSEN's obligation under this warranty is limited to repairing or furnishing, a similar part to replace any part, which was proven to be defective within the warranty period. 1. We customize the machine to your requirements.2. We have more than 20 years of export experience.3. We offer our customers high-quality products at a competitive price.4. We offer our customers excellent after-sales service.5. We are not satisfied until our customers are satisfied.       Please contact Assen for the latest quote    

Dakdym Charge+ 10K Portable Power Bank -

New: A brand-new, unused, unopened, undamaged item in its original packaging   Brand: SurRonshop Part Type: Spinning Wheel

We are offering specialized in Conduit Pipe fitting accessories, PPR fittings, and Precision Turned components fitting accessories, Brass Fasteners like Nuts, Bolts, Screws, Washers, Inserts, Brass Anchors, Brass Spray Parts, Brass Pins and all type of precision Brass turned or punched components as per customers specifications and drawings. We ensure that every component and fasteners produced at our plant matches in minutest details, those made by technologies anywhere in the world. Our aim is to deliver products with “Zero Defects” with very optimum prices. We appreciate you if you can send us all your requirements for the above-mentioned products.

Due to the rapid development of the high-tech industrialization process, not a single branch of industry today can do without the use of products made of metals or their alloys. The production of such products is one of the activities of the WestMedGroup company. We manufacture metal products to support the production activities of manufacturing and service enterprises specializing in the production and maintenance of all kinds of machines, mechanisms and technological equipment. Our specialists use the latest design methods, modern high-performance equipment with a quality control system to ensure the production of a wide range of processes: laser cutting, milling and turning, cutting sheet materials, metal bending, welding, powder painting of products, etc. If necessary, our designers - qualified specialists of the design department with many years of practical experience will help to develop a product project. Employees of the WestMedGroup company take into account all the wishes of the customer and are ready to perform work of any volume and complexity on a professional level. The full cycle of our own production, equipped with modern equipment, allows us to provide services in metalworking and production of products, to perform work with high quality, accuracy and strict adherence to deadlines.

Industrial machinery equipment

S300 is standart vehicle tracking device which is presenting vehicles tracking,dual satellite system (GPS, GLONASS), trip information, customizable alarms, internal antenna and optional battery and external antenna connection and location accuracy (less than 2.5 m). It has all the necessary solutions for vehicle tracking with its many features. It has the ability to receive data from many satellites such as GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS and DGPS.

Product Details Brand Name: Liming motorProduct Name: Motor For Washing MachineModel Number: YJFPhase: Single-phaseAC Voltage: customizedFrequency: 50/60HzOutput Power: 90wProtect Feature: IP40Certification: CCC,CEColor: BlackHousing: Cold plate stretchingWire: All copper wireBearing: Ball bearingPlace of Origin: Shengzhou, Zhejiang, China Usage: Motor For Washing MachineName: Washer Washing Machine Motor Manufacturing

new vortex flowmeter Proline Prowirl F 200 from Endress + Hauser, manufactured in November 2018, at factory price. Attorney with passport and certificates. Proline Prowirl F 200 Vortex flowmeter Measuring tube made of stainless steel Steel CF3M, Connection DN100, PN40, 1/4404 / F316L EN1092-1-B1 (DIN 2501) flange, 3-point calibration, basic version, ATEX certificate II2G + IECEx Z1 Ex d (ia) IIC Z = Zone, Compact, aluminum, IP67 NEMA4X, M20 cable gland (EEx d: M20 thread), 2 line display; within 4-20 mA HART + pulse-frequency. The flowmeter is included in the register of GSI RK, completed with a certificate of type approval or metrological certification, a valid verification certificate, Year of issue 10. 2018. Prowirl F is a multi-variable flowmeter with integrated wet steam detection. Designed for steam applications and also provides the highest measurement accuracy for gases and liquids in auxiliary processes. Thanks to its unique 2-wire technology, Prowirl F 200 enables cost-effective and easy integration into existing infrastructures. The device also guarantees high operational safety in hazardous areas. Heartbeat Technology ensures continuous process safety

flowmeter manufactured by Siemens 7ME6310-3MF12-2JE1 in the amount of 3 pieces. Year of release 2018. Du80, Ru40. for acidic environments. SITRANS FM MAG 3100 electromagnetic flowmeter sensor (not described) DN80, 3 INCH EN1092-1, PN40 FLANGES CARBON STEEL ASTM A 105 COATING 150MICRON EPDM HASTELLOY C-276 MAG 6000, IP67 / NEMA 4X / 6, CASE, POLISH 115-230V AC 50/60 HZ MODBUS RTU / RS 485 METRIC TERMINAL BOX IN POLYAMIDE OR COMPACT 6000 I.

Counter: turbine, wafer type, EZ - IN series, 1 "x2". Turbine flowmeter, liquid, wafer type, EZ-IN type (device size 1 ", connections: mating with any flange 2"). there is no installation kit for the flow meter. Quantity 132 pieces . 2018 year . ASSY, FLOW ANALYZER, MC-III EXP, LITH PWRD (EXP 9A-50165003 & WP 9A-50165009) 9A-50179024   Part No: 2296694-01; Rev 03 SN : 12112455603 CAMERON USA 03/15/18 The NuFlo ™ Series MC-III ™ EXP Flow Analyzer (Explosion-Proof Extended Display Digitizer) is unmatched as a state-of-the-art, easy-to-use totalizer for liquid and gas flow measurement and data logging using Modbus communications and an explosion-proof enclosure. The MC-III EXP analyzer is capable of storing a large amount of flow information and transmitting it faster than any other flow analyzer on the market. This highly efficient instrument records up to 384 daily data blocks, 768 hour data blocks and 345 event data blocks and can transfer them to a computer in less than a minute using the Modbus® communication protocol! Frequently used operations can be accessed from the front panel six-button keypad or from the dynamic interface software, making it quick and easy to calibrate and tune the unit.   NUFLO EZ-IN Series Turbine Flowmeter Part No: 9A-100062997, Rev 03 ASSY, FM, 1 / 2IN, EZ-N, STD P / N 9A-100005115 a / n Meter SN:   12114198404 CAMERON USA 04/26/18 Max VIP = 25.5MPa Max T = 121 0 C Turbine flowmeters Cameron NuFlo liquid   with EZ IN® end connections with 6 vane rotor (1 "size, connection: mating with any 2" flange). NuFlo Liquid Turbine Meters   are a tool for accurately calculating the flow rate of a fluid flowing through a pipeline. NuFlo Series Turbine Meters indicate flow rate and measure the total volume of fluid flowing through the pipeline. When the liquid flows through the flow meter and the flow around the rotor, the latter rotates with a frequency directly proportional to the flow rate. The movement of the rotor blades is sensed by a magnetic sensing element that generates a sinusoidal electrical signal. This signal is transmitted to indicating measuring devices. Areas of use:   Turbine meters with a variety of end connections and level of accuracy have the following applications: • Measurements when ordering water • Installations for heat treatment • Metering and operational separators • Utilization wells • Carbon dioxide injection • Fuel and feed water for steam generators • Dosing of liquid fertilizers • Measurement of consumption of water, fuel and chemical products in factory conditions • Loading and unloading chemical tanks • Accounting for the consumption of liquid propane • Underground mining and ore leaching     Part Number: 9A-100002077 Rev G Pickup, Nuflo, 7/8, THRU, 8 INCH Cameron 9 A -100002077 Flowmeter Magnetic Pickup Pickup Cameron Nuflo MV-100005111, 9A-100005111 Flow Analyzer Battery Voltage: 3.6 Volts Capacity: 17.0 Ah Chemistry: Lithium-Thionyl Chloride Termination: BA (Button Top - Pressure Terminals) LS33600-CN battery for Cameron Nuflo MC-II plus MC-III, MV-100005111, 9A-1000051

Water treatment plant VPU-12.0 is designed to soften feed water, used for boiler units and other facilities where softened water is required. The main elements of the VPU-12.0 unit are: a counterflow ion exchange filter, a salt solution preparation tank, an electric pump unit, pipelines and fittings. The equipment of the unit is mounted on a frame. The operation of the VPU-12.0 installation includes the following operations: softening of water; loosening of the cation exchanger; regeneration of the cation exchanger; washing of the cation exchanger from the regeneration products. During softening, the source water is pumped into an ion exchange counterflow filter and, passing from top to bottom, enters the feed water tank. To loosen the blocking layer of the cation exchanger, the source water enters the middle distributor of the ion exchanger and is discharged through the upper distributor into the gravity drainage. The loosening process is carried out until the discharge water is completely clarified. Periodically (after 10-20 filter cycles), the entire layer of the cation exchanger is loosened. Regeneration of the cation exchanger is carried out with a 5-8% solution of sodium chloride. To prepare this solution, the initial water is supplied to the ejector, where a 20-25% salt solution is simultaneously supplied from the tank. Regeneration of the cation exchanger is carried out in two streams. The main part of the 5-8% regeneration solution (~ 76%) is fed into the lower distributor of the filter and passes through the auxiliary and main layers from the bottom up. The rest of the flow (~ 24%) is fed into the upper distributor and passes from top to bottom through the blocking layer. The spent regeneration solution is discharged through the middle distributor. The cation exchanger is washed with feed water, which is also supplied in two streams, the main stream (~ 76%) enters through the lower distributor. A smaller part of the flow (~ 24%) is supplied through the upper distributor. The wash water is discharged through the middle distribution device into the gravity drain. The end of cleaning is controlled by the hardness of the water after the middle distributor. After the end of washing, the VPU-12.0 unit is transferred to the source water softening mode.

Water treatment plant VPU-6.0 is designed to soften feed water, used for boiler units and other facilities where softened water is required. The main elements of the VPU-6.0 unit are: a counterflow ion exchange filter, a salt solution preparation tank, an electric pump unit, pipelines and fittings. The equipment of the unit is mounted on a frame. The VPU-6.0 unit operation includes the following operations: softening of water; loosening of the cation exchanger; regeneration of the cation exchanger; washing of the cation exchanger from the regeneration products. During softening, the source water is pumped into an ion exchange counterflow filter and, passing from top to bottom, enters the feed water tank. To loosen the blocking layer of the cation exchanger, the source water enters the middle distributor of the ion exchanger and is discharged through the upper distributor into the gravity drainage. The loosening process is carried out until the discharge water is completely clarified. Periodically (after 10-20 filter cycles), the entire layer of the cation exchanger is loosened. Regeneration of the cation exchanger is carried out with a 5-8% solution of sodium chloride. To prepare this solution, the source water is fed to the ejector, where a 20-25% salt solution is simultaneously fed from the tank. Regeneration of the cation exchanger is carried out in two streams. The main part of the 5-8% regeneration solution (~ 76%) is fed into the lower distributor of the filter and passes the auxiliary and main layers from the bottom up. The rest of the flow (~ 24%) is fed to the upper distributor and flows from top to bottom of the blocking layer. The spent regeneration solution is discharged through the middle distributor. Washing of the cation exchanger is carried out with source water, which is also supplied in two streams, the main stream (~ 76%) enters through the lower distributor. A smaller part of the flow (~ 24%) is fed through the upper distributor. The wash water is discharged through the middle distribution device into the gravity drain. The end of cleaning is controlled by the water hardness downstream of the middle distributor. After the end of washing, the VPU-6.0 unit is transferred to the source water softening mode.

Water treatment plant VPU-3.0 is designed to soften feed water, used for boiler units and other facilities where softened water is required. The main elements of the VPU-3.0 unit are: a counterflow ion exchange filter, a salt solution preparation tank, an electric pump unit, pipelines and fittings. The equipment of the unit is mounted on a frame. The VPU-3.0 unit operation includes the following operations: softening of water; loosening of the cation exchanger; regeneration of the cation exchanger; washing of the cation exchanger from the regeneration products. During softening, the source water is pumped into an ion exchange counterflow filter and, passing from top to bottom, enters the feed water tank. To loosen the blocking layer of the cation exchanger, the source water enters the middle distributor of the ion exchanger and is discharged through the upper distributor into the gravity drainage. The loosening process is carried out until the discharge water is completely clarified. Regeneration of the cation exchanger is carried out with a 5-8% solution of sodium chloride. To prepare this solution, the initial water is supplied to the ejector, where a 20-25% salt solution is simultaneously supplied from the tank. Regeneration of the cation exchanger is carried out in two streams. The main part of the 5-8% regeneration solution (~ 76%) is fed into the lower distributor of the filter and passes through the auxiliary and main layers from the bottom up. The rest of the flow (~ 24%) is fed into the upper distributor and passes from top to bottom through the blocking layer. The spent regeneration solution is discharged through the middle distributor. The cation exchanger is washed with feed water, which is also supplied in two streams, the main stream (~ 76%) enters through the lower distributor. A smaller part of the flow (~ 24%) is supplied through the upper distributor. The wash water is discharged through the middle distribution device into the gravity drain. The end of cleaning is controlled by the hardness of the water after the middle distributor. After the end of washing, the VPU-3.0 unit is transferred to the source water softening mode.

Water treatment plant VPU-2.5 is designed to soften feed water, used for boiler units and other facilities where softened water is required. N / a Name Value one Productivity, m 3 / h 2.0 2 Working pressure, MPa (kgf / cm 2 ) 0.6 (6.0) 3 Medium temperature, o C 40 four Overall dimensions (Length, mm) 1500 five Overall dimensions (Height, mm) 2295 6 Nominal diameter, mm 885 7 Factory delivery weight, kg, no more 560 The main elements of the VPU-2.5 unit are: a counterflow ion exchange filter, a clarifying filter, an electric pump unit, pipelines and fittings. The equipment of the unit is mounted on a frame. The VPU-2.5 unit operation includes the following operations: softening of water; loosening of the cation exchanger in the ion exchanger; regeneration of the cation exchanger; washing the cation exchanger from the regeneration products; loosening of the clarifying filter cation exchanger; washing of the clarifying filter cation exchanger. During softening, the source water is pumped into the clarification filter, then it enters the ion exchange counterflow filter and, passing from top to bottom, enters the feed water tank. To loosen the cation exchanger layer, the source water, after passing through the clarifying filter, enters the lower distributor of the ion exchanger and is discharged into the gravity drainage system. When clear water appears, loosening is stopped. To restore the ion-exchange capacity of the cation exchanger, the cation exchanger is regenerated with a solution of sodium chloride. Washing of the cation exchanger is carried out with source water, which is supplied from the clarification filter. Loosening and washing of the clarifying filter cation exchanger is carried out when the pressure loss in the filter increases to 0.1 MPa and the quality of the clarified water deteriorates. Loosening of the entire layer of the filter bed is carried out in an upward flow. Loosening of the filter bed is carried out until a sharp clarification of the wash water. After loosening the filter bed of the clarifying filter, it is washed until the wash water is sharply clarified.

Water treatment plant VPU-1.0 is designed to soften feed water, used for boiler units and other facilities where softened water is required. N / a Name Value one Productivity, m 3 / h 1.0 2 Working pressure, MPa (kgf / cm 2 ) 0.6 (6.0) 3 Medium temperature, o C 40 four Overall dimensions (Length, mm) 1765 five Overall dimensions (Height, mm) 1605 6 Nominal diameter, mm 865 7 Factory delivery weight, kg, no more 390 The main elements of the VPU-1.0 unit are: a counterflow ion exchange filter, a salt solution preparation tank, an electric pump unit, pipelines and filter fittings. The equipment of the unit is mounted on a frame. The production process at the water treatment plant consists in softening the treated water, stopping the filter for regeneration, loosening the cation exchanger by the reverse flow of water. The VPU-1.0 unit operates according to the parallel-precision Na-cationization scheme. Initial water is supplied to the upper part of the filter in the upper distribution device. Having passed through the cationite loading of the filter in the direction from top to bottom, the water softens, exits from the bottom of the filter and is discharged into the feed tank, from where it is disassembled for consumption. As the cation exchange filter depletes, the residual hardness of the softened water increases and, when the maximum permissible value of this value is reached, the unit is turned off for regeneration. Regeneration of the cation exchange filter is carried out with a 6-8% sodium chloride solution prepared in the tank. At the end of the regeneration, the filter is turned on. All equipment of a block water treatment plant - a cation exchange filter, its upper distribution device, a salt solution preparation tank and pipelines are made of carbon steel. The lower distributor of the filter is made of polymeric material.

FormLabs Form 3l 3D Printers Condition of the goods: You will receive full transparency on the individual products, their condition, product prices and informative photos. The goods are in good condition and are visually inspected and classified in category A, B and C.   Minimum purchase: Individual trucks will be made up for you. The price quoted is a truck average price, therefore the price will vary depending on your selection.   Household goods: Consumer Electronics: Computer Appliances: Electric Electrical Cameras, Laptops, Mobile Phones, Drones, Graphics Cards, Motherboards, Video Games, Antminers, Dishwasher, freezer, cookers, fridge/freezer, oven, dryer, washing machine.   Top Brands: Apple,Sony,Panasonic,Heir Thermocool,MSI,Gigabyte,AMD,AEG, Bosch, Bauknecht, LG, Neff, Samsung, Siemens.   Appointment: After making an appointment, you are welcome to visit our warehouse in Nuremberg at any time and convince yourself of our high quality.   Contact: For further details, please send us your contact details as a message, or contact us by phone. We look forward to a successful cooperation.   MACHINERY CONNECTIONS, CMT - CORPS OHIO, USA

SPECIFICATIONS Print technology: Fused Deposition Modeling Filament Diameter: 2.85mm Build area: 230 x 190 x 200mm Minimum layer resolution: 20 microns Maximum layer resolution: 600 microns Dimensions: 394 x 489 x 637mm Weight: 14.4kg                     Condition of the goods: You will receive full transparency on the individual products, their condition, product prices and informative photos. The goods are in good condition and are visually inspected and classified in category A, B and C.   Minimum purchase: Individual trucks will be made up for you. The price quoted is a truck average price, therefore the price will vary depending on your selection.   Household goods: Consumer Electronics: Computer Appliances: Electric Electrical Cameras, Laptops, Mobile Phones, Drones, Graphics Cards, Motherboards, Video Games, Antminers, Dishwasher, freezer, cookers, fridge/freezer, oven, dryer, washing machine.   Top Brands: Apple,Sony,Panasonic,Heir Thermocool,MSI,Gigabyte,AMD,AEG, Bosch, Bauknecht, LG, Neff, Samsung, Siemens.   Appointment: After making an appointment, you are welcome to visit our warehouse in Nuremberg at any time and convince yourself of our high quality.   Contact: For further details, please send us your contact details as a message, or contact us by phone. We look forward to a successful cooperation.   MACHINERY CONNECTIONS, CMT - CORPS OHIO, USA  

The Gemeral MIG 200 welding machine is a convenient and lightweight machine that can be used at home and in professional activities. Thanks to a duty cycle of 60%, the device easily welds long seams with a minimum waste of time and a complete absence of overheating. The wide and stiff handle at the top of the case makes it easy to transport. All external elements are securely fastened and do not vibrate during transportation or welding. The model is capable of working in several modes. Welding with and without shielded gases facilitates the selection of the type of wire. There is an additional gas heating function. Also, the welding machine can be used for welding aluminum with non-fusible electrodes. The wire feeder is located directly in the body of the machine. This ensures compactness and ease of use. Ease of changing the coil due to the quick opening of the housing speeds up the welder's work process. The control panel is equipped with a display. This allows you to monitor the current amperage. There are two controllers for adjustment, which adjust the amperage and wire feed speed. The simple control panel is ideal for beginners and experienced welders.

The Gemeral MIG 160 welding machine allows you to work in hard-to-reach places. The model uses a self-shielded flux-cored wire with a diameter of 0.8-1 mm as a tooling. The wear-resistant 2-roller feeder is made of metal, which increases the service life of the device. The compact body and low weight make it easy to transport and also make it possible to work at height. Equipment: Apparatus. Burner Coil 1 kg 0.8. Ground wire. Passport. Packaging.

We produce custom-made flushing systems according to your specifications: design, delivery, installation. We develop flushing systems for specific production tasks, thereby ensuring high extraction of minerals and maximum economic indicators of their development. The flushing systems are equipped with all the necessary equipment for their start-up, they consist of separate modules placed on a semi-mobile frame ("skis"), which makes it easy to move them during the season.

Conveyor belts are the most common type of conveying machines for conveying a continuous stream of granular (sand, cement), lumpy (crushed stone, gravel, etc.) And piece (bricks, blocks, tiles, etc.) Of the materials in the horizontal and inclined positions ... The power and dimensions of the manufactured conveyor depend on the application and operating conditions.

This equipment is designed for rapid preliminary dewatering and wet classification of predominantly small fractions (e.g. coal sludge, sand)

Inertial screens of heavy type are designed for mechanical sorting of bulk or lumpy ore materials by size. They are optimally suited for working with coal, ore, gravel, crushed stone with a size separation of 20 to 350 mm.

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training The mobile concrete batching plant Sumab K-40 is intended to produce high-quality concrete and concrete mixes. Exact performance of plant capacity depends on type and mark of produced concrete and on used aggregates, cement and quantity of chemical additives. Batching plant is mounted on a container frame and can be transported on a 40 foot open top container.4 aggregate storages, mixer 1500/1000 liters. Additive pump, high pressure compressor. Computer Siemens (100 concrete sorts). Batching plant equipped with comfortable cabin and system of automatic control of the plant. Modern computer system Siemens enables to produce 100 recipes and sorts of concrete. You can print each mixture of ready batch in kilograms and percent, that prevents the theft of cement or aggregates in the preparation of a concrete mix.Optionally can be delivered: cement silo, cement screw, belt conveyer of supply ready-mixed concrete from the mixer. If you need more information, you can visit our website, or send a request. We will necessarily find the best solution for you! We are ready to invite you to see our existing concrete plants, which were manufactured in 1980-s. They are still in the ranks!Concrete plants SUMAB are a guarantee of quality, durability and reliability. Batching plant is produced on Scandinavian technology, using components from leading European manufacturers! Scandinavian quality at the best price!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   Fully automatic batching plant. The plant is designed on a container frame. 4 aggregate storages, turbine type mixer 1200/800 liters. Water tank 250 l. Automatic control of a plant: Computer Siemens (100 concrete recipes). Control room container 2,5 x 2,5 x 2,95m. Swedish quality. Good price. Mobile concrete plant is equipped with a comfortable cabin and system of automatic control of the plant. Modern computer system Siemens enables to produce 100 recipes and sorts of concrete. You can print each mixture of ready batch in kilograms and percent, that prevents the theft of cement or aggregates in the preparation of a concrete mix.

The cast iron block economizer EB1-808 is a tubular heat exchanger, in which the feed water is heated before entering the boiler to a temperature of 30 - 40 ° C below the boiling point in order to prevent vaporization and water hammer inside it. Heating occurs due to the heat of the exhaust gases, thereby increasing the efficiency of the boiler unit. Economizers consist of bundles of finned pipes, interconnected and enclosed in a frame with a heat-insulating sheathing. Completed (at the request of the customer) with a box for gas supply. The movement of feed water in pipes that make up a common heating surface is towards the flow of flue gases. The use of cast iron in heating surfaces and fittings significantly increases the service life compared to steel economizers. The use of steam (P) or gas-impulse (I) cleaning will allow you to constantly have clean heating surfaces, which means that you save fuel with minimal maintenance and the complete elimination of manual labor. By agreement with the Customer, the economizer can be equipped with a device for cleaning heating surfaces GUV (shock wave generator). Supplied assembled, one transportable unit. The installation of the economizer is reduced to its installation on the foundation, the manufacture and installation of a supply gas duct with explosive safety valves, and its connection to the boiler feed pipelines. Installation of the cleaning system - in accordance with the boiler room project and passport. To ensure gas tightness, sheet or corded asbestos should be laid between the economizer and the foundation. Fastening to the foundation is carried out by welding the lower frame of the economizer to the embedded elements. The upper gas duct is welded to the economizer with a continuous seam. In two-column EB economizers, the economizer and gas duct partitions must be welded together. After completion of installation, subject the economizer to a hydraulic test. They are installed individually on a boiler or on a group of boilers of low pressure (up to 2.4 MPa) and low power and can be disconnected from the boilers both through the gas and water paths.

The cast iron block economizer EB1-708 is a tubular heat exchanger, in which the feed water is heated before entering the boiler to a temperature of 30 - 40 ° C below the boiling point in order to prevent vaporization and water hammer inside it. Heating occurs due to the heat of the exhaust gases, thereby increasing the efficiency of the boiler unit. Economizers consist of bundles of finned pipes, interconnected and enclosed in a frame with a heat-insulating sheathing. Completed (at the request of the customer) with a box for gas supply. The movement of feed water in pipes that make up a common heating surface is towards the flow of flue gases. The use of cast iron in heating surfaces and fittings significantly increases the service life compared to steel economizers. The use of steam (P) or gas-impulse (I) cleaning will allow you to constantly have clean heating surfaces, which means that you save fuel with minimal maintenance and the complete elimination of manual labor. By agreement with the Customer, the economizer can be equipped with a device for cleaning heating surfaces GUV (shock wave generator). Supplied assembled, one transportable unit. The installation of the economizer is reduced to its installation on the foundation, the manufacture and installation of a supply gas duct with explosive safety valves, and its connection to the boiler feed pipelines. Installation of the cleaning system - in accordance with the boiler room project and passport. To ensure gas tightness, sheet or corded asbestos should be laid between the economizer and the foundation. Fastening to the foundation is carried out by welding the lower frame of the economizer to the embedded elements. The upper gas duct is welded to the economizer with a continuous seam. In two-column EB economizers, the economizer and gas duct partitions must be welded together. After completion of installation, subject the economizer to a hydraulic test. They are installed individually on a boiler or on a group of boilers of low pressure (up to 2.4 MPa) and low power and can be disconnected from the boilers both through the gas and water paths.

The cast iron block economizer EB1-646 is a tubular heat exchanger in which the feed water is heated before entering the boiler to a temperature of 30 - 40 ° C below the boiling point in order to prevent vaporization and water hammer inside it. Heating occurs due to the heat of the exhaust gases, thereby increasing the efficiency of the boiler unit. Economizers consist of bundles of finned pipes, interconnected and enclosed in a frame with a heat-insulating sheathing. Completed (at the request of the customer) with a box for gas supply. The movement of feed water in pipes that make up a common heating surface is towards the flow of flue gases. The use of cast iron in heating surfaces and fittings significantly increases the service life compared to steel economizers. The use of steam (P) or gas-impulse (I) cleaning will allow you to constantly have clean heating surfaces, which means that you save fuel with minimal maintenance and the complete elimination of manual labor. By agreement with the Customer, the economizer can be equipped with a device for cleaning heating surfaces GUV (shock wave generator). Supplied assembled, one transportable unit. The installation of the economizer is reduced to its installation on the foundation, the manufacture and installation of a supply gas duct with explosive safety valves, and its connection to the boiler feed pipelines. Installation of the cleaning system - in accordance with the boiler room project and passport. To ensure gas tightness, sheet or corded asbestos should be laid between the economizer and the foundation. Fastening to the foundation is carried out by welding the lower frame of the economizer to the embedded elements. The upper gas duct is welded to the economizer with a continuous seam. In two-column EB economizers, the economizer and gas duct partitions must be welded together. After completion of installation, subject the economizer to a hydraulic test. They are installed individually on a boiler or on a group of boilers of low pressure (up to 2.4 MPa) and low power and can be disconnected from the boilers both through the gas and water paths.

The cast iron block economizer EB1-330 is a tubular heat exchanger, in which the feed water, before entering the boiler, is heated to a temperature of 30 - 40 ° C below the boiling point in order to prevent vaporization and water hammer inside it. Heating occurs due to the heat of the exhaust gases, thereby increasing the efficiency of the boiler unit. Economizers consist of bundles of finned pipes, interconnected and enclosed in a frame with a heat-insulating sheathing. Completed (at the request of the customer) with a box for gas supply. The movement of feed water in pipes that make up a common heating surface is towards the flow of flue gases. The use of cast iron in heating surfaces and fittings significantly increases the service life compared to steel economizers. The use of steam (P) or gas-impulse (I) cleaning will allow you to constantly have clean heating surfaces, which means that you save fuel with minimal maintenance and the complete elimination of manual labor. By agreement with the Customer, the economizer can be equipped with a device for cleaning heating surfaces GUV (shock wave generator). Supplied assembled, one transportable unit. The installation of the economizer is reduced to its installation on the foundation, the manufacture and installation of a supply gas duct with explosive safety valves, and its connection to the boiler feed pipelines. Installation of the cleaning system - in accordance with the boiler room project and passport. To ensure gas tightness, sheet or corded asbestos should be laid between the economizer and the foundation. Fastening to the foundation is carried out by welding the lower frame of the economizer to the embedded elements. The upper gas duct is welded to the economizer with a continuous seam. In two-column EB economizers, the economizer and gas duct partitions must be welded together. After completion of installation, subject the economizer to a hydraulic test. They are installed individually on a boiler or on a group of boilers of low pressure (up to 2.4 MPa) and low power and can be disconnected from the boilers both through the gas and water paths.

The cast iron block economizer EB1-300 is a tubular heat exchanger, in which the feed water is heated before entering the boiler to a temperature of 30 - 40 ° C below the boiling point in order to prevent vaporization and water hammer inside it. Heating occurs due to the heat of the exhaust gases, thereby increasing the efficiency of the boiler unit. Economizers consist of bundles of finned pipes, interconnected and enclosed in a frame with a heat-insulating sheathing. Completed (at the request of the customer) with a box for gas supply. The movement of feed water in pipes that make up a common heating surface is towards the flow of flue gases. The use of cast iron in heating surfaces and fittings significantly increases the service life compared to steel economizers. The use of steam (P) or gas-impulse (I) cleaning will allow you to constantly have clean heating surfaces, which means that you save fuel with minimal maintenance and the complete elimination of manual labor. By agreement with the Customer, the economizer can be equipped with a device for cleaning heating surfaces GUV (shock wave generator). Supplied assembled, one transportable unit. The installation of the economizer is reduced to its installation on the foundation, the manufacture and installation of a supply gas duct with explosive safety valves, and its connection to the boiler feed pipelines. Installation of the cleaning system - in accordance with the boiler room project and passport. To ensure gas tightness, sheet or corded asbestos should be laid between the economizer and the foundation. Fastening to the foundation is carried out by welding the lower frame of the economizer to the embedded elements. The upper gas duct is welded to the economizer with a continuous seam. In two-column EB economizers, the economizer and gas duct partitions must be welded together. After completion of installation, subject the economizer to a hydraulic test. They are installed individually on a boiler or on a group of boilers of low pressure (up to 2.4 MPa) and low power and can be disconnected from the boilers both through the gas and water paths.

The cast iron block economizer EB2-236 is a tubular heat exchanger in which the feed water is heated before entering the boiler to a temperature of 30 - 40 ° C below the boiling point in order to prevent vaporization and hydraulic shocks inside it. Heating occurs due to the heat of the exhaust gases, thereby increasing the efficiency of the boiler unit. Economizers consist of bundles of finned pipes, interconnected and enclosed in a frame with a heat-insulating sheathing. Completed (at the request of the customer) with a box for gas supply. The movement of feed water in pipes that make up a common heating surface is towards the flow of flue gases. The use of cast iron in heating surfaces and fittings significantly increases the service life compared to steel economizers. The use of steam (P) or gas-impulse (I) cleaning will allow you to constantly have clean heating surfaces, which means that you save fuel with minimal maintenance and the complete elimination of manual labor. By agreement with the Customer, the economizer can be equipped with a device for cleaning heating surfaces GUV (shock wave generator). Supplied assembled, one transportable unit. The installation of the economizer is reduced to its installation on the foundation, the manufacture and installation of a supply gas duct with explosive safety valves, and its connection to the boiler feed pipelines. Installation of the cleaning system - in accordance with the boiler room project and passport. To ensure gas tightness, sheet or corded asbestos should be laid between the economizer and the foundation. Fastening to the foundation is carried out by welding the lower frame of the economizer to the embedded elements. The upper gas duct is welded to the economizer with a continuous seam. In two-column EB economizers, the economizer and gas duct partitions must be welded together. After completion of installation, subject the economizer to a hydraulic test. They are installed individually on a boiler or on a group of boilers of low pressure (up to 2.4 MPa) and low power and can be disconnected from the boilers both through the gas and water paths.

The EB2-200 cast iron block economizer is a tubular heat exchanger, in which the feed water is heated before entering the boiler to a temperature of 30 - 40 ° C below the boiling point in order to prevent vaporization and hydraulic shocks inside it. Heating occurs due to the heat of the exhaust gases, thereby increasing the efficiency of the boiler unit. Economizers consist of bundles of finned pipes, interconnected and enclosed in a frame with a heat-insulating sheathing. Completed (at the request of the customer) with a box for gas supply. The movement of feed water in pipes that make up a common heating surface is towards the flow of flue gases. The use of cast iron in heating surfaces and fittings significantly increases the service life compared to steel economizers. The use of steam (P) or gas-impulse (I) cleaning will allow you to constantly have clean heating surfaces, which means that you save fuel with minimal maintenance and the complete elimination of manual labor. By agreement with the Customer, the economizer can be equipped with a device for cleaning heating surfaces GUV (shock wave generator). Supplied assembled, one transportable unit. The installation of the economizer is reduced to its installation on the foundation, the manufacture and installation of a supply gas duct with explosive safety valves, and its connection to the boiler feed pipelines. Installation of the cleaning system - in accordance with the boiler room project and passport. To ensure gas tightness, sheet or corded asbestos should be laid between the economizer and the foundation. Fastening to the foundation is carried out by welding the lower frame of the economizer to the embedded elements. The upper gas duct is welded to the economizer with a continuous seam. In two-column EB economizers, the economizer and gas duct partitions must be welded together. After completion of installation, subject the economizer to a hydraulic test. They are installed individually on a boiler or on a group of boilers of low pressure (up to 2.4 MPa) and low power and can be disconnected from the boilers both through the gas and water paths.

The cast iron block economizer EB2-142 is a tubular heat exchanger, in which the feed water is heated before entering the boiler to a temperature of 30 - 40 ° C below the boiling point in order to prevent vaporization and water hammer inside it. Heating occurs due to the heat of the exhaust gases, thereby increasing the efficiency of the boiler unit. Economizers consist of bundles of finned pipes, interconnected and enclosed in a frame with a heat-insulating sheathing. Completed (at the request of the customer) with a box for gas supply. The movement of feed water in pipes that make up a common heating surface is towards the flow of flue gases. The use of cast iron in heating surfaces and fittings significantly increases the service life compared to steel economizers. The use of steam (P) or gas-impulse (I) cleaning will allow you to constantly have clean heating surfaces, which means that you save fuel with minimal maintenance and the complete elimination of manual labor. By agreement with the Customer, the economizer can be equipped with a device for cleaning heating surfaces GUV (shock wave generator). Supplied assembled, one transportable unit. The installation of the economizer is reduced to its installation on the foundation, the manufacture and installation of a supply gas duct with explosive safety valves, and its connection to the boiler feed pipelines. Installation of the cleaning system - in accordance with the boiler room project and passport. To ensure gas tightness, sheet or corded asbestos should be laid between the economizer and the foundation. Fastening to the foundation is carried out by welding the lower frame of the economizer to the embedded elements. The upper gas duct is welded to the economizer with a continuous seam. In two-column EB economizers, the economizer and gas duct partitions must be welded together. After completion of installation, subject the economizer to a hydraulic test. They are installed individually on a boiler or on a group of boilers of low pressure (up to 2.4 MPa) and low power and can be disconnected from the boilers both through the gas and water paths.