Industrial Equipments and Machines in bulk on Qoovee

Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System Key words: Lip Shroud for Electric Rope Shovel, Lip Shroud for Cast Lip with V91 Tooth System   A&S Machinery Co., Ltd. supplies Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System which are applicable for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System, A&S Machinery also supply V91 bucket tooth, V91 tooth pin, V91 adapter, wedge, c-clamp, wear cap, wing shroud for electric rope shovel.   If any interest in Lip Shroud for Electric Rope Shovel Cast Lip with V91 Tooth System, V91 bucket tooth, V91 tooth pin, V91 adapter, wedge, c-clamp, wear cap, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

Cast Lip with V91 Tooth, Pin and Adapter for Electric Rope Shovel Key words: Cast lip with V91 tooth, Cast lip with V91 tooth, Electric Rope Shovel Cast Lip with V91 tooth   A&S Machinery Co., Ltd. supplies Cast Lip with V91 Tooth, Pin and Adapter for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides Cast Lip with V91 Tooth, Pin and Adapter, A&S Machinery also supply wedge, c-clamp, wear cap, lip shroud, wing shroud for electric rope shovel.   If any interest in Cast Lip with V91 Tooth, Pin and Adapter, wear cap, wedge, c-clamp, lip shroud, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

V91 Bucket Tooth Adapter for Electric Rope Shovel Key words: V91 Bucket Tooth Adapter, V91 electric shovel tooth adapter, V91 c-clamp    A&S Machinery Co., Ltd. supplies V91 Bucket Tooth Adapter for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides V91 Bucket Tooth Adapter, A&S Machinery also supply cast lip with V91 tooth system,  V91 bucket tooth, V91 tooth pin, wedge, c-clamp, wear cap, lip shroud, wing shroud for electric rope shovel.   If any interest in V91 bucket tooth adapter, wear cap, wedge, c-clamp, cast lip with V91 tooth, bucket tooth, lip shroud, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

V91 Bucket Tooth Pin for Electric Rope Shovel Key words: V91 Bucket Tooth Pin, V91 electric shovel tooth pin, V91 bucket tooth wedge, V91 c-clamp,    A&S Machinery Co., Ltd. supplies V91 Bucket Tooth pin, wedge, c-clamp for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides V91 Bucket Tooth pin, wedge, c-clamp, A&S Machinery also supply cast lip with V91 tooth system, V91 bucket tooth, V91 adapter, wear cap, lip shroud, wing shroud for electric rope shovel.   If any interest in V91 bucket tooth pin, wedge, c-clamp, V91 adapter, wear cap, lip shroud, wing shroud, cast lip with V91 tooth system for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

V91 Bucket Tooth/Tooth Tip/Tooth Point for for Electric Rope Shovel Key words: V91 bucket tooth, V91 tooth tip, V91 tooth point, V91 electric shovel tooth   A&S Machinery Co., Ltd. supplies V91 Bucket Tooth/Tooth Tip/Tooth Point for the following electric rope shovels with Whisler or Whisler Plus (WH8, WH10, WH12) bucket lips.   Fushun mining electric rope shovel FWK-12 Fushun mining electric rope shovel FWK-4A Fushun mining electric rope shovel FWK-4 Fushun mining electric rope shovel 4m³ Fushun mining electric rope shovel 12m³ FUWA electric rope shovel WD400A TZ electric rope shovel wk-35 TZ electric rope shovel wk-27  TZ electric rope shovel WB4/40 TZ electric rope shovel WP-6 TZ electric rope shovel WK-12 TZ electric rope shovel WK-4B TZ electric rope shovel H121 TZ electric rope shovel WZ-4 TZ electric rope shovel WK-20 TZ electric rope shovel WK-10B TZ electric rope shovel WK-8 TZ electric rope shovel WK-10B TZ electric rope shovel WK-4C TZ electric rope shovel WK-4A TZ electric rope shovel WK-75 TZ electric rope shovel WK-55 TZ electric rope shovel WK-12C P＆H electric rope shovel 4100XPC/A/B P＆H electric rope shovel 4100C BOSS  P＆H electric rope shovel 4100C P＆H electric rope shovel 2800XPC/A/B P＆H electric rope shovel 2300XPC/A/B P＆H electric rope shovel 4100XPC AC-90 P＆H electric rope shovel 4800XPC/A/B P＆H electric rope shovel 1900XPC/A/B P＆H electric rope shovel 9010C P＆H electric rope shovel 9020XPC P＆H electric rope shovel 9020C P＆H electric rope shovel 2650CX Bucyrus electric rope shovel 495HR2 Bucyrus electric rope shovel 495HF2 Bucyrus electric rope shovel 495HD Bucyrus electric rope shovel 395 Bucyrus electric rope shovel 295HR Bucyrus electric rope shovel 295HD Bucyrus electric rope shovel 182M CAT electric rope shovel 7395 CAT electric rope shovel 7495 HD CAT electric rope shovel 7295 CAT electric rope shovel 7495 WITH ROPE CROWD CAT electric rope shovel 7495 WITH HYDRACROWD CAT electric rope shovel 7495 HF WITH ROPE CROWD CAT electric rope shovel 7495 HF WITH HYDRACROWD CAT electric rope shovel 8000 CAT electric rope shovel 8200 CAT electric rope shovel 8750   Besides V91 bucket tooth/tooth tip/tooth points, A&S Machinery also supply cast lip with V91 tooth system, V91 tooth pin, wedge, V91 adapter, lip shroud, wing shroud for electric rope shovel.   If any interest in V91 bucket tooth/tooth tip/tooth points, cast lip with V91 tooth system, V91 tooth pin, wedge, V91 adapter, wear cap, lip shroud, wing shroud for electric rope shovel, please inquire for more details.   Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. 469 Xinsheng Road, Gaoxin District, Chengdu, China

This Kit F/S Printhead CE2 is suitable for Océ Arizona 550 and Fujifilm Acuity Advance HS HD3545 printers. This is the original Océ part (number 3010112660) - Toshiba CE4 printhead.printer competible:Canon OcéArizona 550 GTArizona 550 XTFujifilmAcuity Advance HS HD3545Acuity Advance HS HD3545 X2  

The JV34-260 Printhead ID Set solvent printhead is based upon the most recent Epson technology. This is the original Mimaki part (number M010792).         This printhead assy is suitable for the Mimaki JV34-260 printers. The JV34-260 Printhead ID Set has a native resolution of 360 dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.The JV34-260 Printhead ID Set can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the JV34-260 Printhead ID Set is 8 kHz.COMPATIBLE PRINTERS :MimakiJV34-260TS34-1800A

Super-Phobic Membrane Contactor - G638W This Membrane Contactor is suitable for Durst Rho 350 series printers. This is the original 3M part (number G638W).Membrane Characteristics:Cartridge Configuration: No Baffle Radial Flow Liquid Flow Guidelines 100 ml/min – 1 liter/min (Liquid must flow on the shellside)Membrane/Potting Material Polyolefin UP-II / PolyethyleneTypical Membrane Surface Area: 0.3 m2Shellside: 77 mlHousing Characteristics:Material: PolyethyleneShellside(Liquid Inlet/Outlet) : 1/4 inch NPT FemaleLumenside (vacuum) : 1/4 inch NPT FemaleWeight: 140gr (Dry), 220g (liquid full)  

Xaar’s XUsB drive electronics (de) system is a flexible, cost-effective, easy-to integrate solution designed to drive Xaar’s complete range of market leading printheads. The XUSB DE minimises the cost and resource issues faced by OEMs and inkjet innovators when developing bespoke printing systems, and thereby drastically reduces time-to-market.Ideal for use as part of a developer kit or fully integrated into production machines for emerging industrial applications, the compact and robust electronics component can be controlled via a standard PC or laptop to enable quick and easy integration.Compatible printer :NeoltAster-JET 2200  

HP Scitex XLJet Board CCB2 NT - 503000107 This colour control board connects to the print head of the HP Scitex XLJet printers with a flat cable.This is the original HP / HP Scitex part (number 503000107). Manufacturer:HP Scitex Printer compatibility:HP Scitex XL1200 (XLJet) / XL1500 (XLJet+) / Scitex XLJet Premium / Scitex TJ8550 / Scitex TJ8600 / Scitex XP2100 / Scitex XP2750 / Scitex XP5300, HP NUR Expedio 3200 / Expedio Revolution DP part number :PBOSCXL002  

This original Mutoh print head is suitable for Mutoh Drafstation printers. This is the original Mutoh printhead (part number DF-49029) with Mutoh head ID. We recommend replacing the head data cables together with the print head to avoid any problem.COMPATIBLE PRINTERS :EpsonStylus Pro 4400Stylus Pro 4800Stylus Pro 7400Stylus Pro 7800Stylus Pro 9400Stylus Pro 9800

The Konica Minolta KM512 LN printhead is a robust print head , shear mode, piezo on-demand printhead that is usable in binary mode only. The Konica Minolta KM512 LN printhead has 512 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. It is compatible with oil based, solvent and UV inks. This printhead is also known as the Konica Minolta KM512 LNX. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty.On the Agfa :Anapurna Mv and :Anapurna Mw printers, the KM512 LN 42PL is used for Varnish (Mv) or White Ink (Mw). For all other colours, PPHKM512MN is used.COMPATIBLE PRINTERS :AestrikInWear S3304K5InWear S3308K5AgfaAnapurna MvAnapurna MwAllwinC12C8DilliNeo Titan UVT-1606W

The Epson DX4 water-based printhead is suitable for Roland, Mutoh and Mimaki water-based printers. The Epson DX4 printhead has a native resolution of 360 dpi, 2 nozzle lines (corresponding with 2 independent ink channels) and 180 nozzles per line.The Epson DX4 (fourth generation micro-piezo printhead) has a typical firing frequency of 8 kHz, a minimum droplet size of 3.5 pico litre and is used for either 1 colour through both channels or 2 colours through the independent channels.COMPATIBLE Printer :AgfaGrand Sherpa 50 UniversalGrand Sherpa 64 UniversalGrand Sherpa 64 Universal AMATP ColorT 74T 87AzonMicro TEX Proetc  

The Konica Minolta KM512 MN printhead is a robust, shear mode, piezo on-demand printhead that is usable in both binary and 4 level grayscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM512 MN printhead has 512 nozzles with a droplet size of 14 picoliters and a native resolution of 360 dpi. It is compatible with oil based, solvent and UV inks.COMPATIBLE PRINTERS :Ampla DigitalTarga EliteAnhui LiyuVictor KJ2512Victor KJ2520Victor KJ3020CET ColorX-Press FK512ZDilli  

This print head is a brand new Epson solvent print head. It is made in Japan and in a Roland Package. It includes the head code for Roland Solvent printers. It does not include the codes for Mimaki or Mutoh printers. Users of these printers have used their existing codes without any trouble. This includes the solvent resistant inlet and seals which are necessary for solvent printers. If you are using a water based printer, select the Epson DX4 waterbased printhead. Printer parts are sensitive items and there are many factors that go into installing them properly.COMPATIBLE PRINTERS :MimakiJV3-130SJV3-130SLJV3-130SP IIJV3-160SJV3-250SPJV3-75SP IITX2-1600MutohBlizzard 65Blizzard 90Rockhopper 3 65Rockhopper 3 90Rockhopper 3 Extreme 65Rockhopper 3 Extreme 90

Various Chinese solvent printers use the Epson DX5 solvent printhead. This DX5 printhead allows fast speed, high-resolution printing with eco-solvent or mild solvent inks. The Epson DX5 original printhead is delivered in a sealed Epson package.This DX5 printhead model is compatible with all DX5 based Chinese printers and doesn't require any decoder. This is the original Epson DX5 printhead; it is not modified nor coded. COMPATIBLE PRINTERS :AllsignAS1802SAS3202SE6184GalaxyA1801S  

The VJ-1628TD Printhead Assy solvent printhead is based upon the most recent Epson technology. This is the original Mutoh part (number DG-42771).        This printhead assy is suitable for the Mutoh VJ-1628TD printers. The VJ-1628TD Printhead Assy has a native resolution of 360 dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.The VJ-1628TD Printhead Assy can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the VJ-1628TD Printhead Assy is 8 kHz.COMPATIBLE PRINTER :MutohValuejet 1628TDValuejet 2628TD  

         The Ricoh GEN4 greyscale printhead is suitable for a range of water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This Ricoh GEN4 is available in two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or o-ring sealed ink inlet. Ricoh part number N220792W, N220792S or N220792E are all Ricoh GEN4 7PL printheads with a long cable and hose barbs.COMPATIBLE PRINTERS :AgfaJeti 1224 UV HDC FTRJeti 3020 UV Titan FTRAmpla DigitalRio 8000 HybridTarga XT 1804Targa XT 1808Targa XT 1816Targa XT 3204

The VJ-1604 printhead is either used in 4-colours (2 channels per colour) and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for this print head is 8 kHz.It is a new generation printhead that allows fast speed, high resolution printing with eco-solvent and mild solvent inks. This VJ-1604 original printhead is delivered in a sealed Mutoh package. Mutoh part number for this print head is DF-49684.COMPATIBLE PRINTERS :A-TexUltrajet S1500EUltrajet S1625EMutohRJ-900C (Drafstation)RJ-900X (Drafstation)RJ-901C (Drafstation Pro)  

Industrial Machine Control Unit is intended for building distributed systemscontrol and guidance of process equipment (pumps, fans, conveyors, mixers, crushers, etc.). Fields of application - mining enterprises, - processing plants, - enterprises for the manufacture of building mixtures and materials, - enterprises of the agro-industrial complex. Advantages of the Industrial Machine Control Unit The Industrial Machine Control Unit is installed at the technological equipmentlocation and enables to realizedistributed management systemsbuilding, as well as guidance of  single objects, may be used as an input-output system. In comparison with centralized control systems, when for a group mechanisms one controller installed in the electrical room is used, Industrial Machine Control Unit allows: - to exclude the organization of routes and the laying of control cables large - capacity between the electric room and the local mechanism post; - reduce the amount of electrical installation, because number of connections to local post remains the same, with no connections from the outside - controller installed in the electrical room; - to ensure the transfer of information in digital format to the control controller by “twisted” pair; - to ensure the unification of control systems of the same type. Industrial Machine Control Unit are supplied with preinstalled software, which allows to handle the mechanism immediately after connecting process sensors, ensuring a shorter lead time putting the constructing facilities into operation. From the field devices, the Industrial Machine Control Unit can be connected: 10 process sensors; 7 emergency stop sensors; 2 analog signals 4-20 mA or 2 impulse sensors (for example, speed sensors) or 1 analog signal 4-20 mA and 1 pulse sensor. When building a distributed control network, the Industrial Machine Control Unit allows data exchange via the Modbus network with top-level devices. If the control algorithm is implemented at the upper level, the BUPM will provide operation in the data I / O mode.

Belt Optical Scales are intended for measuring weight (volume) of bulk materials transporting by conveyors. Fields of application: Chemical and mining industry; Enterprises of building industry; Enterprises of agricultural industry; Food industry enterprises; Technological processes of other industries, where continuous measurement of bulk materials weight, consumption and dosing is required. Main advantages of Belt Optical Scales: the absence of mechanical contact with the conveyor moving parts; assembling doesn’t demand of interference to the conveyor structure; ability to measure on incline parts; it’s enough even limited space for scales mounting at working place; the installation at the conveyors with the belt width from 400 till 2000 mm; ability to control conveyor belt overtail; monitoring the presence of large-sized material on the belt; data transfer via Modbus, Ethernet or Profibus (on the request Customers); photofixation by event (belt overtail, oversided material and so on). Belt Optical Scales consist of Сross Sectional Area Measuring Device (UIPS) and Processing and Visualization Unit (BOV). Сross Sectional Area Measuring Device (UIPS) Transporting by conveyor material is brightening by tight beam, that contour material, conveyor belt chute and is projecting to the digital video camera matrix. We use laser as a source of light. The video camera is situated in Video Processing Unit of Cross Section Area Measuring Device. Object shooting and cross section area calculation of transporting material is doing till 15 times per second. Average cross section area per second transfere to Processing Unit for the later processing or to the existing technological object’s control system. The output interface is Ethernet. The protocol is Modbus TCP. Cross Sectiom Area Measuring Device is implemented on the basis of three units fixed on a special steel beam of rectangular cross-section: video processing unit; source of laser irradiance; power unit. Processing and Visualization Unit (BOV) Processing and Visualization Unit (BOV) receive data from Cross Sectional Area Measuring Device (UIPS), data from the conveyor belt speed sensor or conveyor speed data from the existing automation system and calculates the volume of the transported material. Based on the entered bulk density, the current weight productivity of the conveyor at the measuring point is calculated. The result can be given in the form of a current signal 4 – 20 mA or in digital form according to the exchange protocol accepted by the customer. In the case of the technological object management system, the calculation of the volume and the current weight productivity can be realized on the existing means of the customer’s automated process control system. In this case, there is no need for a processing unit. Conditions of use: climatic category – UHL4 according to GOST 15150; ambient air temperature – from 0 0С to +45 0С; relative humidity of the environment – not more than 80% at a temperature of +25 ° C; atmospheric pressure – from 84.0 to 106.7 kPa; resistance to the impact of sinusoidal vibrations with a frequency of 5-9 Hz (with an amplitude of 0.35 mm); dust content of air up to 800 mg / m3; permissible frequency variations in the supply network – from +10% to +15% of the rated voltage.    

Pump membrane dosing units NDR-2M are designed for volumetric pressure dosing of neutral and aggressive liquids, emulsions and suspensions. The scope of application of the membrane dosing unit is determined by the resistance of the materials of the flow path in the dosing medium and the design of the electrical equipment. The diaphragm pumping dosing unit NDR-2M can be used for dosing harmful substances, flammable and combustible liquids, provided that safety rules are observed. To increase reliability, the diaphragm metering pump NDR-2M is equipped with a two - layer membrane made   from treated PTFE . 8 advantages of the diaphragm dosing pump NDR-2M: 1. Tightness. During operation of the NDR-2M pump, leakage of the pumped and working fluid is completely excluded. 2. Possibility of regulation without stopping the pump.   The design of the NDR-2M pump provides for flow adjustment during pump operation.   3. Simplicity of operation and maintenance.   In the pump NDR-2M   there is no need to constantly monitor and maintain   plunger seal as is the case with LP plunger pumps. 4. Wear-resistant valve. The diaphragm pump valves are specially designed for long-term operation in contact with aggressive media. Their service life is much longer than that of conventional   pumps LP. 5. Ability to operate the pump at high pressures up to 100 MPa. Many diaphragm pump manufacturers cannot achieve this. 6. Membrane condition monitoring system. If the diaphragm is damaged, the monitoring system will report this. Even in the event of a diaphragm rupture, the pump remains operational until the end of the process. The signaling device can be both a pressure gauge and electronic devices that will report the problem to the control station. 7. Safety system In the event of a blockage in the outlet piping due to faults or errors, a built-in valve will protect the pump from overload.             8. Saving money Favorable price level achieved through our own production   Technical characteristics of the diaphragm pump NDR-2M 40/400: Feed-40 l / hour The pressure at the outlet of the pump is 400 kgf / cm2; Electric motor power - 3 kW 1500 rpm. Factory warranty - 1 year!

PP / PE / PVC Single Layer Corrugated Pipe Extrusion Machine The single-layer corrugated pipe is used in the automotive industry, for the protection of electrical wires, in household appliances, etc. This is due to such quality characteristics as resistance to temperature changes, resistance to corrosion and decay, flexibility, etc. For the manufacture of these products, lines for the production of single-layer corrugated pipes are used. Line composition: · automatic loading hopper; · single screw extruder; · extrusion molding head; · pulling machine; · vacuum mechanism with stainless steel bath; · a bath for cooling with spraying with water (for additional cooling, a fan is installed under the bath); · marking device; · PLC automatic control system with the ability to save workflow programs in the memory; · high-precision automatic cutter; · electric motor; · a set of spare tools and accessories. Equipment for the production of a single-layer corrugated pipe is not a single stationary machine, but consists of a number of modular units, which is convenient in case of repairing devices or replacing one of the units.   Qingdao Tongsan Plastic machinery Co., Ltd / Qingdao Hegu wood-plastic machinery Co., Ltd

High speed single layer corrugated pipe production line High speed single layer corrugated pipe production line High speed single layer corrugated pipe production line The single-layer corrugated pipe is used in the automotive industry, for the protection of electrical wires, in household appliances, etc. This is due to such quality characteristics as resistance to temperature changes, resistance to corrosion and decay, flexibility, etc. For the manufacture of these products, lines for the production of single-layer corrugated pipes are used. Line composition: · automatic loading hopper; · single screw extruder; · extrusion molding head; · pulling machine; · vacuum mechanism with stainless steel bath; · a bath for cooling with spraying with water (for additional cooling, a fan is installed under the bath); · marking device; · PLC automatic control system with the ability to save workflow programs in the memory; · high-precision automatic cutter; · electric motor; · a set of spare tools and accessories. Equipment for the production of a single-layer corrugated pipe is not a single stationary machine, but consists of a number of modular units, which is convenient in case of repairing devices or replacing one of the units.   Specifications: Sphere diameter 8-58mm M model extruder SJ65 / 30 P roizvoditelnost 60-80 kg / h Motor M oschnost 18.5 kw Roizvodstvennaya speed n 20-25 m / min   Qingdao Tongsan Plastic machinery Co., Ltd / Qingdao Hegu wood-plastic machinery Co., Ltd Contact: Valya

Input 110/230VAC Output 12/24VAC Transformer Power:0.5～30VA Degree of Protection:IP00       Primary: 110/230V 50/60Hz Secondary: 12/24VAC          Insulation class:Class A、Class B Insulation:3.75KV Rms Ambient temp: (t)-40℃          Standards compliant:  EN61558-2-6/ UL5085-1/UL5085-2/UL5085-3/UL1446

The floating pump is designed to deliver high amounts of water, drain lagoons resulting from flooding, replenish fire engine tanks with water from outdoor natural water sources. It can also be used in other applications, such as agriculture, building sites, etc. Main specifications: Max. flow 2 400 l/min Total head 22 m Discharge connection Storz A110 (4”) Engine Honda GXV 390 Engine power 7.6 kW / 10.2 HP / 13HP (SAEJ1995) Fuel tank capacity 2.1 l Fuel unleaded petrol (BA 95) Float dimensions (L x W x H) 980 x 710 x 200 mm Device dimensions (L x W x H) 1080 x 730 x 500 mm Dry weight (empty) 53 kg Cat. number vv 287 The pump and the engine are in one unit, so the pump cannot be used independently. The engine shaft goes through the pump block without a sealing. The pump block is bolted to the engine through the supporting plate and the pump cannot be connected to any other engine type. The bottom side of the block is fitted with a cover to prevent debris and particles over 20 mm in diameter. The delivery outlet is fitted with an A 110 (4") Storz coupling. The float body is made of polyethylene by centrifugal injection as one block. The internal wall has about 20 mm of hard polyurethane foamin order to increase resistance to breakthrough which guarantees unsinkability of the device. This design of the float features outstandingstability on the water surface. The frame is used both for carrying and handling the unit and also for fixing a rope to secure it in its position.The design of the pump allows dry-running without damage. The data was measured by the accredited testing laboratory TÚPO No. 1011-2

Cold Shrink Cable Accessory Kits Power Cable Termination Kits & nbsp; ---- ------ & nbsp; & nbsp; & nbsp; PRODUCT & nbsp; & nbsp; DETAILS & nbsp; & nbsp; & nbsp; & nbsp; ------------- < br /> & nbsp; & nbsp; 1. G normal & nbsp; Cable clamp, connection kit, heating kit Heat shrink kit, commonly known as heat shrink & nbsp; heat shrinkable cable head, widely used for XLPE insulated cables of 35 kV and below or cable lugs immersed in oil. Compared with traditional cable accessories, it has the following advantages: small size, light weight, safety, reliability, easy installation. Products comply with GB11033 standard, long-term use temperature range -55 °; C ~ 105 ° C, service life up to 20 years, radial quartile shrinkage ratio and ge; 50%, longitudinal shrinkage ratio & lt; five%. Compression temperature: 110 ° C ~ 140 ° C 2. Technical parameters & nbsp; 1) Sets for a wide range of sizes available wires 2) Completion kits consist of transitions and Medium Length Heat Shrink Tubing

Contact with supplier