Industrial Equipments and Machines in bulk on Qoovee

The vacuum cleaner is developed on the basis of the Dustprom-PP-220/20.4 vacuum cleaner with global modernization and improvement of technical characteristics. Features of the Dastprom PP-220/20. 6-1. 5 model:< / h2>   The vacuum cleaner has a smooth start of the turbines(increases the service life of the turbines);< / li> Installed & nbsp; < a style= "box-sizing: border-box; margin: 0px; padding: 0px; background: 0px 0px; color: #1a70d5; text-decoration-line: none; "target=" _blank "rel=" noopener " >washable ultra-fine filter < /a>;< / li> Equipped with turbine fuse;(avoids premature failure of the turbine due to power surges);< / li> The engine compartment and the second cyclone are made of industrial plastic; For the convenience of transportation, it is equipped with a removable magnetic platform with gray wheels that do not leave traces;< / li> Equipped with 4 nozzles (+set of catchment rubber), a hose (3 meters), a rod and a set of filters;< / li> Designed for cleaning not only mixed garbage, but also fine dust;< / li> As in the vacuum cleaners PP-220/40, PP-220/60, PP-220/75, the garbage collection tank and the cyclone are placed in a single-volume form;< / li> The vacuum cleaner has a tank with a capacity of 20 liters;< / li> The device does not require readjustment to collect liquid, dry, sticky dirt in any combination. No float chambers, replacement bags, etc.;< / li> The small size of the vacuum cleaner allows you to transport it in any passenger car.  Product specifications and configuration are subject to change by the manufacturer without notice. < span style= " box-sizing: border-box; margin: 0px; padding: 0px; font-weight: bold; color: #383838;">Please note! If you have large volumes of dirt, you should pay attention to the model with a large tank volume (from 40 to 75 liters); If your garbage is very heavy, you should pay attention to models with a higher electrical power of 3.0 kW or more.< / li> Standard package includes: Vacuum cleaner;< / li> Floor vacuum cleaner nozzle 360 mm;< / li> Water collecting rubber for the nozzle 360 mm, set (2 pcs);< / li> The nozzle for the vacuum cleaner is slotted with a pile;< / li> Universal slot vacuum cleaner nozzle;< / li> The nozzle for the vacuum cleaner is round with a pile;< / li> Vacuum cleaner rod; the Hose of a vacuum cleaner (standard version, 3 m);< / li> Filter elements (washable HEPA ultra-fine filterandturbine cooling filter). Features Country of manufacture< / span>< / div> Russia  

Industrial vacuum cleaner Dastprom PP-220 / 40.3-3-C2 (Dastprom PP-402 / 3000-2F) Electric power & ndash; 3.0 kW. Turbines 2x1.5 kW for industrial vacuum cleaners C2 & ndash; assembly of 2 car air filters: * Fine filter (large) & ndash; Air filtering element ZIL-133 GYa, 645 x; Fine filter (small) & ndash; Air filtering element DF 6600 & ndash; a universal vacuum cleaner designed for cleaning large areas from any kind of garbage, water, non-flammable liquids, oils, sticky fractions, metal shavings and scale, any non-explosive fine dust. The vacuum cleaner is equipped with 2 turbines of 1500 W each and a unique 2-stage vortex filtration system and an additional third stage & ndash; an air filter that completely collects dust with a particle size of more than 15 microns. Equipped with a turbine overheating protection system. The vacuum cleaner has 2 cyclone tanks with a volume of 40 liters, which allows you to collect a large amount of dirt. The vacuum cleaner is mounted on an agile and compact frame with 4 wheels - large and small. Small swivel wheels are equipped with stoppers. It can be additionally equipped with a hanging nozzle (brush) 60 cm long.Technical characteristics: Electric power: 3.0 kW Power supply voltage: 220 V Suction power: 1050 aerowatt Maximum discharge: 30 kPa Maximum air consumption of turbines: 385 m3 / hour Actual air consumption at the inlet to the vacuum cleaner: 360 m3 / hour Average time to failure of turbines (replacement of electric brushes): not less than 500 hours Noise level: not more than 65 dB Air purification efficiency of turbines: 99.9% Operating mode: continuous, round the clock Body: steel Coating: polymer, powder painting Length: 650 mm Width: 600 mm Height: 1380 mm Weight: 44.8 kg Diameter of the body (cyclone): 400 mm Volume of the waste collection tank: 40 l Inner diameter of the hose: 51 mm Link to the video about the device and characteristics of the industrial vacuum cleaner Dastprom PP-401 (402 / 3000-2F): Cleaning liquid contaminants with a vacuum cleaner Dastprom PP-401 (402 / 3000-2F):

Vibrating sieve for separating into fractions of metal powder for 3D printing. KB Intel is engaged in the individual development of vibration equipment of non-standard sizes. You can fill out a questionnaire for the development of a technical and commercial proposal for a vibrating sieve for your specific technological task, or send us a sample of your material for test sieving on our equipment. The company's specialists will select the best option for you, based on the properties of the described / obtained material. (Questionnaire in attachment is attached) Manufacturing and delivery of screening equipment takes 2 months. At the same time, a team of specialists provides installation, commissioning of equipment and training of personnel. A 1 year warranty is also provided from the date of commissioning. Repair and modernization is carried out in accordance with the specification agreement on the provision of equipment repair services. Prices for each product are calculated individually, based on the diameter of the screening surface, the number of motors, brand n / steel, number of decks, standard or high-frequency, presence and design of sieve assemblies and other necessary components.

vacuum forming illig rdkp 54 perfect condition

Original electric shoe dryer ES 12/220 "Comfort" model. The appliance uses a self-stabilizing ceramic heating element to maintain a constant temperature during drying. Volumetric air flow creates the most comfortable environment for drying shoes. Time of continuous operation of the device - up to 8 hours. Power - 12 W., weight 250 g.

The machine is designed to mechanize the process of glazing confectionery products with chocolate glaze at food industry enterprises. The machine allows you to apply glaze of various coating thicknesses. The machine is equipped with a glaze bowl with a capacity of 50 kg with a stirrer for mixing the glaze (heating the bowl with Electro-heating elements), a glaze diffuser with adjustable glaze layer thickness. Glazing technology provides a uniform glaze layer, a glossy appearance, and long shelf life. Having our own service center and competent specialists will allow us to ensure reliable operation of your equipment during the warranty and post-warranty periods. Low prices, short delivery times. We are manufacturers of this equipment and are ready to offer VERY ATTRACTIVE PRICES !!! To fix the price, ask for a commercial offer.

COAGULANT ECO MATRIX 200 ML Coagulant Eco Matrix is ​​designed to neutralize harmful substances of various natures in low-quality water. Actual personal protective equipment - will help SURVIVE in conditions of complete uncertainty , and KEEP HEALTH in a hike, field camp, far from civilization, in regions with a dangerous ecological and epidemiological situation. Eco matrix is ​​used for: NEUTRALIZATION of harmful impurities in water under any conditions and circumstances by coagulation - "sticking" of impurity particles with a coagulant formula; FIRST first aid: in case of poisoning, for treating wounds (including gunshot wounds), burns, for blood coagulation and stopping superficial bleeding, instead of iodine, green ki, hydrogen peroxide, activated carbon; for treating the feet in case of fungal infections, for treating and relieving itching from mosquito and insect bites; for rinsing and compresses for inflammatory and colds; For BODY HYGIENE with active sweating, instead of deodorant and prevention of fungal infections. The volume of the Eco Matrix 200 ml will help cleanse from 100 l (from an open reservoir) to 200 liters of (conditionally drinking) source water. A plastic flask of an anatomical flat shape is convenient for any pocket of clothing, the 5 ml cap is equipped with a drip-jet dispenser. The Eco matrix volume of 10 ml will clear 5 liters of water from an open reservoir (in a ratio of 2 ml per 1 liter) up to 10 l conditionally drinkable (in a ratio of 1 ml per 1 l). The plastic bottle is equipped with a 2.5 ml cap with a drop-jet dispenser. Compact and very convenient in an individual first-aid kit. Consultations with the Company's doctor by phone: +38 097 863 86 36 More:

Coagulant Hyacinth 330 ml, water purification at home A topical modern remedy will help you purify conditionally drinking water AT HOME or AT DACHE: with old pipes and poor water supply; in the absence of central water supply (imported water, old wells, nearby drains of livestock farms that pollute the soil); in case of a destroyed water supply system during floods, fires and other force majeure circumstances. Coagulant RELEASES poor-quality water from harmful impurities: suspended and sedimentary rocks, mineral and organic, protein substances, chlorine and organochlorine, surfactants, algae, including blue-green (binding oxygen in water and provoking the death of fish and other living creatures). IMPORTANT! If the water is chlorinated, use a coagulant without fail! It neutralizes organochlorine, which, when water is heated, forms an invisible poison dioxin that affects a living cell. What is a coagulant Hyacinth: is analogue of natural clay, a product of ecological synthesis for purification or post-purification of drinking water; branded PET-bottle 0.33 l will purify up to 300 l of water from any source; 20 ml sample will provide 10-20 liters of water, very convenient on business trips and field conditions How does it work? A coagulant (solution of an inorganic polymer), getting into water, selectively reacts to the presence of harmful substances (organic, inorganic, biological) and precipitates them by "sticking" impurities with the formula. The precipitate can be upper, if the impurities are light (gaseous, surfactants), and / or lower, if the impurities are heavy (salts of heavy metals, radionuclide residues). At the same time, useful substances are retained in the water. HOW to use: Add Hyacinth to the source water at the rate of 1 ml per 1 liter of conditioned drinking water or 2 ml per 1 liter for open water. Stir vigorously and leave to stand for 4-8 hours. The coagulation process is a completely natural mechanism that requires time exposure. It is convenient to prepare water for the night, it is very convenient - you are asleep, and the process goes on! When a separate layer with impurities forms, you just have to drain the clean water and use it as intended. For convenience to separate water from sediment with impurities, we recommend using containers with a tap to drain clean water. More:

The IDK-1 manual circular cutter has a 600 mm clamping recess and a 200 mm jaw Reliable rigid construction Suitable for work on open construction sites Rollers made of high quality tool steel Stop for centering the workpiece before cutting Characteristics type of drive Manual Metal thickness (400 N / mm2), mm 1.0 Diameter range, mm up to 1000 Length mm 1200 Width, mm 200 Height, mm 350 Weight, kg 45

Multifunctional welding carriage HIT-18-1SD-2 for fillet welding. Suitable for welding T-shaped steel sections, H-shaped steel sections, plates, etc. Used in steel structure manufacturing, shipbuilding, bridge building, automobile manufacturing, power engineering, etc. This welding carriage enables intermittent welding. The length of the spacing between welds is precisely adjustable. This model will meet technical requirements, reduce deformation of the workpiece and reduce material consumption. Applicable material is carbon steel, applicable wall thickness is 4-16mm. The carriage is designed for horizontal fillet welding. It is used for welding products with a minimum radius of curvature R ≥ 500 mm. The maximum height of the angular rise during the welding process is 8 mm. Uses a welding power source for gas shielded arc welding. Benefits: The welding power source can operate in 2/4 cycle mode. The automatic welding carriage allows you to set the start / stop times. All parameters are provided with LED indicators and the ability to fine-tune Suitable for horizontal fillet welding. The welding torch is located at the extreme point of the carriage, thus preventing the accumulation of heat and reducing the electromagnetic field when the torch reaches the center of the work piece Dust-proof internal drive system, anti-magnetic design, long carriage life A gear train is used. Prevents play compared to chain drive It is used for welding circular seams with a diameter ≥ 1000 mm Intermittent welding possible Characteristics HIT-18-1SD-2 Supply voltage 220/24 V Power consumption 25 watts Travel speed 0-900 mm / min Burner adjustment up down 55 mm left / right 65 mm angle 360 degrees Weight 10.3 kg Dimensions, LxWxH 380х215х350 mm

Desktop vertical drilling machine 2N125L is designed for drilling, reaming, countersinking and countersinking holes. The design provides a standard Morse taper 3 for tool mounting. The drilling depth is limited by the movement of the spindle axis, but in some cases it can be increased by moving the quill. The control is carried out in manual mode and allows using various materials (metal, wood, plastic, etc.) as blanks. It is widely used in one-off and small-scale production. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Precision quick-change chuck included: radial runout of the clamped tool less than 0.080 mm Adjustable drilling depth stop Right / left direction of spindle rotation Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient electric motor with aluminum housing and forced cooling Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 550 watts Max. Drilling Ø 25 mm Max. Deep hole drilling 18 mm Spindle MK 3 Spindle axis overhang 190 mm Moving the quill 80 mm Spindle speed 210 - 2220 rpm Number of speeds 12 Table size 270 x 270 mm T-slot size 15 mm Maximum distance from spindle to table 780 mm Base size 500 x 300 mm Maximum distance from spindle to base 1220 mm Column diameter ø 70 mm dimensions 690 x 390 x 1570 mm Machine weight 60 Kg

Desktop vertical drilling machine 2N116L is designed for drilling, reaming, countersinking and countersinking holes. The design provides a standard Morse taper 2 for fastening the tool. The drilling depth is limited by the movement of the spindle axis, but in some cases it can be increased by moving the quill. The control is carried out in manual mode and allows using various materials (metal, wood, plastic, etc.) as blanks. It is widely used in one-off and small-scale production. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Precision quick-change chuck included: radial runout of the clamped tool less than 0.080 mm Adjustable drilling depth stop Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient electric motor with aluminum housing and forced cooling Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 450 watts Max. Drilling Ø 16 mm Max. Deep hole drilling 15 mm Spindle MK 2 Spindle axis overhang 125 mm Moving the quill 65 mm Spindle speed 660 - 2500 rpm Number of speeds five Table size 200 x 200 mm T-slot size 14 mm Maximum distance from spindle to table 390 mm Base size 160 x 170 mm Maximum distance from spindle to base 525 mm Column diameter ø 60 mm dimensions 510 x 270 x 820 mm Machine weight 36 kg

Desktop vertical drilling machine 2N114L is designed for drilling, reaming, countersinking and countersinking holes. The drilling depth is limited by the movement of the spindle axis, but in some cases it can be increased by moving the quill. The control is carried out in manual mode and allows using various materials (metal, wood, plastic, etc.) as blanks. It is widely used in one-off and small-scale production. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Precision quick-change chuck included: radial runout of the clamped tool less than 0.080 mm Adjustable drilling depth stop Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient electric motor with aluminum housing and forced cooling Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 350 watts Max. Drilling Ø 14 mm Max. Deep hole drilling 12 mm Spindle B16 Spindle axis overhang 104 mm Moving the quill 50 mm Spindle speed 520 - 2620 rpm Number of speeds five Table size 160 x 160 mm T-slot size 14 mm Maximum distance from spindle to table 330 mm Base size 140 x 180 mm Maximum distance from spindle to base 440 mm Column diameter ø 46 mm dimensions 420 x 230 x 700 mm Machine weight 21 kg

Vertical drilling machines belong to the second group of metal-cutting machines. The main components are: base plate, bed, table, motor, gearbox, spindle and feed mechanism. The ability to perform the following operations: Drilling (through, blind) Boring (countersinking, reaming) Threading Countersinking They are widely used in all branches of mechanical engineering from single piece to mass production. Versatility of the processed material: metal, wood, plastic, etc. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Drill chuck included Adjustable drilling depth stop Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient forced-cooled electric motor Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 300 watts Max. Drilling Ø 13 mm Max. Deep hole drilling 11 mm Spindle B16 Spindle axis overhang 104 mm Moving the quill 50 mm Spindle speed 520 - 2620 rpm Number of speeds five Table size 160 x 160 mm T-slot size 14 mm Maximum distance from spindle to table 240 mm Base size 135 x 175 mm Maximum distance from spindle to base 325 mm Column diameter ø 46 mm dimensions 420 x 220 x 580 mm Machine weight 19 kg

Accumulator battery Delta DTM 6045 Characteristics Dimensions Weight, kg: 0.78 Dimensions: 70x47x107 Dimensions (LxWxH): 70x47x107 Other capacity (Ah): 4.5 voltage (V): 6

Diesel power plant AD20 open on the frame, based on the RICARDO engine is designed to generate electricity as a backup (in some cases the main) power source in settlements, at construction sites , in shift camps, at drilling rigs, in the power systems of enterprises, educational institutions, medicine, in ensuring the functioning of banks, hotels, shopping, warehouse complexes, etc. All components are quality controlled using high-tech equipment. Full control of the production process and final quality control of products is provided by industry experts in accordance with Russian standards. All power plants are fully ready for operation after commissioning, complete with a silencer, battery, filled with oil and coolant. Each 20 kW diesel power plant manufactured by MOTOR has undergone a 2-hour run-in under conditions as close as possible to real operation. Compliance with standards: 20 kW power plant has a certificate of conformity: conformity with GOST R 53174-2008, GOST R 51318.12-99 (CISPR 12-97), GOST 12.1. 012-2004, GOST 12.1.003-83 Basic configuration (for a 20 kW generator the price is calculated based on the basic configuration) : < / strong> 1) Complete diesel engine ( RICARDO ), equipped with direct fuel injection, water-air cooling and speed governor; 2) Generator 20 kW ( 20 kW alternator ) single-support brushless, synchronous, four-pole with feedback diodes, with self-excitation and automatic voltage regulator; 3) Frame with installed fuel tank. The fuel tank is equipped with a drain cock and a lockable fuel filler neck. The structure of the frame allows for rigging work with a car-loader, manipulator, or using a crane-beam; 4) Power supply system with batteries, generator, starting starter; 5) Control cabinet with automatic or manual start (depending on the degree automation); Additional equipment (affects the 20 kW power plant cost ) : - Electric preheater of coolant from the 220 V mains - Electric pre-heater for oil from the 220 V mains - Pre-starting diesel heater of cooling liquid PZhD, - External fuel tank - Execution on a one- or two-axle trailer or on a car chassis, - Execution in the insulated block-container "North", with the complete set of the block-container with equipment and systems necessary to ensure the safety, operation and maintenance of the diesel generator set (the complete set and execution of the block-container is agreed upon additionally),

The VersaUV LEF printer applies text, photographs, logos and other subjects by direct printing onto objects up to 10 cm thick: gadgets, gift items, prototypes, industrial blanks, electronic devices. The LEF printer will quickly transform familiar objects into unique, personalized products - at a favorable cost price. The range of compatible materials is almost endless: PET, ABS, polycarbonate, TPU, leather, textiles, etc. ECO-UV ink ECO-UV ink provides high print density with a wide color gamut. The composition dries instantly, forming a flexible paint film that does not crack when the material is bent and stretched. Delivery form - 220 ml cartridges: CMYK + white + glossy varnish. Roland DG recommends an air filtration system for this ink. Basic and Industrial Models The LEF-20 industrial printer is larger and faster than the LEF-12. The printable area for it is 508 x 308 mm, which is double that of the base model. The new LED moving source further improves printer productivity: print speeds for CMYK, white and transparent inks are significantly faster. Special colors The LEF series printers work with CMYK inks as well as white and transparent formulations. White ink provides high quality prints on colored and transparent objects. It can be used as an opaque opaque base that enhances the brightness of other colors. Clear ink designed for matte, glossy and embossed effects. Simplicity and energy efficiency The LEF printer is simple from operation, does not require heating or cooling between orders. The built-in LED source features an extremely long service life with low power consumption. A protective cover and screen prevent dust from entering the product during printing.

Use the VersaUV LEF-12 to print text, photographs, logos, or other design projects directly onto objects up to 10 cm thick. Examples of such objects are gadgets, merchandise, and prototypes. The LEF-12 is a desktop UV printer that uses CMYK color profile, white ink and varnish. Use varnish for a glossy or matte finish and for textures. Built-in LED lamps ensure fast ink drying. Personalize items LEF-12 is a LED UV printer that prints on objects with a maximum height of 10 cm. The machine is equipped with a flat table , on which you can place the printed materials using a special frame and an adhesive sheet. The table automatically adjusts to the height of the subject, allowing you to print on uneven objects. Instant dry ink The LEF-12 printer uses Roland DG's Eco-UV ink. The ink is available in four colors: CMYK, white and varnish. White ink provides superior printing on colored and transparent objects. You can also use this ink as a base for vibrant colors. Transparent ink allows for special effects including matte or glossy surfaces and textures. Software included LEF-12 printer comes with Versa Works, RIP software from Roland DG. The software supports two printing modes. Standard print mode is ideal for printing fine details. The remote mode has been specially designed for printing on embossed objects.

Environmentally friendly Environmentally friendly emitting LEDs with long lifespan and low energy consumption Environmentally friendly printing that produces almost no organic vapor A2 size and thickness 150mm Width 610mm Printable on A2 materials Large width increases print speed by 1.3 times Maximum material thickness 150mm High print quality < br> 50% improved print accuracy Minimum drop size 4 pkL Maximum print resolution 1800 x 1800 dpi Stunning and accurate image quality Easy maintenance Multiple maintenance systems Clogged Nozzle Replacement System White Ink Circulation System Ink Mist Absorbing Fan Improved Print Quality Reduced Ink Mist, which will be generated when printing on bulky workpieces Simultaneous Printing in 2 layers Not available print using 6-color scheme Reverse printing Print CMYK on White or White on CMYK without loss of speed Available with ink configuration 4 colors + white

Mimaki has developed an updated version of the UJF-3042MkII UV printer with higher productivity, higher accuracy and improved print quality to meet the needs of the dynamic advertising market worldwide. The new line of printers boasts 20 % increased print speed, increased maximum thickness (height) of printed products (up to 153 mm), improved print quality using variable drop technology.

The UJF-3042FX provides an opportunity to enter new promising markets with a large volume of proposals. Compact design saves space. Low cost (UV LEDs can be included in the annual service). Easy installation and operation Printer power supply - 220 V (1.5 A) Printheads with variable drop technology, allow you to get excellent quality images with a maximum resolution of 1440x1200 dpi. Maximum print size 300 x 420 mm. Maximum material thickness up to 50 mm (UJF-3042FX). Print on more materials, including heat-sensitive materials. High productivity / fast installation; no time for ink drying, instant on and off the printer. Low power consumption (less than 0.5 kW). Long life of UV LEDs (5 times longer than conventional UV lamps) White ink for printing on transparent or colored surfaces Varnish for the final gloss. Vacuum system for fixing the material

GCC launches solid state fiber laser engraving machines with flatbed laser engraving machines. The engraving machine represents a fundamentally new type of engraving equipment, which is designed for marking metal products such as stainless steel, copper, aluminum, titanium, zinc, iron, and silver. The original idea led to the creation of a laser complex that surpasses traditional markers on scanning optics. The productivity of such lasers increases several times in the manufacture of large batches of products. New professional equipment is replacing solid-state lasers on scanners with a small working field. The S290 solid-state laser engraver is based on the well-known Spirit model, and combines the quality and reliability of mechanics and electronics, combined with the latest emitter based on a solid-state ytterbium fiber laser. Thanks to this emitter, laser machines allow you to make color engraving on stainless steel. A large working area makes it possible to install a batch of products, which allows you to significantly increase the productivity of the machine, by reducing the time that is spent on installing each product.

Stellar Mark IF series is a new laser marker from GCC based on ultra-durable fiber laser emitter SPI Lasers (UK). Designed for surface marking, deep engraving and even cutting metals and alloys up to 0.5mm thick. Thanks to the fine adjustment of the power, it is possible to color-code stainless steel. The Stellar Mark IF-20 is a compact desktop laser system that provides reliable, trouble-free operation with virtually no maintenance. The undoubted advantage of this laser complex is the low power consumption of the installation. The new type of laser source will make it possible to do without water cooling, which will significantly save the enterprise. The complex is controlled from the graphic package G-Soft Library. Here you can not only send files for execution by setting laser marker parameters, it is also a full-fledged vector editor, similar to CorelDraw. You can work with lines, regular and graphic text, objects, fill and so on. You can scale objects, move them, copy and combine. Additional programs are built in here, such as sequential numbering, barcode and barcode. In a word, there is everything you need here, whether it is an advertising and production or a souvenir workshop, or it will be an industrial enterprise with its own range of specific tasks. A wide range of metals and alloys can be processed, including steel, titanium, silver, gold, brass, copper, aluminum, painted metals, anodized aluminum, Alumamark, plastics, rubber, semiconductors, silicon wafers, some types of precious and ornamental stones, security films for Tesa and 3M lasers. The laser marker can successfully work in such areas as: Jewelry Engraving of advertising and souvenir products Engraving mobile phones and accessories Marking of tools, bearings, machine parts, mechanisms Automotive industry - security markings, dashboard decoration, marking of car parts Labeling of medical instruments and devices Labeling of microcircuits, processors, printed circuit boards, parts, manufacturing of warranty stickers

The device allows engraving on the outside of an object with its rotation 360 degrees around its axis. In the control driver, it is enough to specify the diameter and offset from the edge of the object. Convenient and fast fastening of the object of rotation in the clamp. Rubber gaskets allow working with glass and ceramics. Maximum object diameter 170 mm, length 450 mm. Weight limit 7 kg.

A convenient device designed for high-quality through-cutting of sheet materials: double-layer plastics, acrylic, paper, and other sheet materials. The table is made of molded aluminum foil. Since aluminum is highly reflective, the laser beam is reflected and deflected when it hits it. When processing, the material, being on such a table, is, as it were, in the air, the materials are perfectly cut and do not burn from below. The table is not suitable for cutting small parts.

Experience the power of the GCC LaserPro X Series, designed and engineered specifically for professional use. Thanks to quality equipment and high wear resistance, the GCC LaserPro X500III achieves high productivity. Model X500III combines the functions of both a laser cutter and an engraver. Professional cutting laser complex GCC with a working field of 1300 x 916 mm, made on the basis of the Gaia model, equipped with a glass laser emitter Reci 80, 100,130 or 150W, or 100W water-cooled GSI emitter. Inexpensive and reliable complex for laser cutting acrylic, plastic, plywood, wood, leather, paper and rubber.

The new cutting laser complex GCC with a working field of 635x458 mm, made on the basis of the Mercury model, is equipped with a Reci 80 and 100 W glass laser emitter with water cooling. Inexpensive and reliable complex for laser cutting of acrylic, plastic, wood, leather, paper and rubber. X252 is a medium format laser cutter suitable for processing both small and medium format products, while simultaneously achieving high productivity ... Ideal for simple laser cutting tasks. It should be noted that power, size of the working area and speed only affect productivity, while the cut quality remains consistently high.

A new generation of Spirit laser engraver, which has become the best-selling machine in Russia and in the world. Spirit LS not only retained all the best technical solutions that were used on the previous model, but also received the latest mechanical system and safety key. This model is the embodiment of quality, reliability and technical progress. The latest generation Spirit LS laser system continues the most successful Spirit series of laser engravers. The machine has a number of unique technical solutions, patented technologies and differs from all existing laser engravers. High-precision linear guides with a closed plain bearing allow engraving at speeds up to 2 m / s, while the engraving quality is even higher than on machines with a classical mechanical system, in which a carriage with rollers moves along a rail. The system is protected from dust and combustion products entering it, which significantly extends its service life. The security key will prevent you from using the machine without your knowledge. The working area of ​​740x460 mm makes this machine ideal for cutting and engraving. Spirit LS is the epitome of quality, reliability and the best interface available today. It's safe to say - Spirit LS sets new quality standards in modern laser engraving.

Самая продаваемая, на сегодняшний день, лазерная машина в России. Модель является оптимальной, и наиболее эффективной для резки и гравировки различных материалов. Улучшенный эргономичный дизайн, удобство в эксплуатации и техническом обслуживании машины, надежность и высокая производительность – все эти качества делают Spirit лидером продаж на Российском рынке лазерных граверов.Лазерная гравировальная машина Spirit является самой успешной разработкой компании GCC за последнее десятилетие. Машина за 2 года стала самой продаваемой в мире в своем классе. Революционные решения в дизайне сделали этот станок не только эстетически красивым, но и функционально удобным. Станок также имеет целый ряд инновационных технологических решений, которые позволяют сделать работу более простой, удобной и производительной. Такие решения, как съемный датчик автофокусировки, который способен предотвратить ошибку оператора, откидывающаяся верхняя крышка, позволяющая провести техническое обслуживание быстро и удобно за счет доступа ко всем механическим и оптическим элементам на рабочем столе, возможность перемещения каретки руками, отсек под рабочим столом, в который можно поместить компрессор, подсветка рабочего поля светодиодными линейками и многое другое. Все эти технологии не применялись ранее на других лазерных граверах и запатентованы компанией GCC. За счет оптимального рабочего поля 740x460 мм лазерный гравер Spirit является универсальным как для резки, так и для гравировки.

The Mercury series of laser engravers has been sold on the market for over 10 years and is the most common laser machine in Russia. The Mercury III is an updated version of this series. The machine implements new topical solutions related to safety and access to equipment. The security key will protect the engraver from unwanted use and thus prevent unauthorized access to the machine. The emergency button will help the operator of the laser machine to interrupt the operation of the machine in an emergency. Mercury III is an easy-to-use multifunctional laser system that successfully operates in many advertising, souvenir and printing companies in our country, in industries that produce seals and stamps. A versatile working field (640x460 mm), a reliable laser emitter, and optimal cutting and engraving characteristics position the Mercury III as an ideal tool for a wide range of tasks.

C180II is a continuation of the popular series of desktop laser engravers. The working field 458x305 mm in combination with the engraving speed of 1 m / s and the possibility of expanding the depth of movement (increasing the distance along the z-coordinate) from 100 to 150 mm allows the most effective engraving of various range of products. This is a versatile laser engraver designed for small industries for the production of seals and stamps, model, advertising and souvenir workshops. Small dimensions allow installing the machine in small rooms. Ideal for points of sale, quick engraving of products. Possibility to install an engraving device on cylindrical objects, allowing you to get all the benefits of large floor-standing laser systems.

LaserPro Venus II is a desktop laser engraver, which today is considered to be the most compact and inexpensive in the professional series of GCC's Synrad metal emitter laser engravers. The equipment is ideal for use in stamp workshops that make stamps and seals. It is also suitable for installation in small advertising and production companies that are engaged in the engraving of souvenir products (pens, key rings, business card holders, number plates, plates, badges, etc.) It should be noted that the power, size of the working area and speed affects only productivity ... At the same time, the quality of engraving and cutting remains invariably high.

Reducing sleeves for planetary gear inner coupling. Allows the planetary gearbox to be installed on motors with different shaft diameters.

Industrial connectors with locking (cable mounting) are intended for use in CNC machines and automation systems, including for connecting spindles and servo motors. The connectors provide reliable electrical connections. The connectors are mechanically locked to prevent disconnection.

The PLZ026 module is designed to adjust the power (~ 220V, up to 2 kW) in the load. Two methods of power adjustment - FIM or skipping periods. Designed to adjust power both in resistive loads (heating elements, incandescent lamp) and reactive loads (electric motors). A simistor is used as a control element. Voltage control 0 ... 10V, built-in potentiometer or PWM. Galvanic isolation of control circuits.

Characteristic \ Model 3204/06/08HA 3204 / 06FA Print width up to 3.2 meters < tr> Resolution up to 720 dpi Printhead type Seiko SPT 510 / 35pl (IRH1513D), Seiko SPT 510 / 50pl (IRH1513U) Seiko SPT 1020 / 35pl (IRH2526Q or IRH2536Q) Number of heads 4/6 8 4/6 Ink Configuration CMYK - CMYKLcLm Ink solvent Print speed in modes Draft 2 pass 360 dpi - 52 m 2 / h 2 pass 360 dpi - 104 m 2 / h 1 pass 240 dpi - 104 m 2 / h < / tr> High Speed ​​ 3 pass 360 dpi - 34 m 2 / h 3 pass 360 dpi - 68 m 2 / h 2 pass 240 dpi - 86 m 2 / h Standard 4 pass 360 dpi - 26 m 2 / h 4 pass 360 dpi - 52 m 2 / h 3 pass 240 dpi - 53 m 2 / h < / td> High quality 6 pass 360 dpi - 17 m 2 / h 6 pass 360 dpi - 34 m 2 / h 4 pass 240 dpi - 43 m 2 / h Specifications RIP Tool UltraPrint (PhotoPrint is optional) Control workstation - PC PC operating system Windows 7/8, 32 & 64 bit < / tr> Interface USB 2.0 Materials for printing paper, banner, film and other surfaces prepared for solvent printing Printhead cleaning automatic separate (for each color channel) Material warming up system three-zone four-zone Print Drying System blower fan blower fan, infrared heating Power supply 50/60 Hz, 220 ± 5% V, ≥3000 VA Operating conditions Temperature 18 - 25 C o Humidity 40-70% non-condensing Dimensions Package dimensions 4.50 x 0.90 x 0.80 m Equipment dimensions 4.40 x 0.80 x 1.2 0 m Gross / net weight 450/340 kg Basic equipment: Automatic channel-by-channel system head cleaning. Automatic unwinding-feeding system. Three-zone material warming up system. Fan system for blowing the print. Vacuum media pressure. RIP UltraPrint software. Automatic system for one-channel head cleaning. Automatic material unwinding and feeding system. Four-zone material heating system (additional 4th heating table). Infrared heating system and fan blowing of the print. < li> Vacuum hold-down of the media. Rubberized media support / feed rollers. LED illumination of the print area. RIP UltraPrint software. < / ol> Additional equipment: Additional fourth material warming table. Infrared heating and fan blowing system. Automatic material take-up and take-up system. Rubberized support / feed rollers. LED printing area. RIP PhotoPrint software. Automatic system material receiving-rewinding. RIP PhotoPrint software. < / td>

This is a modern device that allows you to quickly and efficiently apply powder paint. One of the key advantages of the model is the presence of a display that allows you to set the operating parameters as accurately as possible. A spray gun, a control unit, a transport trolley, a 40 liter tank, an injector, an oil moisture separator and a set of hoses are supplied with the device. the tank is made of high quality stainless steel; the unit is connected to a standard household network with a voltage of 220 V (+/- 10%) and a frequency of 50 Hz; Atlas-19 consumes no more than 30 W; the voltage at the corona electrode fluctuates within 10–100 kV, depending on the set parameters; the feed hopper holds 40 liters of powder; minimum inlet air pressure - 0.4 Mda; air consumption - 13 200 l / h; maximum inlet air pressure - 0.8 Mda; the mass of the fully assembled device does not exceed 40 kilograms; consumption powder - 265 g / min; the compressed air contains no more than 1.4 g / m3 of moisture, no more than 0.1 ppm of oil; the dyeing speed reaches 600 g / min; average inlet air pressure - 0.6 Mda; short-circuit current - 180 μA .

Main characteristics: Brand: GP Model: AD 30S-T400 Main power: 30 kW / 37.5 kVA Standby power: 33 kW / 41.25 kVA Output voltage: 230 / 400V, 50Hz Fuel tank capacity (open version): 80 l Weight (open): 800 kg Fuel consumption (load 75): 6.8 l / h Fuel tank volume (casing): 80 l Dimensions (open version): 1750x820x1480 mm Dimensions (casing): 2000x1000x1800 mm Weight (casing): 1050 kg Alternator ( alternator): Model: GS GS 30-400 Generator type: three-phase Engine: Brand: Ricardo Model: R4100ZD Country of origin: China Cooling: air Number of cylinders: 4 Speed: 1500 rpm Displacement: 3.61 l Speed ​​governor: mechanical

The flaw detector is designed to detect cracks, porosity, inadmissible thinning and other violations of the continuity of internal and external protective dielectric coatings (paint, powder, film, bitumen and other dielectric coatings up to 1 mm thick) on metal products by applying a pulsed high-voltage voltage and fixing an electric breakdown in places of discontinuity or inadmissible thinning Features: the ability to control coatings with a thickness of 40 microns to 1 mm; completing with specialized rubber electrodes for paint and varnish coatings; digital indication of the voltage on the electrode; high stability of the voltage on the electrode; the ability to adjust the sensitivity; the ability to quickly replace battery; external battery charging; high operational safety due to pulsed operation; a large set of replaceable electrodes for control of products for various purposes; small dimensions and weight; the ability to control coatings on concrete structures ..

The VA47-100 circuit breakers are designed to protect distribution and group circuits with active and inductive loads. They are recommended for use in input distribution devices of household and industrial electrical installations. 80 standard versions for 10 rated currents.