Construction Materials in bulk on Qoovee

The Verolit company offers:   Plaster putty “Verolit GLATT” - 25 kg For the final alignment of plastered and concrete walls and ceilings for painting or wallpapering, filling in bumps and fixing defects on concrete, aerated concrete, stone. * Regular wholesale customers are provided with BONUS PROGRAMS and DISCOUNTS * Delivery in the city of Bishkek. -------------------------------------------------- ------------- DRY CONSTRUCTION MIXES VEROLIT Kyrgyz Republic, 720083, Bishkek, st. Auezova 1/2 Tel .: 0778-42-28-28, 0558-42-28-28 Email: Company "Verolit"

Filling cement "Verolit FINISHING" (On a cement basis) - 25 kg For walls and ceilings in dry and damp areas before painting. * Regular wholesale customers are provided with BONUS PROGRAMS and DISCOUNTS * Delivery in the city of Bishkek. -------------------------------------------------- ------------- DRY CONSTRUCTION MIXES VEROLIT Kyrgyz Republic, 720083, Bishkek, st. Auezova 1/2 Tel .: 0778-42-28-28, 0558-42-28-28 Email:  

The Verolit company offers: Tile adhesive “Verolit S300 Basic” - 25 kg For facing plastered, concrete and brick walls, floors with ceramic tiles, granite, decorative bricks in dry and wet rooms. Inside and outside. * Regular wholesale customers are provided with BONUS PROGRAMS and DISCOUNTS * Delivery in the city of Bishkek. -------------------------------------------------- ------------- DRY CONSTRUCTION MIXES VEROLIT Kyrgyz Republic, 720083, Bishkek, st. Auezova 1/2 Tel .: 0778-42-28-28, 0558-42-28-28 Email: Company "Verolit"

Machine Stretch FilmIt offers the lowest cost and easiest packaging solution in the world in industrial use. It is produced in various pre-stretch values according to your packaging needs to be used in all automatic machines. Standard Automatic Stretch FilmSuper Power Stretch FilmNano Super Power Stretch FilmIt is also produced as jumbo coils.

Handmade yurts: diameter 5 meters-4000 dollars. 6 meters-5000 dollars. 9 meters-7000 dollars.

Climate panels EFFI is a universal system for creating thermal comfort in rooms. In addition to highly efficient heating, ceiling climate panels can also be used for cooling. Climate panels can work all year round, in any season, creating the right comfort at the right time. An important advantage of climate panels is the ability to work with absolutely any heat source: gas or electric boiler, solid fuel system or heat pump, with heating mains. There is no dependence on the price of a particular energy carrier, there is the possibility of choosing the most profitable option. Climatic panels are especially effective in large and high rooms: production halls, warehouses, sports and concert venues, retail and exhibition rooms. Safe climate panels can be used in rooms with a high category of fire and explosion hazard, they are perfect for hospitals, kindergartens and schools.

Installation of devices at the stage of construction of new facilities and during repair work in finished buildings does not require special preparation and is very simple. To begin with, holes 230-240 mm in diameter are drilled in the wall with a slope of 1% to the external facade. Then, system enclosures are inserted into these holes, which are connected to the Twist controller, according to the attached diagram. Now fresh air without energy loss is already a reality!

Ventoxx Champion is a standard ventilation unit with a simple design and medium power ratings. The optimal combination of price and quality makes this model the absolute champion in the number of regular sales for many years. Ventoxx Champion is equipped with a German-made ceramic heat exchanger capable of providing heat recovery efficiency of up to 86%. These performance indicators of the recuperator are confirmed by testing results in an independent laboratory in Germany and are supported by relevant test reports. The Ventoxx Champion recuperator operates at temperatures ranging from -20 ° C to + 50 ° C and can withstand any weather conditions. In total, 11 programs and 3 work speeds are provided. The maximum volume of air that the recuperator is able to pump is 60 m³ / h. The peak power consumption of the device is 4.6 watts. The maximum noise level of the device is only 43 dB.

The Ventoxx Comfort recuperator is completed with: Plastic shell 300 mm - 1; External metal cover - 1; Internal cover - 1; Cartridge with thermal battery and fan - 1; Filter class G3 - 1; Office Twist - 1; Mounting the outer cover; Warranty Card; Instruction Ventoxx Comfort is designed for 17 operating modes and 5 speeds that regulate the different volume of ventilated air depending on the needs of the owner. The recuperator is controlled using the Ventoxx Twist device, which can be installed in the wall in any place convenient for the client. Intuitive controls can simultaneously control the operation of several recuperators (up to four). The relay allows you to select the mode and speed of operation, which are displayed using light diodes. The Ventoxx Comfort model is used both in the construction of new residential buildings and in the reconstruction of secondary housing. This ventilation device can be used in rooms for various purposes. Like the other recuperators in our range, Ventoxx Comfort has a sleek design that blends equally well with any style of interior.

Heat pumps MIDI - designed for heating, hot water and cooling residential and industrial facilities with an area of 300-1500 (cottages, swimming pools, office buildings, hotels, industrial premises, shopping centers). For homes, offices, industrial premises: 300 - 1500 m² Appointment: heating, hot water supply, passive conditioning, active conditioning Power models: 20-46 kW Price: 6 924 - 9 175 € Characteristics: 7 ”touch screen Multilingual control menu High heat carrier temperature 65 ° C Additional heat source control Flexible programmable timer Hot gas heat exchanger Integrated frequency converter Internal temperature sensor Simple installation and maintenance Ability to integrate into the Smart Home system Room cooling Weather-dependent temperature control of the heating system Automatic regulation of class A circulation pumps

Emitters do not heat the air. The generated thermal radiation fills the space under the emitters, heating directly people and objects. This avoids humidity fluctuations in the room, which are dangerous for living things and significantly reduces the risk of sudden temperature changes associated with drafts. Space heating with SUN BEAM gas emitters consists in transferring thermal energy to a specific space, which makes it possible to differentiate a constant temperature inside the same room or to allocate heated and unheated zones in it. Therefore, emitters are often used as one of their forms of heating production, as well as retail premises, warehouses and hangars. Infrared gas radiant heaters also pay off in industrial, sports facilities, industrial premises, etc. SBC Ceramic Gas Infrared Emitters An infrared ceramic gas emitter is a heating device with an open combustion chamber in which a gas-air mixture is burned on the surface of a ceramic tile. The air needed for combustion is taken from the room, and the exhaust from it is taken here, because the room in which the ceramic emitters are installed must be adequately ventilated. Tubular infrared gas emitters SBT Tubular infrared gas emitters are a modern device designed for heating industrial and commercial facilities, as well as warehouses, sports facilities, etc. Tubular radiators SBT can significantly reduce the cost of heating facilities. Tubular emitters allow you to get heat instantly. The outer surface of the pipe is heated to a temperature of + 360 ° C and emits heat using infrared rays, which, thanks to the installed reflector, are sent to the bottom of the room. Thus, we use 100% of the heat that is felt in the lower and therefore used areas of the building. The entire line on the site:

The AIR series of air heat pumps is the optimal solution for areas where there is no possibility to drill wells or it is economically disadvantageous. For houses: 150 - 500 m² Purpose: heating, hot water supply, passive conditioning Power models: 12-45 kW Price: 5 451 - 14 367 € This series of heat pumps is the optimal solution for areas where there is no possibility to drill wells or it is economically unprofitable. The design of the pump consists of two blocks: external and internal. Combining an air heat pump gives you greater freedom and flexibility when designing your ideal heating system. Features of AIK AIR heat pumps: Heat carrier heating up to 55 ° С Weather dependent control High COP value up to 5 High level of equipment protection AIK AIR equipment: Panasonic EVI compressors with steam injection to increase productivity by 5-7% and protect the compressor from overheating Air conditioning module Online-control In more detail:

We would like to share with you the happiness we have added to the product line of environmentally friendly biodegradable superstretch® film. It is just one of the steps we have taken to offer more environmentally friendly products using renewable resources. Manual Stretch Film It can be applied manually or with a dispenser, ensuring that your packaged products remain stationary and safe during transportation and storage. It meets all your packaging needs to protect your products from dust and harmful rays of the sun. Width min.10 cm - max. It is 150 cm. It is also produced as jumbo coils. Machine Stretch Film It offers the lowest cost and easiest packaging solution in the world in industrial use. It is produced in various pre-stretch values according to your packaging needs to be used in all automatic machines. It is also produced in jumbo coils. Standard Automatic Stretch Film Power Stretch Film Super Power Stretch Film Nano Super Power Stretch Film

Disposable Polyethylene tablecloths that can be used at home, workplaces, restaurants, invitation events and many places. They are disposable covers that are practical and hygienic at the same time. Apart from our existing patterns, we produce with your company logo or custom pattern in line with your request.

Professional building polymer glue,   packing - a tube (cartridge) under a construction gun 310 ml .: Appointment: for gluing products from PVC, particleboard, MDF,   polystyrene foam, polyurethane foam, wall panels, cork, wood, cardboard ceramics, glass, metal, gypsum, brick, drywall, decorative stone   to various substrates - concrete, brick, plaster, wood, gypsum board, fiberboard, chipboard, etc. It is used for interior and exterior, at a temperature from -10 0 C to +30 0 C. Colour:   transparent or white Composition: vinyl acetate polymers, functional additives                                          Properties: ·                      initial setting time 15 minutes ·                      setting force 90 kg / m 2 . ·                      waterproof, frost resistant ·                      after drying, the adhesive joint is clear or white             (depending on the item).

Disposable / disposable polyethylene chef's Apron. Hygienic, waterproof. There are 1000 aprons in 1 parcel.

Polyethylene Film is used for packaging, covering or shipping of products in construction, production facilities, furniture and many other sectors. Polyethylene Film perforated is produced as perforated, unprinted or printed in all desired colors.

Ceramic tile (tile) Orient Ceramic. Our factory is the largest manufacturer of ceramic tiles in Tashkent. Updated designs, product quality and low prices will pleasantly surprise you. Hurry to purchase in large quantities

containers made of polyethylene for storing food water, chemical and granular substances

Repair mixture for concrete ICBM 500 Appointment : Dry construction mix MBR 500 is intended for the preparation of building fine-grained concrete (mortar) used for repairing concrete structures, monoling joints, technological holes, sealing cracks in concrete, brick walls, ceilings, etc. Composition :             Dry construction mix MBR 500   is a polymer-mineral fine-grained mixture obtained by intensive mixing of fractionated sand, Portland cement and a complex of modifying additives. Concrete preparation : For the preparation of dry building mix MBR 500   pour into clean fresh water, constantly mixing until a homogeneous mass is obtained using an electric drill with a mixer nozzle or a low-speed forced-action mixer. The amount of water required for the preparation of concrete is determined from the ratio of 0.18-0.19 l per 1 kg of dry construction mixture. Excess water contributes to the formation of cracks. Ready concrete must be used within 15 minutes. Preparation of the working surface (base) : The working surface (base) must be strong, durable, free of dust, dirt, oils, fats, wax, bitumen, paint residues, cement milk, efflorescence. Cracks are broken, old fragile concrete is removed, the released reinforcement is cleaned of rust. The prepared surface is cleaned of dust with compressed air, washed with water or treated with a sandblasting machine. It is necessary to treat with a polymer-mineral primer weak and highly absorbent substrates. Metal parts must be treated with an anti-corrosion solution. Concrete Application : Before applying concrete, the prepared surface is abundantly moistened. The water is allowed to soak and then manually apply concrete with a spatula. It is necessary to reinforce the applied repair layer with large areas of the surface to be repaired, repair of places subject to large bending loads, and a concrete layer thickness of more than 50 mm. Concrete laying is carried out without interruption until complete completion, or by grips. Before applying subsequent layers, it is necessary to moisten the previous layer, i.e. observe the processing method - “wet on wet”. The temperature of the working surface should be at least + 5ºС and not more than 30ºС. At negative temperatures up to -10ºС, the repair mixture MBR500M is used. To prepare the solution, it is necessary to use water at a temperature of at least 15 ° C. Stir the solution until the antifreeze additive is completely dissolved for at least 5 minutes from the moment of adding water. The consumption of dry mix depends on the type of repair. To repair a damaged horizontal surface with a repair layer thickness of 50 mm, 95-110 kg of mixture per 1 sq.m. To close a hole in a concrete wall with a diameter of 30-35 mm and a depth of 10 cm, 150-200 g of mixture is required, to close a crack with a width of 20 mm and a length of 1 m at a depth of 20 mm, 700-750 g of mixture are required. Specifications : Astringent Portland cement Aggregate fractionated sand Placeholder fraction up to 1.0 mm Water retention capacity not less than 9 5 % Maximum thickness in one run 50 mm Water consumption for cooking 0.18-0.19 L per 1 kg of mixture Viability not less than 60 min Work surface temperature For MBR-500 For MBR-500M   from + 5˚С to + 30˚С from -10˚С to + 5˚С Compression strength after 28 days (grade) 500 kgf / m 2 (50 MPa) Peel strength from concrete surface 17.5 kgf / m 2 (1.75 MPa) Frost resistance no less than 400 cycles Water resistant not less than W 10 Safety precautions : Portland cement contained in the mixture, when interacting with water, forms an alkali. Avoid getting ready-made mortar on the skin and mucous membranes. In case of contact, rinse the contact area with clean running water.             Strength chart of ICBM 500M (seven-day strength calculation) No. p / p Hardening temperature, ° С The strength in the samples is 70.7x70.7x70.7 mm when hardening for 1 day 3 days 7 days 14 days 28 days 1 twenty 15.8 22.4 32,7 40.5 51.0 2 -5 3.3 10.0 18.1 20.8 28.5 3 -10 2,4 8.1 14.5 17.8 26.9   The set of strength can vary within the permissible variation of 15%.   Shelf life : Store mortar in a dry place at a relative humidity of 60%, temperature from –50 to +50 ˚С. Shelf life in the manufacturer’s packaging 6 months from the date of manufacture

Repair mixture for concrete   ICBM 400   Appointment : Dry construction mix MBR 400 is intended for the preparation of building fine-grained concrete used for repairing concrete structures, monoling joints, technological holes, filling cracks, etc.   Composition :             Dry construction mix MBR 400   is a polymer-mineral fine-grained mixture obtained by intensive mixing of fractionated sand, Portland cement and a complex of modifying additives.   Concrete preparation : For the preparation of dry building mix MBR 400   poured into clean fresh water, constantly mixing until a homogeneous mass with a wooden spatula, electric drill with mixer nozzle or low-speed forced-action stirrer. Mixing is carried out for at least 5 minutes. The amount of water required for the preparation of concrete is determined from the ratio of 0.2-0.22 L per 1 kg of dry construction mixture (5.5-5.75 L of water per bag of 25 kg of dry construction mixture). The exact amount of water is determined when the consistency required for the work, the plasticity of the building concrete, is achieved. Ready concrete to stand   for 5 minutes to obtain complete homogeneity and then re-mix. Ready concrete must be used within 1 hour.   Preparation of the working surface (base) : The working surface (base) must be strong, durable, free from dust, dirt, oils, fats, wax, bitumen, paint residues. Cracks are broken, old fragile concrete is removed, the released reinforcement is cleaned of rust. The prepared surface is cleaned of dust using compressed air. Weak old concrete or mortar reinforced with polymer-mineral primer Apply a highly absorbent surface to the primer. Metal parts must be treated with an anti-corrosion solution.   Concrete Application : Before applying concrete, the prepared surface is abundantly moistened. Allow the water to soak in and then apply the concrete manually. For large areas of the surface to be repaired, repair of places subject to large bending loads, the layer of applied concrete, the thickness of the concrete layer of more than 50 mm must be reinforced with an alkali-resistant fiberglass mesh, metal reinforcement or fiber. Concrete laying is carried out without interruption until complete completion, or by grips. Before applying subsequent layers, it is necessary to moisten the previous layer, i.e. observe the processing method - “wet on wet”. The temperature of the working surface should be at least + 5ºС and not more than 30ºС. Concrete consumption depends on the type of repair. To repair a damaged horizontal surface of 95-110 kg per 1 sq. M of the surface to be repaired with a layer thickness of 50 mm.   Specifications : Colour Gray Astringent Portland cement Aggregate fractionated sand Placeholder fraction up to 1.0 mm Water retention capacity not less than 98% Maximum thickness in one run 50 mm Water consumption for cooking 0.2-0.22 L per 1 kg of mixture Viability at least 1 hour Hardening time 24 hours Work surface temperature from + 5˚С to + 30˚С Compressive strength (grade) 400 kgf / m 2 (40 MPa) Peel strength from concrete surface 17.5 kgf / m 2 (1.75 MPa) Frost resistance no less than 400 cycles   Safety precautions : Portland cement contained in the mixture, when interacting with water, forms an alkali. Avoid getting ready-made mortar on the skin and mucous membranes. In case of contact, rinse the contact area with clean running water.   Shelf life : Store mortar in a dry place at a relative humidity of 60%, temperature from –50 to +50 ˚С. Shelf life in the manufacturer’s packaging 6 months from the date of manufacture

Repair mixture for concrete   ICBM 300   Appointment : Dry construction mix MBR 300 is intended for the preparation of building fine-grained concrete used for repairing concrete structures, monoling joints, technological holes, sealing cracks, etc.   Composition :             Dry construction mix MBR 300   is a polymer-mineral fine-grained mixture obtained by intensive mixing of fractionated sand, Portland cement and a complex of modifying additives.   Concrete preparation : For the preparation of dry building mix MBR 300   poured into clean fresh water, constantly mixing until a homogeneous mass with a wooden spatula, electric drill with mixer nozzle or low-speed forced-action stirrer. Mixing is carried out for at least 5 minutes. The amount of water required for the preparation of concrete is determined from the ratio of 0.2-0.22 L per 1 kg of dry construction mixture (5.5-5.75 L of water per bag of 25 kg of dry construction mixture). The exact amount of water is determined when the consistency required for the work, the plasticity of the building concrete, is achieved. Ready concrete to stand   for 5 minutes to obtain complete homogeneity and then re-mix. Ready concrete must be used within 1 hour.   Preparation of the working surface (base) : The working surface (base) must be strong, durable, free from dust, dirt, oils, fats, wax, bitumen, paint residues. Cracks are broken, old fragile concrete is removed, the released reinforcement is cleaned of rust. The prepared surface is cleaned of dust using compressed air. Weak old concrete or mortar reinforced with polymer-mineral primer Apply a highly absorbent surface to the primer. Metal parts must be treated with an anti-corrosion solution.   Concrete Application : Before applying concrete, the prepared surface is abundantly moistened. Allow the water to soak in and then apply the concrete manually. For large areas of the surface to be repaired, repair of places subject to large bending loads, the layer of applied concrete, the thickness of the concrete layer of more than 50 mm must be reinforced with an alkali-resistant fiberglass mesh, metal reinforcement or fiber. Concrete laying is carried out without interruption until complete completion, or by grips. Before applying subsequent layers, it is necessary to moisten the previous layer, i.e. observe the processing method - “wet on wet”. The temperature of the working surface when applying MBR300 should be not less than + 5ºС and not more than 30ºС. The temperature of the working surface when applying MBR300M should be at least -10ºС and not more than + 5ºС. Concrete consumption depends on the type of repair. To repair a damaged horizontal surface of 95-110 kg per 1 sq. M of the surface to be repaired with a layer thickness of 50 mm.   Specifications : Colour Gray Astringent Portland cement Aggregate fractionated sand Placeholder fraction up to 1.0 mm Water retention capacity not less than 98% Maximum thickness in one run 50 mm Water consumption for cooking 0.2-0.22 L per 1 kg of mixture Viability at least 1 hour Hardening time 24 hours Work surface temperature For MBR-300 For MBR-300M   from + 5˚С to + 30˚С from -10˚С to + 5˚С Compressive strength (grade) 300 kgf / m 2 (30 MPa) Peel strength from concrete surface 18 kgf / m 2 (1.8 MPa) Frost resistance no less than 400 cycles   Safety precautions : Portland cement contained in the mixture, when interacting with water, forms an alkali. Avoid getting ready-made mortar on the skin and mucous membranes. In case of contact, rinse the contact area with clean running water.   Shelf life : Store mortar in a dry place at a relative humidity of 60%, temperature from –50 to +50 ˚С. Shelf life in the manufacturer’s packaging 6 months from the date of manufacture

EXW from 26,22 Euros Please, send you requirement to  

Ceramic tile 115.5 * 200mm (Glossy) (MDT-40) Small format tiles.  

Glass mosaic 8 * 23 * 48 * 98 * 297mm (MDS-37) Collection STYLE

Glass mosaic 4 * 10 * 318mm (MDP-01) PREMIUM Collection

Glass mosaic 8 * 23 * 300mm (MDS-22) Collection STYLE

Glass mosaic 4 * 300 * 300mm (MDS-49) Collection STYLE.

Glass mosaic 4 * 20 * 327mm Fantasy collection. MDF-70

Glass mosaic (mix) 4 * 20 * 327mm. Fantasy Collection MDF-04

Ceramic tile 98 * 98mm (TCMBAK-1). MDT-01 (Matte; Gloss).

Acrylic lan confidently gained leadership in the field of facade and interior decoration. In its form, travertine resembles a combination of marble and limestone. Due to its characteristics, travertine will last for many years. In addition to excellent external characteristics, travertine has several advantages. - it is put simply; - dries quickly; - the ability to choose different colors and textures; - resistance to deformation and vibration; - fire resistance; - frost resistance; - maintains temperature differences. You can buy travertine at affordable prices at National Stone.

Crushed quartz and rounded quartz sand are used according to a single principle. Finishing and building materials, glass products, bricks, fixing mixtures are made from them, and they are also in demand in the areas of aquarium, landscape design, water treatment, sandblasting and other works. Crushed quartz is used in various manufacturing processes. The material is obtained by crushing the quartz itself by explosion. Crushed quartz has a transparent structure, high chemical purity, and there are no organic components. In finishing works, this particular type of artificial stone is the most popular. Crushed quartz is a durable and durable material that goes well with other materials. For example, with cement, which allows you to get a durable product. In finishing works, fractional white crushed quartz is in demand. This material allows you to get a textured surface in the interior and on the facade.

Quartz stones - made from modern polymers and natural quartz. Compared with similar materials, this version of artificial stone stands out for its functionality and attractiveness. Benefits: - resistance to high temperatures, retains its properties and attractive appearance in difficult operating conditions; - no need to use special tools in cleaning, even the most difficult contaminants are well rubbed, odors are not absorbed; - environmentally friendly material, there is a certificate of conformity; - polymer layers made quartz slabs flexible, so the material is not afraid of shock and damage. - Antibacterial properties prevent the formation of mold and bacteria. Buy quality quartz stones in Uzbekistan at competitive prices at National Stone.

These extrusion lines are intended for the production of smooth pipes from UPVC, which are used for transporting water in drinking water supply, in agriculture and construction, as protective pipes for cable laying. The lines are equipped with a twin-screw extruder with conical or parallel screws. The equipment has excellent reliability and high performance, meets international quality standards. A comprehensive supply of extrusion lines and everything necessary for the production of additional equipment from one source for complete automation of production. Features and Benefits of UPVC Extrusion Lines A special series of high-performance twin-screw extruders is developed using the latest technology. The extruder is equipped with an automatic thermal control system for heating the cylinder and the extrusion head. Extruder equipped with screw feed loader The main AC motor is SIEMENS. The twin screw extruder and the rest of the line units are equipped   microprocessor technology imported, managing the line. Inverter control on the drives of the extrusion line, characterized by a smooth ride, low noise during operation. Main frequency converter ABB, contactors - SIEMENS A modern, advanced PCL automated control system and a large color monitor make production management easier. SIEMENS control panel menus in Russian The extrusion head is specially designed to work with PVC . For the manufacture of various pipe diameters, it is equipped with a replaceable extrusion tool: dies - for changing the outer diameter of the pipes and mandrels - for changing the wall thickness Each track of the haul device is controlled by a separate engine. Synchronization with the rotations of the extruder shaft for the ideal quality of the pipes obtained The planetary type automatic cutting device works with high precision and low noise. The pipe cut is flat and smooth. The automatic bell-shaped machine of the series is equipped with a pulling device and a software interface, it   can be controlled from a central system or separately. As it expands, the pipe moves carefully without risk of damage. Adopted infrared heating method. 2 furnaces; molding of the size of the bell is very accurate. Expansion technology is very   simple, electrical appliances for control from well-known brands, the production process is stable and reliable. A doorn with a sealing ring put on it is inserted into a pipe heated in a molding chamber in which   creates excessive pressure due to the supply of compressed air. Under the influence of the pressure difference between atmospheric   air and pressure in the molding chamber is the molding and calibration of the bell on the mandrel with the appropriate   o-ring. The heating flange ensures accurate and complete molding of the edges of the bell. At the molding station, in addition to molding the bell, it also cools. Roma               Qingdao Win Win Machinery Co., Ltd

Design and develope any thing in plastic injection and blow molding .