Oil & gas equipment and machinery in bulk on Qoovee

ISTOK-NS pumping stations are produced on the basis of Russian and imported pumps; with Russian pumps - an inexpensive and maintainable option, with SAER pumps - the best option in terms of price-quality ratio, with GRUNDFOS pumps - for the most reliable solutions. As part of pumping stations, pumps from Pedrollo, WILO, Ebara and others can be used. As part of the pumping stations, components are used that have been selected for seven years and have shown themselves to be reliable and affordable. These are pumps from well-known manufacturers (for example SAER IR40-200NB), compact butterfly valves (for example, ADL ZPVS-FL-3-100-MN-E on the discharge pipe and ZPVS-FL-3-125-MN-E on the suction pipe), flanged check valves (for example ADL CV16-100), flat welded flanges according to GOST 12820-80, blind flanges (plugs) according to GOST 12820, tees according to GOST 17376-2001 and bends, steel water and gas pipes according to GOST 3262-75 (primed and painted ), threads, ball and three-way valves for connecting instrumentation and water sampling, pressure gauges, as well as various structural elements that ensure the reliability and compact placement of the pump station units. All pumping stations can be manufactured both on a frame and in a block insulated container with lighting and automatic heating. The container can be ground or recessed. Warranty: 12 months for pumping stations with domestic pumps 24 months for pumping stations with imported pumps

ISTOK control cabinets are low-voltage complete devices ISTOK (NKU ISTOK), which are designed to automate water supply, are installed in wells, water intakes, pumping and sewerage stations, can be equipped with frequency converters, controllers, soft starters. Low-voltage devices ISTOK provide automatic regulation of pumps, maintaining the required technical parameters. Automation of pump control can significantly reduce the cost of introducing new and repairing out-of-order equipment for water supply systems. ISTOK control cabinets are used for frequency regulation of pressure, for pump control in the soft start and stop mode, maintaining the water level within the required limits. This is a complete device consisting of proven and reliable components, mainly imported. The installation can be carried out both indoor and outdoor, energy-saving mode at night, automatic pump change and other functions can be provided.

The impeller pump can be used to pump a wide range of liquids in the chemical, cosmetic, pharmaceutical, dairy, canning, confectionery, oil and fat industries, etc. The impeller pump is designed for pumping thick, liquid masses with a viscosity of up to 20 Pas with permissible inclusion of air and solid particles. Due to the positive displacement principle, the pump can be used as a metering unit. Advantages of the impeller pump: Wide range of applications in various fields Can be used as a dispenser Pumping liquids, emulsions, suspensions containing small particles, such as pieces of berries, while maintaining their structure The flow path is made of high quality stainless steel, and the impeller can be made of both conventional and oil-free materials Fast, simple and inexpensive maintenance High performance in a small footprint

Frequency inverter INNOVERT of the IBD and ISD series is a multifunctional frequency inverter, convenient in operation and settings. Perfect for industrial installations and water supply systems, ventilation and air conditioning systems, conveyor systems, extruders, metal-cutting machines, etc. You can buy an INNOVERT frequency converter by contacting the company's contact phones "Promsitech". Functions: speed regulation set by analog signals, digital network or potentiometer knob on the front panel. 15 preset speeds 4 different options for acceleration and deceleration reversing motor overcurrent, voltage protection temperature control of the transistor module DC braking electronic potentiometer (MOP) PID control mode of technological parameters (pressure, temperature, flow, etc.) PLC speed control mode RS485 port, Modbus protocol

Barcodes, which have been used in retail for decades, can quickly identify a product, find out or change its price. Barcodes, read by a special mobile computer called the Data Acquisition Terminal (DCT), instantly identify the product, no matter where it is - in the shop window, in the back room or in the warehouse. It is not so to identify an item without barcodes and a mobile scanner simple.

Zebra's generation of high-performance ZT400 series printers are built on the proven Z Series platform (well known ZM400 / ZM600 models). The significantly increased print speed and large amount of RAM will allow you to quickly and efficiently perform even serious print volumes. Standard Ethernet 10/100 and Bluetooth 2.1 provide the widest range of connectivity options.

Zebra's updated GK420d is the best desktop printer to date with 104mm print width. Recommended for use in small warehouses, shops, pharmacies, offices, etc., as well as where it is required to print large labels for product labeling with a short (up to a month) shelf life. Features and Capabilities Zebra G-Series Compact Desktop Printers deliver the best print speeds and productivity in their class, printing up to 104mm wide.

The PLX System includes a complete range of single and double walled electrofusion fittings, elbows and combination fittings. Electrofusion bonding is a quick and convenient method for creating a permanent seal. PLX electrofusion fittings are designed for installation during a fixed welding time at an ambient temperature of +5 ° C to +23 ° C. For welding at temperatures below -5 ° C and above + 23 0С correction time factors should be applied. When using manual data entry into an electrofusion machine (ECU), the compensation time must be added / reduced accordingly. Key benefits: UV resistance of the new line. Corrosion resistance Tightness Quick and easy installation by electrofusion welding Dimensional stability Robust Static electricity free Inter-wall monitoring and safety for the environment Maintenance free A complete range of fittings and accessories available.

Avas has over 20 years of experience in the design and manufacture of equipment for gas stations and tank farms. Avas SRT series fuel dispensers have high quality at a low price, proven in many markets around the world. Reliable reading device with 20 years of experience and long life hydraulics. A set of solutions for expanding functions and upgrading on basic models. Possibility of completing with different performance (up to 120l / min). Specifications: Rated fuel consumption: 50, 80 l / min ± 10% < br> Lowest fuel consumption: no more than 5 l / min Minimum dispensing dose: no more than 2 l Pump motor power: 0.75 / 1.1 kW Supply voltage: 380/220 V > Operating temperature range: -40 ~ 50 ℃ Relative air humidity: 20 ~ 95% Relative error: no more than ± 0.25% Communication interface: RS-485 Explosion protection category: 2ExdmIIAT3 MTBF: 12000 h Average service life: 12 years Version: Hydraulic type: Pressure / suction Number of hoses: 2-8 Number of products: 1-4

Nanoguard ACP® DCP is a non-toxic, anti-corrosion pigment that works with all types of paintwork coatings, completely replaces traditional pigments based on heavy metals zinc phosphate, chromates, aluminum tripolyphosphates, mixed phosphates such like ZPA, ZPO. Provides a cost effective solution compared to other anti-corrosion pigments. Easy formulation and replacement of traditional phosphates 1: 1 by weight. CONEG, FDA RoHS compliant, can be used in systems where food / drink contact is required.

The cutting-and-milling scraper SDRF-3-S is intended for dewaxing (scraping) mechanical cleaning of the inner surface of tubing tubing 60, 73 and 89 from asphalt-resin-paraffin deposits (ARPO) in the process of oil production by electric submersible pumps and the fountain method. The RD-2 cutter and the L-1 blades are made of 20X steel or plastic. Characteristics of the SDRF-3-S scraper: Overall length: 1500 - 1900 mm Scrap diameter: 26, 28, 30, 32 mm Cutter diameter: 32 - 68 mm Number of cutters: 3 pcs. Weight: from 14 kg Link to detailed description: Manufacturer: Ecolight-Geotechnika LLC

new gas tank dumak 45m3

The explosion-proof connection is for routing the power supply to the submersible pump. Prevents gasoline and vapors from entering the wiring. Made of high quality metal and plastic.