Industrial Equipments and Machines in bulk on Qoovee
- General-purpose Equipments
- Other equipments and machines
- Anti-magnetic Seals for Measuring Devices
- Elevator equipment
- Machines for printing products
- Automation and Software
- Electrical equipment
- Explosion-proof Equipments
- Filtration Equipment
- Glass Processing Machinery
- Woodworking Machinery
- Hydrophore and expansion tanks
- Indirect Water Heaters
- Industrial Equipment Parts
- Industrial Instruments
- Industrial Painting Machines
- Coffee machines
- Plastic Processing Machinery
- Mechanical Parts
- Furniture Machinery
- Tire Industry Machines
- Welding Equipment and Machines
- Drying equipment
- Vacuum Equipments
- Water heating boilers
- Machine Tool Equipment and Parts
- Storage tanks
- Equipment for cafes and restaurants
- Steam boilers
- Steam generators
- Thermal oil boilers
- Economizers
- Safety & ecology
- Medical equipment
- Oil & gas equipment and machinery
- Video Production Equipment
- Textile machinery
- Amusement park equipment
- Road Construction Machines & Equipments
-
Food & agro machinery, equipment
- Retail Store Equipments
- Industrial Cleaning and Sanitation Machines
- Industrial machinery parts
- Refrigeration Equipments
- Warehouse and handling equipment
- Food Machinery,Equipments
- Food additives and ingredients machines
- Ecologically safe technologies in agro
- Packaging Machines
- Livestock machinery, equipments
- Weighing & control equipment
-
Agriculture Machinery & Equipment
- Agricultural electronics, equipment for measuring
- Automated agro management systems
- Irrigation and Drainage Machines &Equipments
- Tillage Machines
- Fertilizer Application Machines & Equipments
- Harvesting Machines & Equipments
- Greenhouse Equipment
- Hardware & Spare Parts & Supplies
- Beekeeping Equipment
- Loading Machinery
- Fruit & Vegetable Machines & Equipments
- Plant Protection Machines & Equipments
- Seed Sowing Machines & Equipments
- Sorting and Transportation Machines & Equipments
- Tractors
- Livestock Equipments
- Construction Machinery & Equipment
All countries
- All countries
- Australia
- Azerbaijan
- Belarus
- Belgium
- Bulgaria
- China
- Czechia
- Georgia
- Germany
- Hong Kong
- India
- Indonesia
- Iran
- Ireland
- Japan
- Kazakhstan
- Kyrgyzstan
- Latvia
- Lithuania
- Malaysia
- Pakistan
- Poland
- Russia
- Singapore
- South Korea
- Sweden
- Taiwan
- Thailand
- Turkey
- Ukraine
- United Arab Emirates
- United Kingdom
- United States of America
- Uzbekistan
Sort by:
ООО «Энерготех», г.Барнаул
Russia
USD
135.88/pcs
Electronic suspended crane scales K VID (Zh) A "Metal 1" are intended for weighing products. The body is made of aluminum. Liquid crystal indicator, remote control. The Middle plant produces 8 models. Minimum weight 4 kg, maximum 2000 kg. The hook rotates 360 degrees. Products are equipped with rechargeable batteries. Designed for a 220 volt power grid.
ООО «Энерготех», г.Барнаул
Russia
USD
2226.64/pcs
Advantages of the UPK-14PRGK cable rewinding device with RKU:
A technological reel is supplied as standard, which allows winding cables weighing up to 300 kg and centering sleeves.
The receiving stand is equipped with a hydraulic lift for lifting and lowering drums with a cable, which allows the cable to be unwound without the involvement of lifting mechanisms.
The presence of wheel supports allows the operator to easily move the machine around the warehouse.
The presence in the design of the Device for cable rewinding of the cable layer allows to obtain a tighter laying of the rewound material.
The machine is equipped with a SEW-Eurodrive geared motor.
The frequency converter allows you to smoothly change the rewinding speed from 4 to 60 rpm.
Availability of the option to stop when reaching the programmed length
Protection of the electric motor against voltage surges, short circuits, overheating.
The device for cable rewinding UPK-14PRGK with RKU is a middle-class machine with a manual cable-laying machine, designed for winding cable and wire products with a diameter of not more than 30 mm. The device for cable rewinding UPK-14PRGK with RKU is designed to use cable reels from 8 to 14 numbers, as well as up to 14 drum numbers with the use of centering sleeves.
ООО «Энерготех», г.Барнаул
Russia
USD
2626.3/pcs
Cable winding device UPK-25 RFH003 - a new modified heavy-duty machine designed to replace the UPK-25RCH002. The device provides winding of cable and wire products up to 65 mm in diameter on drums with a maximum weight of up to 3 tons. The range of used cable reels is from 10 to 22 sizes. Cable rewinding machine UPK-25 RFH003 is patented. Measuring unit IDM has a patent and a certificate of type approval of measuring instruments
Various modifications of the machine are produced:
With RKU - manual cable layer;
With AKU - automatic cable layer;
C R97 - version with reinforced gearbox;
S IDM - various modifications of the IDM series length meter are possible
Advantages of the Device for cable rewinding on drums UPK-25RCH003:
as an additional set, a technological drum can be supplied, which allows winding a cable weighing up to 300 kg
the presence of a cable-laying machine in the structure of the machine allows obtaining a denser packing When equipped with AKU - an automatic cable-laying device - an even laying of the rewound material is provided without the involvement of an operator.
Smooth start. The frequency converter allows you to smoothly change the rewinding speed from 0 to 30 rpm.
Reversible rotation.
The length meter is reversible.
The presence of the option of a sound signal and automatic stop when the programmed length is reached.
A line choke for voltage stabilization is provided as standard. Protection of the electric motor against voltage surges, short circuits, overheating.
ООО «Энерготех», г.Барнаул
Russia
USD
97.06/pcs
The length meter IDM-20 is designed to measure long materials (cable, wire, cable, rope, etc.) with a diameter of 1 to 20 mm and can be used as an independent measuring instrument or as part of devices for rewinding cable and wire products. Installed on both manual cable rewinding machines and driven machines.
The delivery set of the IDM-20 length meter includes:
measuring device frame
input and output roller block
electronic counter of impulses (sealed) - tachometer ID-2 with a set of sensors.
Advantages of the IDM-20 cable length meter:
reliable welded body has a precise design, made on high-tech equipment with the use of a welding robot;
counter ID-2 has established itself as an extremely reliable device, has a large digital indicator and sound;
reversible counter - for basic configuration;
the ID-2 meter uses original technologies to improve the measurement accuracy;
sensors with overload protection. Cable length meter IDM-20 is patented and has a certificate of type approval of measuring instruments - for the basic set.
ООО «Энерготех», г.Барнаул
Russia
USD
159.86/pcs
DK-5V cable jack. Screw cable jack, lifting capacity 5 tons. For cable unwinding from reels with number 8-22. This jack for cable unwinding from drums uses the screw-nut principle. The axis of the jack is threaded through the central holes of the drum, to exclude the movement of the drum along the axis during rewinding - the cable drum is fixed with clamping shoes (centering cones can be used if necessary), two racks are installed on the sides of the drum, after which the cable drum is lifted by rotating the jack handle ...
ООО «Энерготех», г.Барнаул
Russia
USD
4567.47/pcs
Three-scissor lifting hydraulic tables are designed to lift loads to a sufficiently large height (usually up to 12 m).
Thanks to the three-scissor mechanism, it is possible to provide a significant lifting height with a relatively small lifting platform.
Most often, three-scissor lifting tables are used in warehouse complexes. Also, such lifts are often used in industries where it is necessary to raise and lower large volumes of products and materials from one level to another.
Three-scissor lifts are very common in car dealerships, large garages and parking lots. The weight of the lifted load can be very different: from hundreds of kilograms to ten tons. The height of the lift table when folded is dependent on the lift capacity of the lift, the size of the platform and the lift height.
ООО «Энерготех», г.Барнаул
Russia
USD
456.75/pcs
EST-3 t19 machine for 3 standard blocks with dimensions 390 * 190 * 190. Simple, convenient and reliable in operation, a machine with a powerful vibration motor for 220V, Forming time for 3 blocks (1 cycle) 30-60 seconds, productivity from 50-120 blocks per hour, productivity depends on the supply of raw materials!
Produced blocks with perfect geometry. The machine is suitable for the production of cinder blocks, expanded clay blocks, sand blocks, etc. The walls of the machine die are made of thick-walled metal, the hollow-formers of your choice are rectangular, round or slotted.
There are also machines for 2/3/4/5/6 blocks combined options (2 blocks + 1 half-block), (4 blocks + 2 half-blocks).
Concrete mixers (forced type) for 300l., 500l., 750l., 1000l., Vibrating tables, filling machines, belt conveyors, filling machines, molds for reinforced concrete rings.
ООО «Энерготех», г.Барнаул
Russia
USD
456.75/pcs
EST-3 (2 + 1) t19, t-12 machine for 2 standard blocks 390 * 190 * 190 and 1 half block 390 * 120 * 190. A simple, convenient and reliable machine with a powerful 220V vibration motor, Forming time for 3 blocks (1 cycle) 35-60 seconds, productivity from 50-120 blocks per hour, productivity depends on the supply of raw materials!
Produced blocks with perfect geometry. The machine is suitable for the production of cinder blocks, expanded clay blocks, sand blocks, etc. The walls of the machine die are made of thick-walled metal, the hollow-formers of your choice are rectangular, round or slotted.
There are also machines for 2/3/4/5/6 blocks combined options (2 blocks + 1 half-block), (4 blocks + 2 half-blocks). Concrete mixers (forced type) for 300l., 500l., 750l., 1000l., Vibrating tables, filling machines, belt conveyors, filling machines, molds for reinforced concrete rings.
ООО «Энерготех», г.Барнаул
Russia
USD
5994.81/pcs
Sleigh tanks are used in harsh climatic conditions where it is difficult and almost impossible to deliver fuel or other necessary production fluid. They gained their main popularity in the northern regions, where the main part of the year is harsh climatic conditions. This type of equipment can be transported by a heavy-duty vehicle as well as any type of tractor equipment. Thus, this type of equipment is mobile. And it can be transported on any surface. A big and important factor is that it is unnecessary to prepare sites during transportation. This type of containers on sledges are distinguished by their high resistance during their operation, as well as to wear. The tanks can be equipped with various technical equipment.
ООО «Энерготех», г.Барнаул
Russia
USD
2180.97/pcs
Industrial heat accumulator KATRIN 1000 A with a tank volume of 1000 liters. It is a sealed reservoir that allows work under excessive internal pressure. Tank material: high-alloy carbon (boiler) or high-quality stainless steel. To increase the efficiency of the devices, external thermal insulation up to 100 mm thick is used, made in the form of a removable casing-cover. A modern heat insulator based on synthetic fibers is used, it is effective and safe. The heat accumulator is used as a storage buffer in heating and hot water systems; it does not have its own heaters and heat exchangers. Can be combined with other heat accumulators to form a battery. The main purpose is to reduce energy costs and increase the efficiency of water heaters.
ООО «Энерготех», г.Барнаул
Russia
USD
10.11/pcs
Household gas meter of membrane type NPM (NPM), standard sizes G1.6; G2.5; G4 is used to account for gas consumption (liquefied, natural, cracking gas, hydrocarbon gas composition and other non-aggressive gases) in housing and communal services and everyday life. According to the gas flow, the models are right-handed (supply from right-to-left) and, accordingly, left-handed.
ООО «Энерготех», г.Барнаул
Russia
USD
411.07/pcs
Mobile pressure units of the DSG trademark with various displacement capacities of 25,50,75,100,160,200,250,900 liters are intended for cleaning surfaces from rust, old paint and other deposits, as well as for surface preparation before applying anti-corrosion coatings.
ООО «Энерготех», г.Барнаул
Russia
USD
1027.68/pcs
For installation in workshops and closed rooms, we produce blast cleaning chambers of the KSO® trademark. The basic are injection chambers. On their basis, chambers are produced with a monoblock design, consisting of an abrasive blasting cleaning box and a built-in block of filter elements with an exhaust fan. The KSO camera turns out to be self-sufficient and does not require the connection of any additional nodes. It is convenient to operate and economical to use. Emissions of dust and other harmful substances comply with the MPE standards. Additionally, we can supply pneumatic, air-mechanical separation devices, abrasive material transportation systems - augers, elevators and conveyors of various designs in a set with a chamber.
ООО «Энерготех», г.Барнаул
Russia
USD
10276.82/pcs
Shot blasting lines with high performance automatically clean pipes, rolled metal products, castings, large-sized metal structures from mill scale and rust to a cleanliness class SA 3 before applying various protective coatings. This series of equipment can be divided into 5 main groups: pipe cleaning plants, rolled metal cleaning plants, casting cleaning plants, belt hearth plants, rotary table plants.
ООО «Энерготех», г.Барнаул
Russia
USD
7422.15/pcs
Foundry mini-plant for the production of linear fittings from non-ferrous scrap waste We produce a mini-foundry for the production of power line fittings, self-supporting insulated wire, cable and panel fittings by casting from non-ferrous scrap waste. Delivery set: reflective oven; crucible furnace; chill machine; chill molds (forms of products you need). The furnaces operate on any type of energy: low / high pressure gas, bottled gas (1 cylinder is enough for 15-20 hours of operation), electricity (30 kW / h during acceleration, no more than 15 kW in operating mode), diesel fuel, spent fuel, etc. etc. when installing the appropriate burner (to be discussed separately). Chillers can be: Single-position (open the shape to one side) for products without back corners. Two or more positional ones - opening up / down, etc. with complex forms. Power consumption 2.5 kW / h. This efficiency is achieved by the fact that the oven is turned on only when the mold is opened and closed. Kokili (casting molds) - molds are made on NB the entire series, NKK - the entire range, PA - the entire range, NZ 2-7, hardware clamps, cable fittings, etc. - the list is not limited.
ООО «Энерготех», г.Барнаул
Russia
USD
330.23/pcs
Frying cabinets for catering are offered in one-, two- and three-section versions. They are used for industrial cooking. Made of stainless steel.
ООО «Энерготех», г.Барнаул
Russia
USD
1313.15/pcs
The mini-band sawmill is designed to cut wood of any species, and also to dissolve logs. As a result, you will receive ready-made timber, sleepers, slats, edged and unedged boards, veneer and other sawn timber.
The sawmill works in a horizontal area, lifting is carried out electromechanically. The horizontal mini-sawmill has the following advantages in operation:
High quality lumber, low waste.
Quick installation of the product, setting the required parameters.
High-quality and precise cutting of wood of any degree of hardness.
Does not require a foundation, therefore it is easy to install and move.
ООО «Энерготех», г.Барнаул
Russia
USD
1849.14/pcs
1. The length of the lower horizontal part is 1000 mm, the inclined part is 5950mm, the upper horizontal part is 500mm.
2. The total width of the belt is 165 mm, the distance between the sidewalls is 65 mm.
3. Height from floor to working surface, initial 200mm, final 2805mm
4. The angle of inclination is no more than 26 degrees
5. Supporting the upper branch of the metal sheet 2mm thick.
6. PVC tape Paris with a thickness of 2.4 mm, food grade total width 165 mm, indent at the edges by 20 mm, corrugated board 40 mm high, partitions 40 mm high, 150 mm pitch, 65 mm long.
7. Drum diameter 120mm
8. Geared motor NMRV040-90ob-22Nm-0.25kW / 900-380V-IP54.
9. Nominal speed 0.578m / sec.
10. Drive - belt drive.
11. Stainless steel hopper with a volume of 200-300 liters. Hopper height from floor 1000mm
12. The cost of the conveyor is calculated based on a load of 0.5 kg / rm.
13. There is no reverse
14. Start-stop button.
15. Speed control by frequency converter
16. Stationary
17. All metal parts of the structure are made of black painted steel (except for the hopper).
18. The conveyor is delivered in a disassembled form: the supports are separate from the carrying part.
19. Vibrator MVSI 3/1000-S02
ООО «Энерготех», г.Барнаул
Russia
USD
17128.03/pcs
Mills of medium and fine grinding, air classifiers are used for crushing rocks or plant raw materials, for separating bulk substances by particle size.
ООО «Энерготех», г.Барнаул
Russia
USD
3311.42/pcs
Disintegrators for coarse and medium grinding are designed to obtain powder with particles of 0-0.2 mm. It is used with dry and wet substances depending on the model.
Plant "TEKHPRIBOR" manufactures 5 models of this equipment with a capacity of up to 5 cubic meters per hour.
ООО «Энерготех», г.Барнаул
Russia
USD
1372.53/pcs
Conveyors, feeders and augers are mechanisms for transporting material. Productivity 0.01 - 78 cubic meters per hour. Plant "TEKHPRIBOR" offers:
Screw conveyors, steel, vertical, spiral and others
Flexible screws, variable feed screw feeders
Sluice gates, prescription microdispensers and other equipment.
ООО «Энерготех», г.Барнаул
Russia
USD
3705.36/pcs
The construction drum sand seeder is designed to get rid of building mixes from coarse impurities and break into smaller fractions.
Productivity of the device: 60-75 cubic meters / h. Weight: 950 kg.
Dimensions: 313 x 145.5 x 181 cm.
ООО «Энерготех», г.Барнаул
Russia
USD
1592.91/pcs
The confectionery dough-settling machine Slavyanka-3 is intended for settling products from shortcrust, custard, curd and biscuit dough. Slavyanka-3 makes it possible to produce a wide range of biscuits due to the use of various types of nozzles and shaped dies.
The raw material is loaded into the loading hopper and enters the working chamber, where by means of the piston the mass is pushed through the hoses into the dies (nozzles) and deposited on the baking sheet. At the same time, the piston with the cylinder makes oscillatory movements "up and down", which distinguishes this model from the previous MKT series dough-depositing machines (MKT-120).
This feature of the machine eliminates stress on the hoses (they remain stationary), which increases the reliability and service life of the machine.
ООО «Энерготех», г.Барнаул
Russia
USD
2455.02/pcs
Confectionery dough-settling machine Prima-6 is designed for settling products from shortcrust, custard, curd dough. Works in automatic mode, the number of nozzles is from 6 to 8 pieces.
The dough depositor machine allows you to produce a wide range of biscuits due to the use of various types of attachments and shaped dies.
The jigging machine consists of a loading hopper, a lifting mechanism, a feed table and an electric drive. The hopper is used to load the machine with raw materials (dough, all kinds of fillings) and is a chamber inside which the piston moves. A row of nozzles is located at the bottom of the loading hopper. The piston moves vertically downward translationally and injects the raw material. The molded product comes out through the nozzles onto the feeding table on the baking sheet. The baking sheet is pushed towards itself by hand. The jigging machine is driven by an electric motor.
The model provides for adjustment of the weight and height of the product.
ООО «Энерготех», г.Барнаул
Russia
USD
6702.77/pcs
The wood waste pelleting line is designed for the production of fuel pellets (pellets). Raw materials: wood waste, chips, slabs, balance
The resulting product: pellets with a diameter of 6-8 mm, a length of 10-25 mm
The wood waste pelleting line contains all the areas necessary for the process, ensuring:
Drying of raw materials
Shredding
Moisturizing
Pressing
Cooling and screening
Dosing and packaging
ООО «Энерготех», г.Барнаул
Russia
USD
5.71/pcs
We supply a full range of accessories for electric drives (Tula) in general industrial and explosion-proof design. Quality production, new coatings, hardening.
ООО «Энерготех», г.Барнаул
Russia
USD
161574.39/pcs
Alfa-SPK offers complex automatic lines for the processing of industrial rubber waste. The main activity is the processing of tires that are not suitable for further operation, the processing of tires into crumb with the separation of metal cord and textile threads. The end result of the processing of automobile tires and rubber is rubber crumb, free from foreign inclusions and divided into three fractions: 3-5mm, 1-3mm, 0.1-1mm. The clogging factor of crumb rubber is no more than 3%. Depending on your desire to produce final products from rubber crumb, we can offer you a press for the production of floor coverings (paving slabs) from rubber crumb, using the temperature extrusion method.
Line for processing tires ATR500 line capacity of 500 kg / hour of cleaned rubber crumb broken into fractions, 100 kg / hour of crushed refined textile cord, 150 kg / hour of crushed refined metal cord. Requirements for the room 300m2, height 6 meters, width 10 meters, length 30 meters. Power consumption of the line is 150 kW. The maximum size of used car tires is 22.5. Operating temperature range from -20 to + 40C. The number of required personnel is 4 people. The line has a fully automatic cycle.
ООО «Энерготех», г.Барнаул
Russia
USD
2854.67/pcs
TShPm furnaces with heat output of 0.8, 1.5, 2.0, 2.5 MW, manufactured by OOO PK Altayenergomash, are used for burning bituminous and brown coals. They are completed with steam boilers with a capacity of 1 to 3 t / h and hot water boilers with a heating capacity of 0.63 MW Installed in boiler houses equipped with a fuel supply system to the bunker and an ash removal system.
ООО «Энерготех», г.Барнаул
Russia
USD
143420.09/pcs
The galvanizing section is intended for heating zinc and maintaining the operating temperature of the melt. The site provides for an impulse-type combustion plant with a heat-insulating coating and an autonomous hydrostatic shock tolerance system. The lining material in MC-1 is heat-resistant Skamol super. The galvanizing section includes a drying module, a galvanizing module and a washing / hardening module. BPM-Technologies has developed standard versions of hot-dip galvanizing lines. Galvanizing areas intended for embedding into a specific Line differ in the dimensions of the processed products. Depending on this parameter, the cost of the Galvanizing Site will differ
ООО «Энерготех», г.Барнаул
Russia
USD
2626.3/pcs
The universal press of the new PN-2013 series is equally convenient for the manufacture of furniture facades, doors and door linings, as well as for specific tasks such as the production of triplex glass, molding products from ABS plastic, acrylic and artificial stone. There is a possibility of manufacturing radius facades. In the basic configuration, the press is equipped with an Italian oil rotary vane pump, a system for smooth triac starting of heaters, and disconnecting heaters in three zones.
ООО «Энерготех», г.Барнаул
Russia
USD
2626.3/pcs
A unique press with a pneumatic drive for raising and lowering the working table. A discount is provided for the basic model with a desktop size of 1400x700 mm. The time of the action is limited. Only this press cuts the consumption of PVC film when laminating curved facades by half. In this case, the manufacturing process itself is simplified.
ООО «Энерготех», г.Барнаул
Russia
USD
290.03/pcs
ISTOK control cabinets are low-voltage complete devices ISTOK (NKU ISTOK), which are designed to automate water supply, are installed in wells, water intakes, pumping and sewerage stations, can be equipped with frequency converters, controllers, soft starters.
Low-voltage devices ISTOK provide automatic regulation of pumps, maintaining the required technical parameters.
Automation of pump control can significantly reduce the cost of introducing new and repairing out-of-order equipment for water supply systems.
ISTOK control cabinets are used for frequency regulation of pressure, for pump control in the soft start and stop mode, maintaining the water level within the required limits.
This is a complete device consisting of proven and reliable components, mainly imported.
The installation can be carried out both indoor and outdoor, energy-saving mode at night, automatic pump change and other functions can be provided.
ООО «Энерготех», г.Барнаул
Russia
USD
57093.43/pcs
Design works, water treatment, CO2 free supply, technological equipment for the production of drinks (juice, cold teas, gin-tonics, energy drinks), complete filling line, bottle design, corks, labels, palletizing system, shelving, etc.
FILLING LINES are completed according to the Customer's budget.
The company offers equipment for filling lines only from European manufacturers. The company manufactures conveyor systems at its own production facility. The company also manufactures tank equipment for blending departments, CIP sinks. It repairs technological equipment for bottling lines, ensures the delivery of equipment to the customer's production site, performs customs clearance, service maintenance, and commissioning.
ООО «Энерготех», г.Барнаул
Russia
USD
331.14/pcs
Cutting machines SO-400 of our own production. We produce the following machine models: SO-404B, SO-403V, SO-403G, SO-405E, SO-405M, SO-500. We also produce a cutting machine with a swivel head SOP-405. All machines have two drive belts. The pendulum unit on machine tools is made on bearings. Machine warranty 1 year.
ООО «Энерготех», г.Барнаул
Russia
USD
38.82/pcs
Neutral equipment (tables, racks, sinks, shelves, etc.) for trade and public catering enterprises. All products are made of food grade stainless steel and have all the necessary certificates.
ООО «Энерготех», г.Барнаул
Russia
USD
23.87/pcs
Kitchen tables for catering and trade. The table top is made of high quality stainless steel. The frame, at the request of the customer, can be painted or stainless. All tables can be completed with an additional shelf.
ООО «Энерготех», г.Барнаул
Russia
USD
33.4/pcs
Kitchen shelves are made entirely of food grade stainless steel. At the request of the customer, the legs can be made of painted metal, Dimensions at the request of the customer.
Archival racks (height * length * depth) 2000 * 1000 * 600 on 6 shelves.
ООО «Энерготех», г.Барнаул
Russia
USD
485.29/pcs
We produce refrigerated display cases and counters in various configurations - with a refrigerated bathtub, countertop, etc. and are designed for operational storage, display and distribution of cold snacks and chilled drinks to the consumer.
Each cooling module is equipped with a temperature control system and built-in lighting, and refrigerated display cases additionally have a built-in air circulation system.
Depending on the model, showcases and modules are equipped with guides for trays, neutral shelves and doors with a convenient opening system.
ООО «Энерготех», г.Барнаул
Russia
USD
276.79/pcs
Bain-marie is an equipment designed for preservation and prompt distribution of hot dishes.
We produce both bain-marie for first or second courses, as well as universal steam / combined bain-marie and modules for serving hot drinks or dishes.
Depending on the model, the food warmers are equipped with hotplates with thermostats, sets of gastronorm containers, illuminated shelves, guides for trays, etc.
The food warmers of our production are made of stainless steel and have all the necessary documents.
ООО «Энерготех», г.Барнаул
Russia
USD
242.08/pcs
Frying ovens for canteens and cafes of our production are made taking into account all the requirements and standards of food equipment and meet the most stringent quality standards. Frying cabinet options: - one-section; - two-section; - three-section. All models, regardless of the number of sections, are equipped with upper and lower heating elements with separate temperature control and a system that protects against overheating, and the heat removal system protects the outer surfaces from overheating. Operating temperature range: 20 to 270 degrees C.
The official Qoovee website helps you make profitable deals, find a supplier and manufacturer to grow your business. In the “Directory of suppliers” section you can find for yourself everything you need: Industrial Equipments and Machines from Russia, Kyrgyzstan, Kazakhstan, Turkey, Ukraine and other countries. Product categories are constantly updated. Wholesale suppliers are looking for wholesale purchases and partnerships and are ready for mutually beneficial cooperation.
