Food & agro machinery, equipment in bulk on Qoovee

FIVE-LAYER, hose reinforced with high-strength synthetic thread for watering, pumping and other work with liquids, including food. The inner layer of PVC is opaque, white, has bactericidal properties and prevents the formation of algae inside the hose body and harmful microorganisms. The outer PVC layer is transparent, has special protective additives against external factors, such as ultraviolet radiation, abrasion. Between the inner and outer PVC layers there are two additional layers that prevent the penetration of sunlight and create additional reinforcement to the body of the hose, as well as a textile weave layer that prevents twisting and creasing of the hose. Thanks to high quality indicators this type of hose has high operational characteristics! Characteristics: Product material - (PVC) Polyvinyl chloride Operating temperature -10 ° С / + 60 ° С No harmful substances (Cd), barium (Ba), lead (Pb) Reinforcement “hosiery weaving”, synthetic thread Hose service life not less than 36 months; Available diameters (inch) - ½; ¾; 1. THE INNER LAYER IS ANTIBACTERIAL !!!

A three-layer hose reinforced with high-strength synthetic thread for watering, pumping and other work with liquids, including food. The inner layer of PVC is opaque, black, protects against sunlight and prevents the formation of algae inside the hose body. The outer PVC layer is opaque, painted, has a longitudinal color strip, as well as special protective additives from external factors such as ultraviolet radiation, abrasion. Between the inner and outer PVC layers, a high-strength braided cord made of high-strength synthetic thread is laid. Due to the improved quality indicators, this type of hose has higher operational characteristics (it does not break and does not bend). Characteristics: Product material - (PVC) Polyvinyl chloride Operating temperature -5 ° С / + 40 ° С No harmful substances (Cd), barium (Ba), lead (Pb) Diagonal reinforcement, with synthetic thread UV protection Available diameters (inch) - ½; ¾

A three-layer, reinforced (“hosiery”) high-strength synthetic thread hose for watering, pumping and other work with liquids, including food. The inner layer of PVC is opaque, black, protects against sunlight and prevents the formation of algae inside the hose body. The outer PVC layer is transparent, painted in green. In the production, special protective additives are used against external factors such as ultraviolet radiation and abrasion. Between the inner and outer PVC layers, a high-strength braided cord made of high-strength synthetic thread is laid. Due to the improved quality indicators, this type of hose has higher operational characteristics (it does not break and does not bend). Characteristics: Product material - (PVC) Polyvinyl chloride Operating temperature -5 ° С / + 40 ° С No harmful substances (Cd), barium (Ba), lead (Pb) Reinforcement “hosiery”, synthetic thread UV protection Available diameters (inch) - ½; ¾; 1.

A three-layer hose reinforced with high-strength synthetic thread for watering, pumping and other work with liquids, including food. The inner layer of PVC is opaque, black, protects against sunlight and prevents the formation of algae inside the hose body. The outer PVC layer is transparent, painted in green. In the production, special protective additives are used against external factors such as ultraviolet radiation and abrasion. Between the inner and outer PVC layers, a high-strength braided cord made of high-strength synthetic thread is laid. Due to the improved quality indicators, this type of hose has higher operational characteristics (it does not break and does not bend). Characteristics: Product material - (PVC) Polyvinyl chloride Operating temperature -5 ° С / + 40 ° С No harmful substances (Cd), barium (Ba), lead (Pb) Diagonal reinforcement, with synthetic thread UV protection Available diameters (inch) - ½; ¾; 5/8; 1.

A single-layer hose for watering, pumping and other work with liquids, including food. The hose is available transparent with a green tint. The surface of the hose is smooth. The hose material has increased ductility, as well as special protective additives against external factors, such as ultraviolet radiation, abrasion. Characteristics: Product material - (PVC) Polyvinyl chloride Operating temperature -5 ° С / + 40 ° С No harmful substances (Cd), barium (Ba), lead (Pb) UV protection Reinforcement - no. The let out diameters - ¾ (18 mm)

Pressure and suction hoses These types of hoses are used as flexible pipes for suction, injection and discharge of liquids to which the hose material is chemically resistant, including liquid food products such as drinking water, fruit juices, alcoholic beverages, tinctures, wines with alcohol content up to 25%, ice cream, vinegar, mayonnaise, minced meat, ketchup, vegetable oil and other food products. Pressure-suction hoses are made from food grade plasticized polyvinyl chloride (PVC) reinforced with an impact-resistant PVC spiral. The entire line of these products meets the sanitary-epidemiological and hygienic requirements for goods subject to sanitary-epidemiological surveillance (control). And it has a certificate of state registration of permission to use it for domestic and drinking water supply, including the transportation of seeds, grain and mineral fertilizers.

Designed for unloading eight- and fifteen-ton auto-carriers. The compressor is installed instead of the rotary vane, in comparison with which it has a number of advantages: increased reliability and long service life, provided structurally due to the absence of friction surfaces in the working chamber; there is no need to use a filter and an oil separator, since there is no lubrication in the flow part of the compressor; the unloading time of an eight-ton auto-carrier is no more than 20 minutes, fifteen-ton - 40 minutes. NAME OF PARAMETERS \ MODEL COMPRESSOR GEAR 3AF51K55T Final working pressure, kgf / cm2 1,1 Productivity under suction conditions, m3 / min 4,5 Power consumption at working pressure, kW 14,8 Oil consumption for ablation, g / h 0,45 Compressor shaft rotation frequency, rpm 2700 Air temperature at the compressor outlet, ° С 145 Weight, kg 652 Overall dimensions (length x width x height), mm 1330 x 655 x 940

Rotary compressors and gas blowers are used in aeration systems of fish ponds, potable water storage tanks as well as aeration systems in the sludge pools of treatment facilities, when spraying gardens and crops, in foundries. Aeration is a process of forced saturation of water with air, or oxygen. To ensure this process, a low-pressure compressor or blowers for aeration are used, and its purpose is: Aeration is the process of forced saturation of water with air, or oxygen. To ensure this process, a low-pressure compressor or aeration blowers are used, and its purpose is: Oxidation of iron compounds (water deferrization) and manganese, which consists in the oxidation of iron and manganese compounds with oxygen. As a result, these compounds precipitate in the form of flakes, which are retained by a special filling sediment filter. Removal of dissolved gases, including toxic ones, for example, hydrogen sulfide and methane. Disinfection of water as a result of the destruction of organic substances contained in it, under the influence of oxygen. Removing bio-pollution: when oxygen is saturated with water, the number of beneficial aerobic bacteria that process biomass into carbon dioxide and methane-biogas increases. Now the bio-treatment process is used at all large treatment facilities in Russia. The resulting biogas can also be pumped out of the tanks of treatment plants using blowers for further use, for example, for the production of electricity or fuel for vehicles. However, in Russia this practice is not yet common. Maintaining the pond ecosystem by saturating the water with oxygen. In stagnant water under the influence of sunlight, anaerobic bacteria begin to multiply actively. As a result, the reservoir turns into a muddy swamp with an unpleasant odor. Also, due to insufficient oxygen concentration in the water, pestilence of fish and other beneficial organisms occurs.

MVT36-2-0 Designed for cooling a liquid coolant in air conditioning systems, cooling systems for milk, soft drinks, beer, sparkling wines, oils using an intermediate coolant. It is used on dairy farms, food industry enterprises, in air conditioning systems.

It has a V-shaped design, is able to switch to two modes of operation on R-12 freon. The first allows you to issue cooling capacity of 14.9 kW, spending 5.0 kW. The second mode allows lower rates: 10.5 kW in the cold and 3.4 kW of energy consumption. The FV6 compressor and the FU 12 compressor are one of the most popular models in their segment. They are installed in powerful refrigeration units and units that are used in the Navy, in the metallurgical, mining, chemical, energy industries and special purpose facilities. Spare parts and the complete assembly of the FV 6 Freon compressor can be bought at manufacturer prices from the official distributor of the Refma factory in Belgorod. To contact managers, fill out the contact form, call the above phone numbers or send an e-mail to the company. The FU12 compressor is one of the main elements of the refrigeration unit and serves to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to condensation pressure. Designed to work as part of automated stationary and transport refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL COOLING COMPRESSOR ФУ12 Compressor type Freon compressor, piston, V-shaped, single-stage, cross-axle with external drive. MODE 1 Cooling capacity, kW (kcal / h) 14.9 (12800) Effective power, kW 5.0 Volume described by pistons, m3 / h 62.0 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). MODE 2 Cooling capacity, kW (kcal / h) 10.5 (9000) Power consumption, kW 3.4 Volume described by pistons, m3 / h 41.4 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 16 s-1 (960) (rpm). Cylinder diameter, mm 67.5 Piston stroke, mm 50 Number of cylinders, pcs 4 Freon refrigerant 12 Brand of used oil ХФ12-16 (for R-12) Amount of refilled oil, kg 2.5 ± 5% Weight, kg 90 Overall dimensions (length x width x height), mm 484 x 530 x 426

Compressor FV6. It has an external drive and operates in 3 modes. The first uses R-12 freon. The device is capable of achieving 7.5 kW of cooling capacity, while consuming no more than 2.5 kW of energy. The second mode also includes operation on R-12 freon, but the compressor produces up to 5.35 kW, spending 1.7 kW of energy. The third mode is activated when refueling with R-22. This makes it possible to generate 11.05 kW of cooling capacity, using 4.2 kW of electricity. The FV6 compressor is one of the main elements of the refrigeration unit and serves to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to condensation pressure. Designed to work as part of automated stationary and transport refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL REFRIGERATING COMPRESSOR ФВ6 Compressor type Freon compressor, piston, vertical, single-stage, cross-axle with external drive. MODE 1 Cooling capacity, kW (kcal / h) 7.5 (6500) Effective power, kW 2.5 Volume described by pistons, m3 / h 31.0 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). MODE 2 Cooling capacity, kW (kcal / h) 5.35 (4600) Power consumption, kW 1.7 Volume described by pistons, m3 / h 20.7 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 16 s-1 (960) (rpm). MODE 3 Cooling capacity, kW (kcal / h) 11.05 (9600) Power consumption, kW 4.2 Volume described by pistons, m3 / h 31.0 Cooling capacity and effective power are specified in the mode, ° С during operation on R-22 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). Cylinder diameter, mm 67.5 Piston stroke, mm 50 Number of cylinders, pcs 2 Refrigerant R12 or R22 Brand of used oil ХФ12-16 (for R-12) or ХФ22с-16 (for R-22) Amount of refilled oil, kg 1 , 7 ± 5% Weight, kg 50 Overall dimensions (length x width x height), mm 368 x 324 x 392

The compressor 2FVBS4 / II OM4 is one of the main elements of the refrigeration unit and is used to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to a condensing pressure. Designed to work as part of automated ship refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL REFRIGERATING COMPRESSOR 2FVBS4 / II OM4 Compressor type freon compressor vertical, piston, single-stage, bezreztskopfny glandless. Cooling capacity, kW (kcal / h) 5.2 (4500) Power consumption, kW 2.2 Volume described by pistons, m3 / h 20.6 Cooling capacity and effective power are indicated in the mode, ° C when working on R-12 in the mode: boiling point minus 15 ° С, condensation temperature 30 ° С, suction vapor temperature 20 ° С liquid temperature in front of the throttle device 25 ° С Type of built-in electric motor АПВ2-41-6Ф Electric motor power, kW 2,1 Supply voltage, V 380 Rod alternating current, 3-phase Current frequency, Hz 50 Diameter of cylinder, mm 67.5 mm Ho d piston, mm 50 mm Number of cylinders, pcs 2 Synchronous speed, s-1 (r / min) 16.7 (1000) Volume described by pistons, m3 / h 20.6 Refrigerant R-12 Brand of used oil ХФ12- 16 Amount of refilled oil, kg 2.5 ± 5% Weight (dry) of the compressor, kg 130 Overall dimensions (length x width x height), mm 595 x 370 x 455

Designed to work as part of refrigerators for cooling air or liquid refrigerants with condensers of water or air cooling. Units consist of a compressor, receiver, filter - dryer, instrument panel, pressure gauge shield, connecting piping mounted on the frame. NAME OF PARAMETERS \ MODEL REFRIGERATING UNIT AKP14-15 Cooling capacity, kW * 16.9 Power consumption, kW 5.8 Receiver capacity, l 15 Temperature for nominal operation, ° С To = minus 15 ° С Тk = plus 30 ° С Rated refrigerant R22 freon mode Units are also operable with R12, R502 freon agents. The range of units in other modes is boiling point, ° С - from 10 to minus 40; condensation temperature, ° С - up to 50; ambient temperature, ° C - from 5 to 40; water temperature for cooling the condenser, ° С - up to 33.

Designed to supply air, not containing droplet liquid and mechanical impurities, into the pneumatic system for transporting grain, products of its grinding and other bulk solids. It is applied: at combines of bakery products; in mills, elevators; in feed mills. The compressor can be operated in explosive rooms with a dangerous concentration of dust at an ambient temperature ranging from -10 ° C to + 35 ° C. The compressor consists of a compressor unit, a safety valve and an electric motor located on a common base, which is also a silencer. NAME OF PARAMETERS \ MODEL COMPRESSOR GEAR 3AF49K52С Pressure difference, kPa 40 Productivity, m3 / min 1,54 Power el. engine, kW 2.2 Weight, kg 253 Overall dimensions (length x width x height), mm 1360 x 450 x 780

Rotary labeling machine 10 local - designed for applying polypropylene circumferential OPP labels from a roll to cylindrical PET bottles. The capacity of the machine for a 1.5L bottle is 8,000 bph. SPECIFICATIONS Automatic speed control: Standard speed mode; Operator adjustable speed mode. Manual bottle height adjustment (there is a possibility of making an automatic bottle height adjustment). Application of glue to bottle and label using a spray system. automatic hot glue dispensing station - HOT MELT from NORDSON Glue supply: Hot glue supply through nozzles using a spray system. Adjusting the temperature of the glue in the barrel and in the spray. Hot glue consumption 1kg / 20-35 thousand labels. System for applying a label to the cylindrical part of the bottle: bottle diameter: 50 - 120mm polypropylene label (35 - 50 microns), circumferential for hot glue. length 70 - 380mm height 50-150mm max roller diameter 600mm productivity for a bottle of 1.5 liters 10000 bph. label feeding on vacuum drum air consumption 35 l / min. (6 bar). frame made of stainless steel KO / Inox. Application of glue to bottle and label using a spray system. automatic hot glue dispensing station - HOT MELT from NORDSON 2 m conveyor belt made of plastic or stainless steel. Electronic controls: Machine speed controller Drive - 2.6kW power with inverter. Touch control panel Machine speed indicator. Product counter Electric cabinet integrated with the machine. Pneumatic system of METAL WORK company. EATON electrical equipment The machine is supplied with equipment for one packaging format. The introduction of bottles from the left or right side is made by agreement.

Refrigeration units for outdoor installation Split Ice Box systems are designed to create and maintain a temperature regime inside a refrigerating (freezing) chamber and consist of two parts: a condensing unit outside and an evaporator - inside the chamber, connected by a pipeline. The unit is charged with R404A refrigerant (R507 and R407C refrigerants can also be used). Ice Box C The outdoor and indoor units can be located at some distance from each other. Due to this, split systems can be used for cameras equipped in rooms with wall thickness and ceiling heights that do not allow the installation of monoblocks. Also, split systems are resistant to any atmospheric conditions and can be installed both indoors and outdoors. The electronic control unit of the split-system is installed on the electrical panel, maintains the set temperature in the cooled volume, and turns on the defrosting mode of the evaporator. There are two types of split systems: Ice Box Blue and Ice Box Green - low and medium temperature, respectively. Ice Box C Complete set Ice Box split systems are supplied in the following set: condensing unit evaporator passport (operation manual) Compressors and other components from leading European manufacturers are used in split systems. Produced on the basis of hermetic and semi-hermetic compressors.

LLC Artmash offers an accurate loading auger of its own production with an increased hopper. The product is designed for use in the production lines of feed pellets and fuel pellets. The auger is not afraid of debris entering the pellet raw materials, provides high line productivity up to 3 t / h. The screw model with engine speed control is equipped with a worm gear. Video with reviews of our customers Characteristics of auger accurate loading: Voltage: 380 V Engine power: 1,1 kW + 0,55 kW Productivity: up to 5000 kg / h Weight: 210 kg Hopper volume: 1.3 cubic meters Dimensions: 2750 * 1150 * 1850 mm

"Altai" -zonator, has a guarantee of 36 months. Service life is 8-10 years. It has 2v1 technology (ozonizer and ionizer in one case). A wide range of applications: • Disinfection and deodorization of air in residential premises, cabins, cabinets, refrigerators; • Destruction of cigarette smoke; • Purification of food products (meat, fish, eggs, vegetables and fruits); • Improving the quality of water (disinfection, oxygen enrichment, elimination of chlorine and other harmful impurities); • For processing of technological premises, warehouses, cold rooms, technological equipment, destruction of surface mold and defenolization of premises. OZONE PROPERTIES Removal of microorganisms: • Kills 99.7% of E. coli bacteria and 99.9% of staphylococcus colonies on the surfaces of objects. Fight against fungi and mold: • Kills 100% of aspergillus, white mold and fusarium oxysporum. Destruction of viruses. Fight against odors and toxic substances. hormones and preservatives • Oxidizes heavy metals and organic compounds

Упаковочный ПЭТ лента. Ширина 16 см Толщина 1 Обмотка рулона 1000м Вес рулона 20-21кг Цвет черный. ПЭТ лента это-современный и практичный упаковочный материал, применяемый во всем мире. Высокая прочность, устойчивость к ударным нагрузкам, агрессивным средам,пластичность и легкость-основные качества этого универсального материала, который используется в различных отраслях промышленности для упаковки металлопроката, металлургического оборудования , стройматериалов, бытовой техники, изделий из древесины, кирпича, хлопковых кип и др. Применяется там, где просто необходима бережная и прочная стяжка с фиксацией продукции для обеспечения безопасной транспортировки или хранения. Основные преимущества ПЭТ ленты; 1. Не облабевает и не вытягивается; 2. Удобство в работе при транспортировке и хранении ( вес лент ПЭТ в 10 раз ниже, чем стальных; отсуствие острых кромок исключает возможность порезов; лента не ржавеет в процессе хранения); 3. Экономичность ( с учетом более высокой устойчивости лент ПЭТ к динамическим нагрузкам стоимость упаковки ими грузов на 20-30% ниже, чем стальными); 4. Сохраняет натяжение даже при крайних значениях температуры от -60 С +90 С ;

"ALTAI" is an ozonator with a 36 month warranty. Service life 8-10 years. Has 2in1 technology (ozonizer and ionizer in one housing). Wide range of applications: • Disinfection and deodorization of air in living quarters, change houses, cupboards, refrigerator; • Destruction of cigarette smoke; • Purification of food products (meat, fish, eggs, vegetables and fruits); • Improving water quality (disinfection, oxygen enrichment, elimination of chlorine and other harmful impurities); • For the treatment of technological premises, warehouses, cold rooms, technological equipment, destruction of surface mold and dephenolization of premises. OZONE PROPERTIES Removal of microorganisms: • Kills 99.7% of E. coli bacteria and 99.9% of staphylococcus colonies on the surfaces of objects • Destroys spores of brevibacteria Fight against fungi and mold: • Kills 100% of Aspergillus, white mold and fusarium oxysporum fungi Destroys 99% of hepatitis • Kills 99% HBsAg and 100% HAAg • Kills influenza and SARS viruses • Kills polio and rotavirus viruses in water within minutes Fight odors and toxic substances • Decomposes pesticides, hormones and preservatives • Oxidises heavy metals and organic compounds • Eliminates odors.

You need a service lift? You can order a service lift suitable for multiple movements of small loads and in various fields of activity. We offer a wide range of service lifts for commercial and non-commercial structures. Regardless of whether you are looking for a lift for efficient transportation of food between the kitchen and the dining room in a restaurant, or looking for an installation in your private home, our proven service can guarantee that your needs will always be fully met. Small service freight lifts also matter in many other environments that may not immediately come to mind. For example, they can be used to transport goods in a store, move office supplies between office floors, or move records in a medical center or hospital. Because of their flexibility, service elevators, as a rule, are of great help to any business environment. Our reliable micro-lifters have long been used in many establishments throughout Russia and in the countries of the Customs Union, so you can always be sure that you will receive equipment and service of the highest quality. quality. For more information, please contact us.

If a lot of cars constantly accumulate at your warehouse terminal and they stand idle in the queue for unloading and reloading cargo, your tired porters with boxes in their arms are exhausted, and forwarding drivers are already asleep. It's time to think about the profitability of the warehouse terminal. A re-equipment of an outdated farm is necessary in order to increase the productivity of all processes and automate them as much as possible. Our production is ready to solve all the problems of unloading and transporting goods at your warehouse terminal or production warehouse and we offer individual production of cargo lifts for a warehouse at an affordable price. lifting and lowering loads in warehouses when loading / unloading cargo vehicles and during the movement of goods inside the warehouse A. Application options: Ensuring the shipment of goods to customers Ensuring the unloading of vehicles and moving goods to the basement or upper floors. Inside the warehouse movement of goods in multi-level warehouses. Installation options: On the facade of the building. Inside the building. Fastening to the supporting walls. p 10 tons Small-sized freight elevators with a loading capacity of 500 kg Console lifts from / p to 2 000 kg Two-masted from / p to 5 00 0 kg Mine elevators with / p 5000 kg Specifications scissor capacity up to 10 000 kg mine load capacity up to 5000 kg mast lifting capacity up to 2000 kg lifting height according to the specification the size of the cargo platform for TK

Single-mast lifts to order for any objects! We always take into account your wishes and are ready to make the production of single-mast lifts of any configuration, taking into account the characteristics of the installation site. This task with all its responsibility. Your goal is to get reliable equipment to perform production tasks. Our job is to provide the optimal solution as quickly and accurately as possible. What kind of lifts we offer: Affordable and reliable For lifting loads, they are easy to install both outside and inside buildings With a lifting capacity of up to 2000kg and the size of the platform you ask, based on your needsEquipment installation services on your turnkey facility. We appreciate your time! You can always contact the employee assigned to you to resolve any issues at any time convenient for you. What are the advantages of a single-mast lift? Security! Compliance with all existing standards; Saving! In comparison with other types of lifts, the single-mast significantly lower price; Convenient installation! The mast of the lift is attached to the ceiling or to the wall of the building with brackets; Convenient loading and unloading! These operations can be performed from three sides; Specifications loading capacity from 200 to 2000 kg lifting height from 3 to 150 meters cargo platform for TK

Two-mast cargo lifts are manufactured according to the TOR to calculate the cost and production time, the form of technical requirements is filled in, where you need to fill in the parameters: load capacity, lifting height, dimensions of the loading platform, the presence of hinged boards, the way of opening doors, the number of fixed stops, what drive is needed. Lifts were delivered across the country from the western regions to Vladivostok. An invaluable experience has been accumulated in this field of activity, the installation teams also know every millimeter of this equipment and are ready to cope with any fairly heavy object. We accept applications for two-masted cargo hoists and are ready to ensure timely and high-quality manufacturing and delivery. In the TZ it is necessary to note all the options that you want to see in the lift, and also to note all the wishes to the smallest detail, since in the end you will get exactly what you need. The double-masted lifts are made in the period from 15 to 30 working days, all dates are fixed in supply contract. The lifting capacity of the two-masted lift can be from 500 to 3000 kg, the height of the lifted load from 3 to 80 meters. After production, you will receive a passport and a certificate for a lifting mechanism. The main points during the filling are the lifting height of the loading platform, the load capacity, the place of installation of the lift (street or inside the building). The cargo platform can have folding sides of the height you need, a door. Specifications Load capacity, kg from 500 to 3000 Height of rise, m to 80 Lifting speed, m / s 0.16